Latest service valve Tenders | Government service valve Tenders

CTN :45543296

27 Jun, 2026 NA

Gwalior - Madhya Pradesh

Tender For bid to ras supply of membrane , vessel , carbon , filter , cleaner 5 ltrs , stainer and pipe , grass , pvc pipe , switch , cap , motor , wire , water pump , plug 2 pin , service valve , cooper pipe , drain pipe , outdoor fan motor

CTN :45692458

15 Jul, 2026 75.91 Lacs

Panaji - Goa

Tender For supply of machinery and equipment - uv-vis spectrophotometer spectrophotometer should be of true double beam optics system. sample compartment should have dedicated one reference cell holder and one sample cell holder. system should be czerny-turner monochromator with lo-ray-ligh grade blazed holographic grating or equivalent. system should have a light source of 20-w halogen lamp and deuterium lamp. automatic switch over of light source to be possible and auto position adjustment. system should have a fixed spectral bandwidth of 1nm. system should have facility to use as stand-alone keyboard-display and with pc-controlled software. wavelength range should be from 190 nm to 1100 nm and wavelength accuracy should be 0.1 nm at d2 656.1 nm & 0.3 nm for entire range. stray light: less than 0.02% at 220 nm (nai)less than 0.02% at 340 nm (nano2) less than 0.5% at 198 nm (kcl) photometric range:absorbance: -4 to 4 abs transmittance: 0% to 400% system should have photometric accuracy : 0.002 abs at 0.5 abs 0.004 abs at 1.0 abs 0.006 abs at 2.0 abs(measured using nist930d/nist1930 or equivalent) system should have a baseline flatness: less than 0.0006 abs (1,100 to 190 nm, one hour after light source turned on) system should have a noise level: less than 0.00005 abs (700 nm). detector should be silicon photodiode only. system should have a usb drive port to connect the printers or external drives. system should compulsorily have bio-method mode of measurement for determining dna and protein concentrations. quantitates dna or protein using the absorbance at 260/230nm. system should be capable of identification of organic compounds, chemical reaction tracking and enzyme reaction measurement. pc with relevant hardware including monitor keyboard, mouse., fuming hoods the proposed floor-mounted aerodynamic fume hood (1800 1000 2350 mm) is designed for safe handling of hazardous fumes, ensuring high performance, durability, and compliance with international standards. the system should be a robust, corrosion-resistant, and safety-compliant solution with efficient airflow management, user-friendly maintenance features, and adherence to international laboratory safety standards ideal for advanced research and chemical handling applications.1) design & compliance aerodynamic structure with automatic bypass airflow system. conforms to ashrae 110:2016 / en 14175 standards, including tracer gas containment test. certified ashrae compliance required 2) construction & materials made of powder-coated galvanized iron (gi, 120 gsm, is 277 compliant) sheet thickness: 1 mm (1.2 mm for structural supports) heavy-duty base frame: 60 40 2 mm phenolic resin (6 mm) inner liner: chemical-resistant, smooth, easy to clean ss 304 worktop with 15 mm raised edges for spill containment ss 304 aerodynamic airfoil with anti- corrosive coating 3) dimensions & workspace usable workspace: 1500 mm (w) 850 mm (d) 1180 mm (h) clear viewing height: 1100 mm modular base cabinets with maintenance access 4) coating & finish 8-stage chemical pre-treatment epoxy polyester / polyurethane coating (70 80 microns) corrosion resistance validated by 1000-hour salt spray test 5) functional features vertical sliding toughened glass sash (4 5 mm), counterbalanced openable front top panel for easy maintenance aerodynamic baffle system for efficient fume removal (light to heavy fumes) flow control damper for airflow regulation 6) utilities & safety integrated gas, water, and electrical fittings in corner posts remotely operated, color-coded service valves safety partition between utilities no cable entry below sash (enhanced safety design) electrical fittings: norysis /legrand (230v, 5/16a, 50 hz) 7) accessories pp cup sink with water tap and drainage led lighting with protective enclosure adjustable leveling screws ( 10 mm) storage base cabinets with shelves and self-closing shutters 8) centrifugal blower specifications remote, silent ms + frp blower with chemical-r

CTN :45672630

15 Jul, 2026 NA

Kochi - Kerala

Tender For providing of custom bid for services - valve salvaging, crushing of valves and dpr at kochi lpg plant

Central Government / Public Sector

CTN :45469612

30 Jun, 2026 NA

Begusarai - Bihar

Tender For corrigendum : supply of m7901800001motor 1ph550wp3m01h12002 , m7901800002 idu pcb including sensor vdsu03a1 , m7901800003 wired remocon pcb with cable vdsu06b1 , m7901800004 blower assy right syz 10101 , m7901800005 expansion valve aae 8 hc odf ee 5ft 58x , m7901800006 g i air filter ac158034003nn , m7901800007 filter drier dcl165023z501058f , m7901800008 voltage monitor lp delay 20 sec mkm , m7901800009 05 hp 370w 900 rpm picl motor uh11139 , m7901800010 crank case heater dia 170hlm072 , m7901800011 fan4 lobe 24 in metallic cruise , m7901800012 118 brazed tube with service valve , m7901800013 58 brazed tube brass service value , m7901800014 mw fl ac hp switch yk01h 000450p350r , m7901800015 mw fl lp switch yk011 000035g050g , m7901800016 schrader valve 14 fi 18 npt brass , m7901800017 compressor yh266t110085 tr r407c

