Latest servo oil Tenders | Government servo oil Tenders

Central Government/Public Sector

CTN :45125921

18 May, 2026 NA

Mumbai - Maharashtra

Tender For auction sale of rolling stock - condemned diesel loco no. 36157 wds/6 with iron steel and non-ferrous. restricted items: 1. complete bogie frame with wheel set, axel box and gear case = 01 nos., 2. 03 nos. of wheel sets with axel boxes without gear case = 01 nos. removed items: 1. pneumatic valve and air dryer = 01 nos., 2. radiator core = 01 nos., 3. came shaft = 01 nos., 4. extension shaft = 01 nos., 5. lube oil junction 01 and junction pipe 02 = 01 nos., 6. lube oil cooler pipe = 01 nos., 7. lube oil strainer, bottom pipe and cock = 01 nos., 8. steel balo and upper rode lower = 01 nos., 9. water tank = 01 nos., 10. fuel primary filter body and secondary filter body = 01 nos., 11. sensor loader balo = 01 nos., 12. tsc foundation plate = 01 nos., 13. bubble collector pipe ( z pipe, c pipe) = 01 nos., 14. water temperature gauge, pipe = 01 nos. 15. traction motor = 06 nos. remark: 1. restricted items to be returned to the stock holder in good condition by the purchaser at the time of delivery. 2. lot no. is painted on loco. 3. approach road is available up to lot. 4. hsd oil and lubricants if found to be returned to the stock holder. 5. locos are presently stabled at diesel shed kurla. after auction and before handing over, loco will be placed at cla yard for cutting and delivery purpose. purchaser is advised that loco will be placed only after certification of line by sse/pway/mnkd and as advised by sse/d/cla. 6. after purchaser submit all the documents and d.o after auction to dme/d/cla office, sse/d/cla in consultation with sse/p.way/mnkd will decide the date of placement of loco at cutting yard and only after handing over of loco will be done. 6. purchaser has to ensure safety of railway asset and his labour while working in railway premises. if any losses arise due to negligence, the purchaser will be fully responsible. 7. purchaser has to personally visit the site and see the lot. no claim will be entertained after sale of lot. 9. purchaser has to keep enough water/sand at the cutting site. 10.lot is ok for sale. qty : 01 number. location: presently stabled at diesel loco shed kurla. stock holder: dme d cla .

Central Government/Public Sector

CTN :45102321

25 May, 2026 NA

Trivandrum - Kerala

Tender For supply of kluber synth ge 4 75w90 gear case oil for vande bharat train packing size 50 liters [ warranty period: 30 months after the date of delivery ]

CTN :45105326

16 May, 2026 NA

Jammu - Jammu And Kashmir

Tender For supply of injector assy , nozzle washer , clutch release brg , clutch booster , gear lever end rh , gasket for side cover , transfer case mounting bush , bracket mounting , gear box top kit , pole screw , accelerator cable , field coil assy , accelerator end , assy oil filter , oil filter , gear lever kit , rear view mirror rh , rear view mirror lh , kick returning spring , petrol tank cap , tool box lock set , bty box , clutch yoke , hand brake yoke , spider brg , gear lever repair kit , ram assy , brake shoe lock , gear lever assy , cap assy fuel tank , pipe intake , hose pipe , hose , pressure plate assy , gasket oil seal , bolt m12 70 long , fuel line filter , fan belt , fuel filter assy , clutch cable , pressure plate , cabin shocker , lubrication , tank gasket vehicular , door mechanism lh , sleeve cyl repair kit , wiper blade , ac condensor , gasket cover , main shaft , bearing , eng mtg pad ) /bid number : gem/2026/b/7510812 * /dated: 06-05-2026 & & / bid document 1 / 35

CTN :45119013

18 May, 2026 NA

Faridkot - Punjab

Tender For supply of oil seal , oil seal wing g box , wipper blade , cabing lifting pump , catch assy bonnet catch , water pump , gaket water pump , rotary switch , bearing , bearing t case , gear lever end , gasket , hinge assy rh , engine mounting pad frt , seal oil , mounting og rersilient , door lock assy , regulator assy rh , clutch plate assy , kick spring

CTN :45098081

20 May, 2026 2.00 Lacs

Sonitpur - Assam

Tender For supply of fuel pump assy , fuel filter , fuel injector , fan belt v , ac belt , ignition coil , sparl plug , air filter , oil filter , brake pad front , rear brake shoe , brake master cyl , clutch plate , pressure plate , clutch release bearing , input shaft bearing , tie rod end , rear wheel bearing , spider bearing , gear box oil seal rear , tfr case oil seal , eng mounting pad , oil seal crank shaft front , universal joint

CTN :45113238

18 May, 2026 NA

Haridwar - Uttarakhand

Tender For supply of polaris ps 4 extreme duty 5w50 , polaris premium 50 or 50 antifreeze coolant , transmission system or front gear case demand drive fluid , polaris agl 44 oz , u joint grease , all seasons grease or grease confirming to nlgi no 2 , polaris dot 4 brake fluid , polaris chain case oil

CTN :45114812

21 May, 2026 2.00 Lacs

Sonitpur - Assam

Tender For supply of belt alternator , belt vane pump , oil seal front axle , oil seal rear axle , eng mounting pad , injector , brake master cyl , rep kit brake master cyl , front brake pad , cable parking rear , cable parking front , rear brake shoe , wheel cyl assy , clutch plate , pressure plate , clutch relase bearing , clutch master cyl , clutch sleeve cyl , pipe flexible clutch , hose readiator inlet , hose radiator outlet , fuel filter element , fuel pump , front lower ball joint , front upper ball joint , wheel bearing front , spring lock washer , bush front road spring , bush rear road spring , spider bearing , bush for shock absorber , oil filter , air filter , rear oil seal for gear box , oil seal tfr case , hose pipe

CTN :45117838

09 Jun, 2026 NA

Bokaro - Jharkhand

Tender For supply of gear case assembly for wap4 & wag7 locos provided with hitachi tm for hs15250a to clw's drg. no.- 05/1/13/166 (alt.-15) and modified spring loaded oil filter cover to cee's drg. no.- loco/3/gp/064. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45110709

15 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond.& u/s diesel/emu/c&w/lhb, equilising beam, buffer, ac loco components such as tooth gears, crank shaft, brake disc, pinion, injector, gear wheel, cylinder liners, grease cup, alternator fan cover filter assembly, cattle guard, sab air brake components,air brake cylinder components, shock absorber, cattle guard, linear,traction motor spare parts, dust collector, motorman driver seat base with bend, hp cylinder rail guard, outer/inner sleeves of bearing bolts& nuts, air filter, damper, lube oil filter, tiny springs,rotor, anchor link scrap, sab components, cutoff angle cock, control arm upper, ca lower, traction rod, anti roll bar assembly, axle box components, gears, brake disk, leaf spring, carrier assembly, bearing bolt, centering device, fork eye, coupler sleeve, air pipe assembly, break shoe bolster link, hoop coupler, parking break assembly,erclips,primary and secondary springs,footsteps,bolster hanger, dust guard, wearing plate, compensating ring, impeller, inner hanger, safety strip, iron bracket above transformer, brake gear components, spring plate, coupler sleeve, brake hanger, yoke lead, coupler bearing, coupler rear plate, coupler clearance plates, wearing plate, brake beam, dust covers, collar, dashpot top, protective tube, gear case vocer, side bearer cover, pins for hanger, machinery items cut pieces, shock absorber, nipplers, cutout cocks, etc., tm pinion, tm parts as holder plate and end shield, axle box parts as axle box cover,boldter,oilcup,angles,equilising stay,pipes,nosepad,lsbeam,cibrakeblock , automobile parts,silentblock,impeller housing,cowl, axle guide and racer, traction link, the bar, traction housing,brake hangar, pull rod, slack adjuster, knuckle, clevis, screw coupling, cbc coupler and parts, fuffer, cattle guard, labyrinth, bearing for axle box, traction motor and aux motors, damper, sand box, sand ejector, sand pipe, foot step, sand ejector., angle cock and ferrous couplings, lathe machine head, junction box, cutting ferrous, angles, rod, ferrous heater coils, ferrous lamp pipe, transformet brackets, oil lubricator for suspension bearing, lid for gear case, linear, push rod &gudgeon pin, compressor, hood with impeller,ocb ducts, labyrinth, end frame tamper, hanger link, cylinder linear, oil dispersive, axle box cover, servo motor, striker casting with grease adherings(diesel), impeller, guard, compartment sliding doors, compensating ring, end sheild, cartridge with nu bearing,pipe, drum,hoist, gear, impeller, eot crane wheels, eot crane gears , side rod, pull rod, pinion wheel, pull lift chain, door closer, emu coupler,inter cooler, engine head, covers, dooms, pipes, tank, front cover, rear cover, hand rail, after cooler, cylinder body, spring piston, holder plate,sand box, labyrinth, lhb bearings, outer bearing covers, end shield, piston trunk, adjusting rod, palm pull rod, control arm, dbr rf boxes,hoods, brake hanger, brake hanger with head, brake head & semi permanent coupler and parts, bmbc components, bend cover, inspection cover, centrifugal dust collector, cut off angle cock, safety rod, racker arm, valve plate, cylinder bore, bearing cover, emu sliding door, silencer, racer, raiser, bellow plate, door operating cylinder scrap, msu components scrap, labyrinth &pinion shaft(diesel), compensation ring, buff gear, hood with impeller, ront fork complete housing, lb spring set scrap, stator w/o coil, contering dis, anger link with or w/o silent block, oil cup and all other scraps released from diesel / ac loco/emu/c&w/lhb components and all other ms/ci with/without minor non ferrous attachments in as is where is condition. pl no. 98050126. custodian: cdms-rsf-gsd-per. note: 1) cutting permitted to loadable sizes only. 2) during delivery if any major non-ferrous items found the same should be handed over to custodian. 3) loading by crane / jcb is also permitted. location: a row bin 1 & 2

