Latest seed processor Tenders | Government seed processor Tenders

CTN :45565907

23 Jun, 2026 NA

Vapi - Gujarat

Tender For supplying of materials and supplying and spreading of materials at various places of vapi municipal area. annual rate 2026-2027 - supplying of yellow earth, garden soil at site as directed., supplying of hard murram at site as directed., supplying of coarse clean sharp sand at site as directed., supplying of crushed stone aggregates, chippings etc. of disintegrated pieces, eletatrious and organic matter (for bitumen surface dressing etc.) and grading as per i.r.c.code., (i)10 mm to 40 mm size m/c metal, (ii)6 mm to 10 mm size grit., (iii) 40 mm to 90 mm size metal, (iv)9 thick rubble, supplying bricks., supplying of granular sub base by providing coarse graded material, mixing by mix in place method with rotavator at omc, with grading material of 53 mm to 26.5 mm size @35 percent,26.5mm to 4.75 mm @ 45 percent and 2.36mm below @ 20 percent at site as directed., providing wet mix base course maximum 200 mm thick using machine crushed b.t. chips as per required gradation mixing with required optimum quantity of water conveying the mix to site of work, including cost of materials labour plant and equipment etc complete, construction of granular sub-base by providing coarse graded material(metal), spreading in uniform layer on prepared surface mixing by mix in place method with rotavator at omc, and compacting with vibratory roller to achieve the desired density, etc, complete as directed by engineer in charge., providing and laying wet mix base course maximum 150 mm thick using machine crushed b.t. chips as per required gradation mixing with required optimum quantity of water conveying the mix to site of work, spreading into grade and camber with mechanical paver and consolidation with vibratory road roller including cost of material labour plant and equipment etc complete as directed by engineer in charge., supplying and spreading of following materials at site as directed by engineer in charge including rolling and consolidation with vibratory roller as directed by enigineer in charge., (i)10 mm to 40 mm size m/c metal, (ii)6 mm to 10 mm size grit., (iii)40 mm to 90 mm size metal, (iv)9 thick rubble, supplying and spreading hard murram including rolling and consolidation with vibratory roller as directed by enigineer in charge., note:- all rate are required compulsory

CTN :45501340

16 Jun, 2026 1.80 Lacs

Tonk - Rajasthan

Tender For मोबाईल क्लीनिंग ग्रेडिंग सोटिंग मशीन (2 tph) को ठेके पर संचालन हेतु - for operation of mobile cleaning grading sotting machine (2 tph) on contract.

CTN :45503564

16 Jun, 2026 2.50 Lacs

Tonk - Rajasthan

Tender For मोबाईल किलिनिग ग्रेडिंग व्यवस्था ठेका -operating work of mobile cleaning, grading and sorting machine located in the main market complex

CTN :45520793

22 Jun, 2026 NA

Leh - Jammu And Kashmir

Tender For 8ch cell grading machine battery tester

CTN :45501287

19 Jun, 2026 4.03 Lacs

Jhunjhunu - Rajasthan

Tender For मोबाईल क्लीनिंग ग्रेडिंग मशीन को ठेके पर देने एवं सब्जी मण्डी व अनाज मण्डी यार्ड में निर्मित कैंटीनों (कियोस्कों)को मासिक किराये पर देने हेतु - for outsourcing the mobile cleaning and grading machine and for renting out the canteens (kiosks) constructed in the vegetable market and grain market yards on a monthly rental basis.

State Government

CTN :45466278

18 Jun, 2026 NA

Nanded - Maharashtra

Tender For supply installation commissioning and testing of fully automatic cleaning grading machine 2 tph

State Government

CTN :45442749

15 Jun, 2026 NA

Malkapur - Maharashtra

Tender For supply of 3 tph cleaning and grading machine - supply, installation, testing & commissioning complete seeds processing plant for fully automatic 3 tph finish goods output capacity cleaning & grading machine

State Government

CTN :45327032

15 Jun, 2026 NA

Nanded - Maharashtra

Tender For corrigendum : supply installation commissioning and testing of cleaning grading machine 2 tph

CTN :45386932

16 Jun, 2026 6.59 Crore

Gwalior - Madhya Pradesh

Tender For construction and development (civil work) for construction and demolition waste plant of 100 tpd as per boq of rfp/dpr supplying erection and commissioning of machines/equipment for construction and demolition (c and d) waste plant of 100 tpd 2nd cal - all kinds of soil, "excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers,, loose or soft soil, providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all w, cement concrete grade m-20 (nominal mix) with 20 mm maximum size of stone aggregate., "foundations, footings, bases of columns, etc. for mass concrete.", cement concrete grade m-20 (nominal mix) with 20 mm maximum size of stone aggregate., "columns, pillars, piers, abutments, posts and struts.", "reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 landings, balconies, shelves,, "lintels, beams, plinth beams, girders, bressumers and cantilevers.", "along external wall where the apron is not provided using chemical emulsion @ 7.5 liters / sqm o, "filling by available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exce, thermo-mechanically treated bars. (fe 500 d or more), "aluminum turbo ventilator fan, size: dia 600 mm market rate", "sky light market rate ", 80x1.25mm m.s. laths with 1.25 mm thick top cover., "providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to is: 1868 wit, cement mortar 1:6 (1 cement : 6 coarse sand), 1:6 (1 cement: 6 sand), two or more coats on new work, "structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoist, 0.80mm thick with zinc coating not less than 275gm/m , 0.80mm thick with zinc coating not less than 275gm/m , "35 mm thick including isi marked stainless steel butt hinges withnecessary screws.", 35 mm thick shutters, half brick masonry with of class designation 40 in foundation and plinth in.cement mortar 1:4 (1 cement : 4 coarse san, "providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) nano polished (glossy, providing and laying broken china mosaic flooring for terrace using 12mm to 20mm broken pieces of glazed tiles to be lai, providing and fixing m.s. grills of required pattern to wooden frames of window etc. with m.s. flats at required specin, "construction of embankment/sub grade/ earth shoulders, as per clause 305 & its sub-clauses, where required but with app, "construction of granular sub-base by providing coarse graded material (cbr>30), spreading in uniform layers with motor, "providing, laying, spreading and compacting graded stone aggregate to wet mix macadam including premixing the material, providing and applying primer coat with cationic bitumen emulsion (ss1 grade) on prepared surface of granular base inclu, @ 0.25 kg per sqm (normal bituminous surfaces), for grading ii( 50-75mm thickness ) bitumen content 3.4% (vg-30), "for grading ii ( 30-40 mm thickness ), bitumen content 5.4% (vg-30)", procurement of fully automatic c&d waste processing unit(100 tpd) with dry and wet process inculding feeding & crushin, procurement of table vibrator for paver making unit including table vibrator,colour mixer,colour pigment,tables,concre, procurement of fully automatic fly ash bricks machine (120 ton compress force) with fully sensor based controlled 7 nos, procrement of vehicles articulated front end wheel loader,4-wheel drive,1.4 cum bucket,hydrostatic drive,, procrement of vehicles/tipper truck blazo 28t tipper,9 speed,bogie suspension,11x20-16pr tyres,6.17rar ,nac,16 cum box,4, procurement of pneumatic breaker (quotation), electrification /internal wiring and electrification (market rate)