CTN :45493319

23 Jun, 2026 NA

Sultanpur - Uttar Pradesh

Tender For corrigendum : providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - repairs on the valves of all pans installed in the mill (comprising five units: four 40-tonne and one 60-tonne); conduct hydraulic testing by inserting blanks into the calandria as required to identify and replace leaking tubes, repeating the process until no leaks remain; subsequently, fit all manholes, sight glasses, valves (including cut-over and discharge valves), and service valves associated with molasses tanks, condensers, and nozzles; complete all necessary repairs and mechanical work; and finally, fill the vessel with water to conduct a satisfactory water trial

State Government

CTN :45425137

29 Jun, 2026 6.86 Lacs

Jaipur - Rajasthan

Tender For corrigendum : supply of miscellaneous tp hardware and consumable fitting/fixtures etc. for corrective maintenance to jmrc- non bsr items, aerolite 450gm (epoxy rash and hardner adhesive make, aralditel aerolibelloctite bondthe), anchor fastener (10 mm), anchor fastener (6 mm), angle valve/brass dish angle valve stainless steel fish, arabite tube (180 gms) ( rasin and hardner adhesive make, arabitel aeroliteloctite bondthe), bend nose pillers, big disc brass spindle 3/4", black screw 1 inch (500 pcs.), black screw 1.5 inches (500 pcs), professional rotary hammer drill machine (make:bosch gbh 2-26 re or equivalenti, brass spindle with rubber washer (04 no.), claw hammer, cp napple (1 inch), cp nipple (1.5 inch), cp nipple (2 inch), cpvc ball valves 3/4 inches, cpvc socket 314 inches, cpvc solvent (20 gm each), curtain pipe (wall and hanging support holder, cylinder 60mm godrej dorset, cylinder 70mm godrej dorset, danfoss solenoid valve coll, door doser gliding bar type, door stopper, doorset/podrej europrofile cylinder lock)(80 mm), double side tape, dr. fixft waterproofing super latex compound (1kg), electric extension board (10 mtr wire, 3 sockets), electrical tape (steelgro, 30pcs), fevlquick (20 gms) (grade 203), feviquick (20 gms) (grade 463), float switch, gaskit for windows/epdm rubber deal for windows, gil end plug (0.5 inch), glass fibre measuring tap 30 mtr. length, hammer ll bit (10 mm), hammer dirfll bit (12 mm), hammer drill bit 6mm, hammer drill bit 8mm, hasp staple (latch) (100 mm), hasp staple (latch)(80 mm), heavy duty stainless steel lock for glass door thickness 10 mm to 12 mm, hex head bell-drilling roof screws with rubber sealing washer 12x65mm (200 pcs.), holdtite (50 grm each), hydraulic door closer (131 mark), key hive locks (drawer lock), l patti (2 inch), metal disc cutter blade (04 inch), mortise lock 70mm complete, m-deal 90/100gm, nose pier, padlock, pipe wrench 18", pu dotted hand gloves (make udyog or equivalent), pvc green carpert mat 12mm thick 1200mm * 750m =, pvc safety gloves size large, pvic solvent (100 gm each), retro reflective tape 3m make (50 mr.), ro op nipple, round casting clip (100 pcs.), screw bit, screw driver, screw extractor set, self taping (hexahead) (02 inch) (100 pcs.), self tapping screw (6-8mm top dila) 13 mm, belt tapping screw (6-8mm top dia) 19 mm, delf tapping screw (6-8mm top dia) 25 mm, self tapping screw (6-8mm top dia) 38 mm, self tapping screw (6-8mm top dia) 50 mm, self tapping screw (6-8mm top dia) 75 mm, top dia) 6.35 mpm belf-tappling screw (6-8mm, bilding/telescopic ladder, small clisc brass spindle sqrt(2), stainless steel frameless clamp (both side screw arrangement) , steel measuring tap 5 mtr. length, stone cutter disc (04 inch), talon tape, thinner, todi bag, tower bolt (6 inch), transparent extra strong virgin mlcl sheet film tirpal (120 to 1:50 gdmx50x 30 feet), universal pvc cistern handle with rod, wall plug/bcrew git 38mm, wall plug/bcrew git (32 mm), wall plug/screw git (50mm), wall plug/screw git (70mm), waste pipe, water meter 1" (rahul make), water meter 2" (rahul make), wd-40 (400420m), zoloto 32 mm forged brass ball valve 10088 of 10 marked

State Government

CTN :45425974

29 Jun, 2026 6.86 Lacs

Jaipur - Rajasthan

Tender For corrigendum : supply of miscellaneous t and p hardware and consumable fitting fixtures etc. for corrective maintenance to jmrc - non bsr items, aerolite 450gm (epoxy rasin and hardner adhesive make araldite/aerolite/loctite/bondtite), anchor fastener (10 mm), anchor fastener (6 mm), angle valve / brass dish angle valve stainless steel finish, araldite tube (180 gms) (epoxy rasin and hardner adhesive make araldite/aerolite/loctite/bondtite), bend nose pliers, big disc brass spindle 3/4", black screw 1 inch (500 pcs.), black screw 1.5 inches (500 pcs.), professional rotary hammer dril machine (make:bosch gbh 2-26 re or equivalent), brass spindle with rubber washer (04 no.), claw hammer, cp nipple (1 inch), cp nipple (1.5 inch), cp nipple (2 inch), cpvc ball valves 3/4 inches, cpvc socket 3/4 inches, cpvc solvent (20 grm each), curtain pipe (wall fix and hanging support) holder, cylinder 60mm godrej/dorset, cylinder 70mm godrej/dorset, danfoss solenoid valve coil, door closer sliding bar type, door stopper, doorset/godrej(europrofile cylinder lock)(80 mm), double side tape, dr. fixit waterproofing super latex compound (1 kg), electric extension board (10 mtr wire, 3 sockets), electrical tape (steelgrip, 30pcs), feviquick (20 gms) (grade 203), feviquick (20 gms) (grade 463), float switch, gaskit for windows / epdm rubber seal for windows, gi end plug (0.5 inch), glass fibre measuring tap 30 mtr. length, hammer drill bit (10 mm), hammer drill bit (12 mm), hammer drill bit 6mm, hammer drill bit 8mm, hasp staple (latch)(100 mm), hasp staple (latch)(80 mm), heavy duty stainless steel lock for glass door thickness 10 mm to 12 mm, hex head self-drilling roof screws with rubber sealing washer 12x65mm (200 pcs.), holdtite (50 grm each), hydraulic door closer (isi mark), key hive locks (drawer lock), l patti (2 inch), l patti (4 inch.), l patti (5 inch), metal disc cutter blade (04 inch), mortise lock 70mm complete, m-seal 90/100gm, nose plier, pad lock, pipe wrench 18", pu dotted hand gloves (make udyogi or equivalent), pvc green carpert mat 12mm thick 1200mm x 750mm, pvc safety gloves size large, pvc solvent (100 grm each), retro reflective tape 3m make (50 mtr.), ro cp nipple, round casing clip (100 pcs.), screw bit, screw driver, screw extractor set, self taping (hexa head)(02 inch) (100 pcs.), self tapping screw (6-8mm top dia) 13 mm, self tapping screw (6-8mm top dia) 19 mm, self tapping screw (6-8mm top dia) 25 mm, self tapping screw (6-8mm top dia) 38 mm, self tapping screw (6-8mm top dia) 50 mm, self tapping screw (6-8mm top dia) 75 mm, self-tapping screw (6-8mm top dia) 6.35 mm, silicon gun, silicon sealent (white/black/transparant ), sliding/telescopic ladder, small disc brass spindle 1/2", stainless steel frame less clamp (both side screw arrangement) (for ss railing glass support), steel measuring tap 5 mtr. length, stone cutter disc (04 inch), taflon tape, thinner, tool bag, tower bolt (6 inch), transparent extra strong virgin mlcl sheet film tirpal (120 to 150 gsm)(50x 30 feet), universal pvc cistern handle with rod, wall plug/screw gitti 38mm, wall plug/screw gitti (32 mm ), wall plug/screw gitti (50mm), wall plug/screw gitti (70mm ), waste pipe, water meter 1" (rahul make), water meter 2" (rahul make), wd-40 (400/420ml), zoloto 32 mm forged brass ball valve 1008b of isi marked

Central Government/Public Sector

CTN :45611986

30 Jun, 2026 NA

Ranchi - Jharkhand

Tender For notice inviting tender for supply of split ac spares at iim ranchi brazing torch ,copper pipe soft 1/4 ,copper pipe soft 5/8 ,copper pipe 1/2 ,3 core copper cable 2.5 mm ,flair nut 5/8 ,flair nute 1/4 ,flair nute 1/2 ,nitrile insulation cover 5/8 ,nitrile insulation cover 1/4 ,brown tape ,r-22 refrigerant ,dead nut ,condenser coil 2tr ,service valve 5/8 (l.g)/ l-type ,straight brass stop valve

Central Government/Public Sector

CTN :45577788

08 Jul, 2026 NA

Duliajan - Assam

Tender For tender for supply of forged steel needle valves alloy steel full thread stud bolt and valves - valve needle fs api lpt scr half inch x 5000 lb , bolt stud alloysteel f thd , bolt stud alloysteel f thd , valve gate api lpt 3 inch x 128 lbs api std 5b , 12 inch butterfly valve , 4 inch gate valve threaded

Central Government / Public Sector

CTN :45586963

08 Jul, 2026 NA

Begusarai - Bihar

Tender For supply of valves for fwp house , foot valve for emergency reservoir pump house , miscellaneous valves , ibr valves , hydrogen service valves , non-ibr valves , valves for drinking water line

Service Valve Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector