Latest seed coating machine Tenders | Government seed coating machine Tenders

CTN :45696125

13 Jul, 2026 NA

Palacode - Tamil Nadu

Tender For supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using driving and dr

CTN :45475095

30 Jun, 2026 NA

Karur - Tamil Nadu

Tender For corrigendum : supply of cnc turning centre - supply of cnc turning centre ( for specification refer nit document), capacity: 1. chuck dia. max - 169 mm 2. max. turning diameter - 200mm 3. max.turning length - 262 mm 4. admit between centers - 345 mmspindle: 1.spindle nose - flat (dia: 140) type 2. hole through spindle - 53mm 3. spindle speed - 4500rpm 4. spindle motor power - 5.5 / 7.5kw 5. spindle nose - flat (dia: 140)feed: 1.inclination of carriage - 30 to horizontal plane (deg) 2. cross travel x - axis - 105mm 3. longitudinal travel z - axis - 320mm 4. rapid traverse (x/z) - axes - 20/30 m/min turret: 1. no. of stations - 8 nos 2. tool shank size - 20*20 mm 3.maximum boring bar diameter - 32mm 4. turret indexing - hydralic type 5. turret indexing time - 0.8 to 1 sectail stock : 1. quill diameter - 65mm 2. quill stroke - 80mm 3. quill taper - mt 4 typecontroller: 1. controller machine size: 1. front x side x height - 2275 x 1640 x 1620 mm 2. weight - 2300kg

CTN :45617293

04 Jul, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For cnc dead centre extended length mt4 with draw- off nut(m36x1.5) ; total length: 184mm (min. ) , tail stock dead centre for cnc turning centre/lathe with draw-off nut as per din 807 standard. size: , steady supporting spherical roller, to suit in" smw autoblok" make self centering steady rest model , steady supporting cylinderical roller to suit in" smw autoblok" make self centering steady rest model

Corporations And Associations And Others

CTN :45600817

30 Jun, 2026 NA

Bengaluru - Karnataka

Tender For e-tenders for the supply, installation, testing & commissioning of seed treater, comprising of seed coating machine, seed dryer, automatic weighing and filling machine with necessary conveyors and stitching machine with accessories to the karnataka state seeds corporation ltd

corporations/Associations/Others

CTN :45583007

23 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For auction sale of radial drilling prtb,grinder pedastal,cnc h. m/cg. centre,roundness tester,cnc inv.hel.gr.testr,drilling m/c 4 heads,circular cold saw,lathe turret,grinder surface,lathe copying,air compressor,lathe capstan,grinder drill point,drilling bench,impact tester,hack saw,furnace electrical,press mounting,polishing m/c super,grinder t&c,radial drilling m/c,milling m/c bed type,welding arc,grinder centreless,de-minerlsng. plant,conveyor painting,hardening plant,cnc v. m/cg. centre,cnc v. m/cg.centre,grinder pedestal,cnc turning centre,telephone exchange,cnc 3d mesrg/marking,cnc co-ord measurg,cnc co-0rd measurg,spm-drilling.,cnc plano-miller,h.t. panel,boring & milling,cnc t & c grinder,crane eot

CTN :45588756

07 Jul, 2026 NA

Jamalpur - Bihar

Tender For supply of dead centre mt-6 standard material for axle turning lathe(atl) machine as per is 2289:1976. make- turnmax/tooltech/trumax/stribeck or similar. [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45324968

20 Jun, 2026 27.50 Lacs

Mandsaur - Madhya Pradesh

Tender For corrigendum : tender for supply, installation and commissioning of seed processing equipment. (second call) - seed grader, specific gravity seperator, seed coating machine, packaging and sealing machine, seed dryer

CTN :43015368

17 Jun, 2026 NA

Parganas - West Bengal

Tender For bid to ras supply of cnc turning centre with c axis, qty - 01 no

CTN :45543053

04 Jul, 2026 NA

Kamrup - Assam

Tender For supply of cnc turning centre (fanuc controller) & (siemens controller)

CTN :45404122

19 Jun, 2026 NA

Palacode - Tamil Nadu

Tender For corrigendum : supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using

Seed Coating Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Corporations And Associations And Others

corporations/Associations/Others

State Government