Get complete information related to latest Security Item Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Security Item Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Security Item Tenders.
Tender For supply of alarm signal disc [ fabricated ] to drawing no. icf/std-3-5-011 alt [ 2 ] [ warranty period: 30 months after the date of delivery ] ]
Tender For supply of 2.2 kw ac crane drive , 5.5 kw ac crane drive , 11.0 kw ac crane drive , 22.0 kw ac crane drive , 37.0 kw ac crane drive , 55.0 kw ac crane drive , 75.0 kw ac crane drive 3 phase, digital ac crane drive 2.2 kw, ac drive should be suitable for heavy duty operation of 2.2 kw. offered ac drive should be suitable for crane-hoist operation. if, separate software required for crane application, it must be clubbed with supply of material. ac input voltage: 380 to 480v ac 10%, 3 phase, 3 wire, 50 hz; mode of control: bi-directional fully controlled 3-phase ac; speed regulation: 1% of base speed; braking: suitable dynamic braking resistance and chopper unit (external or in-built); acceleration time: 0.1 to 1000s or better; deacceleration time: 0.1 to 1000s or better; overload: 150%-1min, 200%-3.0s; ambient temperature: 0 to 50 c (derating shall not occur below 50 c. in the event that derating occurs below 50 c, the supplier shall provide a higher-rated drive to match the requirement); rated current at 50 c: min. current should be 5.5 amps at 50 c; high starting torque at low speed: 200% starting torque at 0.3 hz; two analog inputs: two nos. analog inputs having signal voltages of 0 to 10 vdc or 4 to 20 ma (configurable); two analog outputs: two nos. analog outputs having signal voltages of 0 to +/-10 vdc or 4 to 20 ma (configurable); six digital inputs: pnp/npn; one relay output: with short-circuit and overload protection; two digital outputs: with short- circuit and overload protection; brake release signals: outputs braking signals based on inverter operating conditions to prevent cargo bed rollback and overrunning; load adaptive control: when the actual load level is lower than the configured load level, the system can be operated at a ratio-multiplied speed (in terms of the configured frequency), resulting in significantly better efficiency; load ) /bid number : gem/2026/b/7563714 * /dated: 20-05-2026 & & / bid document 1 / 29 frequency), resulting in significantly better efficiency; load limiter: maintains the safety and rescuability of suspended loads by stopping when excessive torque is detected and by allowing operation only in the direction opposite to that in which the excessive load was detected; cooling capacity degradation alarm: detects and displays cooling capacity drop due to cooling fin clogging caused by dust and cooling fan airflow reduction; igbt life expectancy forecasting: estimates the power cycle life expectancy of the main circuit s igbt semiconductor device temperature due to frequent acceleration and deceleration stoppages, and displays the estimate before the design life is reached; protection: it must have all standard protections like stall protection, instantaneous power failure, single phasing, over voltage, under voltage, over current, inverter overload, thermal overload etc; display console: it must have alpha numeric display console for programming of drive, fault display and operating condition; dynamic qr code: it must have dynamic qr code for trouble shooting; tuning facility: it must have auto tuning facility. this must enable perfect matching of motor coupled to load with regards to optimum acceleration time, deceleration time, speed regulation etc; drive programming software: suitable drive programming software along with necessary connecting cable and adapter for connection with laptop and drive should be provided to get online with the offered drive (laptop not in scope); automatic voltage regulation: it must have automatic voltage regulation function to maintain high starting torque even at reduced voltage; regenerative option: it must be capable of regenerative operation; communication protocol: modbus (rtu/serial) or ethernet (tcp/ip); make of drives: fuji- electric/yasakawa/schneider/abb only; suitable dynamic breaking resistance unit of 60% wattage rating of drive, however the value of resistance is to be decided by manufacturer as per their technical manual for crane-ho
Tender For supply of passenger emergency alarm signal device with fixed key arrangement to drg.no rdso sk.97017, alt.2, appendix-j of specn.02-abr-2002, amendt.no.4 of sep.2016 [ warranty period: 36 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
Tender For tender for supply of signal module , manual call point siga 270 edwards , electronic hooter , power supply card , fire alarming loop card , fire alarm module-3-cpu3 , isolator module , communication card , fire network communication card , control relay module , monitor module interface unit
