Latest servo controller Tenders | Government servo controller Tenders

Central Government/Public Sector

CTN :45263257

23 Jun, 2026 NA

Delhi - Delhi

Tender For supply of uhv deposition chamber - uhv chamber specification (vacuum better than 2 10-9 mbar uhv) chamber overview spherical (diameter 14 ) or equivalent square shaped uhv chamber with support frame equipped with three (3) x 2-inch magnetron sputtering sources. all cf flanges and uhv viewports/ss blanks, three (3) x 2-inch magnetron sputtering sources. each sputtering source has an individual gas inlet line for process gases. all cf flanges., substrate holder : diameter: 2 inches; heating molybdenum heater capable of heating substrate (a) from room temperature (rt) to 800 c during rotation and (b) from room temperature to 1000 c without rotation. rotation: substrate holder can rotate continuously, driven by a stepper motor. variable speed from 0 to 10 rpmmovement: up / down vertical movement of total 25mm to adjust substrate position during deposition sputtering geometry: one sputtering source mounted parallel to the substrate surface, tilt adjustable. two sputtering sources mounted confocally at an angle relative to the substrate. base pressure: lower than 2 10 mbar (ultra-high vacuum)., vacuum pumping system: turbo molecular pump: pfeiffer hipace300 / edwards next 300 / leybold turbovac 350i with cf100 flange or equivalent with integrated controller, ion pump with controller: included to maintain uhv vacuum levels and provide clean pumping., backing pump: pfeiffer hiscroll 12 / edwards nxds 15i / leybold scroll vac 15 plus or equivalent dry scroll pump used to back tmp, gate valves : one cf100 and one cf150 manual gate valves for isolating the chamber from the pumping systems as well as throttling, vacuum gauges and measurement: one cold cathode gauge with readout capable of measuring vacuum pressures down to1 10-10 mbar for precise uhv monitoring., one capacitance manometer gauge with measurement range from 1 10-1 to 1 10 mbar for accurate pressure reading during deposition phase, gas delivery system: two independent mass flow controllers (mfcs):a. one mfc (0-100 sccm) for argon gas feeding to all three sputtering sources via high vacuum valves.b. one mfc (0-100 sccm) for nitrogen gas feeding directly into the chamber with its own high vacuum valve.gas lines for ar and n2 are physically separated to avoid cross-contamination., chamber access and viewports: 1. two view ports installed on the chamber, each equipped with manual shutters. 2. access ports for gauges, pump, gas inlet and few spares for future upgradation., baking capability: entire chamber designed to bake-out at 150 c to reduce contamination and out gassing during operation, cooling capability : water manifold with flow switch / flow meters, near uhv chamber specification: chamber overview: spherical (diameter 14 ) or equivalent square shaped uhv chamber with stand., three 2-inch magnetron sputtering sources, each with individual gas inlet. all cf flanges and uhv viewports/ss blanks., substrate holder: a. diameter: 2inches; heating : molybdenum heater capable of heating substrate (a) from room temperature (rt) to 800 c during rotation and (b) from room temperature (rt) to 1000 c without rotation b. rotation : substrate holder driven by stepper motor. variable speed from 0 to10 rpmmovement: up / down vertical movement of total 25mm to adjust substrate position during deposition sputtering geometry: one sputtering source mounted parallel to substrate surface (tilt able preferred). two sputtering sources mounted confocally at an angle. base pressure : lower than 5 10 mbar (near uhv)., vacuum pumping system: turbo molecular pump : pfeiffer hipace 700 / edwards next 730 / leybold turbo vac 900 ix or equivalent with cf100 flange and integrated controller, suitable for near uhv vacuum., backing pump: pfeiffer hi scroll 12/edwards nxds15i / leybold scroll vac 15 plus or equivalent dry scroll pump used to back tmp, gate valves: one cf150 manual gate valve to isolate / throttle chamber from pumping system, vacuum gauges and measurement: cold cathode readout capable of dis

Central Government/Public Sector

CTN :45037536

29 May, 2026 NA

Hoshangabad - Madhya Pradesh

Tender For supply of "set of three yearly overhauling kit consisting of 15 items (27 nos) for master controllerof emd pt. no.40055299, dlw pt.no.17050455 of hhp diesel locomotive suitable for kepco make master controller as per annexure attached." [ warranty period: 30 months after the date of delivery ]- pin spring-3/16 diameter x 7/8 inch long, pin spring-1/8 diameter x 1 inch long, pin spring-3/16 diameter x 1 inch slotted, pin spring-3/16 diameter x 1.5 inch slotted, pin clevis-1.60 inch long, ring retaining-metric, spring detent arm, pin swivel, ring retaining-1/4 inch, spring reverser lock, spring clevis, pin spring 3/16 diameter x 1-3/8 inch long, ring retaining, bracket throttle handle, screw 8-32 fcs for bush 7/16

Central Government/Public Sector

CTN :45297896

01 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For supply of oh kit for controller assembly dynamic brake for hhp locos, consisting of 18 items as follows: 1) pin spring -3/16 diameter x 7/8 inch long (spiral pin modified) -kepco partno:100015 qty:2nos. 2) pin spring -1/8 diameter x 1 inch long (spiral pin modified) - kepco part no: 100019 qty: 1no. 3) pin spring -3/16 diameter x 1 inch slotted (spiral pin modified) - kepco part no: 100028 qty: 3nos. 4) pin spring -3/16 diameter x 1 1/2 inch slotted - kepco part no: 100032 -qty: 2nos. 5) pin clevis - 1.60 inches long - kepco part no: 100135 -qty: 2nos. 6) ring retaining -metric - kepco part no: 100039 -qty: 1no. 7) spring detent arm- kepco part no: 100042 -qty: 1no. 8) pin swivel - kepco part no: 100231 -qty: 2nos. 9) ring retaining - 1/4 - kepco part no: 100054 -qty:4nos. 10) spring reverser lock- kepco part no: 100055 -qty: 2nos. 11) spring clevis - kepco part no: 100080 -qty: 1no. 12) pin spring 3/16 diameter x 1-3/8 inches long - kepco part no: 100092-qty: 1no. 13) ring retaining - kepco part no: 100123 -qty: 2nos. 14) spring plunger - kepco part no: 100133 -qty: 1no. 15) socket bulb - kepco part no: 100085 -qty: 1no. 16) handle directional - phelolic - kepco part no: 100087 -qty: 1no. 17) bracket throttle handle - kepco part no: 100122 -qty: 1no. 18) screw 8-32 fcs for bush 7/16 - kepco part no: 100200 -qty: 2nos. make: kepco or equivalent supplied by approved vendors of master controller of emd locomotive, pl no: 17050455 are acceptable. hsn code: 86079100. [ warranty period: 30 months after the date of delivery ] ]

CTN :45148672

18 Jun, 2026 55.0 Thousand

Delhi - Delhi

Tender For corrigendum : supply of brake shoe , fan belt , mud flap , rear view mirror , hand brake cable , oil filter , fuel filter , water pump belt , air suction hose , fuel pipe delivery , radiator hose , radiator relay , horn , wiper blade lh , wiper blade rh , engine gasket , throttle body gasket , rear shock absorber kit , kit steering gear box , clutch plate , pressure plate , disc front brake , valve oil controller , sensor assy maf , sensor oxygen assy , engine mtg pad lh , engine mtg pad rh , engine mtg front , engine mtg rear

CTN :45264913

30 May, 2026 NA

Goa - Goa

Tender For supply of brake lever front , brake lever rear , throttle with key , saddle , chain , controller , crank set , disk rotor , padal set , charger , bottom bracket , battery lock , front fork rim , front wheel , rear wheel rim , rear wheel spoke set , freewheel cog

CTN :45180010

05 Jun, 2026 NA

Pune - Maharashtra

Tender For corrigendum : providing of custom bid for services - ----,custom bid for services - ----,custom bid for services - ----,custom bid for services - ---- non-comprehensive amc and calibration for servo-controller universal testing machine, capacity-60 ton, make fie

CTN :45151801

23 May, 2026 NA

Kalyani - West Bengal

Tender For installation of micro controller based compression testing machine-servo controller in compression testing machine installed in the civil engineering laboratories at rctrc, kalyani, nadia

CTN :45173458

04 Jun, 2026 NA

Pune - Maharashtra

Tender For supply, installation, testing and commissioning (sitc) of high-bandwidth servo controller.

CTN :45011977

15 May, 2026 NA

Hyderabad - Telangana

Tender For supply of movable storage compactors for mechanical or electrical equipment storage , multi point approach hexagonal workbench , work bench fitting, grinding and other machine shop activities , calibration or servo controller system working table , esd safety clothing and equipment storage locker , working chairs for office personnel , tirpal or tarpaulin sheets with 6 eyelets 6m x 6m

Central Government/Public Sector

CTN :45012762

11 May, 2026 NA

Chennai - Tamil Nadu

Tender For supply of oh kit for controller assembly dynamic brake for hhp locos, consisting of 18 items as follows: 1) pin spring -3/16 diameter x 7/8 inch long (spiral pin modified) -kepco partno:100015 qty:2nos. 2) pin spring -1/8 diameter x 1 inch long (spiral pin modified) - kepco part no: 100019 qty: 1no. 3) pin spring -3/16 diameter x 1 inch slotted (spiral pin modified) - kepco part no: 100028 qty: 3nos. 4) pin spring -3/16 diameter x 1 1/2 inch slotted - kepco part no: 100032 -qty: 2nos. 5) pin clevis - 1.60 inches long - kepco part no: 100135 -qty: 2nos. 6) ring retaining -metric - kepco part no: 100039 -qty: 1no. 7) spring detent arm- kepco part no: 100042 -qty: 1no. 8) pin swivel - kepco part no: 100231 -qty: 2nos. 9) ring retaining - 1/4 - kepco part no: 100054 -qty:4nos. 10) spring reverser lock- kepco part no: 100055 -qty: 2nos. 11) spring clevis - kepco part no: 100080 -qty: 1no. 12) pin spring 3/16 diameter x 1-3/8 inches long - kepco part no: 100092-qty: 1no. 13) ring retaining - kepco part no: 100123 -qty: 2nos. 14) spring plunger - kepco part no: 100133 -qty: 1no. 15) socket bulb - kepco part no: 100085 -qty: 1no. 16) handle directional - phelolic - kepco part no: 100087 -qty: 1no. 17) bracket throttle handle - kepco part no: 100122 -qty: 1no. 18) screw 8-32 fcs for bush 7/16 - kepco part no: 100200 -qty: 2nos. make: kepco or equivalent supplied by approved vendors of master controller of emd locomotive, pl no: 17050455 are acceptable. hsn code: 86079100. [ warranty period: 30 months after the date of delivery ]

Servo Controller Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector