Latest sealing trim Tenders | Government sealing trim Tenders

Central Government/Public Sector

CTN :40123023

03 May, 2025 NA

Ahmedabad - Gujarat

Tender For supply of set of copper sealing washer for wag9 locos, set consists of 02 items as follows:- (1)sealing washer 'a' dia: 68x60x2.5mm th ick material copper, din-7603 as per clw drg. no. 1209-01-013-014 alt-7 ref-16 - 12 no/set (2) sealing washer 'a' dia 32x27x2.0 mm thick mate rial copper, din-7603 as per clw drg. no. 1209-01-013-014 alt-7 ref-17 - 06 no/set. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40140779

17 May, 2025 1.19 Crore

Dhubri - Assam

Tender For supply of commissioning of gi pipe earthing , supplying and laying 25 mm x 3 mm copper strip , sitc of 5 kg abc or co2 type fire extinguishers , design, manufacturing, supply, installation, testing and commissioning of environmental friendly aerosol based fire suppression system , supply, installation, testing and commissioning of conventional agent release control panel with battery back up for 30 minutes in alarm condition , supply, installation, testing and commissioning of conventional type en listed or equivalent indian standard ip based optical smoke detectors , supply, installation, testing and commissioning of conventional type en listed or equivalent indian standard ip based heat combination detectors , supply, installation, testing and commissioning of en listed or equivalent indian standard ip based manual release switch , supply, installation, testing and commissioning of en listed or equivalent indian standard ip based manual abort switch , supply, installation, testing and commissioning of en listed or equivalent indian standard op based manual call point, , supply, installation, testing and commissioning of en listed or equivalent indian standard ip based conventional sounder cum strobe , supply, installation, testing and commissioning of gas discharge identification signage , supply, installation, testing and commissioning of addressable ip based multi photo electric or optical smoke detector or fire sensor , supply, installation, testing and commissioning of auto dialer unit , supply, installation, testing and commissioning of ip based addressable manual call point , supply, installation, testing and commissioning of ip based addressable horn cum strobe , supply, installation, testing and commissioning of fire alarm armoured cable , supply, installation, testing and commissioning of response indicator on surface or recess ms box , supply, installation, testing and commissioning of supporting tube for hvi long conductor , supply, installation, testing and commissioning of elevation pole made of gi material having isi marking , supply, installation, testing and commissioning of fixing clamp with tensioning strap, for fixing combi supporting tubes , supply, installation, testing and commissioning of high voltage resistant insulated down conductor , supply, installation, testing commissioning of conductor holder for installation of the hvi conductor in explosion hazardous areas ex zone 1 , supply, installation, testing and commissioning of connection elements for sealing the hvi long conductor on both ends, for implementing the sealing end of the conductor in the supporting tube , supply, installation, testing and commissioning of connection elements for sealing the hvi long conductor at both ends, , supply, installation, testing and commissioning of fixing kit for hvi long conductor black or grey , supply, installation, testing and commissioning of eb connection element for discharging the electric field of the hvi long conductor in the sealing end range. , supply, installation, testing and commissioning of lightning strike counter for digitally recording impulse currents the counter is preferably installed on the down conductors , supply, installation, testing and commissioning of uni disconnecting clamps with intermediate plate as test link for round and flat conductor of material , supply, installation, testing and commissioning of copper bonded rod , supply, installation, testing and commissioning of poe surge arrester of class d m surge arrester, class d spd , supply, installation, testing and commissioning of rj45b 48 surge arrester of class d m surge arrester, class d spd , supply, installation, testing bid details/ 2 / 40 and commissioning of 3 phase or type 1 plus 2 kema certified lightning current and spd , supply, installation, testing and commissioning of gi pipe with socket and reducer , supply, installation, testing and commissioning of gi pipe with suitable gi base plate to mount 4 inch gi pipe siz

Central Government/Public Sector

CTN :40062102

15 May, 2025 NA

Mandal - Gujarat

Tender For corrigendum : tmpl/pur/rc/jhonson pump spares/718/339 - ccr modelsmodel -1: ccr 40c-160 r1 m2 l3, tag no: 7p 1 a/b/c, application: unclarified pregnant solution pumps (upl) pumps, shaft sleeve (ss 431), smothering bush/throttle bush, mechanical seal, mech. seal cover (steel), dowell pin m2, gasket m2, socket head plug, gasket (shaft sleeve), gasket (impleller), socket head plug m2, gasket/sealing ring, male connector, pipe, extension piece, stud s4, nut, washer, impeller cap nut, key (impeller), pump casing/ housing, stuffing box, impeller ss316, impeller (wcb), leg/ bracket support, gasket (pump casing), plug, plug, sealing ring/ gasket, allen screw/bolt, bearing housing, bearing cover, bearing cover, oil baffle/catcher, oil filling plug (pp), oil leveler, plug (magnetic drain plug), gasket (brg. cover), grub screw, pump shaft, coupling key, spalsh ring, internal circlip, dist. sleeve, lock nut, lock washer, allen bolt, allen bolt, model -2: ccr 80-250 r1 m2 l3, tag no: 7p 9a/b/c/d, application: filtrate pumps, shaft sleeve (ss 431), smothering bush/throttle bush, mechanical seal, mech. seal cover (steel), dowell pin m2, gasket m2, socket head plug, gasket (shaft sleeve), gasket (impleller), socket head plug m2, pipe, male connector, extension piece, stud s4, nut, impeller cap nut, key (impeller), pump casing/ housing, stuffing box, impeller ss316, impeller (wcb), wearing ring, leg/ bracket support, gasket (pump casing), plug, plug, allen screw/bolt, bearing housing, bearing cover, oil baffle/catcher, oil filling plug (pp), oil leveler, plug (magnetic drain plug), gasket (brg. cover), grub screw, pump shaft, coupling key, spalsh ring, internal circlip, dist. sleeve, lock nut, lock washer, allen bolt, allen bolt, washer, model -3: ccr 50c-160 r1 m2 l3, tag no: 7p 7a/b, application: clarified pregnant solution pumps, shaft sleeve (ss 431), smothering bush/throttle bush, mechanical seal, mech. seal cover (steel), dowell pin m2, gasket m2, socket head plug, gasket (shaft sleeve), gasket (impleller), socket head plug m2, pipe, male connector, extension piece, stud s4, nut, impeller cap nut, key (impeller), pump casing/ housing, stuffing box, impeller ss316, impeller (wcb), leg/ bracket support, gasket (pump casing), plug, plug, allen screw/bolt, bearing housing, bearing cover, oil baffle/catcher, oil filling plug (pp), oil leveler, plug (magnetic drain plug), gasket (brg. cover), grub screw, pump shaft, coupling key, spalsh ring, internal circlip, dist. sleeve, lock nut, lock washer, allen bolt, allen bolt, washer, model -4: ccr 80-160 r1 m2 l3, tag no: 7p 3a/b, application: pre coat material solution feeding pumps, shaft sleeve (ss 431), smothering bush/throttle bush, mechanical seal, mech. seal cover (steel), dowell pin m2, gasket m2, socket head plug, gasket (shaft sleeve), gasket (impleller), socket head plug m2, pipe, male connector, extension piece, stud s4, nut, impeller cap nut, key (impeller), pump casing/ housing, stuffing box, impeller ss316, impeller (wcb), wearing ring, leg/ bracket support, gasket (pump casing), plug, plug, allen screw/bolt, bearing housing, bearing cover, oil baffle/catcher, oil filling plug (pp), oil leveler, plug (magnetic drain plug), gasket (brg. cover), grub screw, pump shaft, coupling key, spalsh ring, internal circlip, dist. sleeve, lock nut, lock washer, allen bolt, allen bolt, washer, model -5: ccr 80c-200 r1 m2 l3, tag no: tag no: 8p- 5a/b & 8p-6a/b, application: clarified hot liquor transfer pumps & caustic feed pumps, shaft sleeve (ss 431), smothering bush/throttle bush, mechanical seal, mech. seal cover (steel), dowell pin m2, gasket m2, socket head plug, gasket (shaft sleeve), gasket (impleller), socket head plug m2, pipe, male connector, extension piece, stud s4, nut, impeller cap nut, key (impeller), pump casing/ housing, stuffing box, impeller ss316, impeller (wcb), wearing ring, leg/ bracket support, gasket (pump casing), plug, plug, allen screw/bolt, bearing housing, beari

