Latest self priming pump Tenders | Government self priming pump Tenders

State Government

CTN :45596388

23 Jun, 2026 NA

Delhi - Delhi

Tender For supply, installation, testing and commissioning of electrical and mechanical equipments for shallow bore tube wells phatak bans,sawar khan, chatta mom gran, lal darwaza in matia mahal constituency ac-21. - s/o submersible pump set fitted with dynamically balanced ep impeller mounted on stainless steel shaft protection sleeve ep stage bowl of closed grained shorted type impeller. the pump will be directly coupled to required wet type induction motor of speed 2900 rpm suitable for operation on three phase ac, 415 volts ,50hz, 5 hp, model no j46, head-70 mtrs, discharge-200 lpm. make:bs/ksb/crompton/djb approved, supply of automatic lt panel board suitable for 415 volts, 3 phase, 50 hz, 4 wire system for operation of up to 15 hp submersible set, made out of not less than 2 mm thick crca for load bearing members and 1.6 mm for doors of panel, totally enclosed, dust and vermin proof, floor mounted type. the panel size 760 mmx 1360 mm x300 mm and having (1) 63 amp change over- 1 no (2) 63 a tpn mccb -1 no (3) amp meter 0-50 a- 1 no (4) voltmeter 1 no (5) amp & volt meter selector switches-1 set (6) auto-manual + light + control mcb tp 32 amp- 1nos each (7) ct -3nos (8) push button + on/off light 2 nos each (9) 5 kvar shunt capacitor- 1 no (10) aluminium bus bar size 25 mm x 6 mm - 1set (11) 15 hp star delta starter (a) 32 amp power contactor-3 nos (b) overload relay 14-23 a -1 no (c) star delta timer- 1 no ( d) qt timer -24 hours -1 no (e) motor protection relay 200 short circuit, earth fault, phase loss, unbalance, phase reversal, locked rotor protection make:-subtec/protech/ l&t/all djb approved make, s/o pvc insulated flat submersible cable with copper conductor having three core size 2.5 sq mm 1100 volts(100mtr per roll). make- gloster/universal/havells/grandlay/djb approved, s/o g.i pipe 40mm dia medium class with threaded externally on both end socketed 6mtr long. make- jindal/tata., s/o g.i tail piece 40mm dia 600mm long medium class with threaded externally on both end. make- tata/jindal, s/o gi socket 40 mm dia with threaded internally. make: jindal/tata/djb approved, s/o gi elbow with both end having thread, size- 40mm. make: jindal/tata/djb approved, s/o gi reducer having thread on boyh end, size: 50mm to 40mm. make: jindal/tata/djb approved, s/o gi union having thread on both end, size: 40mm. make: jindal/tata/djb approved, s/o ms clamp of 600mm long 12mm thick complete with nut & bolts and washers for holding 40 mm dia pipe i/c bending & shaping etc., supply of ms bore cover 6 mm thick suitable for 100 mm dia casing in 2 pieces complete with bolting arrangement angle iron frame and provision of 40 mm dia hole in the center., supply of pvc suction hose pipe 50 mm dia 30 mtr long.make-jyoti/isi, installation of submersible pump set with pipe and other accessories, connection of cable, installation of electric panel, grouting of electric panel digging and fixing the same with the help of cc and laying of gi pipe from bore to panel executing minor civil making electrical connection with cable as required size i/c watch and ward cartage, taking all safety measures all tools and tackles. testing and commissioning of all e&m equipment on no load and full load conditions as per standard and full satisfaction of engineer-in- charge. this is a turnkey job and it further includes any left out items which may be required during execution of work will be firm responsibility & no extra payment will be paid. - s/o submersible pump set fitted with dynamically balanced ep impeller mounted on stainless steel shaft protection sleeve ep stage bowl of closed grained shorted type impeller. the pump will be directly coupled to required wet type induction motor of speed 2900 rpm suitable for operation on three phase ac, 415 volts ,50hz, 5 hp, model no j46, head-70 mtrs, discharge-200 lpm. make:bs/ksb/crompton/djb approved, supply of automatic lt panel board suitable for 415 volts, 3 phase, 50 hz, 4 wire system for opera

State Government

CTN :45598068

24 Jun, 2026 NA

Delhi - Delhi

Tender For supply, installation, testing and commissioning of submersible pump set with enm equipment for 3 nos. newly - re-bored tube wells at g-946 sangam vihar, f-3 sangam vihar and g-833 near maya global public school under deoli constituency ac-47.

State Government

CTN :45598092

24 Jun, 2026 NA

Delhi - Delhi

Tender For supply, installation, testing and commissioning of submersible pump set with enm equipment for 3 nos. newly - re-bored tube wells at c-1010 near bhagar singh chowk sangam vihar, c-1256 nr. rotary club sangam vihar and c-44 tigri extension in deoli constituency ac-47.

State Government

CTN :45607060

25 Jun, 2026 4.44 Lacs

Gurgaon - Haryana

Tender For providing submersible pump set vertical 400 lpm 70 meter head with 10hp motor,horizontal submersible pump set 1650 lpm 50 meter head with 30 hp motor,submersible cable and aluminum service cable in village rozka meo and mbs bhadas

State Government

CTN :45597721

24 Jun, 2026 NA

Kolkata - West Bengal

Tender For withdrawing, lowering of submersible pump motor set for repairing of bottom adaptor at p.h. no.2, zone-1 of berachapa w/s scheme under emsd-i, p.h.e. dte dist.-24pgs(n).

corporations/Associations/Others

CTN :45590186

22 Jun, 2026 11.89 Lacs

Multi City - Telangana

Tender For drilling of 6.5 dia borewell, supply, delivery and erection of suitable submersible pump set with accessories at huda colony park ii in patanchervu circle-46, slp zone, cmc during the year 2025-26(item.4)(1st recall)

