Latest sensors Tenders | Government sensors Tenders

CTN :41761965

16 Sep, 2025 NA

Palacode - Tamil Nadu

Tender For supply of equipment for electrical and electronics engineering department - supply of equipment for electrical and electronics engineering department:, plc with digital & analog i/o moduleinbuilt power supplyadditional voltage sources 12v,5v8 digital inputs with indication led s6 digital outputs with indication led s2 analog inputs with inbuilt ldr potentiometer2 analog outputs with inbuilt dc motor speed controlpower on/off indication led sinbuilt push button:3 inbuilt latch switch:2inbuilt toggle switch:2inbuilt buzzerusb port for programmingconnecting cableswooden enclosure, interfacing of discrete field devices with plc kitsequence of operation:develop ladder logic in plc to execute the following logical relation between the input and output field devices.y= a+b+c+dy= a.b.c.dy=(a+b).(c+d)y= (a.b)+(c.d)interface specifications:plc input interfacing push button(a)limit switch (b)reed switch (c )3wire inductive proximity sensor (d)plc output interfacing buzzer (y)wooden enclosure, plc based water level control systemsequence of operation:develop and execute ladder logic in plc to fill the empty tank with liquid when the start button is pressed. when liquid reaches the high level, turn off the pump motor and turn on the solenoid valve to drain the liquid from tank. when liquid reaches the low level, turn off the solenoid valve and turn on the pump motor for refilling. interface external pilot lamp with plc to indicate the operation of pump motor and solenoid valve.interface specifications:level sensors as input to the plcwater tap as output from the plcwater pump motor control using outputs of the plcwater tank with sump2levels sensor switchespumps for filling tanksolenoid valve to drain water.12v and 24v power supply unitssteel enclosure, plc based forward and reverse control of induction motor kit. sequence of operation:develop and execute ladder logic in plc to control three phase induction motor in forward and reverse direction of rotation. interface external pilot lamp with plc to indicate the direction of rotation. check the output by interfacing plc with three phase cage induction motor.interface specifications:3 phase main contactors.3 phase input, fusesstop, start forward, start reverseforward, reverse indication lamp.proper terminal for 3 hp cage motorsteel enclosure, plc based conveyor system with prewarning siren kit sequence of operation:develop and execute ladder logic in plc using an on delay timer to delay the start of a conveyor. while press the start button, activate the warning siren for pre-set time. after the pre-set time delay the warning siren turns stop button is pressed turns off the conveyor.interface specifications:conveyor setupplc input interface start, stop push switches.plc output interfacing siren output to give alarm.plc output interfacing conveyor belt with geared dc motor drivessteel enclosure, plc based counting of moving objects on a conveyor kit sequence of operation:develop and execute ladder logic in plc for counting the object moving in the conveyor. interface manual start and stop push button to operate the conveyor motor and proximity sensor detect the object. interface buzzer to give beep sound while sensor is detecting the product. when the pre-set value of count has reached turn off the conveyor automatically.plc based counting of moving objects on two conveyors kit. sequence of operation:a manufacturing plant is arranged with two feeder conveyors for transferring the objects into the plant. develop and execute ladder logic using math instruction in plc to get the total number of objects transferred by two conveyors into the plant. when the total object count has reached pre-set count value, turns on buzzer to give beep sound for 1 second and turns off the conveyors.interface specifications:conveyor setupplc input interfacing proximity sensor with each conveyor to sense the object.plc input interfacing start push switch and stop push switchesplc output buzzer output to give ala

CTN :41762154

19 Sep, 2025 NA

Villupuram - Tamil Nadu

Tender For purchase of lab equipments for eee department - 1030235440-plc and automation lab, interfacing of discrete field devices using plc (a) plc input interfacing push button (b) limit switch (c) reed switch (d) 3 wire inductive prosimity sensor plc output interfacing buzzer (y) closed wooden cabinet, plc based counting of moving objects on a conveyor (a) sloped converyor with shawl sheet metal model (b) plc input interfacing prosimity sensor to sense the shawl (c) plc input interfacing start, stop push switches and fwd/rev toggle switch (d) plc output buzzer output to give alaram (e) plc output interfacing conveyor belt with geared dc motor drive, plc based counting of moving objects on a conveyor (a) conveyor with 2 nos of shawl sheet metal model (b)plc input interfacing 2 nos inductive prosimity sensor to sense the shawl (c) plc input interfacing start, stop push switches and fwd/rev toggle switch (d) plc output 2nos of buzzer output to give alaram (e)plc output 2nos of conveyor belt with geared dc motor drive, plc based car parking control system (a)plc input interfacing one op to interrupter sensor entry gate and another one op to interrupter sensor exit gate (b)plc input interfacing 2 nos of limit switch (c) plc input interfacing 2 nos of pilot lamp, one for available and another one is full (d) plc output interfacing barrier gate of incoming and outgoing vehicle control with 2nos of dc motor (e)plc output 2nos of conveyor belt with geared dc motor drive (f) wooden closed cabinet, plc based fan control for energy conservation (a) plc input interfacing 2nos of photo electric proximity sensors entry hall and another one photo electric prosimity sensors exit hall (b) plc output interfacing 4nos of 24v dc fan (c) wooden closed cabinet, plc based illumination control system (a) plc input interfacing one potentiometer to use percentage reading (b) plc input interfacing one ldr to use illumination view (c) plc output interfacing 3 nos of led light setup- output to plc (d) real time interface (e) wooden closed cabinet, plc trainer kit (a)micro 850 controller with 14 digital inputs and 10 digital outputs and 4 analog inputs (b) 14 digital input switches and 10 digital outputs with led indiction (c) 4 analog inputss 0-10v variable (d) 24v operated, built-in power supply, additional 5v, 750ma power supply (e) 4 no contacts of the relays connected at outputs of the plc and a buzzer (f) computer connectivity to download the program using usb port with cable (g) professional programming software - component connect workbench (h) legend printed in the pcb (i) built in power supplies (j) closed wooden cabinet, 1030235340 - power electronics lab, construct and test the on / off control of lamb using solid state relay (a) 24v, 2a power supply for the power circuit (b) necessary dc power supplies for the control circuits, diac - triac lamp control circuit (a) variable ac power circuit using triac (b) diac circuit to trigger the triac in both half cycles (c) provision to vary the charging time of capacitor (changing the phase angel also) for the diac isolation transformer for 110v ac, lamp load, 1030235543 - control of electrical machines lab, wire and test the control and main circuit for dol starter with (a) 16a, 3 phase main contactor, 6a overload relay (b) start and stop push buttons, fuses and power wriring termination (c) control wiring termination (d) wooden casing, wire and test the control and main circuit for conveyor motor with detection of metal object stop the conveyor motor for 5 seconds (use the proximity sensor and timer) (a) conveyor setup (b) push switches for start and stop (c) 24v relay - 24v dc motor (d) 24v proximity sensor to sense the shawl (e) adjustable timer with time display (f) build in power supply closed wooden cabinet

Central Government / Public Sector

CTN :41795593

07 Oct, 2025 NA

Bangalore - Karnataka

Tender For multi purpose pressure sensors for stockings

CTN :41816541

29 Sep, 2025 NA

Rupnagar - Punjab

Tender For supply installation testing and commissioning of temperature sensors and cctv (ptz) cameras etc. at ggsstp, pspcl, roopnagar and sending real time feed to ppcb server.

CTN :41816849

18 Sep, 2025 NA

Mumbai - Maharashtra

Tender For replacement of panel switches sensors and allied accessories for car parking system at bhulabhai desai road in d ward

Central Government/Public Sector

CTN :41800405

22 Sep, 2025 NA

Bangalore - Karnataka

Tender For current and voltage sensors

Central Government And Public Sector

CTN :41797260

03 Oct, 2025 NA

Chittorgarh - Rajasthan

Tender For tender for supply of ird mechanalysis turbovisory instruments : : - make- ird mechanalysis limited ird544m-vibration sensor , inductive velocity , top exit , mil 2-pin connector , 42.52mv/mm/s , 10hz-1khz sku - m97120 , make- ird mechanalysis limited stud for vibration sensor item no 1 , mounting/grub screws , 1/4 inch-28unf male , m6x1male sku-stud-m6 provides connection between vibration sensor and mounting pad , m/s ird mechanalysis limited vibration sensor mounting pad mild steel blackodized for ird544m (60x60x16 mm) with m6 thread for item no 1 tapped sku - ms-pad-ird544m , make- m/s ird mechanalysis limited vibration sensor cable assembly for item no 1 , signal cable teflon 3.5mm dia , ss conduit 5mm id , 15 meter length straight , 2 pin ms , shielded , spade lugs at free end sku-m601015spade lugs at free end carry following colour code- red core-signal live black core signal ground green core- signal shield , make- ird mechanalysis limited eddy current pickup set comprising of probe , driver and connecting cable for 9 meter system. constituents.. 1) eddy current pickup , 8 mm tip dia , m10x1 thread. 60 mm long 2) eddy current pickup extension cable , 8 meters length , suitable connectors at both ends for connection to probe as well as driver 3) eddy current probe driver , -24v supply. these will with ird mechanalysis branding , make- m/s ird mechanalysis limited ird8800 rack , 8 position , 5u sku-m88008 this is the bin and will accomodate ird8800 cards , make-ird mechanalysis limited ird8800 (8800) , m88250 (88250) casing vibration module , 2ch velometer input (mv /mm/sec) and 1ch key phasor input , api standard 670 compliant sku-m88250-dc ird8800 series module m88250 can work with all types of velocity output vibration sensors that provide mv/mm/sec output - like ird531 (4 mv/mm/sec) and ird544m (42.52 mv/mm /sec) , make- m/s ird mechanalysis limited ird8800 (8800) , m88900 (88900) - speed module , 2ch eddy current pickup input , api standard 670 compliant , input- 24 v dc sku-m88900-dc input- accelerometer and/or velometer outputs-4-20 ma dc output proportional to full scale vibration , technical specification attached in pdf , make- ird mechanalysis limited ird8800 (8800) , m88600 (88600) - eccentricity module , 2ch eddy current pickup input , api standard 670 compliant , input- 24 vdc sku-m88600-dc input- accelerometer and/or velometer outputs-4-20 ma dc output proportional to full scale vibration , technical specification attached in pdf , make- ird mechanalysis limited 35 mm din rail mount industrial grade power supply , 480 w , product- rps480 , 24 v dc output , technical specification attached in pdf , make- ird mechanalysis limited cabinet 1500 x 600 x 600 in mm , ip32 sku - cabinet-1500-600-600-ip32 , installation , commissioning and calibration check of all supply sensor with unit at site .

Central Government/Public Sector

CTN :41799793

03 Oct, 2025 NA

Ratlam - Madhya Pradesh

Tender For tender for supply of supply of led flood light fitting 70wsuitable for 230 v ac 50 hz, luminousefficacy minimum 100lm/watt with ip-65protection and fitting shall be as perattached wr specification, lm79,lm80, testreport shall be submitted with offer, thefitting shall have warranty of 60 months.make: philips, halonix , ge, jaguar , supply of led street light fitting 36/40w, suitableto operate on single phase 230v ac 50hz supplyand material should be as per wr specificationattachedannexture.(wr/ccg/specification/p/001(rev01)/2018) , ip-65/66 protection, warranty/guarantee(minimum 60 months) material should be suppliedwith oem test report, make- halonix, philips, ge,jaquar , water level controller wlc d1-415vac, 50hzoutput contacts 1 co input sensors 3electrodessensitivity 1k - 200k (adjustable) trip time delayless than 1 sec. ,

Central Government/Public Sector

CTN :41799885

03 Oct, 2025 NA

Ranchi - Jharkhand

Tender For supply of oxygen (02) and carbon monoxide (co) sensors for flue gas analyzer km900

Central Government/Public Sector

CTN :41814313

29 Sep, 2025 NA

Multi City - Multi State

Tender For providing of handling ,transport and other mining services - percentage quote based - hiring of pay loder incorporated with weight sensors for mechanical transfer of size 100 mm coal to railway wagons for a quantity of 5891332 te for 1095 days at mahan ii wharf..

Sensors Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector