Latest seat cushion Tenders | Government seat cushion Tenders

Central Government And Public Sector

CTN :40000343

02 May, 2025 35.00 Lacs

Bangalore - Karnataka

Tender For supply of interior furniture requirement for guest house at coffee research sub station crss, chettalli , kushal nagar taluk, kodagu district--, guest rooms 3 nos [1 to 3] , queen size bed of size [5' x 5.6'] ft: in solid african teak wood side support of 1.6" thickness x 5"inches hand head board 4ft and thickness 2.6" inches with teak veneer and foot board with 2 ft height & 2.5"inches & teak veneer with asian paints gold melamine polish. , wardrobe size [7' x 1.6'] ft: made up of approved isi brand of 19 mm thick ply wood [ green ply/ neem / gurgan or any other equivalent make] with teak venner of 4 mm thick, with shutter and asian paints gold melamine polish. , study table / tea coffee unit 4' x 2": made up of approved brand brand [ green ply/ neem / gurgan or any other equivalent make] of 19 mm thick ply wood with teak venner of 4 mm thick in ply, veneer & cane matching with entire room asian paints gold melamine polish. , revolving study chair in solid african teak wood, with foam seating 40 density & 32 density at the back of duroflex, rest well & peps premium fabric of jamevaar f&f & sarom , bed side table of size 14" hx2'w x16 d: in solid african teak wood for support, top and side, back & partly front cover with 19 mmm thick ply wood and teak veneer with asian paints gold melamine polish, , accent chair: in solid african teak wood, with foam seating 40 density & 32 density at the back of duroflex, restwell & peps premium fabric of jamevaar f&f & sarom , centre table of size 18" diameter:solid african teak wood for support and 19 mm ply wood with 4 mm thick teak veneer & asian paints gold melamine polish , ground floor f living room area , 3 seater upholstered: fully upholstered fabric sofa with african teak , wood at the base inside frame in neem wood foam seating 40 density & 32 density at the back of duroflex, restwell & peps premium fabric of jamevaar, d dcor, f & f & sarom , single seater upholstered: fully upholstered fabric sofa with african , teak wood at the base inside frame in neem wood foam seating 40 density & 32 density at the back of duroflex, restwell & peps premium fabric of jamevaar, d dcor, f & f & sarom , centre table of size [2.6' x 2.6'] ft solid african teak wood for support and 19 mm ply wood with 4 mm thick teak veneer & asian paints gold melamine polish , dinning area , dinning table of 6 seater of size [7' x3.6"x2.6'] with 6 chairs frame: in solid african teak wood, table top in ply & teak veneer chairs in solid african teak wood seating cushion 32 density of 2 premium fabric of jamevaar, d dcor, f & f & sarom , crockery unit / side board size 7' x 6'h x 18"width made up of 19 mm ply wood with 4 mm thick teak veneer & asian paints gold melamine polish , room no.4 , sleight king size bed of size [6' x 6.6'] ft in solid african teak wood side support 1.6" thickness x5" h and head board 4ft and thickness 2.6 "inches with teak veneer and foot board with 2 ft height & 2.5 inches thickness with asian paints gold melamine polish. , bed side table of size 16"dx18" w'w x20"h: in solid african teak , wood for support, top and side, back & partly front cover with 19 mmm thick ply wood and teak veneer with asian paints gold melamine polish , wardrobe size [7' x 1.6'] ft made up of approved isi brand of 19 mm thick ply wood [ green ply/ neem/gurgan or any other equivalent make] with teak venner of 4 mm thick, with shutter and asian paints gold melamine polish , study table unit 3" x 2": made up of approved brand brand [ green ply/neem/gurgan or any other equivalent make] of 19 mm thick, , ply wood with teak venner of 4 mm thick in ply, veneer & cane matching with entire room asian paints gold melamine polish. , patio area , wooden sofa seater [3 + 2 + 2] nos without cushions: in solid african teak wood made of all frame 1.6 deg * 1 thickness & arms made up of 4 width and 1.6" inches thic

corporations/Associations/Others

CTN :40003034

17 Apr, 2025 13.79 Lacs

Multi City - Andhra Pradesh

Tender For supply of gym equipment of chennupati ramakotaiah indoor stadium in 11th division. 1st call general funds - "providing and fixing of gym rubber mat flooring tiles of size of 500 x 500 mm and thickness of 15 mm,interlocking type of vulcanized virgin rubber of design and colour and with excellent impact bearing, tough on falling weights, protection to sub floor, sound absorbing & highly durable complete as per directions of engineer - in -charge. make - ecoflex, bioflex, fitflex or equivalent. including cost and conveyance of all materials and labour charges etc., complete as directed by the departmental authorities. ", "providing hack squat machinestructure and frames: structural frames are fabricated from 100 x 50 x 2.5mm thick square steel tubing. heavy metal bending design is used to ensure superior strength and to eliminate joint failure. weight stack: m.s weight stack; having 7.5 kg each plate weight fitted with 2 nylon bushes to avoid noiseless operations. guides: stainless steel guide rods of 25mm thick is used. bearings: lubricated high grade 'zz' steel ball bearing. selector pins: magnetic selector pins; made up of high quality steel 10mm with spring wire mechanism and nylon knob. cables: 6mm nylon air craft cables are used. pulley: pulleys made up of high quality nylon with deep grooved to support cable and double 'zz' bearing with m10 pin ensures superior strength and longevity.cushion / padding: seats cushion and pads are made up of 2"" high density foam and 18mm marine plywood is used for greater life and finally covered with heavy vinyl.hardware: hardware used are button head bolts and made up of high tensile steel.powder coating: all components are chemically treated to seal exterior and interior surfaces against corrosion. the components are electro statically powder coated at minimum 60-70-micron thickness to make it resistant to scratch, corrosion and humidity. closing caps: all open ends are covered with nylon/pp closing caps.handgrips: hand grips is used on handles wherever necessary made up of high quality rubber. foot pad: high quality rubber foot pad. digital repetition counter for each exercise/workout sets. including cost and conveyance of all materials and labour charges etc., complete as directed by the departmental authorities. ", providing multi adjustable bench structure and frames: structural frames are fabricated from 100 x 50 x 2.5mm thick square steel tubing. heavy metal bending design is used to ensure superior strength and to eliminate joint failure. selector pins: magnetic selector pins; made up of high quality steel 10mm with spring wire mechanism and nylon knob. cushion/padding:seats cushion and pads are made up of 2" high density foam and 18mm marine plywood is used for greater life and finally covered with heavy vinyl. hardware: hardware used are button head bolts and made up of high tensile steel. powder coating: all components are chemically treated to seal exterior and interior surfaces against corrosion. the components are electro statically powder coated at minimum 60-70-micron thickness to make it resistant to scratch, corrosion and humidity. closing caps: all open ends are covered with nylon/pp closing caps. foot pad: high quality rubber foot pad. including cost and conveyance of all materials and labour charges etc., complete as directed by the departmental authorities. , providing flat bench structure and frames: structural frames are fabricated from 100 x 50 x 2.5mm thick square steel tubing. heavy metal bending design is used to ensure superior strength and to eliminate joint failure cushion / padding: seats cushion and pads are made up of 2" high density foam and 18mm marine plywood is used for greater life and finally covered with heavy vinyl. hardware: hardware used are button head bolts and made up of high tensile steel. powder coating: all components are chemically treated to seal exterior and interior surfaces against corrosion. the components are electro statically

CTN :40007070

19 Apr, 2025 NA

Mumbai - Maharashtra

Tender For procurement of fcr materials for refuse vehicles of pantnagar garage under ex engr tr es deptt - retro reflective tape yellow 50 mm width, retro reflective tape white 50 mm width, retro reflective tape red 50 mm width, seat cushion 15" x 151/2" x 75 mm, back reset seat 15" x 151/2" x 50 mm

Central Government/Public Sector

CTN :39904830

21 Apr, 2025 NA

Chennai - Tamil Nadu

Tender For supply of single seat cushion assembly complete of vb train set economic s eat of m/s.tata steels limited to part number -vb/ts/08, conforming to spec: icf/md/spec- 367,rev -02, towards the rate contract requirement per year per coach as per the encl osed annexure. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :39933999

05 May, 2025 NA

Ajmer - Rajasthan

Tender For supply of complete set of seat cushioning material molded type pu foam as per mcf specification no. mmdts 19020 rev- 05 amendment -01 or latest / silicon foam for seat & berth as per rdso specification n o. rdso/2013/cg-13 (rev 1) and fire properties to en 45545 part-2 hl-3 or latest for lhb second ac cha ir car (lwsczac - 78 seaters) (one set consists of 78 no. seats and 78 nos. back) as per drg. skt-2023/33/ c r-1 & skt-2023/34/c r-1 [ warranty period: 120 months after the date of delivery ]

CTN :39853169

14 Apr, 2025 NA

Mumbai - Maharashtra

Tender For supply of base bottom foam (seat cushion foam)

Central Government/Public Sector

CTN :39848917

21 Apr, 2025 NA

Multi City - Multi State

Tender For supply of set of driver seat cushion for wag-9

Central Government/Public Sector

CTN :39787723

21 Apr, 2025 NA

Chennai - Tamil Nadu

Tender For supply of single seat cushion assembly complete of vb train set economic se at of m/s.perfect techno consultants pvt. limited to part number -511111,conforming to spec:icf/md/spec-367, rev -02, towards the rate contract requirement per year per coach as per the enclosed annexure. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :39619037

25 Apr, 2025 NA

Mumbai - Maharashtra

Tender For supply of transverse seat cushion item no - 6 size- 50x595x1814 mm to drg. no. ls 61177, alt nil & material specification conforming to rdso spec.no-c-k607 (rev-2) of dec-2015 with amendment sli p no-1 of august-2016. [ warranty period: 30 months after the date of delivery ]

Seat Cushion Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector