Latest self tapping screws Tenders | Government self tapping screws Tenders

CTN :45707583

11 Jul, 2026 NA

Ferozepur - Punjab

Tender For material and labour for construction of view cutting fence (2200 mtr) in ferozepur - site clearance complete all as specified and as directed. , excavating in trenches, not exceeding 1.5 m wide or not exceeding 10 sqm on plan and not exceeding 1.5 m in depth for foundation etc and getting out in soft/loose soil complete all as specified & directed., , excavating in post holes each n. exc. 0.5 cum and getting out in soft lloose soil, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exc. 25 cm complete all as specified., , material and labour for providing cement concrete in foundations 1:4:8 type d2 (using 40mm graded stone aggregate) filling and mass concrete complete all as specified & directed, , material only for brick work with bricks class designation 75, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed., , material and labour for providing cement concrete 1:2:4 type b1 using 20mm graded aggregate as in copping including weathering, slightly rounded or chamfered angles and necessary formwork complete all as specified and as directed, , material only for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and as directed., , supply and fix rolled mild steel fe-410 (grade e-250a) angle or tee section as in post, cut to length and bend to shape as directed, fixed independetly without connecting plate etc, including provision of 05 to 06 nos gaps/outs/holes in each post for providing/laying ppgi sheet and one coat of red oxide zinc chrome primer after preparation of new steel surfaces complete all as specified and as directed., , supply and fix rolled mild steel fe-410-w (grade e-250) quality a framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work complete all as specified and as directed., , supply and fix of pre-painting galvalume sheets having pitch 190mm, depth 29mm and not less than 0.50mm thickness having tensile strength of 550 mpa (galvalume base-ppgl trapezoidal profile sheets) fixed with self tapping screws of size 75/100mm and aluminium washer of suitable size in view cutting complete all as specified and as directed.

CTN :45738383

10 Jul, 2026 NA

Leh - Jammu And Kashmir

Tender For supply of plywood 10 mm , scoketing 2 by 2 10 feet , self tapping screws 3 inch and 1 point 5 inch , chinese serews 1 inch or 2 inch and 3 inch , nail 17 and 18 no , nail 3 inch , paint white , mattress , smart led tv 43 inch

CTN :45513465

30 Jun, 2026 9.44 Lacs

Imphal - Manipur

Tender For bid to ras bid to ras portland pozzolana cement , coarse sand , coarse aggregate , bricks sub , self tapping screws , ms square , hdpe sand , plywood commercial , app water , ceiling fan , synthetic enamel paint , pvc sheathed , thinner , distemper oil , painting brush 100mm , painting brush 75mm , pvc elbow 110mm , pvc elbow 75mm , pvc socket 110mm , ppr socket 20mm , ppr socket 25mm , ppr tee 25mm , ppr reducer , wooden scatling , nails 1 inch , hinges for , aldrop comp , ppgi sheet , self tapping screw , mild steel round , change over switch , pvc insulated , four layer hdpe , led tube , led bulb , ppr pipe , ppr elbow 25mm , ppr elbow 20mm , male threated socket , female threated socket , binding wire , non skid , metal cutter disc , metal cutting disc , welding rod , mild steel , acrylic sheet , male threated elbow , female threated elbow , pvc nahani trap , plastic tarpaulin , pvc waste , hand gloves

CTN :45543669

30 Jun, 2026 NA

Sonitpur - Assam

Tender For corrigendum : supply of jaq79080a,reverse clutch plate assy , jat79112b,pin for clutch link , jat79107,eye bolt for pressure plate , jat79096a,driving pin , jaq79079a,forward clutch plate assy , jat79113,set screw , jat89209,clamping plate for clutch , jat79250,collar on clutch shaft , jat79106 b,pin for clutch casing , jat79111,clutch link , jat79108b,fulcrum , jat79084 a,clutch ball liver , jat79241 b,bush , jat79239a,locking wire for clutch slide nut , jat79240,thrust bearing , jat79078,stud for clamping plate , jat79076,lock nut for clutch slide , jat79100,set screw , 57911,clutch pressure and spring assy , r450,rocker stud , r436a,locking washer , jat77902,clutch operating die , jat78169,pin for die , jat89412 2,lubricator with wick , jat89407,lubricator bracket lh , jat89406,lubricator bracket rh , jat89408,pipe clip on dust guard , jat89409,lubricator pipe for final drive , jat89411,brass tap 1 by 4 inch bsp , jaq77568c,top support bracket , jaq77572c,hand brake spindle bracket , jaq89167,foot brake pedal , jat89599,clamping pin , jaq77542a,foot brake lever top half , r12230063,foot pedal lever , jat77580, return spring for foot brake lever , jat77567e bearing nut for adjusting bolt , jat77577 spring for adjusting screw , jaq77558d,bottom foot brake lever , r12230062,lh brake shaft bracket with nuts, bolts and spring washer , jat77562e,pin with split pin , jat89600,fulcrum pin with slotted nut and split pin , r14230073,fulcrum pin with slotted nut and split pin , r13230072,foot brake lever for brake shaft pin , jaq77543a,foot brake lever on brake shaft , jaq78011 11,key for foot brake lever , jaf78416e 15a,rh brake shaft bracket 2 halves with nut and bolt and spring washer , jat77566,adjusting bolt , jaq77555b,double lever rh side , jaq77544a,double lever lh side , jaq78011 12,key for double brake lever , jat89606,bottom brake dowell , jat77578,hand brake spindle coller with split pin , jah89165,hand brake lever , jat77579a,hand brake trunion nut , jaq77569b,bottom guide plate , jafh77576b,brake strap complete , jah77583a,brake strap with lug , jaq89166a,set of brake lining , jaq89166a 1,lining 488 mm long , jaq89166a 2,lining 356 mm long , jaq89166a 3,lining 412 mm long , jat77589,supporting spring for strap , jaq89548,stud for brake strap screwed with brake shaft nuts and plain washers , jat77557d,pin for links foot brake lever , jaq78016 5,connector 1 by 8 inch , jat77582,pipe , jat77581,pipe , jaq78016 4,plate adopter for grease nipple , r14230116,link for simpson , r14230117,pin for simpson , 57712b,exhaust pipe , jat89597,u bolt for front support lower , jat89596,u bolt for front support upper , jat89048,clamp wedge for front support , jat89015,spacer , jat79161a,grub screw m12x1.25 , r347 2,head cover stud , r348,head cover nut , r14,felt washer , jat 89395,locking screw for front axle , r13140009,front roll bush grub screw cm6x20lg , jaq79165a,key , jat89017,locking pin , r13140003,bush for rear roll , r150,rear lamp bracket rh , jat89621,distance washer , 57658,loom panel to starter and dynamo , jaq78023,front lamp rh , jaq78024,head light assy lh , jah78439,lamp with //bid details 2 / 105 bulb 12v , jaf695358,instrument cluster , r10310108,instrument cluster , jat78029,horn 12v , r77 3,single cable clip , r77 2,multi cable clip , 57740,cable14 012 red for lh tail lamp , 57740,cable 14 012 black for rh tail lamp , 542492,fuse 10a blade fuse 10a

corporations/Associations/Others

CTN :45659875

22 Jul, 2026 3.50 Lacs

Ajmer - Rajasthan

Tender For tender for supply of spare parts of tata bs4 and bs6 buses at rsrtc ajmer depot workshop - withdrawl plate tata bs iv, clutch lock huk type tata 1613, clutch fork patti assy tata 1613, clutch cone tata 1613, clutch fork setting bolt with pvc bush bs6, hose pipe clip ½", hose pipe clip 1", hose pipe clip 1 ¼", hose pipe clip ½" steel, hose pipe clip 1" steel, hose pipe clip 30/35 mm steel, hose pipe clip 40 mm steel, hose pipe clip 50 mm steel, hose clip tb-42, hose clip tb-44, hose clip tb-46, hose clip tb-48, hose clip tb-50, hose clip tb-54, hose clip tb-60, hose clip tb-84, front/rear spring center bolt with nut 10", rear spring center bolt with nut 12" tata 1613, lock bolt for shakle pin 1½ x 2¾, p.s. nut ½ bsf, p.s. nut ½ bsf nylon, p.s.bolt ½ bsf 1¾", rear hub lock bolt no.13, self stud with nut, turbo stud with nut, air tank drain valve nut, front wheel bolt tata 1613, rear wheel bolt tata 1613, wheel nut tata 1613, axle plate bolt tata m8x1.25x20, bolt 8 x 1.5 x 32, bolt half thread m8x50, bolt half thread m8x75, nut 8 x 1.5, bolt m10x1.5x30, bolt m10x1.5x45, bolt m10x1.5x50, cylencer bolt m10x1.5x125, nylon nut m10x1.5, bolt m12x1.5x45, bolt m12x1.5x50, nut m12x1.5, bolt m14x1.5x45, nylon nut m14x1.5, bolt m16x2x70, nylon nut m16x2, wedge screw tata with nut, water pump stud with nut 13 no tata bs4 (4" long), nut 13 no (flange / without flange), chamber nut 1613, axcelator rod end tata small type, axcelator rod end tata big type, axcelerator cable tata bs 3rd, kilometer gear set pvc set of 2 pcs, accelerator spring tata bs 3rd, battery terminal +ve / -ve, dimmer switch, electronic flasher 24 v, fuse 10 amp, fuse 15 amp, fuse 20 amp, fuse 30 amp, fuse 40 amp, fuse 400 amp, head light holder 3 pin type, head light holder of h-11 bulb, back light holder bs6, head light switch, wire 4 mm (1 roll=25 meter), wire 6 mm (1 roll=25 meter), wire 8 mm (1 roll=25 meter), v.c tape roll, push pull switch, patti holder, r.l.wire, starter push button n/m, toggle switch, t.t. horn assy 24 v, brake linner spring tata big, brake linner spring tata small, thurst washer front tata, front hub check nut tata 1613, front hub distance piece tata 1613, rear hub lock washer tata, rear hub check nut tata 1613, rear hub distance piece tata 1613, front hub shim tata, rear hub shim tata, front hub cotter pin tata, front derlin bush (brake cam bush 31 no.), fulcrum end spring, rear derlin bush ( brake cam bush 32 no.), roller for brake cam, brake linner spring small tata 1613, brake linner spring big tata 1613, brake cam lock tata 1613, brake cam shim tata 1613, cmc assy 29066421, csc assy 29066722, kit major 29967275, kit major 29967053, kit 29967221, kit29967320, cmc assy 29067016, csc assy 29066553, cmc kit 29967278, brake lining rivit alluminium (set of 80 pcs), brake linner front tata 1613 std (4 pcs with rivets), brake linner front tata 1613 1st (4 pcs with rivets), brake linner front tata 1613 2nd oversize (4 pcs with rivets), brake linner rear tata 1613 std (4 pcs with rivets), brake linner rear tata 1613 1stoversize (4 pcs with rivets), brake linner rear tata 1613 2nd oversize (4 pcs with rivets), brake linner front / rear tata 1618 bs-6 std (4 pcs with rivets), brake linner front/ rear tata 1618 bs-6 1st oversize (4 pcs with rivets), fan belt bs3 tata 1325, fan belt 8pk 1260, fan belt tata bs4 2525231463313 (aux13-1060), fan v belt tata bs4 2525 2314 6316 om600, air comp fan belt pulley bs4 without brg 6203, power steering filter plastic lock type, fuel filter fine big with ring tata 1613, b.l. bulb 24v dcsf, r.l. bulb 24v bs-6 (double point & d. filament ), fog lamp bulb 24v, head light bulb helogen 24v 43t 100/90, head light bulb helogen 24v 43t 75/70, head light bulb helogen 24v 45t 100/90, head light bulb helogen 24v 45t 75/70, head light bulb yellow 24v, meter bulb 24v, r.l. bulb 24v 2441, bulb fix type t-10, head light bulb h-1 bs-6, head light bulb h-11 bs-6, gear lever end assy l.h., gear lever end assy r.h., gear lever bracket

Central Government/Public Sector

CTN :45616353

03 Jul, 2026 NA

Erode - Tamil Nadu

Tender For supply of set of brake rigging pins consisting of 12 items material mn steel to is: 276-2000, gr-i (old spec. irs r65/78) (1) lever fulcrum pin to drg.no 01-4-19-41 alt-14, 8 nos/set (2) hanger lever pin to drg no 01-4-19-42 alt16, 8 nos/set. (3) equaliser pin to drg.no 01-4-19-40 alt-15, 16 nos/set (4) trunion to drg no 01-4-19-23 alt-9, 8 nos/set (5) friction arm pin to drg.no 01-4-19-46 alt-10, 8 nos/set. (6) lever pin to drg no 01-4-19-47 alt-8, 8 nos/set. (7) slack adjuster pin to drg no 01-4-19-52 alt- 12, 16 nos/set. (8) brake cylinder pin to drg. no 01-4- 19- 53 alt-11, 8 nos/set. (9) equaliser pin to drg. no 01-3-19-43 alt-10, 8 nos/set (10) clevis pin to drg. no 01-4-19-45 alt- 13, 16 nos/set. (11) hanger pin to drg. no 01-4-19-48 alt-6, 8 nos/set (12) hanger pin to drg. no 01-4-19-49 alt- 5, 8 nos/set [ warranty period: 30 months after the date of delivery ] ]

Central Government And Public Sector

CTN :45577910

08 Jul, 2026 NA

Kaiga - Karnataka

Tender For supply of 1. cylinder liner for dlw 251 engine, dlw part no- 10124603 , 2. piston pin for dlw 251 engine, dlw part no- 10230580 , 3. piston pin sleeve for dlw 251 engine, dlw part no-10230385 , 4. snap ring, piston pin retaining for dlw 251 engine, dlw part no-15345129 , 5. bolt spl. connecting rod to cap for dlw 251 engine, dlw part no- 10140724 , 6. valve lever lock guide for dlw 251 engine, dlw part no-10210714 , 7. assy. nylon gear, gov. drive for dlw 251 engine, dlw part no-10051624 , 8. gear governor drive, camshaft drive for dlw 251 engine, dlw part no- 10241620 , 9. gear pinion for dlw 251 engine, dlw part no-10243719 , 10. key, pinion to drive gear, 5-16 inch x 5- 16x1 inch long for dlw 251 engine, dlw part no-15312185 , 11. lever eccentric adjustment for dlw 251 engine, dlw part no-10140300 , 12. eccentric with pin for dlw 251 engine, dlw part no-10051193 , 13. fuel pump cross head lifter for dlw 251 engine, dlw part no-10142745 , 14. fuel cam roller pin for dlw 251 engine, dlw part no-10216881 , 15. fulcrum pin for f.p. lifter for dlw 251 engine, dlw part no-10216959 , 16. air and exhaust push rod lifter for dlw 251 engine, dlw part no-10142757 , 17. cam roller pin, air and exhaust for dlw 251 engine, dlw part no-10216870 , 18. fulcrum pin for push rod lifter for dlw 251 engine, dlw part no-10216947 , 19. fuel pump support with cross head and lifter for dlw 251 engine, dlw part no-10050723 , 20. push rod lifter seat for dlw 251 engine, dlw part no- 10211147 , 21. spring seat for dlw 251 engine, dlw part no-10210520 , 22. spring seat lock for dlw 251 engine, dlw part no-10210477 , 23. air and exhaust valve guide for dlw 251 engine, dlw part no-10210639 , 24. valve lever assy for dlw 251 engine, dlw part no-10040079 , 25. yoke, air and exhaust valve for dlw 251 engine, dlw part no-10140323 , 26. cam roller bushing for dlw 251 engine, dlw part no-10216893 , 27. fixed bushing cross head lifter fulcrum pin for dlw 251 engine, dlw part no-10150845 , 28. bushing at fulcrum pin push rod lifter for dlw 251 engine, dlw part no-10150109 , 29. cam roller, push rod lifter for dlw 251 engine, dlw part no-10216844 , 30. retainer ring for cam roller pin for dlw 251 engine, dlw part no-15345087

CTN :45439902

17 Jun, 2026 NA

Doda - Jammu And Kashmir

Tender For bid to ras supply of coolant container , shock absorber bush , calliper pad rear , wheel bearing inner , wheel bearing outer , brake pneumatic pipe line 22mm union , benjo washer , black screw four head , self tapping screws hex head 1 inch , self tapping screws hex head 1.5 inch , self tapping screws hex head 2 inch , battery pole making die set , solonoied switch bush , armature bush , reverse light switch , s r 40 regulator 24v

Central Government/Public Sector

CTN :45543186

23 Jun, 2026 NA

Bardhaman - West Bengal

Tender For hearth drive assy, mechanism, pn: 2-15 (4203084461) - 022 , lever fulcrum pin&pawl assy , arm assy, spring loaded, dwn: 05.02. 01/129d

Central Government/Public Sector

CTN :45487193

09 Jul, 2026 NA

Erode - Tamil Nadu

Tender For supply of jacks simplex lever operation type double acting 15 tonnes capacity. a)should be of double acting trip lowering ratchet type,b) foot lift 70mm, c)capacity of 15 tonnes,d) height 560mm when closed 890mm when lifted fully 330mm (raise),e) square head 75mm as side,f) base 280 x 160mm, g)pitch 15mm,h) jack should be of cast steel body socket lever with alloy steel heat treated poule forged steel necks with raised teeth ,heat treated fulcrum pin,i) easy and compact for convenient handling and transporting. material should be as per rdso specification of hydraulic track jack 15t cap.(non infringing) no.tm/sm/31 dt. 08.05.1996, second revision - july 2022 [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Self Tapping Screws Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector