Get complete information related to latest Sealing Wire Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Sealing Wire Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Sealing Wire Tenders.
Tender For annual rate contract for supply of electrical goods for street light and other electrical work in visnagar nagarpalika - supplying of double walled corrugated pipes (dwc) of polyethylene (conforming to is 14930 ii )with necessary connecting accessories of same material at required depth in existing trench for laying of cable. below ground / road surface for enclosing cable ((a)50 mm outer dia, supplying of xlpe (is:7098) (i)-88 isi armoured cable multistrand / solid aluminium conductor for 1.1 kv. to be laid on wall with necessary clampsor in existing trench / pipe of following size of cables (c) 4 core 10 sq. mm, supplying of xlpe(is:7098) (i)-88 isi unarmoured aluminium cable 1.1 kv.grade to be erected as directed of following size.(a) 2 core 2.5 sq. mm, supplying of xlpe(is:7098) (i)-88 isi unarmoured aluminium cable 1.1 kv.grade to be erected as directed of following size. (b) 2 core 4 sq. mm, supplying of flexible pvc insulated multi strand multi core 1.1 kv grade isi marked copper wires of following size to be erected as directed. (e) 1.50 sq.mm 3 core round pvc sheathed, supplying of flexible pvc insulated multi strand multi core 1.1 kv grade isi marked copper wires of following size to be erected as directed. (h) 2.50 sq.mm 3 core round pvc sheathed, supplying single phase ccms, supplying three phase ccms, repairing of single phase ccms, repairing of three phase ccms, supplying approved make smc press moulded composite frp. loop-in, loop-out approx. 2mm thick box complete with bakelite connector strip 5way(3pplusnpluse),din rail for mounting mob and hinged doors as per requirement having locking arrangements with mounting clamp with nuts, bolts and washers suitable for erection on pole with cable clampsand earth bolt of following size of box.(b) 250mm x 200mm x 100mm [deep], supplying approved make digital time switch having lithium cell 6 years operative and operate battery backup 1 channel day clock with 14 memory programme, suitable to operate on 240v plus 5., 16a with, floating contacts minimum switching setup time 1 minimum and lcd display. also comprised permanent on/off switching. programming switches and housed in fire proof thermoplastic enclosure and transparent cover erected as required with necessary connection erected as directed., supplying electrical insulation l.t. tape role with isi marked having nominal width 1.8 cms nominal length 8.0 mtr nominal thickness 0.125 mm and having self adhesive pvc, plyer 8" (taparia), tester (taparia), screw driver 12" (taparia), safety gloves 11kv, safety shoes, supplying ac-3 duty 3 pole power contactor with 2 no and 2 nc auxcontacts complete with 415v/220v operating coil suitable for (landt, bch,t.c., siemens, cands make). (a) for 25 / 32 a rating, supplying ac-3 duty 3 pole power contactor with 2 no and 2 nc auxcontacts complete with 415v/220v operating coil suitable for (landt, bch,t.c., siemens, cands make). (c) for 60 / 70 a rating, supplying ac-3 duty 3 pole power contactor with 2 no and 2 nc auxcontacts complete with 415v/220v operating coil suitable for (landt, bch,t.c., siemens, cands make). (e) for 110 a rating, supplying miniature circuit breaker single pole 6a to 25a suitable to operate on 240 v a.c. system and having breaking capacity 10 ka to be erected in existing box. confirming to is 8828/1996 with isi mark cat.iii, supplying 240 v mcb double pole switch for lighting load (b curve) having 10 ka breaking capacity and confirms to is : 8828 in existing box having following capacity (a) 6 to 32 amp.cat.iii, supplying 240 v mcb double pole switch for lighting load (b curve) having 10 ka breaking capacity and confirms to is : 8828 in existing box having following capacity (b) 40 amp. cat.iii, supplying 415v mcb four pole switch for lighting load (b curve) having 10ka breaking capacity and confirms to is :8828 in existing box having following capacity (a) 6 to 32 amp. cat.iii, supplying 415v mcb four pole switch for lighting load (b curve) having 10ka breakin
Tender For manufacture & supply of polycarbonate, transparent, numbered security seals for energy meter duly engraved with hescom logo along with sealingwire made of non-corrosive, non-magnetic stainless steel as per specification - polycarbonate platic seal
Tender For quotation for "location and rectification of cable faults on aluminium armoured lt power cables laid in trench at breakwater and mole berth"
Tender For supply of periodical repair maintenance and operation of power supply , operation and maintenance of roof top solar plant , repair of earth pits , supply of transformer oil , dehydration and filtration of transformer oil , provision of silica gel , service charges for locating pin pointing of fault in lt cable , service charges for locating pin pointing of fault in ht cable , supplying and making indoor cable end termination 35 sq mm , supplying and making indoor cable end termination 185 sq mm , supplying and making straight through cable jointing 35 sq mm , supplying and making straight through cable jointing 185 sq mm , servicing checking and testing of lt circuit breakers upto 1600 amps , servicing checking and testing of lt circuit breakers above 1600 amps and upto 3200 amps , servicing checking and testing of 11 kv ht circuit breakers upto 800 amps biecco lawrie make , servicing checking and testing of 11 kv ht circuit breakers 630 amp rmu with sf6 insulating medium , supply of the following spares jaw contacts 1 set upto 1600 a , supply of the following spares pole assembly include 1 fixed contact upto 1600a , supply of the following spares jaw contacts 1 set above 1600 a and upto 3200 a , supply of the following spares pole assembly above 1600 amps and upto 3200 amps , inspection servicing testing and calibration of idmt relays , inspection servicing testing and calibration of idmt relay , inspection servicing testing and calibration of protection relays , inspection servicing testing and calibration of digital protection relays , transformer oil leakage repair of lv side of transformer upto 500 kva , transformer oil leakage repair of lv side of transformer above 500 kva upto 2000 kva , servicing checking and testing of the following 250 kva servo for mssr , complete item of cpwd schedule of rates electrical 2022 ) /bid number : gem/2025/b/6662944 * /dated: 09-09-2025 & & / bid document 1 / 23
Tender For laying of power cable from lt mcc panel to chlorine room panel ,electrical wiring of the room and other allied works at bijaynagar water supply scheme.
Tender For supplying and fixing of led street lights in municipal area kuchaman city - providing & fixing of ik08, ip 66 protected led street light luminaire on existing bracket/pole. fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with uv stabilized pc (uv stablization report submitted for uv cover ) /toughened glass cover and secondary lens on each led & should be smd type of 3 to 5 watt each . the system efficacy >=125 lm/ wt and potted driver & has a unique bis r number with input voltage ac 120 to 270 v ac with high voltage cutoff @>=300 v ac and auto resetting safety , power factor >0.95 driver efficiency >85% ,thd(i) 10% humidity 10% to 90% rh working temp -5c to 45c . driver current 750ma. the luminaire shall be bis certified and trade mark certified. life expectancy equal or more than 50000 burning hrs with minimum 70% lumen maintened , cri >70 and cct 5700k +355k. surge protection shall be min 4 kv internal and min 10 kv external inside driver compartment. driver should be phase to phase protection of 440 v for 4 hrs. manufactures word mark/name engraved/embossing on die cast housing to allow traceability/authenticity. fixture shall be as per is 10322 complianced.oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate/ report with liable warranty of product/accessories from oem shall be submitted. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsrled street light fixture with minimum lumen output 2450 lm, led street light fixture with minimum lumen output 3700 lm, supplying and drawing of xlpe insulated lt aerial bunched aluminium conductor cable confirming to is 14255/1995 and is 398 (pt-4)/ 1994 and as per discom specs. on existing cross arms through i hook with all necessary t&p required including binding and twisting etc. complete in all respect as required. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .1 x 25 sq. mm. + 1x25 sq. mm. (insulated), providing & fixing of street light bracket made out from following size of b class , medium class g.i. pipe confirming to is : 1239 p - 1 ( 2004 ) with heavy duty pole clamp, saddles suitable fastners etc. as required. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 25 mm dia, supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.90 % purity copper, class 5 stranding in acc. to is:8130/iec 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation pvc type a/c/d , flame retardant as per is 10810-53, better amperage rating as per is:3961 part 5, in existing surface or recessed pvc/ ms conduit/casing capping making connections with copper lugs of suitable size, ferrules,testing etc. as required. oem must have its own in housenabl lab setup for all testing facilities for wires. for additional technical parameters of product / work refer annexure a attached with this bsr2 x 1.5 sq.mm, providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed unarrmoured aluminium cable confirming to is:1554 p-i / is :7098 p - i of 1.1 kv with h4- grade electrolytic aluminium conductor confirming to is 8130 of purity >99.6 %, inner / outer sheath confirming to is:5831 in existing rcc / hume / stoneware / pvcpipe/ open duct/cable trench / cable tray (with cable tie) including testing etc. as required of following size. oem must have its own in house nabl accrediated laboratory for testing procedure as per is:10810. for additional technical parameters of product / work r
Tender For corrigendum : provision of external electric supply for 661 sailors inliving accommodation at visakhapatnam - supply, installation, testing and commissioning of outdoor type step down transformer 1000 kva 11kv/433v dyn11 oil filled (onan) distribution transformer double copper wound with radiator wall with conservator tank & porcelain bushing for ht, lt with off circuit tap changer, marshalling box all as per is 1180 (part-1) : 2014, bee certified, energy efficiency level ii (as per latest ammendment no 4) complete as directed., a) off circuit tap changer (octc), tapping range +5% to -10% in a steps of 2.5% per step (7 positions)b) temp. rise shall be 40/45 deg. c for oil/winding resp. over an ambient of 50deg.c tempc) insulation class: ad) losses ( subject to is 1180 efficiency level 2/ star 2 as per latest amendment 4) max. total loss @ 50% loading: 2620 w and max. total loss at 100% loading: 7000 w.e) % impedance (%z) shall be 5.00% (subject to is tol.)f) rating & diagram (r&d) plate (fitted on transformer)g) oil temp. indicator (oti) with alarm and trip contacth) winding temp. indicator (wti) with alarm and trip contactj) rated temp class of transformer compartment k10 upto 1000kvak) lifting lugs/ hooks for transformer.l) oil filling inlet pipe with plug.m) air release valve and drain out pipe with plug.n) conservator tank with level guage.o) silica gel breatherp) first oil fill up to recommended level by manufacturer with new oil as per is 335.q) cable terminal boxes with bushes on both ht and lt sides.r) hv winding: delta & lv winding: star.note: civil work for the construction of foundation including necessary earthwork etc is deemed to be included in quoted rates of the item., supply and fixing main lt panel cpri approved made out of crca sheet 3.15 mm thick outdoor pedestal type totally enclosed with front and rear opening, hinged doors with projected an raised platform of suitable size, weather and water proof with necessary locking arrangements along with lugs, cable glands of various sizes for cables, danger notice plate, strickering of switcher gear about termination of switch gear, and the nuts/ bolts etc used are to be made of rust proof material incl as per al bus bar rated with insulators suitable for three phase and four wire lt ac, 50 hz 415 v 2000 a capacity complete with powder coating, necessary internal electric connection as required and provision of the following : (main lt panel)., incoming:air circuit breaker 1600 amps, 50 ka, mdo type, 4 pole, micro processor release, with adjustable type overload protection, short circuit protection, with necessary cts, meters and cable boxes. - 1 no.outgoing:a) mccb 250 amps, 25 ka, 4 pole, suitable for capacitive loads, thermal magnetic release, with adjustable type overload protection, short circuit protection - 07 no (bldg vtpn 02 nos, bldg panels 04 nos + spare)b) mccb 140 amps, 25 ka, 4 pole, suitable for capacitive loads, thermal magnetic release, with adjustable type overload protection, short circuit protection - 01 no (dg amf panel)c) mccb 160 amps, 25 ka, 4 pole, suitable for capacitive loads, thermal magnetic release, with adjustable type overload protection, short circuit protection - 01 no (ff panel)d) mccb 100 amps, 25 ka, 4 pole, suitable for capacitive loads, thermal magnetic release, with adjustable type overload protection, short circuit protection - 01 no (apfc panel)e) intelligent panel meter to measure voltage, current, frequency, power factor, kwh etc with all connected cts.f) led indicating lamps with colour red, yellow, blue of 03 sets.note: civil work for the construction of foundation including necessary earthwork etc is deemed to be included in quoted rates of the item., supply & fixing of perforated gi cable tray of size 150 mm width x 50mm depth x 1.6mm thickness with perforations not more than 17.5% in convenient sections, joined with connectors, suspended from the ceiling with gi suspenders including bolts & n