Latest secondary injection test kit Tenders | Government secondary injection test kit Tenders

State Government

CTN :45329358

02 Jun, 2026 95.5 Thousand

Jummu - Jammu And Kashmir

Tender For general repairs with replacement of defective parts of vibratory compactor 1453 p - repair to vibratory compactor by way of p/f of drum mount (v204029/60119) 03nos. f/r cable 752 (v204010/60045) 01nos. the job includes cost of material, labour, testing & all taxes., repairs to telescopic cylinder (steering) (rhs) by way of dismantling it from the machine and p/f of seal kit 01nos. (aps), hexagonal nut piston 01nos. assembling and mounting on the machine. the job also includes providing and fitting of hose steering - 02nos. (aps). the complete job includes cost of material, labour, testing and all taxes., routine servicing of vibratory compactor by way of providing and fitting of filter kit fuel 01nos. fuel pipe set 01nos, air filter inner 01nos, air filter outer 01nos, engine oil 18 ltrs, gear oil - 08 ltrs, hydraulic oil(for topping) 20 ltrs, grease 10kg. the job includes cost of material, labour and all taxes., repairs to the defective auto electric panel by way of replacement of ignition switch-01no, relay-01no, battery cables with thimbles-02nos, rectification to the charging circuit. the job includes cost of material, testing and labour charges and all taxes., rebate on account of old parts (absolute)

CTN :45326601

10 Jun, 2026 NA

Madurai - Tamil Nadu

Tender For supply of equipment for logistics department - paper tearing test measuring range 0 to 1000 mn capacity resolution 0.1 mn indication error 1 % tearing arm 104 1 mm tearing angle 27.5 0.5 tearing distance 43 0.5 mm, paper puncture testing machine energy range of weights - 6, 12, 24 joule per meter accuracy - 2% within full range release angle of pendulum - 90 display - led (digital) 7 segment power - 220v, 50hz,single phase highlights: sample holder - 1 pendulum release mechanism -manual material -mild steel finish - powder coated havel gray & gray combination finish and bright chrome/zinc plating for corrosion resistant finish, weighing machine max capacity (max) maximum load the scale can measure. (3 kg ), min capacity (min) minimum load required for accurate measurement. (0.25 kg), 0.1 g 1 g resolution, sling psychrometer, bursting strength tester capacity: commonly 0 40 kg/cm . accuracy: +or -1 % of the full range (often within 10% to 90% of capacity). resolution: 0.1 kg/cm . operation: microprocessor-based, digital display (lcd/led) with peak hold test fluid: glycerin (approx. 98% purified). power requirement: 220v, single phase, 50 hz. memory. clamping: pneumatic or manual, often with 1/4 hp motor. fluid displacement rate: 95 + or 5 cc/minute., digital micrometer (0-25mm with least count 0.0010) (0 25 mm, 0.001 mm), digital vernier caliper (0-150mm)

CTN :45327249

03 Jun, 2026 6.19 Lacs

Thiruvananthapuram - Kerala

Tender For sports division kunnamkulam-supply of gym equipment at sports division kunnamkulam lac, thrissur - retender - gym and sports equipment, od194241/2025-2026 : commercial leg extension - supply, installation, testing and commissioning of commercial leg extension having the following specifications: size (lxwxh): 1300 x 990 x 1350 mm. net weight: 223 kgs. weight plates: 109 kgs. pulley: 6.0 mm.steel tubing: 50 x 100 mm. steel thickness: 2.5 mm. seat: high density pu. weight material: cast iron. high quality rubber boots are used at the ends of the base pipes to avoid damage to the gym floor. scratch proof anti corrosive surface coating of thickness not less than 80 microns, preferably fusion bonded epoxy coating. pin loaded machine. premium quality equipment, od194240/2025-2026 : od199793/2024_2025 : commercial horizontal leg curl - supply, installation, testing and commissioning of commercial horizontal leg curl having the following specifications: size (lxwxh): 1650 x 1145 x 1645 mm. net weight: 232 kgs. steel tubing (d type): 70 x 130 mm. steel tubing flat oval: 50 x 120 mm. steel thickness: 3.0 mm. frame colour: silver. pulley: 105 mm (dia.). seat material: pu with once forming technology. seat colour: black. seat adj.system: 5 level (0~100mm range). weight stack: 100 kgs. weight material: alloy steel. high quality rubber boots are used at the ends of the base pipes to avoid damage to the gym floor. scratch proof anti corrosive surface coating of thickness not less than 80 microns, preferably fusion bonded epoxy coating. pin loaded machine. premium quality equipment, od194240/2025-2026 : od199663/2024_2025 :commercial squat rack - supply, installation, testing and commissioning of commercial squat rack having the following specifications: dimensions (lxwxh): 1660 x 1210 x 2160 mm - frame: 100 mm x 50 mm rectangle pipe fabricated solely from 11 gauge rugged wall structural rolled steel tubing, heavy duty ensures superior strength - net weight: 101 kg - weight disc diameter adapter: 28/50 mm - max load: 200 kg - max user weight: 150 kg - high quality rubber boots are used at the ends of the base pipes to avoid damage to the gym floor - scratch proof anti corrosive surface coating of thickness not less than 80 microns, preferably fusion bonded epoxy coating - accessories: pull down bar, pull triangle - bar support pegs can be positioned from 55 to 180 cm in 5 cm intervals. brand: decathlon or similar make, od194238/2025-2026 : olympic weight plates - 20kg - bumper plates made up of high-quality natural rubber. manufactured with iwf standard specification, i.e. 450mm in diameter & 50.4mm collar opening with steel ring. thinner plate profile & thicker raised flanges around the edge. matte finish with easy to clean property. white-on-black lettering design. built to withstand falls even from overhead. bounce less when falls down. 2 year warranty. weight tolerance - 2%. thickness - 72 mm. brand: bullrock black rubber bumper plates 2.0 or similar make., od194237/2025-2026 : olympic weight plates - 15kg - bumper plates made up of high-quality natural rubber. manufactured with iwf standard specification, i.e. 450mm in diameter & 50.4mm collar opening with steel ring. thinner plate profile & thicker raised flanges around the edge. matte finish with easy to clean property. white-on- black lettering design. built to withstand falls – even from overhead. bounce less when falls down. 2 year warranty. weight tolerance - 2%. thickness - 58 mm. brand: bullrock black rubber bumper plates 2.0 or similar make., od194236/2025-2026 : olympic weight plates - 10kg - bumper plates made up of high-quality natural rubber. manufactured with iwf standard specification, i.e. 450mm in diameter & 50.4mm collar opening with steel ring. thinner plate profile & thicker raised flanges around the edge. matte finish with easy to clean property. white-on- black lettering design. built to withstand falls – even from overhead. bounce less when

CTN :43322060

27 May, 2026 NA

Gurgaon - Haryana

Tender For bid to ras bid to ras supply of ductable ac 8.5 tr , refrigerant piping as above for 8.5 tr machine , drain piping 25 mm dia , supply and fabrication of ms structure to support the machine, outdoor and ducting , control cable , power cable 4c x 6 sqmm , power cable 4c x 50 sqmm , ms cable tray 50 x 100 x 50 x 1.6 mm , 22g oval ducting , supply of fire-retardant flexible canvass connections , supply of anodized extruded aluminium supply air double louver grills with volume control damper , supply of electrical panel with 1 no suitable capacity incomer and 6 nos suitable rating outgoing feeder for ductable units , providing of outdoor stands duly painted , providing of ss 304 drain tray under the ductable units , supply of portable air conditioner capacity 1 tr , installation testing and commissioning charges , freight charges including packing forwarding, transportation, insurance and unloading of material

Central Government/Public Sector

CTN :45335843

15 Jun, 2026 NA

Bhavnagar - Gujarat

Tender For supply, installation, alignment and callibration after fitment of base plate for spring testing machine. size -40x40x4 cm, material as per is 18752a, fe: 99.17%(+ or - 0.14% ) and mn: 0.83% (+ or - 0.20%) [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45337367

01 Jun, 2026 NA

Bhopal - Madhya Pradesh

Tender For supply of overhauling , installation, testing & commissioning of deutz engine serial no. 9174610 (model no. bf12l513c) released from bcm-395 machine including fitment of spares as per annexure a . scope of work: - 1. collection of engine from the zonal track machine depot rkmp wcr.2. complete overhauling, and spares will be changed as per annexure a 3. after overhauling and painting, the engine must be properly packed and delivered to ztmd rkmp. 4. after the delivery of the overhauled engine, installation, commissioning, and a minimum of two trial blocks should be carried out in the presence of the firms service engineer. 5- at the time of engine delivery, the all released material of engine should be deposited with ztmd warranty-1200hrs from the date of fitment on the machine. make-deutz and equivalent ]

Central Government/Public Sector

CTN :45284827

29 Jun, 2026 NA

Lucknow - Uttar Pradesh

Tender For design, manufacture, supply, erection, testing & commissioning of a ten passenger elevator (lift) (g+4) machine room less & gear less with five stop complete in all respects as per rdso spec. . rdso/2013/em/spec/0016 (rev '2')-2025 or latest with a warranty period of 30 months from date of delivery or 24 months from date of commissioning, whichever shall be sooner and along with a comprehensive annual maintenance contract for 5 years after 2 years of warranty period. during the warranty period of 2 years, annual maintenance contract will be provided free of cost. the camc will cover periodical servicing, maintenance, and repair of lifts, inclusive of all spares, material and labour costs for five years. camc will start after the completion of the warranty period of 2 years. make-jhonson, otis, schindler, omega, mitsubishi or similar. (detailed description as per annexure-b) [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45254215

26 May, 2026 NA

Phaltan - Maharashtra

Tender For supply of material as per boq specification for grampanchayat mazeri taluka phaltan - 2 kw on-grid solar system (with net meter) capacity: 2 kw (grid connected, no battery) solar panels: mono/poly, 400 550 wp, mnre approved inverter: 2 kw grid-tie, mppt, single phase mounting: gi/aluminum roof structure protections: earthing, lightning, dcdb/acdb net meter: bi-directional (discom approved) area required: 150 200 sq.ft. generation: 8 10 units/day warranty: up to 25 years (panels), intel celeron 7305, all-in-one pc (8gb/256gb/windows 11/ms office 365 basic (1year)*/office 2024/black/4.84 kg), with wireless keyboard & wireless mouse,, all-in-one wifi colour printer |up to 4000 black & 6000 colour prints i print,scan & copy for home/office, ipd board, instant s blood glucose glucometer kit with vial of 10 strips, 10 lancets and a lancing device free for accurate blood sugar testing, oxygen machine, digital bp operator, water filter 15 ltr, ms sheet material office kapat 7x3, table 5x2, 2 mp hd basedx4, cctv system with100meter cable, 500gb hard disc, 4ch dvr and all accesiries.

Central Government/Public Sector

CTN :45066278

25 May, 2026 NA

Ratlam - Madhya Pradesh

Tender For supply installation testing and commissioning of signalling material in connection with following work:- 1)- tajpur additional loop line in connection with simhastha 2028.2)-naikheri yard remodeling with additional loop and stabling line in connection of simhastha 2028.3)-rajendra nagar provision of stabling line in connection with simhastha 2028.4)-pingleshwar emergency crossover in connection with simhastha 2028.5)- barlai additional loop line in connection with simhastha 2028.6)- vikram nagar extension of machine siding and dead ends of line number 1 to stable full length trains in connection of simhastha 2028.

State Government

CTN :45249557

29 May, 2026 50.00 Lacs

Balotara - Rajasthan

Tender For annual rate contract for providing new water service connection with material under division balotra - providing household tap connection as per technical specification and approved drawing as per relevant is code (amended up to date) from hdpe/upvc/di/ac/ms/gi pipe line up to consumer meter/premises by using pp mechanical integrated saddle with inbuilt flow control valve made out of ss316 designed for 5 lpm discharge at 0.5 bar pressure , not exceeding the flow of 7 lpm at 2 bar and a compression elbow, moulded in single piece/ fusion welded (complete job) including digging out suitable size of pits and trench for laying service line in all kinds of soil; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including gm full-way valve (is:778 mark) or wheel valve and specials with 20 mm nominal dia mdpe pipe pe 80 pn 16 as per iso 4427 / 20 mm nominal dia ppr-c (three layered) pipe pn16 sdr 7.4 (is:15801:2008) (isi mark) and above ground level using ppr-c pipe with standard ppr fittings/ gi pipes in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . the service line should be laid at least 45 cm below ground level. note: road cut and restoration is not part of this item and paid separately. for connection with 20 mm dia mdpe/ppr-c pipe length up to 05 mtr. rate is exclusive of gst., road cutting for house hold service connection in minimum trench width wherever road crossing is required. road cutting of cement concrete,wbm, black top etc. of all thickness shall be done by using a concrete cutter machine keeping minimum trench width and restoration of the road with cement concrete with pcc m-10 and cc m-30 grade as per specification and direction of engineer in charge.(06 meter) rate is exclusive of gst., add extra over item no 1.21, 1.22 & 1.23 for providing 20 mm pe 80 pn 16 as per iso 4427 mdpe pipe including excavation, providing, laying & jointing of service line above 5.00 mtr. rate is exclusive of gst., road cutting charges for pit of size 1.0x1.0 mtr for providing connection dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by cc cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. (0.30 cum) rate is exclusive of gst., road restoration charges for pit of size 1.0x1.0 mtr for providing connection providing and laying in position cement concrete m10 grade nominal mix 1:3:6 (1 cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work. (0.10 cum) rate is exclusive of gst., providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement

Secondary Injection Test Kit Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

State Government