State Government

CTN :40125270

05 May, 2025 70.0 Thousand

Meerut - Uttar Pradesh

Tender For supply of polycarbonate seal - 1- seals should be made of high quality of uv stabilized polycarbonate plastic materials (engineering plastic), which shall give complete visualization of its fixing mechanism and shall show clear indication if tampered and it should not be effected by boiling water etc- the seal must be able to withstand harsh environment direct sunlight exposure.the seal will be tamper evident with double locking system with additional third locking system facility, which works when the double anchor system is put in place with the female part of the seal. the seal should be transparent clear. the seal should be of one- piece polycarbonate body consisting of capsule and double locking anchor having stainless steel twisted wire (two stained) of 20 cm long molded itself in the temper proof seal male part. the wire should be non-corrosive and nonmagnetic made of 304 grades. sequential serial nos. of one alpha and six numeric numbers to be provided on the female part. the seal should have high rise molded logo be embossed of purchaser and companys name one each side of the seal. the provision for tamperproof sticker signature in the field of13.5mm x 21.5mm should be given, as and when the purchaser requires the need for the same for its proper utilization. the sealing arrangement should be such that its original position cannot be restored after any effort of tamper or breaking of the seals. the third lock as said should work as deterrent for opening the main male & female part of the seal.packaging: the seal should be supplied in packet of 100 seals. each packet shall be labeled for following information., 1.1- the seal should have following essential features.a. tamper resistanceb. heat resistance c. environmentally safed. should withstand direct sun light & rain water exposuree. tamper evident: material must show clear sign of tampering when material is compromised by penetration, drilling cutting, bending or pulling etc.f. one end of the wire should be loose and other end of wire should be permanently fixed on the upper part of female body passing thru the male part of sealg. ultra violet ray resistant h. must have third lock to secure male & female part from tampering.the sealing mechanism should be such that it can be sealed without using any pliers or tools. the sealing procedure must be fool proof and there should not any scope of pre tampering/malpractice with sealing wire while sealing.above mentioned essential features of seal must be verified by approved laboratory test report including melting point test, boiling water test, temperature with stand test etc.construction: one piece construction comprising of polycarbonate capsule & anchor and integrally connected pin part lock & non corrosive & nonmagnetic 2 strand twisted stainless steel sealing wire, all these features molded into one piece {called seal}capsule: contains and internal locking mechanism which accepts the anchor and permanently secure the sealing wire.anchor: the locking cap shall have double anchors, which secures the loose end of the sealing wire into the capsule locking mechanism.pin lock: lt is molded in the seal at time of manufacturing of the said seal and passes. through female part and locks the male part and secures the seal at the operational level

State Government

CTN :40138123

16 May, 2025 NA

Daman - Gujarat

Tender For purchase of dental material for chc moti daman - dental materials, diamond bur br- 41 [1pkt= 5 nos], diamond bur br- 42 [1pkt= 5 nos], diamond bur br- 45 [1pkt= 5 nos], diamond bur sf- 11 [1pkt= 5 nos], diamond bur si- 47 [1pkt= 5 nos], diamond bur tr- 12 [1pkt= 5 nos], glass inomer luting cement type 1, glass inomer cement type 2, radiopaque high strength posterior glass ionomer restorative cement {type 9}, glass inomer light cure cement, radiopaque silver alloy glass ionomer restorative cement powder [miracle mix], pit & fissure sealant, tetric n bond universal 6gm, carbamide peroxide lubricating edta paste 3g (rc help), calcium hydroxide with iodoform (1 box of 2 syringe of 2.2gm/ disposable tip 20ea) [metaplex] metapex plus 4.4, calcium hydroxide paste 2g (rc cal)/ intracanal dressing paste, root canal sealing materials tube paste a 4ml/ tube paste b 4ml/ 1 mixing pad [ah plus], composite polishing kit {pre polishers+gloss polishers+high gloss polishers}, prophylactic polishing paste 10gm, temperory filling materials 40gm(orafil g), protaper endofiles 25mm sx-f3[s1,s2,f1,f2,f3,sx], protaper endofiles 25mm f1, protaper endofiles 21 mm f1, short barbed broaches 21mm 2-4 [1 pkt= 6pcs ], k file no.15 21mm (1x6 pic/pkt), k files no.15-40 21mm (1x6 pic/pkt), flowable light cure composite filling shade a2, light cure composite restoration shades a1, light cure composite restoration shades a2, light cure composite restoration shades a3, light cure composite restoration shades a3.5, light cure composite restoration shades b2, light cure composite restoration shades b1, gutta percha points iso colour coded no- 15 (1 pkt of 120 pcs), gutta percha points iso colour coded no- 15-40 (1 pkt of 120 pcs), gutta percha points iso colour coded no- 20 (1 pkt of 120 pcs), gutta percha points iso colour coded no- 25 (1 pkt of 120 pcs), gutta percha points (2%) iso color coded no.30 (1 pkt of pcs), gutta percha points (2%) iso color coded no.35 (1 pkt of pcs), gutta percha points (2%) iso color coded no.40 (1 pkt of pcs), gutta percha points (2%) iso color coded no.45 (1 pkt of 120 pcs), bond applicator tips (1x100), rvg sleeves medium {1pkt = 500}, sodium hypochloride 5% 500ml, polishing brush /cup {1pkt=5 pcs}

Central Government/Public Sector

CTN :39909992

30 Apr, 2025 NA

Ambedkar Nagar - Uttar Pradesh

Tender For corrigendum : supply of sealing material tdaggmv803060v0001 8 ge m4303703149 , adj scrw tdaggmv803060v 1 30 ge m4303703160 , csg sliding elem tdaggmv803060v 1 34 ge m4303703164 , exp stud bolt tdaggmv803060v 1 53 ge m4303703168 , hex soc hd cap nut tdaggmv803060v 1 54 m4303703169 , seal ddf tdaggmv803060v 1 67 ge m4303703177 , elogat stud tdaggmv803060v 1 68 ge m4303703178 , hex nut tdaggmv803060v 1 66 ge m4303703176 , seal ring dn630x6 tdaggmv80306v 1 77 ge m4303703183 , cyl com spring tdaggmv803060v 1 78 ge m4303703184 , locking bolt tdaggmv803060v 1 79 ge m4303703185 , hex hd scr tdaggmv803060v 1 80 ge m4303703130 , hex nut t1 tdaggmv080060v 1 81 ge m4303703132 , hex hd scr tdaggmv803060v 1 82 ge m4303703133 , guide ring tdaggmv803060v 1 83 ge m4303703134 , shim tdaggmv803060v 1 86 ge m4303703137

Central Government/Public Sector

CTN :40121944

23 May, 2025 NA

Erode - Tamil Nadu

Tender For set of sealing washers for gear cases of wag9hc locos consisting of 1)sealing washer type a dia.68/60 x 2.5mm t hick. as per din 7603; material: copper - 12 no/set 2) sealing washer type a dia.32/27 x 2mm thick. as per din 7603; material: c opper - 06 no/set. note: one set sample to be got approved before effecting bulk supply. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40122911

02 May, 2025 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of teflon tape, 3 mills thick and 1 inch width, and 9 metres long in a roll material: un sintered poly tetra fluoro ethlyne (ptfe) tape for thread sealing application conforms to spec ification no - is: 14643-1999. [ warranty period: 30 months after the date of delivery ]

CTN :40107163

26 May, 2025 NA

Kharagpur - West Bengal

Tender For supply of - poh kit for irs's design isolating cock (ball type) consisting of 3 (three) items. drawing no.:- as per kit details. material and specification :- as per drawing and conforming to 02-abr-02, amend. no. 4 of sept. 2016, with appendix- i. warranty / guarantee :- 36 months from the date of delivery or 24 months from the date of commissioning for all components whichever is earlier. kit details :- sl. no.item drg./part no. qty/set, 01. seat ring rdso 's drg. no. sk- 97003, alt. 5 , item no. 4.2 nos., 02. sealing washer rdso 's drg. no. sk-97003, alt. 5 , item no. 5. 1 no., 03. gland packing rdso 's drg. no. sk-97003, alt. 5 , item no. 8.2 nos. 2. item details s.no.pl code (group) item type gst(y/n) stock / nonstock orderingconsider for eval approving agency inspection agency currency allowed estimated rate 138161035goods (y)stock---yesrdsotpi agencyinr description :poh kit for irs's design isolating cock (ball type) consisting of 3 (three) items. drawing no.:- as per kit details. material and specification:- as per drawing and conforming to 02-abr-02, ame nd. no. 4 of sept. 2016, with appendix- i. kit details :- sl. no.item drg./part no. qty/set, 01. seat ring rdso 's drg. no. sk-97003, alt. 5 , item no. 4.2 nos., 02. sealing washer rdso 's drg. no. sk-97003, alt. 5 , item no. 5. 1 no., 03. gland packing rdso 's drg. no. sk-97003, alt. 5 , item no. 8.2 nos. [ war ranty period: 36 months after the date of delivery ]

CTN :40094204

06 May, 2025 NA

Rourkela - Odisha

Tender For supply of unsintered poly tetra fluoro ethylene (ptfe) tape for thread sealing applicatio n size- 25 mm wide x 10 mtrs.x 0.075 mm thick. material and specification: is - 14643/99 ]

Sealing Trim Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors