Latest seawall repair Tenders | Government seawall repair Tenders

Central Government/Public Sector

CTN :45334840

19 Jun, 2026 NA

Mumbai - Maharashtra

Tender For providing safety fencing (rcc boundary wall) along the track in kyn-igp section at required location to prevent trespassing under sr. den/ne section.

Central Government/Public Sector

CTN :45336407

25 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply, installation, wiring, commissioning and testing of 1.8 ton inverter 5/3 star rated wall mounted split ac along with 1/2 and 1/4 copper pipe minimum 12 ft and drain pipe with foam insulation over copper pipe with suitable size of pvc cable and connectors conforming to is 732: 2019 or latest for wiring. accepted make of ac jare blue star, hitachi, panasonic, or equivalent at new bogie conference room along with complete wiring with 1.5 sqmm and 2.5 sqmm copper pvc cable as per site requirement and shall be done with suitable wiring and protection system protected with 40a 3/4 pole residual current circuit breaker of leakage current 30 ma and overload protection with mcb conforming to is:12640 part 2 or latest and iec 60898 part 1 or latest respectively and all electrical works shall be carried out in accordance with the provision of indian electricity act 2003 land indian electricity rules 1956 amended to date and all the safety codes and procedures outlined in the safety codes shall be complied with general and safety requirementshall be governed by is 13947 (pt i) 1993 and is:8623/1993, amended to date. [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45327429

30 May, 2026 2.98 Lacs

Jodhpur - Rajasthan

Tender For providing and fixing of various electrical accessories at district and session court metro jodhpur - sitc of ip20 smd mid power led batten type integrated light fixture made from powder coated extruded aluminium housing with in built driver , system lumen efficacy 110 lm/watt output only at cw (5700k to 6500k) , internal surge protection of 4.0 kv with short & open circuit protection ,thd 10% , p. f. 0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000 k / 4000 k / 5700 k /6000 k/6500 k (as per ansi bin) as required., 1170mm(+/-10%) led batten with min. lumen output 2200 lm, sitc of ip-20 led recessed / surface mounted, round / square backlit & smd mid power led downlight with power coated die-cast aluminum housing with uv stabilized non yellowish diffuser with bis compliance 4.0 kv surge protected isolated driver, with short & open circuit protection input 320vac-48 hr protection, input 350vac-2 hr protection), having efficiency > 85% . system lumen efficacy of 110 lm / watt,at cw (5700k to 6500k) , thd 10 % , pf. 0.95, cri >80, life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000 k / 4000 k/ 5700 k /6000 k/6500 k (as per ansi bin) as required., recessed mounting, minimum lumen output 1950 lm, sitc of ip20, 2x2 led surface/ recessed mounting backlit & smd mid power type led light fixture not less than 35 mm housing depth made from crca sheet steel housing, high purity / transmissivity uv stabilized non -yellowish diffuser for uniform light distribution. operating voltage range 140-285 v, hv cutoff - lv cutoff should be 300-100v . high efficiency with 4 kv internal surge protection bis certified isolated driver having efficiency > 85% , with short & open circuit protection ( input 320vac-48 hoursprotection,input 350vac-2 hours protection) (integral with light fixture). system lumen efficacy of 120 lm/watt ,thd 10 % , p.f. 0.95,cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000 k / 4000 k / 5700 k /6000 k/6500 k (as per ansi bin) as required., recessed mounting, minimum lumen output 4320 lm, providing & fixing of bee star rated copper wounded with class of insulation f, double ball bearing capacitor start, aluminium body & aluminium blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 with down rod up to 30 cm with secondary support safety cable ( steel rope) , cotter pin, shackle kit with 3 x 1.5 sq.mm pvc insulated flexible copper conductor and making connection testing etc. as required., 1200 mm sweep bee 1 star rated (service value >=4.0 to 4.5 ), providing & fixing of ventilating fans capacitor start, copper wounded, single phase with pvc impeller, abs body, automatic openable louver shutter in existing opening including making connection, testing etc. as required., 200 mm sweep minimum air delivery 450 cum / hour, providing & fixing of 450 mm sweep oscillating type wall mounting / pedestal type fans with three speed, on and off position, sintered iron bush oil impregnated, with metal front and back 120 or more ribs guard; three no. aluminium blades, minimum air delivery 100 cum. / minute , minimum service value 1.11 cum./min/watt, noise level should be = 75 db, power consumption = 120 watts, motor protection through thermal overload protection device, including fixing with anchor bolts, making connection testing etc. as required., wall mounting type with adjustable vertical angle, supplying and laying fr pvc insulated & unsheathed flexible copper conductor of following nominal sizes with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from copper, stranding in acc. to is:8130/iec 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation pvc type a/c/d , flame retardant as per is 10810-53, better amperage rat

corporations/Associations/Others

CTN :45328177

05 Jun, 2026 62.00 Lacs

Kaushambi - Uttar Pradesh

Tender For supply of materials and erection for shifting of control room pannel at 33/ 11 kv sub station bharsawa distt. kaushambi under deposit scheme on turnkey basis under edc, kaushambi - name of work: supply, carriage & erection of materials for control room pannel shifting of shiffting of 33/11 kv s/s bharsawa distt. kaushambi, supply of centralised materials, 11 kv switch gear 600/300/5a 350 mva i/c, 11 kv switch gear 200/100/5a 350 mva o/g, 11 kv 3x300 mm2 xlpecable, 11 kv 3x120 mm2 xlpecable, 24 volt battery, 24 volt battery charger, pcc. 8.5 mtr. long for feeder, 11 kv tpmo switch with fixing clamp, 11 kv top channel, 11 kv dropper angle, earthing complete, stay set complete, 11 kv polymer pin insulator, 11 kv polymer disc insulator, 11 kv disc fiting, 33 kv control panel t/f, acsr weasel conductor, supply of de-centralised materials, 11 kv 3x120 mm2 xlpe cable jointing kit o/d & i/d, control cable 4x2.5 mm2, control cable 2x2.5 mm2, g.i. pipe 6 " dia, rubber matting, clamp with nut & bosts, earth wire clamp for pcc pole, stay clamp for pcc pole, top channel clamp pcc pole, dropper channel clamp pcc pole, g.i. strip 35x6 mm, carriage of following material, pcc pole 8.5 mtr. long., structure of la, 33kv isolator, 33 kv cts, single t/f control pannel, 33kv vcb,11 kv outgoing. incoming pannel, battery & battery charger and other associated accessiories etc. (availibility at concern store center of store division), erection work, installation of 33 kv single transformer control pannel 2 no., incoming 2 no. and 7 no. outgoing in the switchgear room and grouting the pannel by rag bolt using cement, sand mortar in ratio 1:3. work includs fitting of all accessories in all respect with complete connection of control cable with pannel. all material will be provided by the contractor except vcb and crp., construction of cable trenchs with top cover and laying of control cable for vcb, c.t. & t/f control pannel etc. as per direction of engineer. trenchs to be 12 wide and 9 deep. work includes digging, of trench, concreting of the foundation in the ratio 1:3:6 r.b. wall 9 wide with cement mortar 1:4 and plastering inside the trench in the ratio 1:3 and sand filling in the trench. all material will be provided by the contractor., earthing of 11 kv indoor equipments, switchgears as per resspo drawing. with g.i. strip of size 35x6 mm. g.i. strip fully welded at both ends and to be connected with earthmat,, erection of dp with pcc pole 8.5 mtr long with all accessaries and grouting of the pcc pole with cement, sand and brick ballast ratio 1:4:8 size 0.45x 0.45x 1.5 mtr deep under the ground as per drawing no. res-6.(cement, sand, brick, ballast shall be provided by the contractor.), installation of 24 volt battery and battery charger with cabinet in the switch gear room, by grouting base channel 100 x 50 x 6 x 1000mm. fixing of rag bolt., laying of 11 kv 3x300/3x185/ 3x120 sqmm. xlpe cable by digging 0.75 mtr. deep trench, putting layer of sand in the bottom, ramming it, laying of cable over it rmt and covering the cable from sides and top by laying bricks, finally covering the same by earth and levelling of the same, all the materials, except cable, will be pvovided by the contractor., fixing and termination of outdoor/ indoor heat shrinkable cable boxes of size 3 x300/3x185/3x120 sqmm. xlpe cable. boxes will be supplied by the contractor, sundries ( as per site requirement/emergency work), safe dismantling of 11 kv o/g pannel & received back to store, laying of weasel conductor with the help of aluminium roller by hanging three nos. on each support in a manner taking sufficient care to ensure safety of weasel conductor against rubbing on ground, precaution for safety of crops is also to be taken. the work includes jointing of conductor by providing jointing sleaves, stringing of conductor upto correct sag and binding of conductor with insulators on each support. all material shall be provided by contractor such as join

CTN :45334382

02 Jun, 2026 5.86 Lacs

Multi City - Multi State

Tender For repair of damaged rr compound wall with repair & broken fencing and other miscellaneous works around building no.50, sector-ii, kane nagar for safety concerns of the campus on urgent requirement.subwork/packages:repair of damaged rr compound wall with repair & broken fencing and other miscellaneous works around building no.50, sector-ii, kane nagar for safety concerns of the campus on urgent requirement.

CTN :45322644

01 Jun, 2026 8.70 Lacs

Sawai Madhopur - Rajasthan

Tender For supply, installation, testing and commissioning of phase wire and street light and vairious electrical equipment needed for implementation of budget announcement 2025-26 - providing & fixing of ik08, ip 66 protected led street light luminaire on existing bracket/pole. fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with uv stabilized pc (uv stablization report submitted for uv cover ) /toughened glass cover and secondary lens on each led & should be smd type of 3 to 5 watt each . the system efficacy >=125 lm/ wt and potted driver & has a unique bis r number with input voltage ac 120 to 270 v ac with high voltage cutoff @>=300 v ac and auto resetting safety , power factor >0.95 driver efficiency >85% ,thd(i) 70 and cct 5700k +355k. surge protection shall be min 4 kv internal and min 10 kv external inside driver compartment. driver should be phase to phase protection of 440 v for 4 hrs. manufactures word mark/name engraved/embossing on die cast housing to allow traceability/authenticity. fixture shall be as per is 10322 complianced.oem must have its own in, led street light fixture with minimum lumen output 5600 lm, sitc of ip-42 and general construction confirming to is:8623 : 1993, wall/ free standing floor mounted dust and vermin proof compartmentalised cubical panel as specifications and other parameters required as per point (a) ,(b), (c),(d), (e), (f), (g), (h) as below:-(a)thickness of crca sheet shall be 2.0 mm, cable alley compartments having concealed hinged type doors with key type lock with / without detachable extension type structure. removable 3 mm. thick sheet steel gland plates with appropriate size of knockouts for cables shall be provided(b)complete panel shall undergo a process of degreasing, water rinsing, activation, derusting, pickling in acid bath, phosphatising & shall be subjected to nine tank process and then powder coated with approved shade of minimum 70 microns on both side of panel. the panel having pe foam/ neoprene rubber gasket of not less than 3mm thickness ,required hardware , concealed hinged door with key type locking arrangement for equipment/switchgear earthed with 2.5 sq.mm braided copper wire.[c) interconnection between bus bar and switchgears /cable shall be rigidly supported and made out by flexible copper wires (up to 63 amp ) and by solid bus bar (>63 amp ) . control wiring will be carried out with 1.5 sq.mm, earth wire with 2.5 sq.mm and ct with 2.5 sq.mm flexible copper wire only. all joints / interconnections of copper bus bar shall be dully tinned . clearance between main bus bar and risers / metal parts shall be at least 10 mm additional to width of bus bar bus bar is insulated by heat shrinkable sleeves . earth and neutral bus bar shall be half of the size of phase bus bar. ( cost of bus bar / flexible wire for interconnection between main busbar and switchgear is to be paid extra )(d)wiring between components within switchgear and incoming / outgoing cable shall be done through the terminal block only. direct connection shall not be permitted. each terminal block shall be one piece moulded, barrier type, 650 volt grade, complete with washers, heads, studs with two nuts and identification strips and shall have adequate continuous current rating. for tap-offs, adjacent terminals with shorting strips shall be used. 10% spare terminal blocks shall be provided. wire identification on marking strip shall correspond to the designation of the wiring diagrams. all wire terminals on the equipment shall also be marked with designation corresponding to those of the wiring diagram.(e)all wiring shall be enclosed in plastic channels and neatly bunched and closed in metering chamber, wiring between terminals of various devices shall be point to point (no wire splitting or tee connections) with wires neatly trucked along the back of the panels, adequately supported to prevent sagging.(f)floor mounted panel sh

CTN :45328987

08 Jun, 2026 NA

Sealdah - West Bengal

Tender For - repairing of damaged electrical items and supply of different electrical maintenance materials at 44 iron side road rhe. - repair of existing damaged led tube light / led mirror light/ led cove light/ led surface mount+ down lighter light with necessary driver should matching with existing specification (t5 output_ 18w 20w, 240ma)i) driver only, ii) led strip only, supply of 4ft long led smart bright tube light fitting with led tube light .(make: philips-type: bn 021 led40s- 6500 psu gr (4 ft) or equivalent model of crompton/jaquar)., supply of single fancy wall bracket led light fitting (make - philips, model no-31453 or equivalent model of crompton/jaquar) incl. 1nos 9 w led lamp (make:-philips or equivalent model of crompton/jaquar). of warm white colour lamp complete with all accessories, supply of 15 watt led surface mount+ down lighter light fittings including all accessories and mountings complete set as per direction of eic(make- crompton, type-lcdspln-r-15-cdl/ philips/ jaquar), supply of led 7.5 watt mirror light fittings complete with lamp including & all other accessories (make :philips:type jojoba wall light, model no. 34034/14/86 or equivalent model of crompton/jaquar)], fixing of 3 module 2w, 3000k led foot light fittings. incl. s/f 3 module ms flush box in wall as per approval of eic/authority., supply of single led light 12w, 1200 lm, 10,000 life hours, cdl led lamp ( make : philips / crompton / jaquar ), supply of modular soket type 2 module regulator (brand approved by eic), supply of step type electronics fan regulator (brand approved by eic), supply & fixing 1200 mm ceiling fan(max 60w) complete with all accessories, down-rod etc. (except regulator) [make:orient new air plus/crompton/usha striker plus /havells (cat no-fhcss1sbrn48)/ as per approval of eic.], supply of 450 mm sweep cabin fan (make:orient tornado wall ii or equivalent model of cg/havells/other brand as per approval of eic/authority] on wall by s&f rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd., supply of 09 sweep a.c. exaust fan metal body with all parts.make-epc, type-p23009/4(make : havells / orient / epc), supply of 200 mm sweep, modular exhaust fan (max 32w) complete with all accessories, [make:havells ventil/crompton/usha / as per approval of eic.], supply of 10ltr geyser having storage ; capacity: 10 litres; wattage: 2000 watts; pressure: 8 bars ; bee rating: 5 star; waterproof degree : ipx-4 protection for longer product life. adjustable knob for temperature settings between 25 degree c to 75 degree c to get the desired temperature, multi-function safety valve which protects tank from internal and external pressure build up including hot & cold water distribution pipe line. warranty- 2yearsmake:- havells(type- monza)/ venus/ v-guard, supplying of 1.1 kv single core stranded fr 2.5 sqr mm pvc insulated & unsheathed single core stranded copper wire (brand approved by eic) 100 mtr coil, supplying of 240v 6-16a sp mcb of breaking capacity 10ka & c characteristics (make: l&k / legrand / crabtree), supplying of 240v 40a dp mcb isolator(make: l&k / legrand / crabtree), supplying of 240v 63a fp mcb isolator(make: l&k / legrand / crabtree), supplying of 2.5 mfd condenser (tibcon), add. g.s.t.@ 18% (on total from item no 1 to 20) to be calculated by bidder, add. lwc.@ 1% to be calculated (on total from item no 1 to 20 + gst@18%) by bidder

CTN :45321178

31 May, 2026 43.05 Lacs

Kota - Rajasthan

Tender For construction of safety wall at kalareva mr near gumanpura village gp simlia in rmc distributary section in sub division digod

CTN :45317986

04 Jun, 2026 3.96 Lacs

Silvassa - Gujarat

Tender For supply of wall support ladder , safety ladder , fall arrestor , safety harness belt , scaffolding , tools to work at height

CTN :45291406

08 Jun, 2026 NA

Tiswadi - Goa

Tender For supply of studio ptz camera with wall-mount bracket , ptz controller , tripods , 160w soft panel led light , barndoor for 160w soft panel led light , 90w soft panel led light , barndoor for 90w soft panel led light , 80w soft panel led light , barndoor for 80w soft panel led ligh , set of clamps, safety bond cables and identification name plates , pantographs , collapsible 5 in 1 reflector 100 x 150cm , digital lighting console , power control system for led lights , digital dimming dmx network system , headphones , memory cards , portable external ssd 1tb , video switcher , preview monitors , wireless mics , audio mixer , studio monitors , podcast mics , podcast mic floor stand , sdi to hdmi converter , micro converter hdmi to sdi , studio audio recorder , condenser microphone for voice over recording , microphone stands , anchor earpiece , talkback microphone , network poe switch , network patch panel 24 port fully loaded with 1 meter patch cords , 19 inch teleprompter with tripod , interactive display 65 inch , floor stand for 65 inch interactive display , monitor screen 55 inch ) /bid number : gem/2026/b/7568195 * /dated: 22-05-2026 & & / bid document 1 / 30

Seawall Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

corporations/Associations/Others