Central Government/Public Sector

CTN :45604121

25 Jun, 2026 NA

Madurai - Tamil Nadu

Tender For 5 hp bore well submersible pump. electrically driven 5hp 100mm dia. bore well submersible pump set as per is : 8034 with following technical specifications, suitable for 3 phase, 415v, 50hz, a c supply. 1) power rating -5hp / 3.7kw 2) total head range -143 - 45 mtr 3) discharge range 87 - 175 lpm 4) duty point -114 lpm @ 112 mtr 5) stage -25 6) pump size - 50 mm (2") make: texmo, aquatex, ksb, kirloskar and mbh [ warranty period: 12 months after the date of delivery ] ]

CTN :45396678

26 Jun, 2026 NA

Rourkela - Odisha

Tender For corrigendum : supply of submersible dewatering pump set, pump type: self priming motor coupled pump, , motor type: ac motor, single, phase , 230 v +/- 10%, 50hz, motor rating :1.8 kw, class of insulation: f class (motor coupled only), degree of protection: ip 55, speed in rpm: 2760, size (dia) of solids in liquid to be handled: 40 millimeter, suction pipe size (nominal): 40 millimeter, delivery pipe size (nominal):63 millimeter, pump shaft: stainless steel, impeller material bronze, discharge capacity in litres/second (lps): 11, total head: 12meter, impeller diameter: 40 millimeter, impeller key: yes, impeller nut: yes, mechanical seal, rotating element: yes, mechanical seal, stationary element: yes, non return valve housing: yes, warranty period: 2 year,make/brand: kirloskar, crompton, ksb or equivalent make. [ warranty period: 24 months after the date of delivery ] ]

CTN :45396679

26 Jun, 2026 NA

Rourkela - Odisha

Tender For corrigendum : supply of submersible dewatering pump set, pump type: self priming motor coupled pump, , motor type: ac motor, single, phase , 230 v +/-10%, 50hz, motor rating :1.8 kw, class of insulation: f class (motor coupled only), degree of protection: ip 55, speed in rpm: 2760, size (dia) of solids in liquid to be handled: 40 millimeter, suction pipe size (nominal): 40 millimeter, delivery pipe size (nominal):63 millimeter, pump shaft: stainless steel, impeller material bronze, discharge capacity in litres/second (lps): 11, total head: 12meter, impeller diameter: 40 millimeter, impeller key: yes, impeller nut: yes, mechanical seal, rotating element: yes, mechanical seal, stationary element: yes, non return valve housing: yes, warranty period: 2 year,make/brand:kirloskar, crompton, ksb or equivalent make. [ warranty period: 24 months after the dateof delivery ] ]

CTN :45443500

25 Jun, 2026 69

Anekal - Karnataka

Tender For corrigendum : procurement of pump motors and allied accessories for hennagara gram panchayat for the financial year 2026-27 - motor and pump 12.5hp 25 stage, motor and pump 5hp 50 stage , motor and pump7.5hp 56 stage, motor and pump 15hp 30 stage , motor and pump 20hp 40 stage, motor and pump 17.5 hp 36stage, motor and pump10hp 20 stage, motor and pump 25hp 40 stage pump, submersible cabel 4sq 3 core , submersible cabel 6sq 3 core , submersible cabel 10sq 3 core , starter 5hp - meco, starter 7.5hp - meco, starter 15hp - meco, starter 17.5hp - meco, starter 20hp - meco, panel board - iso certified, alluminium wires 6sq.mm - iso certified, alluminium wires 10sq.mm - iso certified, alluminium wires 12sq.mm - iso certified, alluminium wires 16sq.mm - iso certified, alluminium wires 20sq.mm - iso certified, gi pipe 2 inches class b , complete panel board items, gi clamp set bore cap, gi collar 2 inch - iso certified, sealent 100ml - iso certified, axcel blades- iso certified, gi bend 2 inch- iso certified, gi nipple feet 2 inch- iso certified, gi nipple 0.75 1feet - iso certified, gi nipple 0.75 2feet - iso certified, gi collar 0.75 inch- iso certified, gi elbow 0.75inch- iso certified, gi nipple feet 1 feet 0.5 inch- iso certified, gi nipple feet 2 feet 0.5 inch- iso certified, gi collar 0.5 inch- iso certified, gi elbow 0.5 inch- iso certified, gi 2 nrv- iso certified, solvent cement gum- iso certified, brass gate wall 2 inches- iso certified, brass gate wall 2.5 inches- iso certified, gi gate wall 2 inches- iso certified, gi gate wall 2.5 inches- iso certified, gi tap 0.5 inches- iso certified, gi tap 0.75 inches- iso certified, gi union 2 inches- iso certified, gi union 2.5 inches- iso certified, gi union 2 inches- iso certified, gi union 3 inches- iso certified, gi tee 0.5 inches- iso certified, gi tee 0.75 inches- iso certified, gi elbow 0.5 inches- iso certified, gi elbow 0.75 inches- iso certified, gi coller 0.75 inches- iso certified, gi coller 2 inches- iso certified, gi pipe 0.75 inches with thread- iso certified, gi thread end cap 0.5 inches- iso certified, hdpe pipe 1.5 inch 20 gauge - iso certified, hdpe pipe 1.25 inch 20 gauge- iso certified, end connection for hdpe- iso certified, motor for open well 1 hp, pump and motore 10hp 50 stage, pump motor 20hp 50 stage, motor 5hp 10stage pump, motor and pump 7.5hp 15stage, amphere meter, volatage meter, pump and motor 25hp 50satage

Self Priming Pump Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

State Government

corporations/Associations/Others

Central Government/Public Sector