Latest sensor repair Tenders | Government sensor repair Tenders

CTN :40062013

03 May, 2025 2.53 Crore

Karanjia - Odisha

Tender For procurement and installation of different instruments for instrumentation of earth dam and spillway in deo irrigation project for the year 2025. - supply of fiberglass reinforced plastic (frp) make universal enterprises an improved venturi plate conformed to is: 9108 for accurate measurement of water flowing through channels comprising of masonry construction provided with pre-fabricated glass fiber lining on both sides, a side chamber provided in one side masonry wall of the said flume on the upstream side, a pipe provided at the bottom of the chamber connecting the said chamber with the water flowing through the notch, a float means provided in the said chamber, enabling recording the rising or falling level of water in the said chamber such as a scale provided in the said chamber, moulded engraved gauge marking in lit/sec and also in centimeter including moulded and engraved discharge table, capacity marking, flow direction, m.s pipe stiffeners, hold fasts, sand treatment on the backside of plate but excluding gst as per the instruction of engineer-in-charge etc. complete, inside spillway foundation gallery - 15 lit./sec. v-notch, seepage drain - 90 lit./sec. v-notch, calibration marks:- supply of polymers composites improved calibration marks make universal enterprises with contact molding process, both side finish, m.s. strip embedded inside, engraved and molded marking for bands and figures covered with radium and covered with two coats of polyurethane for surface protection with marking in reduced levels, sill, fsl, frl, mwl but excluding gst as per the instruction of engineer-in-charge etc. complete, supply vw up-lift pressure meter provision for connected to das make : aimil ltd. uplift pressure meters are used for measuring and recording of uplift pressures acting in foundations of concrete/masonry dams. vibrating wire type uplift pressure meter : range: 0.2 mpa to 5.0 mpa./7ksc accuracy: 0.5 -1 % fs. temp limit: - 10 to 70 deg c. coil resistance: 140 - 160 ohm thermistor: ysi-44005 or equivalent. material: stainless steel cable: 1m, 4-core borehole for uplift pressure meter at foundation gallery (inside spillway) should be straight from foundation level and clear. proposed location : inside spillway foundation gallery in overflow section: 7 no. non overflow section: 2 no. purpose: uplift water pressure measurement. (but excluding gst), supply automatic seepage measuring system make : aimil ltd / sysgeo italy or equivalent vibrating wire water leakage measuring systems are used for measuring water leakage and flow in dam galleries by installing v notch weir coupled with vibrating wire sensor for remote monitoring of water leakage. sensor type: sensor : vibrating wire precision water level sensor range: 300mm resolution: 0.025%fs material : stainless steel excitation : sweep or pluck assembly: v.w. type sensors enclosed in an environmental proof fibre glass box. splicing kit & adhesive required accessories. proposed location : inside spillway foundation gallery: 1 no. toe drain: 1 no. (drainage outlet) purpose: seepage water measurement in liter per second (but excluding gst), supply data logger or data acquisition system aimil make dt85g with cem20 or ace s korea analog channels 16 analog input channels each channel is independent and supports: one isolated 3-wire or 4-wire input, or two isolated 2-wire inputs, or three common referenced 2-wire inputs. expansion requires optional cem20 sampling integrates over 50/60hz line period for accuracy and noise rejection maximum sample speed: 40hz effective resolution: 18 bits linearity: 0.01% common mode rejection: >90db line series mode rejection: >35db vibrating wire frequency range: 500 to 5khz coil resistance: 50 to 200 stimulation method: single pulse pluc digital channels 8 bi-directional channels input type: 8 logic level (max 20/30v) output type: 4 with open drain fet(max: 30v, 100ma) 4 with logic output alarms power supply , sim card will be in your scope. propo

Central Government/Public Sector

CTN :40042873

07 May, 2025 NA

Patna - Bihar

Tender For repairing and supply, installation, testing and commissioning of furnishing, electrical and fire alarms system works

Central Government/Public Sector

CTN :40018525

07 May, 2025 6.26 Lacs

Patna - Bihar

Tender For repairing and supply, installation, testing and commissioning of furnishing, electrical and fire alarms system works at utiitsl patna

Central Government/Public Sector

CTN :40026792

23 Apr, 2025 NA

Kota - Rajasthan

Tender For supply of display card of automatic fire detection and alarms system. spec: rdso/spn/217/ 2021 ver 3.0, str: siq 0211 ver 1.0. [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :39875638

21 Apr, 2025 2.07 Crore

Khorda - Odisha

Tender For corrigendum : providing of custom bid for services - deployment of motorcycle/ bike quick response team (qrt) for monitoring and surveillance of pipeline intrusion detection and warning system (pidws) alarms in mainline row of paradip and balasore jurisdiction under serpl para..

Central Government/Public Sector

CTN :39990161

24 Apr, 2025 NA

Kota - Rajasthan

Tender For supply of loop card of automatic fire detection and alarms system.

Central Government/Public Sector

CTN :39990163

24 Apr, 2025 NA

Kota - Rajasthan

Tender For supply of control module card of automatic fire detection and alarms system.

Central Government/Public Sector

CTN :39990948

24 Apr, 2025 NA

Kota - Rajasthan

Tender For supply of zone module card of automatic fire detection and alarms system.

Central Government/Public Sector

CTN :39932707

02 May, 2025 NA

Jodhpur - Rajasthan

Tender For supply of material and execution of indoor & outdoor work for provision of electronic interlocking-msdac based automatic block signalling system between marwar kori(excl.) to bhildi in connection with doubling of ln-smr-bldi section of jodhpur division of north western railway. the work involves provision of new electronic interlocking at malwara, raniwara, marwar ratanpur, jari, dhanera,ramsen,jenal stations & alteration in ei at odhava staion of north western railway & alteraion in ei at bhildi junction of western railway along with thirteen numbers of auto signalling huts . provision of msdac parallel with dc track circuit in yards & dual msdac in block section associated works like trenching & laying of signalling and telecom cables in pre-fabricated ducts/dwc/gi pipes, supply-installation of point machines, apparatus cases, electric lifting barrier gate, signals, track circuit equipment, earthing material, data loggers, eld, fuse alarms, fire alarms, passenger amenity telecom items etc.

Central Government/Public Sector

CTN :39934135

21 Apr, 2025 NA

Delhi - Delhi

Tender For supply of 2024-25 (ami no.sn 219) cytocentrfuge specifications 1. the equipment should b e bench top centrifuge for cytology specimens. 2. it should be capable of thin layer cell preparation for retrieving cells from various body fluids & preserving their morphology. 3. it should be capable of proc essing up to minimum 8 specimens at one time. 4. it should be resistant to fluid spillage and also close d rotor, chambers for elimination of aerosol. 5. inbuilt safety alarms during all stages of operation shou ld be available. 6. microprocessor based controls & programming for time and speed 7. voltage requir ement : 220v, 50hz. 8. rpm should be 200-2000 9. cell block preparation system should be present in the system. 10. should have digital display for speed and time. 11. time window displays the program med and remaining run time from 1-99 minutes. 12. essential accessories like 200 filter cards. cyctocli ps, reusable funnels (10) etc to be supplied with the system. 13. document supporting track record an d satisfactory performance in govt./ semi %u2013 govt./ psu. total installations should be more than 50, and minimum 5 performance certificates from verified from govt./ semi %u2013 govt./ psu institu tes. 14. equipment should be us %u2013 fda, european ce and bis /iso approved. 15. two year warr anty should be provided for all components. 16. year wise breakup of cmc charges (for all components ) for a period of 5 years after completion of warranty period should be mentioned as per the following requirement: a) preventive maintenance visits 4 times in a year. b) breakdown calls as and when requi red. c) maximum response time: 2 days. d) maximum downtime: 3 days. e) in case of downtime excee ding beyond 72 hours, similar make & model backup/standby equipment using same inventory as the main equipment should be provided. f) list of items that are not covered under cmc should be provide d with their rates & periodicity or schedule of replacement. anything not mentioned in the list has to b e supplied free ]

Sensor Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors