Get complete information related to latest Searchlight Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Searchlight Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Searchlight Tenders.
Tender For regular operation and maintenance of street lights (with material) at all industrial areas under riico ranpur kota(for 2 years) - regular operation and maintenance of high mast light in ranpur , kota including supply and replacing the required material and labour etc. complete as per the following terms and conditions:- i at any moment a minimum of 90% of total fixture must be in order. the defective fixture must be repaired within 3 days, falling which deduction for number of light which are not functioning in the industrial area shall be made at one time of the rate (accordingly deduction for lights which are not functioning becomes two times of the rates from total payment due for total number of lights whose operation and maintenance was awarded to the contractor ). ii contractor shall arrange at his cost for put on & off the street light fixture at appropriate time regularly as per instructions of engineer-in charge. a register shall be maintained at riico/association office and complaint lodged must be attended by contractor within 24 hours. the person deputed by contractor shall attend the riico/association office daily and comply the instructions and attend complaints regularly. iii contractor will have to employ trained and qualified electricians for the work. iv corporation shall not be responsible for any kind of accident during execution of work. v contractor will be responsible for safety and security of fixtures and all concerned materials. vi contractor will be responsible for arrangement of all t&p required for the work vii cost of all labour and material like lamp / balllast wire etc. will be born by contractor. all material required for the work shall not be below the category-ii of concerned bsr item. contractor has to repair and maintenance of fixture with material in all cases like short circuit, phase to phase of jvvnl line etc. viii no extra payment will be made for fixing/removal of extra/existing fixture in the industrial area. ix contractor will be responsible for timely collection and deposition of electric bills of areas in each month. in case of delay in payment and jvvnl impose surcharge for delay payment the same will be recovered from the running bill fo the contractor. payment of electricity bill will be made by riico. x contractor will be responsible for rebate of timer provided by jvvnl. hence contractor will maintain the on/off system by timer properly. in case no rebate is provided by jvvnl due to failure of timer then rebate will be deducted from contractor payment. xi contractor will be responsible for any theft of electricity through poles and he will make necessary arrangements for this. in case of any theft is found suitable penalty will be imposed on the contractor. xii contractor will maintain cubical panel board and assessories fitted in it. in case of any fault repair/replace of material will be done by the contractor at his own cost. no extra payment will be made on behalf of material. xiii contractor has to keep ready total fixtures. in case of fault of fixture a penalty of rs.100/- per fixture per day will be imposed on the contractor., regular operation and maintenance of street light fixtures hpsv/ hpmv (70w/150w) in ranpur, kota including supply and replacing the required material and labour etc. complete as per the following terms and conditions:- i at any moment a minimum of 90% of total fixture must be in order. the defective fixture must be repaired within 3 days, falling which deduction for number of light which are not functioning in the industrial area shall be made at one time of the rate (accordingly deduction for lights which are not functioning becomes two times of the rates from total payment due for total number of lights whose operation and maintenance was awarded to the contractor ). ii contractor shall arrange at his cost for put on & off the street light fixture at appropriate time regularly as per instructions of engineer-in charge. a register sh
Tender For procurement of material and hiring of labour for day to day maintenance of various electrical installations in municipal parks and buildings in ward 140 inderpuri under kbz - supply of 1.5 sq. mm isi marked, frls pvc insulated,single core copper conductor cable as required., supply of 4.0 sq. mm isi marked, fr pvc insulated, single core copper conductor cable as required., supply of 63 amps., 2 pole isolator as required., supply of 6 a, to 32 a, ratings, dp mcb, "c" curve, 10 ka breaking capacity as required., supply of 6a to 32 a ratings, sp mcb, "c" curve, 10 ka breaking capacity as required., supply and fixing of 32mm dia x 1 meter long g.i. pipe (medium class) bracket for mounting of fluorescent/hpmv/hpsv street light fitting on pole including bending the pipe to the required shape , 2 nos 25mm x 6mm flat iron clamps with nuts, bolts and washer , painting the flat iron with primer and finish paint etc. as reqd., supply of xlpe insulated pvc sheathed al. conductor un-armoured cable 1.1kv grade conforming to is-7098 of following size:- 2x 6 sqmm, supply of xlpe insulated pvc sheathed al. conductor armoured cable 1.1kv grade conforming to is-7098 of following size:-2c*10 sqmm, supplying, lowering, testing and commissioning of vertical type, multistage, totally enclosed water filled deep well submersible pumping set complete i/c connection etc. as reqd. (c) three phase 5.0 hp having discharge of 300 lpm approx. at 39 m head., providing following labour for day to day maintenance of ward i/c required t&p etc. in one shift in a day on all working days (required maintenance material will be provided by department) as required as per terms & condition of the department (excluding parts) complete as required. 1. skilled labour", providing following labour for day to day maintenance of ward i/c required t&p etc. in one shift in a day on all working days (required maintenance material will be provided by department) as required as per terms & condition of the department (excluding parts) complete as required. 1. un-skilled labour", supply of led street light fixture, powder coated pressure die cast aluminium body (system lumen efficacy 120 135 lm/watt) of following body materials. - 45 watt
Tender For provision of new led street lights with allied accessories on existing poles at various dark spots in saidulajab ward no 160 under south zone - led street light fixture, powder coated pressure die cast aluminium body (system lumen efficacy >135 lm/watt). supplying, installation, testing & commissioning of street light led fixture, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with driver efficiency >85%, input voltage: 140-270 volt ac, frequency 50/60 hz, operating temp range -5 0c to 50 0c, internal surge protection of 5 kv l,n,e as per iec 61000-4-5, driver efficiency >85%,thd 10% as per iec 61000-3-2, p. f. 0.95, ip-66,ik-10, cri >70, under voltage and over voltage protection, emi-emc as per cispr-15, lenses for beam angle as per iesna type i/ii/iii as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (led,driver & electrical circuitary) of minimum 50000 burning hours with 70% of initial lumen maintained till life ends as per lm80 extrapolation ies tm-21-11 report, cct 3000 k / 4000 k / 5700 k /6500 k (as per ansi bin), sdcm(standard deviation color matching)5, maximum power consumption should not more than the specified rating and fixture shallbe of relevant bis standard complete in all respect i/c external connections with 1.5 sq mm frls/hffr, pvc insulated copper conductorsingle core cable and earthing etc. as required withminimum 5 year oem warranty. system lumen efficacy >135 lm/watt output . lm79 & lm80 testreport and all testing required for led fixturesas per bis shall be submitted.. shape size and cct shall be as approved by engineer-in-charge asper requirement. (thermal management: heat sink of aluminium housing such that led junction temperature shall not rise above 90 c). 45 watt , supply and fixing of 32mm dia x 1 meter long g.i. pipe (medium class) bracket for mounting of fluorescent/hpmv/hpsv street light fitting on pole including bending the pipe to the required shape , 2 nos 25mm x 6mm flat iron clamps with nuts, bolts and washer , painting the flat iron with primer and finish paint etc. as reqd, supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required. 3 x 1.5 sq. mm, supply of xlpe insulated pvc sheathed al. conductor un-armoured cable 1.1kv grade conforming to is-7098 of following size:-2c*4 sqmm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required. upto 35 sq. mm
Tender For provision of led light fittings with accessories at various locations in ward no. 167 khanpur, under south zone. - supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required. 3 x 1.5 sq. mm, supply and fixing of 32mm dia x 1 meter long g.i. pipe (medium class) bracket for mounting of fluorescent/hpmv/hpsv street light fitting on pole including bending the pipe to the required shape , 2 nos 25mm x 6mm flat iron clamps with nuts, bolts and washer , painting the flat iron with primer and finish paint etc. as reqd., supply of xlpe insulated pvc sheathed al. conductor un-armoured cable 1.1kv grade conforming to is-7098 of following size:-2c*4 sqmm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required. upto 35 sq. mm, led street light fixture, powder coated pressure die cast aluminum body (system lumen efficacy 135 lm/watt) supplying, installation, testing & commissioning of street light led fixture, powder coated pressure die cast aluminum body with built in or separate driver as per the requirement with driver efficiency >85%, input voltage: 140-270 volt ac, freq 50/60 hz, operating temp range -5 deg centigrade to 50 deg centigrade, internal surge protection of 5 kv l,n,e as per iec 61000-45, driver efficiency >85%,thd 10% as per iec 61000-3-2 , p. f. 0.95, ip66,ik-10, cri 70 , under voltage and over voltage protection,emi-emc as per cispr-15, lenses for beam angle as per iesna type i/ii/iii as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (led,driver & electrical circuitry) of minimum 50000 burning hours with 70% of initial lumen maintained till life ends as per lm80 extrapolation ies tm-21-11 report , cct 3000 k / 4000 k / 5700 k /6500 k (as per ansi bin) , sdcm(standard deviation color matching) 5, maximum power consumption should not more than the specified rating and fixture shall be of relevant bis standard complete in all respect i/c external connections with 1.5 sq mm frls/hffr, pvc insulated copper conductor single core cable and earthing etc. as required with minimum 5 year oem warranty. system lumen efficacy 135 lm/watt output . lm79 & lm80 test report and all testing required for led fixtures as per bis shall be submitted. shape size and cct shall be as approved by engineer-in-charge as per requirement. (thermal management: heat sink of aluminum housing such that led junction temperature shall not rise above 90 c). 45 watt
Tender For supply of hdpe life boat for rescue (8 seater) as per gsdrf specification (q3) , generatorlightingwithfireprotection , trolley , floatingrope , anchor , foldabletent , searchlight
Tender For supply of financial year 2026-27 main electrical overall action work purpose rate tender invitation work - vidyut samagri krya karya vittiya varsha 2026-27, led fitting (fixture) with 90w light efficacy=110lm/w color temprature 6000k-7000k, burning life 50000 hrs. power factor = 0.95, surge protection ip 66, cri=70, protection= 4kv, lm79, lm80 & nabl certificate, led fitting (fixture) with 60w light efficacy=110lm/w color temprature 6000k-7000k, burning life 50000 hrs. power factor = 0.95, surge protection ip 66, cri=70, protection= 4kv, lm79, lm80 & nabl certificate, led fitting (fixture) with 45w light efficacy=110lm/w color temprature 6000k-7000k, burning life 50000 hrs. power factor = 0.95, surge protection ip 66, cri=70, protection= 4kv, lm79, lm80 & nabl certificate, 90w led driver and 90w led plate set, 60w led driver and 60w led plate set, 45w led driver and 45w led plate set, copper wire 2.50 sqmm roll 90 m, copper wire 4.00 sqmm roll 90 m, copper wire 1.00 sqmm roll 90 m, copper wire 1.5 sqmm roll 90 m, 6mm aluminum wire roll 90 m, 1.5mm aluminum wire roll 90 m, 2.5mm aluminum wire roll 90 m, 2.00mm aluminum wire roll 90 m, 2-core cable wire, 12mm, led bulb 60 watt, led bulb 50 watt, led bulb 45 watt, led bulb 30 watt, led bulb 18 watt, led bulb 15 watt, led bulb 12 watt, led bulb 10 watt, led bulb 09 watt, led bulb 60 watt, clamp (1.25") with pipe strap, nut bolt 6" 4thread, pendant holder, ceiling fan 48 inch, 12" wall fan, 12" exhaust fan, main switch 200 amp, mcb 63 amp, mcb 32 amp, mcb 25 amp, mcb 16 amp, 18" fiber cooler fan, plier 6 inch, screwdriver 12" / 6" (two-in-one), safety shoes for electrical workers, tool bag, electronic call bell, bed switch, vertical cooler pump, raw rubber in rolls, gloves 11,000 volts, button 6 amp (c series), socket,6 amp, holder,6 amp, insulation tape 32amp, insulation tape 63amp, extension board (operate at 6 amps and handle 1000w to 1500w), torch (searchlight) 125 watt 10000 lumens with reacharable battery, tiranga strip light (120 leds per meter, cove lighting compatible, indoor/outdoor use, waterproof ip67 18 meter length roll), led tube light 30 watt, 3 core cable (4mm), led flood ligh 30 watt, led flood ligh 40 watt, led flood ligh 50 watt, room heater 2000 watt, chain saw cutter electric 22 inch 2800 watt 50l x 27w x 27h centimeters, exhaust fan 24 inch
Tender For auction sale of diamonds like stones items & other items, click here for detailed sale list,chain bracelet 6" long items & other items, click here for detailed sale list,agate stones assorted items & other items, click here for detailed sale list,neckles set- 13 pcs ear items & other items, click here for detailed sale list,chain gold 10" long items & other items, click here for detailed sale list,quartz grit samples items & other items, click here for detailed sale list,wooden box empty items & other items, click here for detailed sale list,books: design pattern items & other items, click here for detailed sale list,medical book: oral items & other items, click here for detailed sale list,book -1 no; items & other items, click here for detailed sale list,ladies saree fab items & other items, click here for detailed sale list,jute rug 12'x8' 1 no items & other items, click here for detailed sale list,machine made carpet items & other items, click here for detailed sale list,jute rug size 12' x 6' items & other items, click here for detailed sale list,indian hand tufted items & other items, click here for detailed sale list,jute rug 5' dia 1 no items & other items, click here for detailed sale list,(a) yoga mat 6'x 2' items & other items, click here for detailed sale list,pm cataloque art items & other items, click here for detailed sale list,jute rug- 2 no. (3x3) items & other items, click here for detailed sale list,jute rug items & other items, click here for detailed sale list,walking items & other items, click here for detailed sale list,horn mug items & other items, click here for detailed sale list,empty card board folded items & other items, click here for detailed sale list,zipper - 1010 pcs items & other items, click here for detailed sale list,thermal printer 3 width items & other items, click here for detailed sale list,carbon black powder items & other items, click here for detailed sale list,bathing keya soap items & other items, click here for detailed sale list,empty pet bottle items & other items, click here for detailed sale list,tounge cleaner items & other items, click here for detailed sale list,pull up roller banner items & other items, click here for detailed sale list,searchlight with items & other items, click here for detailed sale list,armour shoulder 1 pair items & other items, click here for detailed sale list,scuba sca divers items & other items, click here for detailed sale list,hand glove make 3m items & other items, click here for detailed sale list,gasket 3 m for left items & other items, click here for detailed sale list,foam for cushion in 2 items & other items, click here for detailed sale list,horse saddlery draw rein items & other items, click here for detailed sale list,horse saddle with rope items & other items, click here for detailed sale list,saddle pad only -1 no. items & other items, click here for detailed sale list,horse show pad-1no. items & other items, click here for detailed sale list,cloth bags items & other items, click here for detailed sale list,cotton potli bag moti items & other items, click here for detailed sale list,advertisement woven items & other items, click here for detailed sale list,leather sheet roll items & other items, click here for detailed sale list,lot 1 of 4 -paper bag items & other items, click here for detailed sale list,wooden box -1 no. items & other items, click here for detailed sale list,sticker paper 200 nos items & other items, click here for detailed sale list,party wear blazzer items & other items, click here for detailed sale list,power supply- 1 no. items & other items, click here for detailed sale list,rmg: assorted items & other items, click here for detailed sale list,rmg: groom marriage items & other items, click here for detailed sale
Tender For corrigendum : supply of lamp led 36w 2x2 led 1700004151 , led tube fitting 4 feet 1700010041 , hand held searchlight 1700010264 , integral bollard in reinforced 1700002302 , led 250w flood light fitting rect sq 1700009196 , surface mounted led luminaire round 1700010040 , led 15 20w round type indoor luminaire 1700004186 , led 150w high bay fitting rect sq model 1700009192 , 60w led well glass fitting with diffuser 1600041069 , lamp led 250 280w 120 270v 1700004148 , junction box 300x200x150mm 1600021442 , led 30w flood light fitting rect sq mdl 1700009193 , led batten 20 watt inverter type 1700268417
Tender For painting, lighting, barricading, temporary electrification, etc. - non-waterproof pandal (including ceiling), waterproof pandal (including ceiling), waterproof canopy, decorative fabric enclosure, decorative side draping, plastic tarpaulin, chowki (platform), kites, camp cots, cooler (fiber), ghost/spooky prop (including mechanism) [x3], generator (15 kva) — including fuel and operator, generator (15 kva) — excluding fuel, with operator, generator (20 kva) — including fuel and operator, generator (20 kva) — excluding fuel, with operator, generator (10 kva) — including fuel and operator, generator (10 kva) — excluding fuel, with operator, halogen light (300 watt), wiring cables, cfl bulb (20 watt), bamboo pole (approx. 10 ft. height), mic set (includes microphone, sound mixer, speakers, and operator), metal barricades, carpet (nylon), carpet (velvet), mosquito net, steel glass, steel jug, drum, bucket, construction of barricades, wire enclosure (boundary fencing), four-legged gate, p.a. system (with two loudspeakers and battery), rolex watch, computer set (including operator) for issuing passes to visitors at gotidhari and amarkha, counter/booth for issuing passes to visitors at gowari and amarkha, umbrella/canopy (round) – seating capacity for 5-6 persons, led street light (30 watt), led street light (40 watt), led street light (50 watt), high-power sound system, battery-inverter set, construction of a swiss cottage (tent/stage) with complete decoration, inaugural lamp (with candles, camphor, and matchbox), searchlight (120 w), searchlight (200 w), sanitation worker, waterproof tent (with seating arrangement for visitors; height: 15 feet) – complete structure. identity card (size: 14 cm x 8 cm; with ripple finish and plastic lamination), document printing on 200 gsm paper (10 cm x 6 cm; color), production rate for thematic stage backdrop (cultural), cut-out production rate, a4 size plain pamphlet printing, a4 size color pamphlet printing, a5 size plain pamphlet printing, a5 size color pamphlet printing, color poster printing, invitation card printing, printing of a 'glimpse' booklet related to the shravani mela (including color cover pages)