Get complete information related to latest Separator Element Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Separator Element Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Separator Element Tenders.
Tender For supply of title1 , title2 , title3 , title4 , title5 , title6 , title7 , title8 , title9 , drinking water coolers (v4) isi marked to is 1475 (q2) , automatic line voltage correctors (step type) for domestic use (stabilizer) conforming to is 8448 (q2) srtc of 50lph ro with following specifications: 1) capacity: 50 lph suitable ro membrane for input tds 2) booster pumps: dual pump (copper winding) 3) input tds: minimum 4000 ppm 4) pre-filtration: 20 pp sediment filter activated carbon filter 5) post-treatment: * uv (8 11w) * tds controller / mineral cartridge ensures maintenance for daily users. 1 year warranty with trusted service comes with a comprehensive 1-year warranty backed reliable service network., supply & installation of extension board/switch board of 16 amp. 3 socket outlets with switch with incomer mcb for connection of ro and water cooler complete as required, supplying, installation, testing and commissioning of air cooled hi wall split type air conditioners complete with indoor unit(idu), outdoor unit (odu), surface / concealed copper refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 mtr (idu to odu), copper power cable upto 3.5 mtr (idu to odu) i/c drain pipe r-32/r-410/ r-407 green refrigerant, wireless remote control, suitable for working between 180- 260v with low & high voltage cutoff and 50 hz ,1 phase ac supply capable of performing cooling, dehumidification, air circulation of following capacity with scroll / rotary compressor. the system shall be able to deliver 100% of the rated capacity upto 42 0c. min 5 year original equipment manufacturer (oem) warranty both compressor and printed circuit board (pcb). must comply: * /bid number : gem/2026/b/7677973 + /dated: 17-06-2026 ' ' / bid document 1 / 18
Tender For corrigendum : provision of 01 x 30 kva genr with connected items as standby power requirements for sewage treatment plant under age (i) bhalra - supply, installing, commissioning and testing, water cooled, sound proof silent type, turbo charged, diesel engine driven generating set 30 kva (at 0.8 pf), 415v, 3 phase, 4 wire engine as per is: 10001/10002 and alterator as per is: 13364, complete with relay panel for automatic starting on mains failure, control panels having meters in an integral acoustic enclosure as per recommendation cpcb norms, comprising of the following:notes: quoted rates shall deemed to include the following also:-(i) supply of t and p and normal space ie., bi-hexagonal ring spanner set of 12 pieces - 01 set.(ii) fuel measuement gauge - 01 no, hand operated fuel lifting pump with steel pipe 40mm dia - 01 no, hydro meter - 01 no, set of fan belt, oil/ fuel filters initial filling of coolant (coolant-2liters).(iii) service maintenance manual along with cat part list and price list - 03 set each.(iv) make of engine and alternator will be got approved from age (i) bhalra before placing the order., (a) diesel engine. diesel engine developing suitable bhp, 1500 rpm inclusive of the following standard accessories:(i) radiator/ heat exchanger cooling system. (xiv) battery charging generator.(ii) spider coupling guard. (xv) industrial silencer.(iii) fly wheel. (xvi) lubricant oil cooler.(iv) fly wheel housing complete with starter gear ring and coupling. (xvii) flexible pipe for silencer. (v) fuel pipes. (xviii) battery volt meter.(vi) air cleaner. (xix) water temperature gauge, lub oil pressure (vii) fuel and lubricant oil filter. gauge.(viii) by pass filter. (xx) speedo meter and engine running hours meter.(ix) coolant inhibitor. (xxi) display for fault.(x) fuel pump. (xxii) turbo charger.(xi) water pump. (xii) lubricant oil pump.(xiii) self/electric starter.(b) alternator : synchronous alternator 3 phase 4 wire, 50 cycles 1500 rpm, self excited, self regulated, brushless type, 0.8 pf, 415v, ac supply, 30 kva capacity, copper wound, complete including necessary tools, mounted on strong rigid steel fabricated base frame and directly coupled through flexible coupling with diesel engine, complete all as specified and directed., (c) amf/ control panel : amf panel factory made of suitable capacity as per original equipment manufacturer make and specification or as approved by oem for dg set of capacity 30 kva of suitable size, indoor cubical type, front and back openable fabricated out of mild steel sheet 1.6mm thick grounted in floor with adequate pcc foundation and minimum consisting of following :(i) contactor of suitable size for 30 kva dg set.(ii) copper bus bar of suitable current rating and sensitivity relay set unit with auxiliary cts.(iii) electronic latch circuit with tripping indication.(iv) re-set facilities.(v) 3 phase mvr relay unit with single phase protection complete with 2 no nc auxiliary contacts.(vi) 3 phase avr relay unit complete.(vii) self sequential starting relay unit 12 volts dc complete with alarm and power contactor. (viii) electronic timer 220 volts for main contactor with 1 no nc auxiliary contactor.(ix) electronic timer 220 volts for fuel cut off operation with 1 no auxiliary contactor.(x) battery charging 2x12 volts 10 amp complete with digital voltmeter and amps meter, including trickle and boost charging, make : su-kam, amco, exide or any other make as recommended by the manufacturer.(xi) volt meter 0-500 volts panel mounting of size 96mm square with selector switch digital type.(xii) amps meter 0-100 amps with 3 nos cts, 400/5 and selector switch 96 mm square digital type.(xiii) frequency meter (45-55) hz, 415 volt, 96mm square digital type.(xiv) the amf panel should have manual by pass arrangement too in case of failure of amf panel., (d) fuel tank of capacity as per manufacturer recommendations.(e) base frame made out of suitable channel duly reinforced and provided with adequate nu
Tender For supply of major repair kit steering for mpv , radiator hose cooling pipe d1 for als , radiator hose cooling pipe d2 for als , air filter for tata safari strome , oil filter for tata safari strome , fuel filter assy for tata safari strome , two pipe filter for tata safari strome , three pipe filter for tata safari strome
Tender For bid to ras supply of bearing clutch release , arm clutch release , door lock rear , wiper blade , ac filter for , horn assy , ac fan assy , inner brg , bearing , roller bearing outer , switch assy starting motor , cricuit braker 24v 6a , switch 443 853 108 033 , startor motor 24v , ingition cum steering lock , bearing bush , s a cooling fan , coolant pipe hose , ac compressor , rd bottle
Tender For auction sale of depot non ferrous scrap - lot no.y.nfa-1.exemp.n-1 & i-3.06.26.04 description- scrap aluminium with iron attachments and other aluminium casting, field coil, lamp caps, aluminium boring etc. [our offer :- scrap & cond. aluminum items (with or without iron & fiber attachment) such as aluminium sheet, piston, door, air filter , aluminium side top section , oil cooling impeller, emergency brake accelator, ladder & other miscellaneous aluminium item etc. as available in the lot] [loading will be done by purchaser's own arrangement]
Tender For procurement of lab equipments for mechanical engineering department. - procurement of lab equipments for mechanical engineering department., exhaust gas analyzer: portable 5 gas exhaust analyser for automotive lab use measurement of, co (0-10 %) co2 (0-20%) hc (0 20000 ppm) o2 (0-25%) nox (0 5000ppm) gas sampling rate 01 lit / min response time = 5 seconds warm up time =03 minutes display lcd input membrane keyboard operating temperature - 0- 50 degree celsius power consumption 25 w, operates on 230 v ac / battery supplied with sampling probe, filters, and carrying case, 3d printer: build volume (wxdxh) 256 x 256 x 256 mm * shell enclosed (plastic & glass) hot end all-metal nozzle 0.4 mm stainless steel included max hot end temperature 300 nozzle diameter 0.4 mm (included) 0.2 mm, 0.6 mm, 0.8 mm (optional) build plate compatibility textured pei plate, cool plate, engineering plate, high temperature plate max build plate temperature 100 max speed of tool head 500 mm/s max acceleration of tool head 20 m/s supported filament pla, petg, tpu, pva, pet, abs, asa chamber monitoring camera low rate camera 1280 x 720/0.5fps time lapse supported filament run out sensor yes control board fan closed loop control auxiliary part cooling fan closed loop control air filter activated carbon filter, mitutoyo screw thread micrometer (0 -25 mm) mitutoyo screw thread micrometer 0 25 mm range; 0.001 mm accuracy; 0.005 mm/0.01 mm resolution; interchangeable anvils & spindle tips for multiple thread forms hardened measuring faces ratchet stop; calibration certificate protective case
Tender For supply of jcb nk engine cooling fan assy , jcb 30152-01-00 thermostate valvle , x2 misc-32301303-r1 automatic voltage regulator , jcb nk000386 ait filter inner , jcb nk00082 fuel filter , jcb 320-08547 fan belt , jcb 25-606504 kit seal oil , jcb nk regulator with rectifier