Seismic Station Tenders

Get complete information related to latest Seismic Station Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Seismic Station Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Seismic Station Tenders .

Filter

Loading....

Get Tender in Email

State Government

CTN :42813292

05 Dec, 2025 NA

Multi City - Telangana

Tender For corrigendum : tggenco-ytps(5x800mw)-supply of t and p items required for stage-i and chp of ytps. - ac/dc volts (40hz to 500hz):4.000v, 40.00v, 400.0v, 1000v; resistance (ohms): 400.0 ohm, 4.000 kohm, 40.00 kohm, 400.0 kohm, 4.000 mohm, 40.00 mohm; capacitance: 40.00nf, 400.0nf, 4.000 µf, 40.00 µf, 400.0 µf, 1000 µf; ac/dc current: 4.000a, 10.00aac/dc millivolts: 400.0mv; diodetest: 2.000v;ip rating: ip40safety: iec 61010-1, iec 61010-2-030 cat iii 600v, cat ii 1000v, pollution degree 2.temperature: 50-400°c, 0-50°c, -55 to 0°c.temperature: operating: 0°c to 40°c;storage: -30°c to 60°celectromagnetic environment: iec 61326-1:portableincluded accessories: test leads with caps, thermocouple, temperature probe, 2 aa batteries, user manual along with the required calibration certificates.gds 18v-400 cordless impact wrench;battery voltage: 18v; torque max: 400nm; no load speed: 0-3,400 rpm. make: boschfluke true rms ac/dc digital clamp meter with iflex probe and fluke connect modelno: 376digital multimeter, make: fluke, model: 17b+, specifications: ac/dc current 10 amps, ac/dc voltage 1000 voltsmegger, 1kvleakage current clampmeter ac, range (0-100a)portable hot air blowervacuum cleaner, dry, 1300w, 6.1kg, 230v, 50hzvibration meter, digital, model: ird 306analog phase sequence indicator, 100 to 500 v, 25 to 65 hzdigital earth resistance tester with resistivity test facility, earth resistance: 0.01 ohms-200 kohmsplier, nose, 6"/150 mmhammer, 4 lbcutting plier, 12"39 , gds 18v-400 cordless impact wrench; battery voltage: 18v; maximum torque: 400 nm; no load speed: 0-3,400 rpm. make: bosch. , fluke true rms ac/dc digital clamp meter with iflex probe and fluke connect, model no: 376, , digital multimeter, make: fluke, model: 17b+, specifications: ac/dc current 10 amps, ac/dc voltage 1000 volts, , megger, 1kv, , leakage current clamp meter ac, range (0-100a), , blower, portable hot air, , vacuum cleaner, dry, 1300w, 6.1kg, 230v, 50hz, , vibration meter, digital, model: ird 306, , analog phase sequence indicator, 100 to 500 v, 25 to 65 hz, , digital earth resistance tester with resistivity test facility, earth resistance: 0.01 ohms–200 kohms, , plier, nose, 6"/150 mm, , hammer, 4 lb, , cutting plier, 12", , tape, measuring; length: 3 m; material: steel, , tape, 5 meters measuring tape, , tape, 30 meters measuring tape, , hole punch set 22, 20, 18, 16, 14, 12, 10, 8, 6, 4 set of 10 nos (tiger make), , center punch, length: 125 mm, , drilling machine, rated power input: 800w, 240v, drilling diameter in concrete with hammer drill bits: 4-26 mm, , digital motor checker: emc-38, , transformer, auto; type: manual operated variable; input voltage: 240 vac; output voltage range: 0-270 v ac; special features: (dimmerstat) with continuously variable banana terminals, capacity: 20 amps; model: 20d-1p, , transformer, auto; type: manual operated variable; input voltage: 415 v ac; output voltage range: 0-470 v ac; phase: 3; special features: 50 hz; model: 15d-3p, , lux meter, digital, 0-50,000 lux with silicon photodiode sensor, lcd display, dc 9v battery, mandatory accessories, , tachometer, digital; speed range: 9999/99999 rpm; model: v, , digital micro ohm meter, model dmo-100d, , gun, laser, , specifications:, , laser convergence distance: 50" (127cm) ir range: -58 to 3992°f (-50 to 2200°c) emissivity: 0.10 to 1.00 adjustable, , max resolution: 0.1°f/°c, , field of view (distance to target): 50:1

State Government

CTN :42922367

04 Dec, 2025 NA

Ghaziabad - Uttar Pradesh

Tender For corrigendum : supply of point machine and variouse other items as per boq attached inspectioon rdso rites consignee - supply of point machine irs type 220 mm stroke clamp type as per irs s$-24/2002 (amendment 1) or latest.(inspection agency:- rdso), supply of q-series led ecr (universal type i.e.qecx-61), 4f/4b complete with plug board(base plate), connectors, retaining clips etc. and conforming to brs: 941a sts / e / relays / ac lit led signal / 09 - 2002, amdt.-1 or latest and rdso spec.no.irs: s - 34, s- 23 or latest, as applicable. the interlocking code for this unit shall be "abdhk". (inspection by rdso)., contactor unit (qbca1 type), 24 v dc, 2hf / 4b complete with plug board (base plate), connectors, retaining clips etc and conforming to brs- 943 and rdso specn. no. irs : s - 34, s- 23, s - 60 or latest, as applicable. th e interlocking code for this unit shall be "bcejk". (inspection by rdso)., q-series magnetically latched neutral line relay (ql1 type), 11f / 4b, 24v dc complete with plug board (base plate), connectors and retaining clips and con forming to brs-935a and rdso specn. no.irs : s - 34, s - 23 or latest, as applicable. the interlocking code for this unit shall be "abdeg.(inspection by rdso)., supply of basic material to construct unit maintenance free earth as per rdso specs. no. rdso/spn/197 ver. 1.0 or latest to achieve a resistance less than 1 ohm. it consist of following:(a) copper bonded steel electrode of minimum 3.0 meter long, minimum 17.0 mm dia with copper bonding thickness of minimum 250 microns and ul listed and marked = 1 no. (b) earth enhancement material supplied in sealed bags of minimum 10 kg = 3 nos. (c) copper strip of 150x25x6 mm, to terminate earth rod = 1 no. (d) copper strip of 300x25x6 mm (meeb) = 1 no. (e) copper strip of 150x25x6mm (seeb) = 1 no. (ii) supply of 35 sq. mm multi strand single core pvc insulated copper cable as per is: 694 for connecting main earth electrode to meeb in the equipment room in duplicate. (minimum 10 meter.) (iii) supply of 16 sq. mm multi strand single core pvc insulated copper cable as per is: 694 for connecting meeb to seeb and spd to meeb (minimum 10 meter.) (iv) supply of 10 sq. mm multi strand single core pvc insulated copper cable as per is: 694 for connecting various equipments to seeb (v) supply of copper lug sleeve for 3/16 cable.(inspection by consignee)., supply of master telephone with voice logging facility for electronic lc gate telephone system as per specification no: rdso/spn/tc-51/2011 revision 3.0 with amendment no. 1 or latest. (inspection by rites)., electronic lc gate slave telephone system with voice recorder as per rdso specification no. rdso/spn/ tc/51/2021 revision 1.0 (inspection agency:- consignee), supply of centralized power supply system 24 volts dc power pack with 7ah mf battery for electronic lc gate telephone system as per rdso spec:- no. rdso / spn / tc / 51 / 2011 (rev. 3.0) amdt - 1 or latest.(inspection agency:- consignee), supply of optical power meter, type-b, as per tec spec. gr / opm - 01 / 03 feb. 2005 or latest. (make & model khushicom-k280) or similar branded make. (inspection by consignee)., supply and testing of optical laser light source of make- jdsu model- ols-35 or similar branded make.(inspection agency:- rites), supply of optical laser torch of reputed make. (make & model-proskit mt-7530) or similar branded make. (inspection agency: - consignee), supply of automatic fusion splicer for single mode optical fibre cable, along with accessories as per tec spec. tec/gr/tx/osm 001/04/sep-12 or latest of make superior/fujikura or similar. consignee shall approve the supply only after successful demonstration at site. (inspection agency:- rites), supply of otdr suitable for 1310/1550nm fiber with resolution of 60 cm, dynamic range of 314/29 db with all accessories for working on single mode optical fiber as per tec spec. tec/gr/tx/otd 001/05/sep-19 or latest, of reputed make like yokogawa/zdsu/viavi or

Central Government/Public Sector

CTN :42889084

10 Dec, 2025 NA

Kadapa - Andhra Pradesh

Tender For supply of consumable items 4pin ir infrared flame detection sensor module , 4-wheel drive robot smart car chassis kits , tip122 transistor + in4148 diode , capacitor (102 pf/3x33pf) +resistor(1kohm, 1w) , solar panel , 18 v (vmp)/50-100 w monocrystalline , charge controller , pwm 10 a/12 v solar controller , charge controller pwm 10 a/12 v solar controller , zvs inverter module , 5-12 v mini zvs induction heating module + coil , resonant capacitors (c_tx) , polypropylene 0.47-1 f/250 v , decoupling capacitors , 100 f electrolytic , decoupling capacitors , 1 f film each , copper wire for rx coil , enameled cu wire awg 18 (1.0 mm) in meter , resonant capacitor (c_rx) , 25 nf/250 v film capacitor , rectifier schottky bridge mbr3045 or 4x mbr2045 , filter capacitor , 1000 f/25 v electrolytic , display mcu arduino uno/ atmega board , lcd module , 16x2 hd44780 type lcd , dc fan 12 v brushless dc fan (0.1-0.3 a) , current sensor , acs712-058 (0-5 a) , 12 modular gang box , 1 module switch , camera sensor-rgb camera module/openmvcom , stepper motors-12v with gear boxes , transmitter and receiver coils -12v , aurdino (dfrobot) , flame sensor module , lm2596s dc-dc buck converter , 650nm 5v dc laser module (red) , vl53l1x time of flight distance sensor module , bmi160 6-axis accelerometer & gyroscope module , oled 0.96-inch 4 pin ipc 128x64 display module blue (ssd1306) , 5v 3a dc adapter having usb port , ai-thinker rd-03d 24g multi-target radar module , ps2 joystick module sensor , 1.25mm 4pin (pico blade compatible) to female , dupont (300mm) , battery 5v (rechargeable) , usb a type to micro usb b type power only cable 100cm , usb a type to micro usb b type power+data cable100cm , white led 1 w high bright , ds3231 rtc (i2c, 2ppm accuracy, battery backup) , sd card module + 16gb (spi, fat32) , mq-135 for air quality, (1 and0-1000ppm nh3/nox/alcohol) , mq-6 for lpg gas, (200-10000ppm, fast response) , mq-7 co gas, (10-500ppm, high sensitivity) , bmp280 pressure: 300-1100hpa, temp: -40 c to +85 c , mpx5010dp pressure: 0-10kpa, analog output , max6675 + thermocouple (temp: 0 c to +1024 , -type, spi) , 5 volt ac dc converter , 40-watt bulb as load , current sensor (sct-013) , rtc module -ds3231 , microsd card module , vibration/accelerator sensor , transistor (bc547 or npn) , pro-range 392.4 n-cm 50 rpm 12v planetary gear , dc motor pgm45775-99.5k , shafts/axles (steel rods, 3-5 mm) , gt2 timing pulley , springs (soft, 20-30mm) / shock absorbers , chassis/frame (aluminum/acrylic / wood) , screws, nuts, bolts, washers (m3/m4 assorted) , remote control module (rf 433mhz, serial communication) , icd display (16*2 lcd or 0.96 oled) , gp2y1010au0f dust sensor (5v analog output) , dc power supply / adapter: 12v , copper wire (25 m) , pp capacitor (0.1 f-1 f, 100v) , mosfet-irfz44n (2 no) , zvs driver board for tesla coil power supply board , induction heating module 12-30v , heatsink & cooling fan , filter capacitor 1000 f/50v , schottky diodes-1n581 (2nos) , filter capacitor 1000 f/25v , voltage regulator, lm7812 (12v) , l293d motor control sheild , battery cell 3.7v , mpu 9250 gyroscope sensor , lm2596s dc-dc buck converter , micro sd tf card memory shield module spi micro , sd adapter arduino , standard 5v 1a power supply with 5.5mm dc plug , irlml2502 , power bank (10000 mah)-5v,3a, , esp 32-devkit (esp-wroom-32),-520 kb sram, 4 , mb flash typical , motor driver modules-l298n , servo motors (sg90/mg90s) , lithium ion batteries 7.4 v 2s li-ion 2200 mah , dc motors(nominal voltage 6v) , raspberry pi camera module 3 , z120 usb speaker -logitech,-3 w output, plug-and- , play usb audio compatible with raspberry pi. , mic-generic usb mini mic , microsd card 32-64 gb , 65 mm plastic robot wheels with bo motors , fuse 12v,30-60a , pcb 20-60a , dc battery 12v,40-100a , mosfet 55-75v,60-120a , gate driver ic ir2110/ir2101/sg3525 , pwm controller ic sg3525, tl494 , dc bus capacitor 25v,2200-4700 microfarad , output filter capacitor 440v, 1-2.

CTN :42757869

05 Dec, 2025 NA

Sirohi - Rajasthan

Tender For supply of mechnical consumables and safety gears for observatory d d-- cut resistant tdm_c glove with nitrile coating white grey en or equivalent , techtion aerolite 5 cutpro cut resistance tdm_d glove with pu coatin en 388 2016 4542d or equivalent , nonvented helmet sweat band pinlock assembled harness yellow is 2925 1984 , fusion text ratchet helmet white or equivalent , corded disposable ear plug with cotton thread standard packing , honeywell ear plugs or equivalent , earmuff over the head earmuff abs cups and headband snr 23 db or equivalent , safety shoe 7 or 8 or 9 or 10 or 11 or equivalent , double polyamide safety rope and scaffolding hook , disposable, flat fold, ffp1s grey mask respirator with ear loops, complies to is9473 2002 rf01 or equivalent , 11kv hand gloves or equivalent , first aid box for 50 persons , jeans heavy duty protective hand gloves for multipurpose , safety goggles or equivalent , reflective jacket made of 120 gsm polyster net having 2 , worker body apron , head caps , shoe caps , ub102 with double polyamide rope scaffolding hook and energy absorber or equivalent , stanley fmht81509 fatmax motion sensor led head lamp with beam or equivalent , udyogi npu black_white _pu coated handgloves pack_5_1 or equivalent , udyogi ud71 grey_dark safety spectacle_1 or equivalent , udyogi gw250 safety goggle for welding and gas cutting_1 or equivalent , midas techtion spiro hfm 702 half face mask reusable silicone _1 or equivalent , udyogi fc58 faceshield with b10r headgear_ 1 or equivalent , udyogi baricading tape 3_1 or equivalent , rain coat , taparia allen key set brown finish akm-9 or equivalent , allen key sets inch type brown or equivalent , freemans measuring tape 3 meter or equivalent , ozar steel rule flexible 36_1 mtr or equivalent , taparia wire stripping plier ws 08 or equivalent , taparia cantilever tool box five compartment or equivalent , ozar ) /bid number: gem/2025/b/6892858 * /dated: 14-11-2025 & & / bid document1 / 370-300mm digital varnier caliper or equivalent , ozar 75-100 mm ip54 digital outside micrometer or equivalent , wire brush , feeler gauge 8 blades 0. 05-0. 50 ozar or equivalent , bosch gsb 600 re kit impact drills or equivalent , bosch gsb 185-li kit cordless drill driver or equivalent , bosch gws 750-100 small angle grinder or equivalent , bosch gbl 650watt air blower or equivalent , bosch glm 30-23 distance measuring unit or equivalent , bosch glm 50-23 g 50m range laser distance meter with colour backlit display or equivalent , bosch glm 100-25 c 100m range laser distance meter with colour backlit display or equivalent , bosch aquatak 130 bar 1700w electric high pressure washer or equivalent , bosch gsh 5 hx demolition hammer reduced contact pressure and long hammer tube or equivalent , ozar 87-100mm digital three point internal micrometer or equivalent , bosch 2607002790 all in one metal hand tool kit blue 108_pieces or equivalent , stanley_1_84_519_12 in 1 multi tool or equivalent , ozar pipe wrench 18 _ 1 or equivalent , ozar bench vice 150mm_6 swivel base _1 or equivalent , stanley 0_90_949 10 inch adjustable wrench - 1 or equivalent , esab welding holders handicool holder hc 600 or equivalent , esab xpert 3. 15x450mm e_7018 pack of 4 or equivalent , bosch ghg 180 heat gun - 1 or equivalent , bosch accessory assortment 34 pcs x_line iiw or equivalent , bosch gdc 140 diamond tile cutter _1 or equivalent , bosch gbg 35_15 bt grinders _1 or equivalent , black and decker 3 point 6v lithium ion screwdriver with 27 acc_ 1 or equivalent , bosch gbl 18v_120 solo cordless blower _1 or equivalent , bosch circular saw blade 110x1. 8_1. 1x20mm 30t_ 1 , bosch 5 inch cutting wheel _2608620676 _1 or equivalent

Loading, Please wait...

Seismic Station Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector