Latest servo drive Tenders | Government servo drive Tenders

CTN :45346460

04 Jun, 2026 NA

Vellore - Tamil Nadu

Tender For supply of eee lab items dept use - three phase transformer rating: 3 kva input voltage: 415 v ac, 3-phase output voltage: 230 v ac, 3-phase frequency: 50 hz winding material: copper wound insulation class: class b or higher duty: continuous duty suitable for laboratory usebench/floor mounted suitable for laboratory operation all winding terminals shall be brought out to insulated terminals and enclosed within a protective outer cover for safe laboratory operation , dc stepper motor driver kit with stepper motorinput supply : 230 v ac, 50 hz stepper motor : permanent magnet / hybrid type with suitable driver circuits. motor operating voltage : 12 24 v dc variable speed control forward and reverse direction control full step and half step operation manual / automatic pulse generation facility built-in regulated dc power supply led indication for phase sequence and status test points provided for waveform observation start / stop control switches to be provided overload and short circuit protection to be provided mounted on compact powder coated cabinet with printed circuit diagram proper insulated terminals and interconnecting leads to be provided patch chords for interconnection. , dc servo motor driver kit with servo motorinput voltage 12 - 24v, dc, 5a, 10-60rpminput supply : 230 v ac, 50 hz servo motor type : dc servo motor with feedback arrangement motor operating voltage : 12 24 v dc controller type : microcontroller based servo drive controller speed control : variable speed control to be provided position control : angular position control facility to be provided direction control : forward and reverse operation feedback device : encoder / potentiometer based feedback system built-in regulated dc power supply led indications for power and status test points to be provided for signal observation and analysis start / stop control switches provided overload and short circuit protection to be provided mounted on powder coated cabinet with printed circuit diagram proper insulated terminals and interconnecting leads to be provided , three phase resistive loadrating: 5.25 kw supply: 415 v ac, 3-phase, 50 hz total number of load steps: 6 main switch to be provided approximate dimensions: 18 18 22 inches (l b h) comprising special cement-insulated electrical load resistors mounted on powder-coated ms panel/enclosure individual on/off rotary switches for load selection mounted on rubber wheels/casters for portability suitable for laboratory load testing applications proper insulation, ventilation, and earthing arrangement to be provided , single phase induction motor with load arrangement 5hp ,230v, 1400 rpmsingle phase, 2hp,230v,1440 rpm with dol starter loading arrangement and electrical workbench mechanical rope with aluminum brake drum loading with adjustable wheels - 2 no s 0-50 kg spring balance - 2 no s electrical panel board with workbench -cupboard with door. panel board- with proper internal wiring& terminals insulated necessary symbols of motor and starter, fuse, supply indicators to be provided and printed on panel board -digital rpm indicator with proximity sensor to be provided -required number of digital ammeter , three phase synchronous motor with electrical workbench 3-phase synchronous motor with electrical workbench and loading arrangement , rating: 5 hp voltage: 440 v ac, 50 hz speed: 1500 rpm (synchronous speed), induction start using damper winding, suitable starter panel, dc supply (0 220 v dc adjustable (variable dc control) within the panel),and necessary workbench electrical panel board with workbench -cupboard with door. panel board- with proper internal wiring& terminals insulated necessary symbols of motor , starter, exciter, fuse, supply indicators to be provided and printed on panel board -digital rpm indicator with proximity sensor to be provided -required number of digital ammeters and voltmeters for motor to be provided on panel board. , synchronizing panelthree phase, 415v, 15a synchronizi

CTN :45352757

08 Jun, 2026 11.41 Lacs

Sikar - Rajasthan

Tender For street light accessories and phase wire work in losal area - work, supplying and drawing of xlpe insulated lt aerial bunched aluminium conductor cable confirming to is 14255/1995 and is 398 (pt-4)/ 1994 and as per discom specs. on existing cross arms through i hook with all necessary t&p required including binding and twisting etc. complete in all respect as required. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a"attached with this bsr ., 1 x 25 sq. mm. + 1x25 sq. mm. (insulated), supply and fixing of following lt supporting accessories with nut bolt & clamps made out as per standard discoms specifications with two coats of red oxide and two coats of aluminium paint etc. as required. all as per pre approved by engineer in-charge.for additional technical parameters of product / work refer annexure a attached with this bsr, suspension clamp with eye hook & pole clamp, dead end clamp with eye hook & pole clamp, p & fixing powder coated crca sheet enclosures on existing angle iron frame by means of nuts and bolts and making holes , din rail etc. as required.for additional technical parameters of product / work refer annexure a attached with this bsr, 2.0 mm thick, providing & fixing of ac operated heavy duty 230 /440 volt power contactor as per pwd specification for electrical works, isi marked is/iec 60947-4-1 : 2000 having provision of mechanical interlocking, auxilary contacts, din rail mounting type including making connections, testing etc. as required. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., 4 pole power contactors with following ac 1 rating 63 amp, providing & fixing of mechanical / digital time switch having following day / week programme and minimum 100 hours reserve and ac1 rating of 16-20 amperes including making connection, programming conforming to iec 60730-1 and 60730-2-7 etc. as required. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., one day & week reserve (analog type ), sitc of 3 /4 pole current limiting moulded case circuit breaker (mccb) made of flame retardent & heat resistant material having following current rating, short circuit breaking capacity at 440/415 v, 50 hz; o/l & s/c settings , conforming to is/iec 60947 p -2 :2003 with front face and centralised adjustable, trip free mechanisum, true contact position indicator, line load interchangeability, designed for both horizontal & vertical mounting without any adverse effect on electrical performance, suitable for operation upto 55 degree and without derating upto 40 degree, pollution degree 3, having positive isolation capability, push (test) to trip, trip time less then 10 ms under s/c condition, breaking capacity ics = 100% icu. u imp =8 kv, rated insulation voltage 690 v. provision for uvr , shunt trip , earth fault trip, door interlock, pad lock & rotary handle , including making connections etc. as required.oem shall have submit nabl / cpri / erda accrediated lab type test certificate before execution all as per pre approved by engineer in-charge. for additional technical parameters of product/ work refer annexure a attached with this bsr, 4 pole mccb with thermal magnetic release up to 100 amp , 10 ka, fixed o/l & fixed s/c setting, pipe earthing as per is:3043- 1987 with 3.0 mtr. long, 40 mm dia. b class g.i. pipe is: 1239 (part-1) 2004, equivalent to bs : 1387 with perforated holes of 12 mm dia ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and heavy duty weather proof poly-propylene earth pit chamber with lockable jam free lid suitable for safe working load 5000 kg or more of size top dia. 225 to 260 mm, bottom dia 300 to 350mm. and height 250 to 300 mm. and embodying the pipe compl

Central Government/Public Sector

CTN :45339300

08 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of micro controller based electronic speed indicator and recording with speed signal confirming to rdso spec. no ,mp -0-3700.07 rev -7 august -2017 range 0-120, voltage 24 v dc each set consisting of following items. 1) recording cum indicator unit 01 no(2).speed indicator -01 no.(3).pulse generator -01no(4).junction box -01 no.(5)connecting cable -01) set of 05 nos (recorder to indicator communication cable 25 mtrs. ) similar to laxven systems model no. lax-2000d8 for tower wagon. or similar make laxven systems, medha servo drive, autometers alliance ( rdso approved venders ) [ warranty period: 30 months after the date of delivery ] ]

Central Government And Public Sector

CTN :45334476

15 Jun, 2026 NA

Guwahati - Assam

Tender For camc of igbt based ac-ac traction control system lcc tcc including mandatory and optional items for 39 hhp diesel locos at diesel loco shed, new guwahati for a period of 02 years through oem i.e. medha servo drives pvt. ltd., hyderabad on single tender basis as per rdso doc no. mp miscellaneous 326 rev 01.

Central Government / Public Sector

CTN :45050098

29 May, 2026 NA

Guntakal - Andhra Pradesh

Tender For supply of set of fixed and mobile contact bits for line contactor of 1500 amps as per clw spec: 4tes.111.029 alt-2 and clw spec: 4tes.110.001 alt-4. each set consisting following 2 items: 1). fixed contact clw drawing no.3 twd.112.010 a, alt-4, qty. -1 no. 2). mobile contact clw drawing no.3 twd.112.016 a, alt-4, qty. -1 no ]

CTN :45297398

08 Jun, 2026 NA

Kanchrapara - West Bengal

Tender For supply of contact fixed & moving for arno starting contactor (c118) for m4/p4/g5/g7type conventional locomotive as per drg.no. kpa drg no.er/kpa.el/cn.4g5.4049a and ii) clw specn. no.- clw/es/c-15 alt-d. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45285152

28 May, 2026 NA

Liluah - West Bengal

Tender For corrigendum : supply of o-ring trelleborg item no. or4023000 for fitment on rear cover of vande bharat bearing as per medha servo drives pvt. ltd. drawing no. a-a675uv2-147770 (& mentioned in icf drg. no. 89002010; item no. 8). [ warranty period: 30 months after the date of delivery ] ]

Central Government / Public Sector

CTN :45152585

01 Jun, 2026 NA

Secunderabad - Telangana

Tender For comprehensive annual maintenance contract for ei systems of m/s medha servo drives private limited make at 5 (five) stations (chz,wl,jptn a/c,mvh,rdm bp/c)) in sc division for a period of four (4) years.

State Government

CTN :45272707

05 Jun, 2026 84.07 Lacs

Belgaum - Karnataka

Tender For tender for refurbishment of laboratories in bosch-rexroth centre at vtu mysuru - t connection, filter bowl, batteries for servo drive, pneumatic base, plastic pipe 6mm, plastic pipe 4mm, three way commector, magnetic reed sensor, electrical limit switch, compress oil, compressor, fr unit, male stud fitting with nrv, male stud fitting, male stud coupling for pneumatics, stud coupling, elbow swivel connector, straight fitting, male stud coupling, protective cover, emergency off button, pressure gauge, hose, pressure relief valve, smps, hydraulics oil, minimess hose, coupling sleeve, qrc - male

Central Government/Public Sector

CTN :45152699

11 Jun, 2026 NA

Mumbai - Maharashtra

Tender For comprehensive annual maintenance contract for medha electrics fitted 3 phase emu (igbt technology) rakes for 03 years on single tender basis through oem i.e. m/s medha servo drives pvt ltd. qty 192 basic unit quarter (4 medha rakes).

Servo Drive Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government And Public Sector

Central Government / Public Sector

Central Government / Public Sector

State Government

Central Government/Public Sector