Tender For supply of ultrasonic level transmitter , pressure gauge , load cell , magnetic flow transmitter , flow control valve , limit switch , pressure gaguge , pressure transmitter , zero speed switch , flow transmitter , pull cord switch , pressure switch 7 bar , pressure gauge , radar level transmitter , pneumatic operated on or off ball valves , temperature gauge , temperature switch , pressure indicating transmitter , level switch , solenoid valve to lift rack up and lower , pressure switch , limit switch , bed mass transmitter , bed level transmitter , rake level transmitter , moulded case circuit breaker , rotary drive kit , motor protection circuit breaker , power contactor , semiconductor fuse , vfd , miniature circuit breaker , control transformer , potential transformer , ups , led indicating lamp for r phase red , led indicating lamp for y phase yellow , led indicating lamp for b phase blue , led indicating lamp for feeder on red rating 230vac , led indicating lamp for feeder off green rating 230vac , led indicating lamp for feeder trip amber rating 230vac , opaque actuator with holder push button for feeder start green , no block , opaqueactuatorwith holder push button for feeder stop red , nc block , opaque actuator with holder push button for dosing pump speed , opaqueactuatorwith holder push button for alarm reset black , opaque actuator with holder push button for alarni acknowledge yellow , mushroom actuator , 1nc 1 nc contacts , 1 way plastic control stations with yellow cover , 2 pole 2 way selector switch for feeder local , auxiliary relay , socket , auxiliary plug , signal isolator , panel top indicator , power supply module , plc , pneumatic operated on off ball valves , di or do card , ai or ao card , di card , hmi , ethernet switch , industrial ethernet cable 2x2 , rj 45 connetor , door mounted limit switch , tube light , enclosure heater , thermostat , utility socket , 6 inch fan and filter , vacuum gauge 3 by 8 inch bsp , pressure gauge 3 by 8 inch bsp //bid details 2 / 74
Tender For tender for supply of sitc and maintenance of addressable fire alarm and detection system at uco bank - supplying , installing , testing and commissioning approved make microprocessor based multi-loop , networkable addressable 02 loop fire alarm control panel with minimum 10 inch 1024x600 resolution lcd with touch capability , including audible and visible feedback , backlit by a long life , solid-state lcd. it shall also include a full qwerty-style keypad on the color , touchscreen display. the display shall have the ability to scroll events by type (i.e. fire alarm , supervisory alarm , trouble , etc) using the touchscreen with customizable buttons , 10000 history events & autolearn feature for programming. the system can be supported upto 2000 generation zone & 2000 logic zone & 50 releasing zone. the panels in network having true peer to peer provision. the panel shall have provision to support up to 50 releasing zones to protect against 50 independent hazards.the panel should be equipped with sufficient numbers of loops considering 20% spare capacity in each loop and shall be extendable upto 10 loops. , supplying , installing , testing and commissioning approved make modbus interface gateway for communication with bms / other utilities. modbus shall support supports reads of up to 100 registers at a time. modbus gateway shall act as an independent node communicating on the peer to peer network and shall not be dependent on the fire panel cpu for operation. modbus over tcp/ip , meets ul 864 , 10th edition requirements , supports two modbus masters & monitored 10 cpu nodes . failure of fire panel cpu shall not result in failure of modbus gateway. the gateway card shall be ul listed , the mimic annunciator for the fire alarm control panels (facp). this provides the facp with remote , serially-connected display. a five inch touchscreen display provides system status , point information , and event counters. the display shows two events simultaneously , and pages through up to 50 of the highest priority events in the system. the remote display also provides system control with six programmable softtouch buttons as well as acknowledge , silence , reset and drill. , supplying , installing , testing and commissioning approved make addressable multi-criteria photo-thermal detector with sensitivity range of 0.5 to 4.0% obs/ft.the intelligent multi criteria detection device shall include the ability to combine the signal of the thermal sensor with the signal of the photoelectric signal in an effort to react hastily in the event of a fire situation. it shall also include the inherent ability to distinguish between a fire condition and a false alarm condition by examining the characteristics of the thermal and smoke sensing chambers and comparing them to a database of actual fire and deceptive phenomena. the detector shall have twin bi-colour led for 360 deg viewing. addressing shall be with user friendly rotary decimal switches. detectors having base addressing must provide protective cap. detectors with soft addressing must provide programming tool. the detector sensitivity (day & night) shall be controlled from the panel to get accustomed to the local environment. the detector shall be ul listed & fm approved. , supply , installation , testing and commissioning addressable self-test multi-criteria photo-thermal detector with sensitivity range of 0.5 %/ft to 4.0 %/ft obs. intelligent multi criteria detection device shall include the ability to combine signal of the thermal sensor with photoelectric signal in an effort to react hastily in the event of a fire situation. , supplying , installing , testing and commissioning approved make addressable manual call point ( break glass type). the device shall have an led which shall blink in normal state & get steady on activation to monitor the heath status of the device. the device shall be ul listed & fm approved. , supplying , installing , testing and commi
Tender For supply of poh kit for passenger emergency alarm signal device consisting of 10 items (rdso design) and conforming to rdso specn. no 02-abr-02, amendment no. 4 of sept 2016 appendix- j. full description of 10 items and drg. attached in annexure - a. note :- item to be procured from approved vendors as per uvam item id. - 2300153, sub item :- 2300153001 [ warranty period: 36 months after the date of delivery ]