Central Government / Public Sector

CTN :45084377

18 May, 2026 NA

Vijayawada - Andhra Pradesh

Tender For auction sale of others - 700hp demu dpc-vijayawada-plno-98112326-(hsn -86079100). cond and u/s under /aged 700hp demu dpc no:15033, 15034 of dls/bza. consisting of engine block complete, ventilation fan with motor, radiator fan with motor, radiators with expansion tank, hydralic pump, hydralic oil tank &oil cooler, fuel tank, muffler tank with exhaust/bellows, , engine block bed, turbo super chargers, air brake system valves(a9, sa9, c2, c3w & feed valve),a9, sa9, c2, c3w, feed valves. main reservoirs, auxilary resrvoirs, wiper motor&arm assemble with opening knob, air compressor trc 1000b, parking brake magnetic valves, horn flutes with operating valves, modified abd valves, angle cut out cocks, mr safty valves, dead man relay vlves, traction alternator, traction motors with nose caps, main rectifer assembly, bl box, 100 v gp relays, 100v auxiliary alternator-18.5kw, regulator rectifier assembly(rra) & blower motor, master controller , bl box,, 100v gp relays, electro pneumatic contractors, em contractors, 2 motors reversers, speed sensor & indicator assembly, engine starting &control pannel, head light unit, flasher light unit, dc-dc converter, 8v 450ah lead acid batteries, 6v batteries. truck assembly, axle box with bearings,buffer complet, schaku coupler assembly, , brake cylinders, wear pieces, gear case assemblies, 24b/charger alter nator, 24v self startrr, cable, control wiring lumpsum, actuator, fsd, driver cab fan, brass bearings, cntre pivot pin brass bush, etc.the all above parts ( except rc items) contains- ferrous-93162.98kg,,copper-5320.34 kg, brass-834.8kg, aluminium-1656.8 kg,stainless steel-1900kg, wood-1000kg. total qty-103.875mt. ( except rc items). rc-items 1). wheel set with bull gear-08 nos, 2) buffer complete-08 nos, 3) shaku coupler assembly-02nos/sets, , 4) brake cylinders -08 nos, 5) .8v 450ah lead acid batteries- 06nos, 6) 6v batteries-38 nos. the above dpc s are available inside the compound of dls/bza. delivery on lot basis. ds-8.no s-236190001/2. dt.07/04/2026.. ( in this dpc no:15033, bl box -01 no, not available). .note-1. rc items should be handing over by the purchaser before effecting the delivery.2) while cutting processes purchaser has to stock the similar type of material in the seperate places in a heap. purchasers shall visit the lot for physicall inspection of the material and site before bidding in e-auction. note- cutting is permitted for dismanlting/loading purpose.

Servo Oil Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector