Latest sediment corer Tenders | Government sediment corer Tenders

Central Government/Public Sector

CTN :45064002

23 May, 2026 NA

Ranga Reddy-T - Telangana

Tender For supply of ring spanners set , allen keys long ball point set (1.5 to 10 mm) , allen keys long ball point set (1/16 to 3/8 inches) , hand oil pump , grease gun (lever type) , bucket grease pump with trolley , hydraulic bottle jack 2 ton , hydraulic bottle jack 3 ton , hydraulic bottle jack 5 ton , hydraulic bottle jack 10 ton , bench vice with fixed base , needle files set 140 mm , needle files set 160 mm , drill driver , billet level /spirit level , torpedo level/ spirit level , combination spanner set , shallow offset ring spanner set crv , adjustable wrench 8" , adjustable wrench 12" , long nose plier 6" , long nose plier 8" , plier circlip external (bent) , plier circlip internal (bent) , plier circlip straight external , plier circlip straight internal , curved lock plier mat handle , straight jaw locking plier , slotted screw driver , pipe wrench , hacksaw frame with blade , sledge hammer with wood handle , bearing pullers , line testers , small angle grinder(4 inch) , blower , heavy duty heat gun , welding helmet , mixed tools set , 3 in 1 mobile tools storage box , handheld torch light , polyster webbing sling lifting belt for crane hoist material handling. , combination spanner set (inches) , torque wrench ( 5 to 25 n-m) , torque wrench ( 10 to 50 n-m) , impact drill machine , pipe wrench 450 mm-18" , 1/4 inch sq. drive socket set 6 pt met , oxygen acetylene torch kit (used 13 1 for welding, brazing and cutting) , 1/2 drive pear head ratchet set metric , double open end spanner set

Central Government/Public Sector

CTN :45054942

11 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - pl.no. 98322000. condemned and unserviceable guillotine shearing machine with motor, pulley, back gauge, blade, drive assembly, plate clamping assembly and without electrical panel. id no.314105050, u/c no.120124001.make: batliboi and co. vide udm scrap advice note no. 012282-25-01479 dt. 17.03.26. approximate total weight - 11500 kgs [mild steel-11410 kgs, cast iron -30 kgs, brass/bronze -20 kgs, copper-30 kg, wastage-10 kgs]. note: 1. rate per number should be quoted. 2. as is where is basis. 3. cutting and dismantling is permitted. 4. crane loading is permitted. 5. digging is not permitted 6.incoming cables to the motor terminal are not for sale. 6. custodian should cut the power supply during delivery if required. 7. the total weight and break up of the total weight is approximate. railway is not responsible for any shortage of weight. 8. the purchaser may visit the machine offered for condemnation and check the site conditions for delivery feasibility before quoting the offer 9. purchaser has to make his own arrangements such as tools, lifting tackles, lifting equipment, gas cutting equipment and necessary trained men. 10. the purchaser will be held responsible for any damage/fire accident caused to the railway property. 11. after completion of delivery purchaser has to keep the cutting and loading spot neat and clean. custodian: sse/mmw/goc

Central Government / Public Sector

CTN :45054924

12 May, 2026 NA

Multi City - Telangana

Tender For auction sale of others - 74081-26-04-001-hyb-mly- ms water tank: scrap. cond. unserviceable ms water (predominant ferrous structure) consisting of rails and ms flats, pvc water tanks. total nominal weight of lot=87.12 mt. total number of ms water tanks=01. the offered is for sale and for dismantling/demolitionpurpose available under the jurisdiction/custody of sse/works/mly, delivery by actual weightment basis only. (please check lot image for inventory and photos of the material) location. available inside tsmd compound- moula ali. ds 8 no. 074081-26-00020 dt.17.04.2026. state telangana. pl no.98050011 hsn code. 72044100. refer to depot conditions for gstin of state railways, list of holidays and other conditions. special conditions. 1. approximately, 100 meters distance material shifting shall be done by purchaser to reach proper approach road. 2the tsmd pitwheel lathe ohe line is available beside the water tank. therefore care shall be taken while dismantling. 3.in order to make an assessment the purchaser may visit the lot location and inspect the lot and satisfy themselves before bidding. 4. post-auction no representation shall be entertained. 5. the purchaser shall be liable to make good any damage loss caused to railway property during cutting and delivery. 6. the bidder should provide proper barricading all-round the structure to prevent damaging of adjoining structures from dismantled material and not to endanger the safety of human beings and public/ private property in vicinity. purchaser should place safety banner surrounding the work place/ spot. 7. gas cutting is permitted. 8. the purchaser has to make his own arrangements such as tools, lifting tackles, gas cutting equipments and necessary trained men for cutting, loading & clearing the debris etc. they should have fire fighting arrangement and first aid box for any emergency. 9. delivery by actual weighment basis only.

State Government

CTN :44839212

07 May, 2026 68.3 Thousand

Shivpuri - Madhya Pradesh

Tender For corrigendum : enquiry for the work of testing of pressure vessels,lifting tools and tackles and preparation of on site emergency plan for 3x20 mw mhps mppgcl shivpuri.

State Government

CTN :45039100

21 May, 2026 1.34 Lacs

Multi City - Karnataka

Tender For testing inspection and certification of pressure vessels, lifting tools and tackles at supa power house

State Government

CTN :45046874

08 May, 2026 12.36 Lacs

Multi City - Karnataka

Tender For 1)inspection of stator coil for identification of exact no. of the faulty coil and setting up the arrangements for rotor pole coils removing and rotation as per scope of works along with supply of materials and other consumables as per scope of works2)de-brazing the rotor pole terminations and removing the rotor poles (as required). dismantling of rotor poles using suitable and compatible tools, fixtures, and lifting arrangements. ensure safe handling and proper marking for reassemble. rotate and position the rotor appropriately to access the damaged stator coil area.3)remove insulation from both ends of the affected winding section.4)de-brazing of defective coils. 5)driving out the slot wedges carefully remove wedges from stator winding slots without damaging adjacent coils or core.(entire stator winding shall be inspected in case of loose wedges, worn out wedges and missing wedges shall be replaced) along with supply of materials and other consumables.6)insulation removal- remove insulation from both ends of the affected winding sections.7)cutting the coil bindings in both sides. cut the identified damaged winding portion using appropriate tools. carefully pull out the damaged coil from the stator slots without affecting surrounding windings.8)damaged winding cutting- cut the identified damaged winding portion using appropriate tools.9)winding extraction- carefully pull out the damaged coil from the stator slots without affecting surrounding windings. while removing the faulty coils from stator, utmost care should be taken to prevent any damage to stator core.10)removal of faulty coils from the slot.11)slot cleaning and preparation-clean stator inner tooth slots thoroughly. use emery paper to smoothen and maintain uniform slot condition.12)cleaning of carbon deposits/heavy oil content from complete stator coils through co2 cleaning process /dry ice blasting.13)new coil installation-insert new stator coil with proper alignment. fix securely using new wedges of appropriate grade and size.14)brazing of the coil ends.15)re-fixing the rotor poles and connecting them.16)insulation application-apply insulation as per specified class (e.g. class f/ classh). ensure proper curing and finishing.17)complete co2 / dry ice cleaning of stator and rotor.re insertion of removed rotor poles. 18)final checks & testing- insulation resistance (ir) test, high voltage (hvdc) test, continuity check, visual inspection and any other tests which are required (will be carried out by kpcl).19)assembling of removed damper doors and stator covers.20)maintain quality standards throughout the process & use calibrated tools and approved materials.21)presence of the agency during excitation and synchronization of the unit by kpcl.22)safety & quality-follow all safety procedures and ppe requirements

State Government

CTN :44962077

21 May, 2026 62.40 Crore

Sindhanur - Karnataka

Tender For survey,investigation,design,supply,erection,testing & commissioning of lift scheme for supplementing water to the suffering atchkat in d-36 from ch 842 to ch 1280 (tewc),under tlbc by lifting water from tungabhadra river near salagunda in sindhanur tq,raichur dist on turnkey basis,phase i work comprising of construction of intake structure,jackwell cum pumphouse, pumping machineries, 33/6.6kv electrical substation,33kv transmission line,110/33kv transformer bay with 33kv terminal bay rising main(2.74km) including supply of spare parts & tools, o & m for five years after successful commissioning of the work under salagunda lis phase-i works on turnkey basis

corporations/Associations/Others

CTN :45021663

05 May, 2026 NA

Valsad - Gujarat

Tender For annual rate tender for purchase of materials of construction / road resurfacing for year 2026-27 - brick, sand, kapchi 25 to 40 mm, grit 6 to 10 mm, handmade metal 40 to 63 mm, rubble 9 inch, cement (53 grade) 50kg, tor steel, 60 mm rubber rise, m40 paver block, 80 mm rubber rise, m40 paver block, g.s.b., dust (powder), brick masonry (1:6), stone masonry (1:6), plaster (1:4), r.c.c. slab filling 1:2:4, (to give the price of steel separately in kg), r.c.c. slab filling 1:1/2:3 (to give the price of steel separately in kg), p.c.c. (1:3:6), p.c.c. (1:4:8), pointing (1:2), yellow soil, hard murrum, handmade metal, np3 pipe 300mm, np3 pipe 450mm, np3 pipe 600mm, np3 pipe 900mm, np3 pipe 1200mm, j.c.b machine (including diesel driver), roller (including diesel driver), truck (including diesel driver), hydraulic center trailer (including diesel driver), semi dense carpet patch work on various roads in pardi municipal area, building materials and soil lifting work from pardi municipal area, compounding of tarkhuta in pardi municipal area (excavation including five wire, cross wire, cement pole), waterproofing, two coat putty or two coat of primer (including brushing), wall painting (three coat) with plastic emulsion paint, ceiling painting (three coat) with plastic emulsion paint, outer wall painting (three coat) with weather proof acrylic emulsion paint including priming coat, box cutting the road surface to proper slope and camber for making a base for the road work including removing the excavated stuff and depositing on the road side slope as directed upto 50 mt lead., scarifying gravelled macadam or bitumen macadam surface 6 cm to 10 cm depth including stacking useful materials on road side and disposing off remaining stuff, construction of granular sub-base by providing well-graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix-in place method with rotavator at omc and compacting smooth wheel roller to achieve the desired density, complete in two layers as per technical specification clause 401., providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density in two layer. by mechanical means with 1 km lead, providing and laying bituminous base course 75 mm thick compacted in two layers with tack coat of asphalt (vg-30) 80/100 at the rate of 2.5 kg/10 sqmt and using b.t. stone aggregates of required gradation and asphalt 80/100 grade for mixing @ 1.99% by weight of total mix including heating the aggregate and asphalt by drum mix plant and spreading the same by paver finisher and consolidation with vibratory roller including providing all materials, equipment’s, tools and plants, oil, kerosene, fire wood, labour charges etc. complete., providing and laying 50mm thick compacted b.m. with b.t. aggregate as per mort&h specification and asphalt grade (vg-30) 80/100 for tack coat at 2.5 kg/10 sqmt with mechanical sprayer and bitumen grade 80/100 for mixing at the rate 34.0 kg/m.t. i.e. 3.4% of total mix including heating the aggregate and asphalt by drum mix plant and spreading the same by paver censor finisher and consolidation with vibratory roller including providing all materials, equipments, tools and plants, oil, kerosene, fire wood, labour charges etc. complete., providing and laying 25 mm thick compacted semi dense bituminuous concrete using stone chips as per mort&h gradation and asphalt grade (vg-30) 80/100 for tack coat at 2.5 kg/10 sqmt with mechanical sprayer and 80/100 grade asphalt for mixing @ 5.0% by weight of total mix for binder including heating the aggregate and asphalt by drum mix plant and spreading the same by paver finisher and consolidation with vibra

Central Government And Public Sector

CTN :45037392

28 May, 2026 NA

Bangalore - Karnataka

Tender For (1) design, manufacture, supply, erection, testing and commissioning of 5 ton eot crane for extension of wheelset stacking area of assembly as per rwf technical specification no.rwf/m&p/assy/2025/5 t eot crane enclosed. (2) maintenance spares as per schedule-iv and additional spares and items viz. slings / lifting tackles as per schedule-i of specification. (3) any other essential spares for two years normal maintenance to cover the complete range of mechanical, hydraulic and electrical equipment as per clause 1.3 of specification. (4) maintenance tools as per schedule v of specification. (5) any other accessory treated asconcomitant accessory. ]

Central Government And Public Sector

CTN :44687431

30 Apr, 2026 NA

Raebareli - Uttar Pradesh

Tender For corrigendum : tender for supply of calibration of aviation standard tools and equipments : : - battery charger alpha c20/25 , battery charger alpha c20/25 , battery discharger bc 5000 , battery discharger bc 5000 , multimeter fluke 179 , torque wrench 5-35 nm , dc power supply l-3230 , ramp tester ifr-6000 , torque screw driver a402 (0.5- 2.5 nm) , carbon monooxide meter s/n- 211222325 , combination set , combination set 0-360 degree , compass landing (sirs/189/188) , d t i digital gauge 0-10 mm , d t i gauge 0-10 mm , depth gauge 0-150 mm , digital multimeter metravi 19 , digital protactor 0-90 degree , feeler gauge , feeler gauge 0.03-1 mm , force gauge 0-200 lbf , force gauge digital , hi voltage cable tester , hole gauge , micrometer digital 0-25 mm , micrometer external 0-150 mm , micrometer inside 0-1mm , micrometer inside 0-25 mm , pressure gauge 200 psi , pressure gauge , pressure gauge , pressure gauge 0-1000 psi , pressure gauge 0-150 psi , pressure gauge 0-150 psi , pressure gauge 0-250 psi , pressure gauge 0-500 psi , pressure gauge 0-6000 psi , pressure gauge 0-6000 psi , pressure gaugte 0 - 1000 psi- n2 kit , spirit level ts/94/2 (300 mm) , spring balance 0-50 kg , stop watch analog , straight edge , surface plate 18 inchx18 inch , telescopic gauge 12 to 54 mm , torqe screw driver 2-8 nm , torqe screw driver new capri , torque wrench , torque wrench , torque wrench 20-100 lb-ft , torque wrench 2-14 nm , torque wrench 5.6 23.7 nm , torque wrench 5-35 nm , torque wrench 5-35 nm , type pressure gauge digitel 150 psi , tyre pressure gauge 0-12 kg , tyre pressure gauge 0-200psi , pressure gauge 0-250 psi , pressure gauge 17.5 kg (spark plug tester) , volt meter , digital thermohygrometer , digital weighing balance , digital thermohygrometer , air compressor capacity 50 liter , air compressor capacity 50 liter , air compressor capacity 30 liter , air compressor capacity 30 liter , lifting beam (engine sling) , mobile crane with 10 mm wire rope , chain pully with mono rail , chain pully with mono rail , chain pully with mono rail , chain sling 4 leg 8 mm link dia , mobile crane with 12 mm link chain

Sediment Corer Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors