Latest seat assembly Tenders | Government seat assembly Tenders

Central Government/Public Sector

CTN :43532159

13 Jan, 2026 NA

Multi City - Multi State

Tender For supply of economy class single seat assembly with upholstery fabric for vande bharat rack no. 16. mv mobility limited part no. mvml _vb_ec_1015 only. [ warranty period: 30 months after the date of delivery ]

CTN :43334968

14 Jan, 2026 NA

Trivandrum - Kerala

Tender For corrigendum : supply and installation of plumbing items for the construction of isolation wards in kerala -zone 2. - plumbing items, providing and fixing white vitreous china coupled type water closet (european type w.c. pan) with seat and lid, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: w.c. pan with isi marked white solid plastic seat and lid, providing and fixing pedestal type wash basin with c.i. brackets, 15 mm c.p. brass pillar taps, 32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: white vitreous china pedestal type wash basin with a 15 mm c.p. brass pillar tap, providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with c.p. brass screws and washers complete., supplying and fixing stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site engineer-in-charge., supplying and fixing cp towel rod 45cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site engineer-in-charge., supplying and fixing cp health faucet superior quality ( jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site engineer-in-charge., supply,fixing, testing and commissioning angle valves make: kohler or equivalent, supply,fixing, testing and commissioning at site c.p. brass bib cocks long noze with wall flange make: kohler or equivalent, providing, fixing, testing and commissioning at site in position floor trap, with stainless steel grating, providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes& fittings, with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer-in-charge. concealed work, including cutting chases and making good the wall etc. 15 mm nominal outer dia pipes, providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes& fittings, with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer-in-charge. concealed work, including cutting chases and making good the wall etc. 20 mm nominal outer dia pipes, providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes& fittings, with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer-in-charge. concealed work, including cutting chases and making good the wall etc. 25 mm nominal outer dia pipes, providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes& fittings, with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer-i

CTN :43334983

14 Jan, 2026 NA

Trivandrum - Kerala

Tender For corrigendum : supply and installation of plumbing items for the construction of isolation wards in kerala -zone 1 - plumbing items, providing and fixing white vitreous china coupled type water closet (european type w.c. pan) with seat and lid, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: w.c. pan with isi marked white solid plastic seat and lid, providing and fixing pedestal type wash basin with c.i. brackets, 15 mm c.p. brass pillar taps, 32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: white vitreous china pedestal type wash basin with a 15 mm c.p. brass pillar tap, providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with c.p. brass screws and washers complete., supplying and fixing stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site engineer-in-charge., supplying and fixing cp towel rod 45cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site engineer-in-charge., supplying and fixing cp health faucet superior quality ( jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site engineer-in-charge., supply,fixing, testing and commissioning angle valves make: kohler or equivalent, supply,fixing, testing and commissioning at site c.p. brass bib cocks long noze with wall flange make: kohler or equivalent, providing, fixing, testing and commissioning at site in position floor trap, with stainless steel grating, providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes& fittings, with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer-in-charge. concealed work, including cutting chases and making good the wall etc. 15 mm nominal outer dia pipes, providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes& fittings, with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer-in-charge. concealed work, including cutting chases and making good the wall etc. 20 mm nominal outer dia pipes, providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes& fittings, with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer-in-charge. concealed work, including cutting chases and making good the wall etc. 25 mm nominal outer dia pipes, providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes& fittings, with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer-in

CTN :43474993

27 Jan, 2026 NA

Palampur - Himachal Pradesh

Tender For providing and laying wooden bed (size 6 x 3' x 18" to 22") front 9" x 12" extra height) back 6" x 8" extra, plywood = 12 mm sheet (safeda wood work etc.) including entire carriage of material within all leads & lifts. ,providing and laying wooden study table (size l-3' xw-2'x h-21/2") plyboard 12mm to 18mm sheet, drawer unit side & cushioned seat including entire carringe of material within all leads & lifts. ,providing and laying wooden study chair standared size (cushioned seat and leg sofa wood etc.) including entire carriage of material within all leads & lifts. ,providing and laying steel almirah (22 gauge) size (h-1280xw-760xd-435mm) including entire carriage of material within all leads & lifts. ,providing and laying curtain window-cloths wire (size w=4', h=5) including entire carriage of material within all leads & lifts.

Central Government/Public Sector

CTN :43478166

28 Jan, 2026 NA

Jhansi - Uttar Pradesh

Tender For supply of driver seat assembly with reclining, sliding and height adjustment mechanism, as per drg. no. 11811717 alt. %u2018z%u2019 spec :hhp/veh/001, specification for cleaning, marking and packing misc.444

Central Government And Public Sector

CTN :43458957

27 Jan, 2026 1.98 Crore

Rawatbhata - Rajasthan

Tender For supply , storage, handling, erection, installation, commissioning and testing of electrical equipment like power and control cable ,cable trays and supports lighting system and earthing system at rr site in oesc system. - supply and installation of following pre-fabricated and galvanized cable tray supporting structure materials as per specification, tender drawing (raps-1to8/ 01652/2053/ga) and reference drawings nos. kapp-3&4/ 21490/ 2002, 2003 & 2004/dd., 22 (22 mm dia) first rod with m22x55 long threading on one end & m 22 hex nut, isa 65x65x6, 22 (22 mm dia) rod, isa 65x65x8, ismc 75 channels, couplers (36 odx6 thk.), weld attachment (made of 75x10 thk. plate,320 long), swivel washer seat (46 x16 thk.), swivel washer (40 x16 thk.), iso 1234, 3.5x32 spilit pin, shear bolt m10x70 with hex. head & nut & washer, iso 1234, 3.5x20 split pin, washer (48 , is 2016), 3 mm thick l clamp with m8x30 mm long bolt, 2 plain washer, 1 spring washer and nut, 600mm long, 30 mm wide & 2.5 mm hot dip galvanized strip with two nos. of m8x30 mm long bolt, 4 plain washer, 2 spring washer and 2 nuts, supply and installation of following sizes of 1100v rated, cu conductor, xlpe insulated, frls pvc (st2) inner and outer sheathed un-armoured power cables along with wooden cable drums, 3cx2.5 sq.mm, 4cx2.5 sq.mm, 2cx2.5 sq.mm, supply and installation of following medium duty gi pipes/ heavy duty erw rigid conduits for routing cables from cable trays to distribution boards or to various field equipment or between equipment as directed by engineer- in- charge., 100 mm dia pipe, 65 mm dia pipe, 40 mm dia pipe, 25 mm dia conduit, supply and termination / connection of following types and sizes of 415v power cables at both ends along with cable glands, lugs, ferrules, clamps, hardware etc., and drilling of gland plates, crimping of lugs for termination of following cables (source end & load end considered separately)., supply of 3.5cx300, al, unarmoured, supply of 3.5cx185, al, unarmoured, supply of 4cx16, cu, unarmoured, supply of 3cx6, cu, unarmoured, supply of 4cx2.5, cu, unarmoured, supply of 3cx2.5, cu, unarmoured, supply of 2cx2.5, cu, unarmoured, termination / connection of 3.5cx300, al, unarmoured, termination / connection of 3.5cx185, al, unarmoured, termination / connection of 4cx16, cu, unarmoured, termination / connection of 3cx6, cu, unarmoured, termination / connection of 4cx2.5, cu, unarmoured, termination / connection of 3cx2.5, cu, unarmoured, termination / connection of 2cx2.5, cu, unarmoured, supply and termination of lugs for the following power cables (suitable bi-metallic connector shall be provided for termination of aluminium cable on copper bus bar) (neutral core lug shall be of suitable size)., lugs for 3.5cx300, al, unarmoured, lugs for 3.5cx185, al, unarmoured, lugs for 4cx16, cu, unarmoured, lugs for 3cx6, cu, unarmoured, lugs for 4cx2.5, cu, unarmoured, lugs for 3cx2.5, cu, unarmoured, lugs for 2cx2.5, cu, unarmoured, supply and installation of mortar based fire stops and fire break for all floor & wall openings of cable trays and in the run of cable trays and for sealing of electrical conduits including supply of structural steel support material if required., supply of 3 hr. rated fire stop for cable penetration in floor/walls + fire stop for cable/wire conduits & pipe sleeves, supply of 30 minute rated fire retardant compound (fire break) over cable, installation of 3 hr. rated fire stop for cable penetration in floor/walls + fire stop for cable/wire conduits & pipe sleeves, installation of 30 minute rated fire retardant compound (fire break) over cable, supply and installation of following sizes of gi conduits including supply & installation of all accessories like bends, elbows, couplers, hospital saddles, spacers, gi junction boxes, gi pull boxes, etc., and other accessories required to complete the job on wall/ column/ ceiling etc. as per specification and drawings. (the run

State Government

CTN :43425247

21 Jan, 2026 25.00 Lacs

Bikaner - Rajasthan

Tender For nib for procurement of library furniture at mgsu - nib for procurement of library furnitures at mgsu, books racks(main unit)size 7 6 hx3 wx22 d steel double-faced stacks one main unit 20gaze having 14 shelves total(each face 7 shelves)sides, pillar shelves, and side rest made out of 20 gauge m.s. sheet. shoes of the stacks are made out of 16 gauge m.s. sheet. the main unit is provided with a range indicator and label holder. with powder coating color which we want., books racks(add on unit)size 7 6 hx3 wx22 d having 14 shelves total (each face 7 shelves) sides, pillar shelves, and side rest made out of 20 gauge m.s. sheet. shoes of the stacks are made out of 16 gauge m.s. sheet. with powder coating color which we want, exhibition standsize 63 x20 frame,30 x5 pocket 4 on each side, with 2 slanting shelves for display of boards. powder coated. o, exhibition standpowder coated, 20 pocket in all, 10 pockets 12" long and 10 pockets 18" long for display of approx. 50 books. total stand 68" hight., simple newspaper almirasize 15"x36"x98"angle guage 18shelf guage - 22, library student chairsseating height 18"seat size 18"x18"both sides cloth cover with comfortable, visitors chairsstillness stell with five sitters (1.75-1.80 meters in length, 68-79 cm in width and 77.79 cm in height. for instance one moder is 1750mm long. 680mm wide and 780 mm high. while another is 177.8 cm long 66cm wide and 78.7 cm high), student scholar carrels 32"x30"x24" wxhxdupper height 1.5", aluminium alloy frame, alluminium frame+psnrl/glass/fabric/steel board, h shape and including computer keyboard, four glass book case66 x 33 x 12, with 4 lock system with 20/22 gaze, wooden periodical display rakes with 25-compartmentsize 75" hx57" wx16"d wooden with 25 compartments, book supporterpowder coated iron, size- 7"x5", weight 300 gram

Central Government/Public Sector

CTN :43462285

29 Jan, 2026 2.3 Thousand

Ernakulam - Kerala

Tender For supply of house hold items for the use of utl camp office - refrigerator -250l-lg/samsung/whirlpool/haier/godrej/electrolux/bosch, led tv-43 inch - sony kd-50 x75k or equivalent -lg/samsung/panasonic, washing machine 6 kg capacity semi automatic-samsung/lg/ whirlpool/godrej/haier/ifb, gas stove - 3 burner - toughened glass top prestige/butterfly/bajaj/pigeon/glen/faber, air conditioner 5 star voltas/bluestar/daikin/carrier/lloyd -1 ton - inverter type with stabilizer (v-guard/vigil/microtek/voltas) and mounting stand (supply at cochin port authority, willindon island), installation charge for 1 ton - inverter type air conditioner (installation to be done at kavarathi island, lakshadweep), air conditioner 5 star voltas/bluestar/daikin/carrier/lloyd-1.5 ton - inverter type with stabilizer (v-guard/ vigil/microtec/voltas) and mounting stand (supply at cochin port authority, willindon island), installation charge for 1.5 ton - inverter type air conditioner (installation to be done at kavarathi island, lakshadweep), microwave oven-20 l-lg/whirlpool/samsung/ifb/godrej/haier/panasonic, mixie-4 jar-philips/crompton/butterfly/preethi/sujatha/prestige/bosch, wall mounted water purifier uv + ro-aquaguard/kent or equivalent quality, sports geared cycle - good quality, pressure cooker -3l-hawkins/prestige, pressure cooker -4 l-hawkins / prestige, 6 plates, 6 quarter plates, 6 cups & saucers of melmoware or good quality, plastic chairs - nilkamal/cello/supreme/maharaja or equivalent quality, bucket-plastic capacity 20ltr - good quality, milk boiler -ss-nolta or equivalent, choodarappetty - (rice cooking pot) sreeram - or equivalent -2 kg, kadai - large size - nolta or equivalent quality, vessel (serving purpose) - nolta or equivalent quality, spoon different sizes - good quality, knife all sizes 6 nos- good quality, wooden chopping board - good quality, vegetable peeler (ss)- good quality, storage bins (grocery/masala) 10 pieces - good quality, water storage container - steel - 25 l capacity - good quality, apron cloth good quality, chappati making baton and marble stone - good quality, coffee mug - good quality, tray (metal) good quality, salt and pepper dispenser (ss)- good quality, tawa prestige or equivalent quality, tongs (metal)- good quality, lemon squeezer (ss)- good quality, coffe-strainer (ss) - good quality, stainer-ss-16 cm - good quality, vegetable basket - good quality, wall clock-titan/ajantha or equivalent, 3+2 seater sofa-standard size mahagony or equivalent quality wood, teapoy - standard size 90x 45x45 - mahagony or equivalent quality wood, dining table 6 seater with chairs - mahagony or equivalent quality wood, single bed cots-4 feet-standard size - mahagony or equivalent quality wood., -steel almirah godrej interio or equivalent quality - size - 90 x120 x 31.7, godrej or equivalent quality study table 120 x75x60, revolving chair-high back-adjustable with cushion seat - good quality, cloth drying stand-steel good quality, ortho mattresses - single - 5 inch thickness - good quality, pillow good quality, pillow cover - good quality, window curtain 144"/64" (3 pieces set) - good quality, door curtain - 96"/84" (2 pieces set) - good quality, bed sheet (cotton) - single - 70"/105" - good quality, blankets (cotton) - good quality

corporations/Associations/Others

CTN :43464469

21 Jan, 2026 NA

Vengurla - Maharashtra

Tender For supply of providing and fixing surf board , providing and fixing tripal twister , providing and fixing solar strret light , supplying 120 inch projector screen with tripod stand , providing arrangemn to fmldback , providing and fixing single seat hdpe sit up board , executives table , supplying and instalation of v belt , supplying corrostion resistant walker , providing rubber yoga mats , supplying hard wood with good resistancew carrom board , suppling walking sticks with adjustable height , providing and fixing c.i garden bench , full height steel storage , providing amplifier with built in mixer , supplying and installing motorised treadmill , providing and installing fowler bed with matress , iteam no 18 providing moulded plastic cafeteria chair with armset , providing wooden magnetic folding chess board , providing patient care bed with matress , supplying and installing standared throw , providing and fixing double leg press , supplying and installing 10kva inverteor , providing handheld microphone with cable , providing and fixing pvc coated synthetic material wrestling mat , supplying and installing 5kv movable genset , providing tarpaulin sheet , providing floor mounted mist air fan, body material fan

Central Government/Public Sector

CTN :43467096

19 Jan, 2026 NA

Lucknow - Uttar Pradesh

Tender For supply of folding type seat assembly of locomotive [folding type seat assembly of locomotive cab for sitting inspecting officer during foot plating/inspection. as per clw drg.no. 05/1/38/44,alt 9 for use in wap-7 & wag-9 locomotives.]

Seat Assembly Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

State Government

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector