Latest seat repair Tenders | Government seat repair Tenders

CTN :45332593

05 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of tata large bus h10 clutch and pressure plate , tata large bus h10 release bearing , tata large bus h10 clutch slave cylinder , ambulance h 17 clutch and pressure plate assembly , ambulance h 17 release bearing , ambulance h 17 clutch slave cylinder , ambulance h 17 foot step reapir , ambulance h 17 driverand conductor seat repair , tata tc h13 starter repair , labour charge

CTN :45301175

02 Jun, 2026 NA

Palamau - Jharkhand

Tender For supply of machine equipments furniture items in nagar panchayat chhattarpur - executive table made of pre-laminated board (minimum 25 mm top, 18 mm sides), size approx. 7 ft 3 ft or larger, with side storage unit (l-type), drawers with lock, modesty panel, edge banded, termite resistant., ergonomic design, cushioned seat (minimum 40 50 mm foam), hydraulic height adjustment (for revolving chairs), strong base with castor wheels, load capacity 100 kg., visitor chair with cushioned seat and back, strong metal/steel frame with powder-coated finish, ergonomic design, and load capacity 100 kg, suitable for office use.seat size approx. 18 20 inch width with proper back support, non-slip legs or base, durable upholstery (fabric/leatherette), with minimum 1-year warranty, engineered wood cabinet, minimum 4 5 shelves, lockable, size approx. 6 ft height 3 ft width, powder-coated/laminated finish., office backdrop panel made of acp with high-quality printed vinyl or uv print finish, mounted on wall with proper framework, suitable for office branding/display.size as per site requirement, with smooth finish, durable material, and provision for logo/text display.(led backlit option preferred, with concealed wiring), designation board made of acrylic sheet (minimum 5 mm thickness) with uv printed or vinyl lettering, mounted on office backdrop with spacers for raised effect.size approx. 18 inch 6 inch (1.5 ft 0.5 ft) or as per designation length, with smooth finish, durable printing, and proper alignment on backdrop., photo frame made of wooden frame with glass/acrylic front, high-resolution printed photograph, wall-mounted with proper hooks.size approx. 12 inch 18 inch, with durable finish and neat border suitable for office display., indoor ornamental plant in decorative pot, suitable for office environment, low maintenance, air-purifying variety (e.g., money plant, snake plant, or similar), with pot size approx. 6 8 inch diameter, placed on desk/table., office pen stand made of metal material, multi-compartment design, durable and suitable for desk use, with neat finish and standard size., intel core i5 (latest generation 13th or above), 8 gb ram, 512gb ssd (expandable), full hd (21.5 or above) led monitor, keyboard & mouse, pre-installed windows 11 pro and ms office 2021 / microsoft 365 (original licensed), suitable for heavy office/multitasking work, with minimum 3-year onsite warranty (preferred brands: hp, dell, lenovo), color ink tank multifunction printer with print, scan and copy functions, automatic duplex printing, minimum print speed 20 ipm (black) and 10 ipm (color), print resolution 600 1200 dpi, suitable for high-volume office use.should have adf (minimum 30 sheets), support a4/legal sizes, wi-fi, lan and usb connectivity, refillable ink tank system with low running cost, supplied with full ink set, installation, and minimum 1-year onsite warranty. (preferred brands: canon, brother, epson, hp), line-interactive ups with minimum 600 1 kva capacity, pure sine wave output, backup time minimum 15 20 minutes for one desktop system, with overload/short circuit protection and audible alarm.should include built-in battery, led indicators, and support for automatic voltage regulation (avr), with minimum 1-year warranty., height adjustable table-top desk with manual/gas spring lift, sturdy frame, suitable for sit-stand office use, modular workstation units made of pre-laminated engineered wood (minimum 18 mm thickness) with edge banding, sturdy metal frame, and cable management provision, suitable for regular office use.each workstation shall have minimum working size approx. 3.5 4 ft width 2 2.5 ft depth per user, with partition panels, smooth finish, complete fitting/fixing, installation, and commissioning., ergonomic office chair with cushioned seat and back (minimum 40 50 mm foam), mid-back design, breathable fabric/mesh upholstery, and strong metal frame with load capacity 100 kg.should have fixed armrests, stable base without w

CTN :45275810

28 May, 2026 11.56 Lacs

Panchkula - Haryana

Tender For procurement of furniture for workstation of prefab staff room in pmda office sector 3, panchkula - providing, supplying and placing of workstation chair with cantilever flex system, three position back tilt limiter. seat/back assembly: the cushioned seat assembly consists of seat base moulded in glass-filled poly-amide, moulded polyurethane foam and upholstered with high stretch knitted polyester fabric. the cushioned back assembly consists of back inner moulded in polypropylene in-situ moulded with polyurethane foam and upholstered with high stretch knitted polyester fabric. back size : 45.5 cm. (/w/) x 53.0 cm. (h) seat size : 48.5 cm. (w) x 49.0 cm. (d) high resilience (hr) polyurethane foam: the hr polyurethane foam used in seat and back cushion is moulded in density min 48 kg/m3, and hardness load 15 2 kgf as per is:7888 for 25% compression. tilt mechanism, spines and spine connector: the seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi-dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjustments. the cantilevered seat offers impact cushioning while sitting and synchronises with the back movement during posture changes. the `s` shaped spines moulded in high strength glass-filled poly-amide and the spine connector moulded in glass-filled poly-amide form the back-spine structure involved in multi-dimensional recline motion. the variable tilt angle recline motion can be adjusted with 3 position tilt limit feature which should be inbuilt in seat base and the tension (return force) should be user weight dependent. adjustable armrests: the assembly consists of armrest housing sliding over the armrest structure, both moulded in glass-filled poly-amide: the height adjustment feature should be button operated having adjustment of 6.6 0.5cm. the armrest top should be made up of integral skin pu moulded over plastic inner moulded in glass-filled poly-amide. pneumatic height adjustment: the seating height can be adjusted with a pneumatic gas-lift having an adjustment stroke of 9.2 0.3 cm . pedestal assembly: the pedestal should be injection moulded in glass-filled poly-amide and fitted with 5 nos. twin wheel castors. the pedestal should be 66.0 0.5 cm. pitch centre diameter and 76.0 1.0 cm. with castors . twin wheel castors :5 nos. twin wheel castos are injection moulded in poly-amide having 5.0 0.1 cm wheel diamter assembled to the pedestal. overall dimensions of chair seat height - min 44.5 to max 53.8 cm. height - min 99.5 to max 108.8 cm. width and depth of chair as measured from pedestal - width-76.0 cm and depth-76.0 cm. the product should be greenguard, griha and iaq certified, providing, supplying and placing of workstation chair with cantilever flex system, three position back tilt limiter. seat/back assembly: the cushioned seat assembly consists of seat base moulded in glass-filled poly-amide, moulded polyurethane foam and upholstered with high stretch knitted polyester fabric. the cushioned back assembly consists of back inner moulded in polypropylene in-situ moulded with polyurethane foam and upholstered with high stretch knitted polyester fabric. back size : 45.5 cm. (/w/) x 53.0 cm. (h) seat size : 48.5 cm. (w) x 49.0 cm. (d) high resilience (hr) polyurethane foam: the hr polyurethane foam used in seat and back cushion is moulded in density min 48 kg/m3, and hardness load 15 2 kgf as per is:7888 for 25% compression. tilt mechanism, spines and spine connector: the seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi-dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjustments. the cantilevered seat offers impact cushioning while sitting and synchronises with the back movement during posture changes. the `s` shaped spines moulded in high strength glass-filled poly-amide and the spine

Central Government/Public Sector

CTN :45209532

03 Jun, 2026 NA

Erode - Tamil Nadu

Tender For supply of seat for wag 7 locomotive (cushioned) consisting of item a "seat" and item b "back rest" each 1 no. as per els/ed drg. no. srdee/rs/ed/misc-70 [ warranty period: 30 months after the date of delivery ] ]

CTN :45244570

29 May, 2026 3.84 Lacs

Latehar - Jharkhand

Tender For minor denting of safety glass frame and fitment of safety glass in dozers bd 155 sl no13723 n bd355 sl no 11900 and sd32w sl no 104870 along with bh60m dumpers sl no 60886 n 60886 and 60426 and cat773e sl no prb01065 along with operator seat repairin