Latest sec wire Tenders | Government sec wire Tenders

Central Government/Public Sector

CTN :45713879

20 Jul, 2026 NA

Jorhat - Assam

Tender For repairs to compound wall, fencing and gate with connected items in domestic area and omq area at afs under ge (af) jorhat - demolition of brick work built in cement mortar of any description complete all as specified and as directed., m&l for brickwork (old size) with sub class b bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed., all as per serial item no. 2 here-in-before but except bricks, using old serviceable brick as retrieved from demolition.note : old serviceable bricks obtained from serial item no. 1 above shall re-used., taking down cement plaster on brick or stone or concrete surfaces of walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed., m&l for rendering 15mm thick on fair face of brick works or concrete surfaces of walls with cm (1:4), finishing the surface even and smooth without using extra cement complete all as specified and as directed., m&l for preparation of new plastered surfaces of walls and applying two coats of cement base paint over and including one coat of alkali resistance primer complete all as specified and as directed., demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed., m&l for plain cement concrete (1:2:4) type b-0 (using 12.50mm graded stone aggregate) used as in benching and coping including necessary formwork complete all as specified and as directed., m&l for brickwork with sub class b bricks, straight or curved on plan to any radius in half brick thick walls, built in cm (1:4) complete all as specified and as directed., m&l for dismantling posts or struts (wood, steel or rcc) any section, including taking out embedded portion and making good to disturbed ground surfaces complete all as specified and as directed., m&l for plain cement concrete (1:3:6) type c-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete, etc. complete all as specified and directed., s&f hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing, etc. wind ties for roof including securing bolts posts and struts in fencing of size 65x65x6mm including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to fe-290 gde e-165 complete all as specified and as directed., dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed., s&f 11mm to 15mm dia of shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and onehexagonal or square nut, but length of bolt exc. 5cm but n. exc. 10cm complete all as specified and as directed., excavating in post holes (or similar holes) each n. exc. 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exc. 50m and making good surface as in soft/loose soil complete all as specified and as directed., m&l for preparation of new steel and iron surfaces of any description over 10cm width or girth not otherwise described for and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and as directed., m&l for mild steel tmt bar 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends binding wit

CTN :45594250

02 Jul, 2026 NA

Kawardha - Chhattisgarh

Tender For corrigendum : supply of galvanized steel barbed wire for fencing (v3) isi marked to is 278 (q3)

CTN :45694282

09 Jul, 2026 NA

Chhindwara - Madhya Pradesh

Tender For item supply for chain link fencing, rcc pole and barbed wire - 2026-27 . . . . . . . , galvanized steel chain link fencemesh line wire galvanized steel wire of 3.15 mm diameterfabric size 100x100 mmheight 150 cmline wire 2 numbers of line wire of 4.00 mm diameterstandard- conforming to is-2721-2003, withup to date amendments., rcc fencing poles hight 2.0 mtype straightlenght 2.00 mdimensions bottom 10x10 cm square, top 8x8 cm squarecement concretc mix cement, sand and metal ratio 1:2:4, with 12.5 nominal size coarse aggreate. sand used should be free from clay and salt, concrete mix shall be conforming to grade m-15 of is: 456:2000reinforcement 4 round vertical bars of 6 mm diameter. 11 no of stirrups of 6mm diameter round ms bare 20 cm centre to center.hooks- 5 no. bottom hook should be provided 60 cm above the bottom of the pole. second at 82.5 cm, third hook at 112.5 cm, fourth hook at 150 cm, top and fifth hook at 195 cm from bottom.manufacturing- in order to ensure desiredcompressive strength, rcc fencing poles should be compacted with the help of platform vibrators. surface should be uniform and free from voids. the concrete cover over the reinforcement should not be less than 1.5 cm, galvanised steel barbed wireline wire- galvanised steel wire of 2.5 mmdiameterpoint wire- galvanised steel wire of 2.5 mmdiameterbarbs distance between two barbs 75 mm, thebarbs shall have four points and shall be formedby twisting two point wires each two turns.tightly around both the line wires makingaltogether four complete turns.standard conforming to is-278-2009

State Government

CTN :45698104

06 Jul, 2026 19.19 Lacs

Mau - Uttar Pradesh

Tender For supply of galvanized steel barbed wire for fencing (v3) isi marked to is 278 (q3)

State Government

CTN :45696701

08 Jul, 2026 2.00 Crore

Dindori - Madhya Pradesh

Tender For galvanized chainlink fence and barbed wire as per specification

State Government

CTN :45691824

06 Jul, 2026 1.19 Lacs

Kangra - Himachal Pradesh

Tender For supply of galvanized steel barbed wire for fencing (v3) isi marked to is 278 (q3)

CTN :45673462

16 Jul, 2026 4.98 Crore

Bengaluru - Karnataka

Tender For supply, installation and commissioning of secured wired and wireless networking & rf connectivity at dmsbcu, central college campus, bengaluru

Central Government / Public Sector

CTN :45658747

03 Jul, 2026 NA

Murshidabad - West Bengal

Tender For supply of galvanized steel barbed wire for fencing (v3) isi marked to is 278 (q3)

State Government

CTN :45604576

07 Jul, 2026 50.00 Lacs

Narsinghpur - Madhya Pradesh

Tender For purchase of fencing material - galvanized steel barbed wire - line wire - galvanised steel wire of 2.5 mm diameter point wire - galvanised steel wire of 2.5 mm diameter barbs - distance betbeen two barbs 75mm, the barbs shall have four points and shall be formed by twisting two point wire each two turns, tightly around both the line wire making altogether four complete turns. all applicable bis/is standards, including all prescribed parameters, shall be deemed part of the technical specifications.