Latest seamless steel Tenders | Government seamless steel Tenders

Central Government/Public Sector

CTN :45728297

20 Jul, 2026 NA

Surat - Gujarat

Tender For supply of industrial oxygen gas cylinder -indigenous empty high pressure seamless steel gas cylinder ,capacity 150cuft/47ltr.with is:7285(part2):2004,make- ecg, rama cylinders or similar as per attached specification on annexure-a [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45486208

13 Jul, 2026 8.50 Crore

Jabalpur - Madhya Pradesh

Tender For corrigendum : manufacture and supply of high pressure cold drawn seamless steel tubes for use in high pressure boilers at various tps of mppgcl.

CTN :45715785

20 Jul, 2026 NA

Bangalore - Karnataka

Tender For supply of sky blue 0 point 35 sq mm , c by a no 6 electrical cable copper multi conductor fibrous and pvc insulated hookup wire flexible yellow 0 point 35 sq mm , c by a no 6 electrical cable copper multi conductor fibrous and pvc insulated hookup wire flexible red 0 point 35 sq mm , c by a no 6 electrical cable copper multi conductor fibrous and pvc insulated wire white 0 point 35 sq mm , c by a no 6 electrical cable copper multi conductor fibrous and pvc insulated hookup wire flexible blue 0 point 35 sq mm , c by a no 6 electrical cable copper multi conductor fibrous and pvc insulated hookup wire flexible green 0 point 5 sq mm , c by a no 6 electrical cable copper multi conductor fibrous and pvc insulated hookup wire flexible yellow 0 point 5 sq mm , c by a no 6 electrical cable copper multi conductor fibrous and pvc insulated hookup wire flexible red 0 point 5 sq mm , c by a no 6 electrical cable copper multi conductor fibrous and pvc insulated hookup wire flexible sky blue 1 point 5 sq mm , copper ring terminal double splitter 2 sq mm x 6 point 5mm dia , copper tin braid 6 x 10 mm , copper tin braid 10 x 16 mm , copper tin braid 16 x 24 mm , copper tin braid 30 x 40 mm , insulating sleeve pvc white 32 mm dia , insulating sleeve pvc white 18 mm dia , insulating sleeve pvc white 16 mm dia , insulating sleeve pvc white 14 mm dia , insulating sleeve pvc white 12 mm dia , insulating sleeve pvc white 8 mm dia , insulating sleeve pvc white 6 mm dia , insulating sleeve pvc white 3 point 5 mm dia , insulating sleeve pvc white 3 mm dia , insulating sleeve pvc white 2 point 5 mm dia , insulating sleeve pvc white 2 mm dia , insulating sleeve pvc white 1 point 5 mm dia , cotton tape 20 mm width , surgical tape adhesive tape usp 20 mm width , insulation tape pvc black 18 mm width , nylon thread white 0 point 5 mm dia , locking wire steel 0 point 5 mm dia , atc binding wire 0 point 5 mm dia , atc binding wire 0 point 12 mm dia , potting compound ana bond 909 , solder soft 16 swg sn 63 percent pb 37 percent , solder flux , iso prophyl alcohal ipa , aluminium clad sheet 0 point 5mm thk 0 point 5 mm x 1200 x 100 mm is 737 , plastic cover 80 microns 18 inches x 24 inches , permanent marker pen black c/a no 6 aluminium alloy connector with olive drab chromate over cadmium plate with copper bush and protective cap ( copper inner outer bush, 45 pin female with straight split hood phenolic connector for screened clampsuit for 30x40 mm copper braid) sshr 60p 45esh3 jss:50860 as per sample, c/a no 6 aluminium alloy connector with olive drab chromate over cadmium plate with copper bush and protective cap( copper inner outer bush, 12 pin female with straight split hood phenolic connector for screened clamp for 16x24 copper braid) shr 32p 12esh1, jss:50860 as per sample, c/a no 6 aluminium alloy connector with olive drab chromate over cadmium plate wit4h copper bush and protective cap( copper inner outer bush, 15 pin female with right angle split hood phenolic connector for screened clamp) sshr 36u 15esh5, jss:50860 as per sample, c/a no 6 aluminium alloy connector with olive drab chromate over cadmium plate with copper bush and protective cap( copper inner outer bush, 4 pin female with right angle split hood phenolic connector for screened clamp) shr 20u 4esh8, jss:50860 as per sample, c/a no 6 aluminium alloy connector with olive drab chromate over cadmium plate with copper bush and protective cap( copper inner outer bush, 7 pin female with right angle hood phenolic connector for screened clamp) 2rm 18kue 7g1v1, jss:50860 as per sample, c/a //bid details 2 / 44

CTN :45727427

09 Jul, 2026 NA

Cuttack - Odisha

Tender For supply of refillable seamless steel gas cylinders (q3)

Central Government And Public Sector

CTN :45603679

06 Jul, 2026 NA

Surat - Gujarat

Tender For corrigendum : supply of refillable seamless steel gas cylinders (q3)

Central Government/Public Sector

CTN :45688683

16 Jul, 2026 63.29 Lacs

Ranga Reddy-T - Telangana

Tender For tender for supply of austenitic type-non magnetic stainless steel sheets conforming to hal std 1210 / 304 , qq-s-766 / 304 , astm a 240/ ams 5513 / 304 astm a666 / en 1.430 , en 10088-2 / bs 304 s 31 , bs 1449 part 2 / aisi304 size thickness 1.6 mm x 1000 mm x 2000 mm with pvc coating on both sides. , austenitic type (303) free machining non-magnetic bright quality stainless steel round , specification hal std 1206 / 303 , astm a 582 size dia 40 mm x 1 to 2 meters in length. , mild steel cold drawn round conforming to hal std 1001 , is 1570 part ii , grade c 20 / en 3 b , bs 970 / bs 070 m 20 , bs 970 size dia 45 mm x 1 to 2 meters in length. , spring steel wire is 4454 , part-1 , grade-3. dia 0.4mm , copper tube conforming to hal std 1311 , condition drawn , as per bs 2871 part 2 , c101 / is 2501 , etp tube size od 6 mm x 0.5 mm (id 5.0 mm) x 2 to 3 meters in length and ends should be covered with end caps. , al. rounds , con. to hal std 1257 or is 740-gr ric -1/2 hard(19000) or bs 1473-gr-ric-1/2h or enaw 573-3-1450 dia 3mmx2 to 3 mtr length , aluminium alloy sheets , hal std 1252-1/2h , size thickness 1.6mm x1000 x 2000mm , bs 1470-3103-h14 (ns-3)-1/2 h (h-4) , is 737-gr31000(ns 3) , half hard with pvc coating on both sides. , al.alloy sheet conf.to hal std 1252-3/4h , is 737-ns3 , l59 size thickness 1.63 mm x 1000 x 2000 mm.with pvc coated on bith sides. , alclad al.alloy plates , spec. 2014/2014 a-t6 /wp/t651 , cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad , is 736/al.clad 2014 , astm b209/ d.t.d 5040 a/hal std 1250 , th.thickness 10 mm , min. size 1000x1000mm , tolerances as per ansi h35.2/ hal std. 1250. , alclad al.alloy plates , spec. 2014/2014 a-t6 /wp/t651 , cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad , is 736/al.clad 2014 , astm b209/ d.t.d 5040 a/hal std 1250 th.thickness 12 mm , min. size 1000x1000mm , tolerances as per ansi h35.2/ hal std. 1250. , alclad al.alloy plates , spec. 2014/2014 a-t6 /wp/t651 , cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad , is 736/al.clad 2014 , astm b209/ d.t.d 5040 a/hal std 1250 , th.thickness 14 mm , min. size 1000x2000mm , tolerances as per ansi h35.2/ hal std. 1250. , alclad al.alloy plates , spec. 2014/2014 a-t6 /wp/t651 , cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad , is 736/al.clad 2014 , astm b209/ d.t.d 5040 a/hal std 1250 , th.thickness 20 mm , min. size 1000x1500mm , tolerances as per ansi h35.2/ hal std. 1250. , alclad al.alloy plates , spec. 2014/2014 a-t6 /wp/t651 , cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad , is 736/al.clad 2014 , astm b209/ d.t.d 5040 a/hal std 1250 th.thickness 22.5 mm , min. size 3 feet x 6 feet. , tolerances as per ansi h35.2/ hal std. 1250. , alclad al.alloy plates , spec. 2014/2014 a-t6 /wp/t651 , cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad , is 736/al.clad 2014 , astm b209/ d.t.d 5040 a/hal std 1250 , th.thickness 32.25 mm , min. size 1000x1000mm , tolerances as per ansi h35.2/ hal std. 1250. , alclad al.alloy plates , spec. 2014/2014 a-t6 /wp/t651 , cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad , is 736/al.clad 2014 , astm b209/ d.t.d 5040 a/hal std 1250 , th.thickness 25.4 mm , min. size 1000x2000mm , tolerances as per ansi h35.2/ hal std. 1250. , alclad al.alloy plates , spec. 2014/2014 a-t6 /wp/t651 , cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad , is 736/al.clad 2014 , astm b209/ d.t.d 5040 a/hal std 1250 , th.thickness 12.7 mm , min. size 1000x2000mm , tolerances as per ansi h35.2/ hal std. 1250. , alclad al.alloy plates , spec. 2014/2014 a-t6 /wp/t651 , cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad , is 736/al.clad 2014 , astm b209/ d.t.d 5040 a/hal std 1250 , th.thickness 16 mm , min. size 1000x1000mm , tolerances as per

CTN :45048307

31 Jul, 2026 NA

Tarapur - Maharashtra

Tender For corrigendum : : supply, installation, testing & commissioning of electrical equipment for dg block 119a of inrp - ht panels (119a)supply, installation, testing & commissioning of indoor type floor mounted, single front, metal clad, 1250 a, 6.6 kv, 3 phase, 3 wire, vcb switchgear panel suitable for a short circuit current of 31.5 ka for 3 seconds, internally arc tested for 31.5 ka for 1 second, comprising of following incoming & outgoing feeders : incoming feeder: 1 no. 1250 a, 3p vcb outgoing feeders: i) 7 nos. 630 a, 3p vcbii) 1 no. 1250 a, 3p vcb as tie feederwith surge arrestors, relays, pts, cts & other necessary accessories including associated structural steel required for complete installation of the panel & equipment earthing of the panel from both the earthing terminals of the panel to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & drawings. reference drg. nos: ip1/119a/05027339/dwg/001/r0 & ip1/119a/05027339/dwg/002/r0(note: terminal box of each incomer of 6.6kv switchboard shall be suitable for terminating 4x3cx400 sq.mm., 6.35/11kv (e), a2xwy cables.), supply of spares for ht panels as per attached spares list mentiond in section c, part ii of tender, 2.5 mva, 6.6/0.433 kv dry type transformers (119a)supply, installation, testing & commissioning of 6.6/0.433 kv, 2.5 mva, dyn11 dry type cast resin transformer having percentage impedance of 8.5% complete with ht cable end box, lt bus duct flange, off load tap changer on ht side with range of +/-5% in steps of 2.5%, wti scanner, ct for restricted earth fault protection and other necessary accessories including associated structural steel required for complete installation of the transformer & equipment & neutral earthing of the transformer from both the earthing terminals of the transformer to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & drawings.reference drg. no. : ip1/119a/05034347/dwg/001/r0, supply of spares for dry type transformers as per attached spares list mentiond in section c, part ii of tender, 2000 kva diesel generator sets (119a)supply, installation, testing & commissioning of 3 phase 2000 kva prime power 433v, 50hz, 0.8 p.f. diesel-generator sets with 110% overload capacity for 1 hr with four (4) stroke inline or vee type cylinder arrangement having engine speed 1500 rpm, 24v electric battery starting system with a provision of interchangeability of battery bank between two dg sets, complete with all auxiliary equipment including amf control panel, auxiliary mcc panels, heat exchanger cooling system, raw water pump, remote radiator with fans on terrace, ms exhaust piping, exhaust structure (maximum 30 m stack), 4 nos. of 3.6 cubic metre fuel day tank outside dg building (for all 4 dg sets) & 1 no. of 990 ltr intermittent tank inside each dg room, ms "c" class fuel piping between engine & fuel tank, dg room accoustic treatment & complete ventilation of dg room, brushless excitation for alternator, one no. 3200 amp 415 v 4p acb, ms structural steel supports/ channels/ angles & other necessary accessories including associated structural steel required for complete installation of the dg & equipment & neutral earthing of the dg from both the earthing terminals of the dg to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & necessary statutory clearances from cpcb etc. as required and as per tender technical specifications & drawings. design and construction of foundation for exhaust pipe rack/ structure of dg set is included in the scope of the contractor.reference drg. nos. : i) ip1/119a/05034347/dwg/001/r0ii) ip1/119a/05044831/dwg/003/r0iii) ip1/119a/05044831/dwg/004/r0iv) ip1/119a/05044831/dwg/005/r0v) ip1/119a/05044831/dwg/006/r0, supply of sp

CTN :45137445

27 Jun, 2026 21.45 Lacs

Siliguri - West Bengal

Tender For bid to ras tender for supply of z7 6640-008805 paper lens cleaning book of 100 sheets , w10 6675-000250 level surveying pocket abney , y3 6145-007489 cable power electrical flexible copper c , y3 6145-007493 cord power electrical flexble copper con , y3 6135-001363 lithium cell 3 5v dc size aa ls-6 ex , y3 5970-000575 insulation tape electrical cotton self a , y3 6135-000006 bty dry 1 5v no3 metal clad , y3 6135-000009 battery dry 1 5v no 6 , z7 5855-000717 dummy cell size aa with 33 ohms resis , v5 1240-000161 cover canvas 3a , n1 r72 1015-003940 cover for muzzle end 2a20-sb41-1 , m1 6920-000232 cleaning patch , z9 6140-005329 cell ni-cd 1 2v 700mah , y3 6145-007491 cable power electrical flexible copper c , w10 6675-000808 tape measuring steel 30 metrs , b3 1005-001474 lanyard pistol o g 35-inch double

CTN :45645945

25 Jun, 2026 NA

Kolkata - West Bengal

Tender For procurement and provisioning supply of hull outfitting items for multi-purpose vessel project, grse yard nos. 3059 - 3062 - base plate for stanchion type-i & ii, 80x40x3.2 rec hollow sctn astm-a-501gr.b, 80x40x3.2 rec hollow sctn astm-a-501grb, "50x50x6 mm ms angle 15:2062, gr b42.2x4.85 smless st pipe astm-a-106-b65nb carbon steel sleeve219.100x8.18tk smls st pipe astm a106g-bseamless pipe 32nbplug for bpwi type drain plugot manhole cover co600x400 (do type)22x22 square bar to gr. e2508050x50x6 mm ms angle is:2062, grb", flanges ms 150nb & stub end, gaskets, 50 nb striking plate m.s. (galv), bonb cs doubler penetration piece pn 10, 150nb cs doubler penetration piece pn 10, 250nbx150nb, steel reducer, 200 nb steel elbow, 90° (sr), 32nb carbon steel slip on flange pn 10, 200nb carbon steel sleeve, 32nb carbon steel sleeve, 200nb carbon steel sleeve, 32 nb gasket/'o'ring neoprene ruber, 15 nb sch. 40 galv seamless steel pipe, 15nb carbon steel sleeve, seamless pipe 168.3mm od x 8mm(150nb), seamless pipe ss 304, 80 nb, dn150 (160) pe100 pipe pn10, 150 nb steel elbow,90° (lr), 80 nb steel elbow 90° (lr) sch 80, 150nb ss316l slip on flange pn 06, bonb carbon steel slip on flange pn 10, loose pipe adapter flange brass wld ring, backing flange 32 o/d-spare-ro plant, dn150 (160) coupler pe100 pipe pn10, 250nex150nb, steel reducer, bonb cs doubler penetration piece pn 10, 50 nb striking plate m.s. (galv), seamless pipe ss 304, 80 nb, 42.2x4.85 smless st pipe astm-a-106-b, 00 nb steel elbow 90° (lr) sch 80, bonb carbon steel slip on flange pn 10, 25mm nb ms slip on flange (com. code-713, dn65 cs slip on flange pn 10 en1092-1, bonb carbon steel sleeve, bonb carbon steel sleeve, obs 65nb gasket, obs 25nb gm pr. reducing v/v flng gasket, 65x65x8 mm ms angle is:2062, gr 'a", *50x50x6 mm ms angle 15:2062, gr, 22x22 square bar to gr. e25080, plug for bpwi type drain plug, 22x22 square bar to gr. e25000, 19mm dia round bar to gr. e25080, flush lashing pots cargo lashing swl-25t, "50x50x6 mm ms angle is:2062, gr b42.2x4.85 smless st pipe astm-a-106-865nb carbon steel sleeveseamless pipe 32nb32nb carbon steel slip on flange pn 1032nb carbon steel sleeve32 nb gasket/o'ring neoprene ruber15 nb sch. 40 galv seamless steel pipe15 nb steel elbow, 90° (lr)15nb carbon steel sleeveseamless pipe 168.3mm od x 8mm(150nb)seamless pipe ss 304, 80 nbdn150 (160) pe100 pipe pn10150 nb forged socket end 90 deg elbow150 nb steel elbow,90° (lr)80 nb steel elbow 90° (lr) sch 80150nb ss316l slip on flange pn 0680nb carbon steel slip on flange pn 10loose pipe adapter flange brass wld ringbacking flange 32 o/d-spare-ro plantdn150 (160) coupler pe100 pipe pn10150 nb pipe support clip(com.code-793264150 nb pipe support clip(com.code-79326432 nb gasket/'o' ring neoprene ruber15 nb sch. 40 galv seamless steel pipe15 nb steel elbow,90 (lr)", 15nb carbon steel sleeve, seamless pipe 168.3mm od x 8mm(150nb), seamless pipe ss 304, 80 nb, dn150 (160) pe100 pipe pn10, 150 nb forged socket end 90 deg elbow, 150 nb steel elbow 90° (lr), 80 nb steel elbow 90° (lr) sch 80, 150nb ss316l slip on flange pn 06, bonb carbon steel slip on flange pn 10, loose pipe adapter flange brass wld ring, backing flange 32 o/d-spare-ro plant, dn150 (160) coupler pe100 pipe pn10, 250nex150nb, steel reducer, 150nb cs doubler penetration piece pn 10, bonb cs doubler penetration piece pn 10, 50 nb striking plate m.s. (galv), flanges ms 150nb & stub end, gaskets, 125 nb seamless black pipe, 7300x5.2thk smls st pipe astm-a106g-b, 7300x5.2thk smls st pipe astm-a106g-b, 250nex150nb, steel reducer, 65 nb steel elbow 90° (lr), 65 nb steel elbow 90° (lr), 125 mb steel elbow, 90° (sr), 125 mm nb ms slip on flange (com. code, dn65 cs slip on flange pn 10 en1092-1, 125nb carbon steel sleeve, 65nb carbon steel sleeve, 50 nb striking plate m.s. (galv), obs 65nb gasket, 60.300x3.9thk smls st pipe astm-a106g-b, 250nbx150nb, steel reducer, 50 nb steel elbow 90° (lr) sch 80, sonb carbon steel slip on flange

CTN :45646820

29 Jun, 2026 NA

Kanchipuram - Tamil Nadu

Tender For corrigendum : annual tender for 2026-27 street light material supply in achirapakkam town panchayat - 40 watts fl tube light, 40wattsvpitcopperchoke, 40watts starter, side holder, street light aluminium fittingwithchokes,bulb& starter, 1*40 street light accessories, 1*40 w street light fitting cover, 1*40w sideholderbase, 20 wled 4feet tube light fittings, 24 w led 4feet tube light fittings, 28 w led 4feet tube light fittings, 30 w led 4feet tube light fittings, 36 w led 4feet tube light fittings, 40 w led 4feet tube light fittings, insulationtaperoll, 7/16 pvc insulated copper wire, 7/20 pvc insulated copper wire, 3/20 pvc insulated copper wire, 1/18 pvc insulated copper wire, 25 sqare mm 3 ½ “ ug cable, 50 sqare mm 3 ½ “ ug cable, hook up wire (patty wire), 2 core service wirw, 1/18 aluminum wire, 3/20 aluminium wire, 7/20 aluminium wire, 7/18 aluminium wire, 7/20 gi wire (service wire), 16 amps fuse unit, 32 amps fuse unit, 63 amps fuse unit, 100 amps fuse unit, 200 amps fuse unit, 500 amps fuse unit, "16amps dp switch with metal clad(fronthandle)", "32amps dp switch with metal clad(fronthandle)", "16amps dp switch with metal clad(sidehandle)", "32amps dp switch with metal clad(sidehandle)", "100amps tpn switch with hrc fusessheet steel double break", "125amps tpn switch with hrc fusessheet steel double break", "200amps tpn switch with hrc fusessheet steel double break", "315amps tpn switch with hrc fusessheet steel double break", "400amps tpn switch with hrc fusessheet steel double break", "16amps tpn metal clad swtich with re-wirable fuse units", "32amps tpn metal clad swtich with re-wirable fuse units", "63amps tpn metal clad swtich with re-wirable fuse units", "100amps tpn metal clad swtich with re-wirable fuse units", "200amps tpn metal clad swtich with re-wirable fuse units", procelain holder, peengan holder gls holder, "5000 w street light automatic on/offswitch iso:9000 – 1 set.", timer auto set, 1” pvc wiring pipe, 1”pvc wiring bend, 32mm service pipe set, 40w tl fitting street light clamp set, cable tag, e.b.rccpoleclampsetwithbolts&nuts1set, bi-metalicclamp3/20, bi –metalicclamp7/20, chokescrew, dbswitch, 25 ams bch contact set, eb service g.i box, g.i switch box (service box ), wooden plank for meter board, wooden plank for ariel board, 3/4” g.i bended pipe (suitable for led fitting), 1” g.i bended pipe for (suitable for led fitting), 1 ¼” g.i bended pipe (suitable for led fitting), 2.5 sq.mm 3 core copper flat cable, 4 sq.mm 3 core copper flat cable, 6 sq.mm 3 core copper flat cable, 10 sq.mm 3 core copper flat cable, 16 sq.mm 3 core copper flat cable, 20 w led street light fittings, 25 w led street light fittings, 30 w led street light fittings, 40 w led street light fittings, 45 w led street light fittings, 48w led street light fittings, 60 w led street light fittings, 70 w led street light fittings, 72 w led street light fittings, 80w led street light fittings, 120 w led street light fittings, 150 w led street light fittings, "70 w led street light fittings withdimmable driver", "72 w led street light fittings withdimmable driver", "90 w led street light fittings withdimmable driver", 120 w led street light fittings with dimmable driver, 150 w led street light fittings with dimmable driver, 100 w led flood light with dimmable driver, 120 w led flood light with dimmable driver, 150 w led flood light with dimm11864able driver, 200 w led flood light with dimmable driver, 100w led flood light with integrated driver, 120w led flood light with integrated driver, 150w led flood light with integrated driver, 100w led high bay lights fitting, 150w led high bay lights fitting, 200w led high bay lights fitting, "120w : 6500k : led ip65 : solar streetlight fitting", "40w : 12.8v : ip65 havells street lightfitting", "40w : 6500k , 10000mah : 10w panel :ip66 sensor type", "60w : 6500k , 15000mah : 15w panel :ip66 sensor type", "100w : 6500k , 20000mah : 18w panel :ip66 sensor type", 25 w led driver, 25 w mcpo cp w

Seamless Steel Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government And Public Sector

Central Government/Public Sector