Latest sewage pump house repair Tenders | Government sewage pump house repair Tenders

Central Government/Public Sector

CTN :45036879

21 May, 2026 NA

Vadodara - Gujarat

Tender For brc division:- hiring of diesel pump to drain out rain water/sludge/mud from surrounding area of various locations of limited height subway/ level crossing/ road under bridge/ railway colony/ railway station/ railway yard/shed etc under the jurisdiction of sr. den(n)brc.

Central Government/Public Sector

CTN :45015554

09 May, 2026 2.93 Lacs

Brajrajnagar - Odisha

Tender For dismantling of old pump shed and re erection at new location for pump maintenance at quarry, lajkura ocp, ib valley area.

Central Government And Public Sector

CTN :45036968

29 May, 2026 NA

Nagpur - Maharashtra

Tender For electrical work for :(a) construction of cover shed improvement of drainage system, cross drainage and repairing of approach road along with cover shed at lhs tt-19 under the jurisdiction of aden/tmr. (b) proposed construction of cover shed with pump and sump at rub-tt-06 under the jurisdiction of aden/tmr. (c) construction of cover shed etc. at lhs tt-10 under the jurisdiction of aden/tmr.(d) repairing of approach road of lhs-528 with construction of cover shed and cross drainage under the jurisdiction of aden/tmr.

Central Government And Public Sector

CTN :45036970

29 May, 2026 NA

Nagpur - Maharashtra

Tender For electrical work for :(a) provision of cover shed with lighting arrangement at lhs 555 at km 1101/5-7 between chcr-sal section under the jurisdiction of aden/tr./ngp. (b) provision of covershed with lighting arrangement at lhs no 547 at km 1083/27-29 between khat-rrl section under the jurisdiction of aden/tr/ngp. (c) provision of cover shed with lighting arrangement at lhs 5krd/31 between kav-krd section under the jurisdiction of aden/tr./ngp. (d) provision of cover shed with lighting arrangement at lhs 8krd /7-9 between kav-krdh section under the jurisdiction of aden/tr./ngp. (e) provision of cover shed with lighting arrangement at lhs 569 mehandibag lc on ngp side & kav side at km no 1126/28-30 at lhs 569 mehandibag lc no itwari dahibazae side & ettabhatti chowk side at km no1126/28-30 between kav-krd section under aden/tr./ngp. (f) repairing of approach road of lhs-541 with construction of cover shed and cross drainage under the jurisdiction of aden/tmr. (g) construction of cover shed, drainage etc. at lhs-526 under the jurisdiction of aden/tmr. (h) construction of cover shed with pump and sump at lhs-525 under the jurisdiction of aden/tmr.

CTN :45006399

18 May, 2026 5.09 Lacs

Kheri - Uttar Pradesh

Tender For lot 02 pump no. 02 par tin shed ka nirman karya

CTN :44969592

02 May, 2026 NA

Panvel - Maharashtra

Tender For supply of electricla spares and supplies - 3.7 kw motor rewinding, 4-way jb installation with support — 400w light for planning &, store area, led lights 400w installation with support — planning & store, area and other locaiton as advised, 4c × 4 sq.mm cable laying — mcc to commercial shed, loading/unloading boom-a lcs, conveyor boom-a motor,, bypass conveyor boom-a motor, bypass conveyor boom-b, motor, conveyor boom-b motor and other locaiton as advised, 3c × 2.5 sq.mm cable laying — mcc to commercial shed:, conveyor boom-a lcs, bypass conveyor boom-a lcs, loading &, unloading boom-b lcs, conveyor boom-b lcs, bypass conveyor, boom-b lcs and other locaiton as advised, 75 × 50 mm cable tray angle & support — commercial shed, loading & unloading boom, 4c × 16 sq.mm al cable laying — storage shed du new motor, and other locaiton as advised, 4c × 1.5 sq.mm cable laying — filling shed du new lcs, mcc for, new purging unit, valve changing shed to mcc for new valve, changing machine lcs, dpt shed to mcc for new valve, changing machine lcs, 4c × 2.5 sq.mm cable laying — mcc to 24-head carousel, earthing relay, mcc room to 48-head carousel earthing , to 12-, head carousel earthing, 2c × 1.5 sq.mm cable laying — lpg pump house jb to lcs &, instrument for lpg pump, 12p × 1.5 sq.mm cable laying — lpg pump house jb to jb, instrument for lpg pump, 4c × 4 sq.mm cable laying — lpg pump house to mcc for lpg, pump lcs, 4c × 4 sq.mm cable laying — filling shed to mcc for conveyor, dus, earth pit installation — commercial shed (earth digging, gi pipe, fitting, chamber making, gi busbar, chequer plate frame &, chequer plate), earthing strip laying 50 × 6 mm — commercial shed earth pit to, 47.5 kg filling scale, platform structure — dismantle, filling shed near 24-head, carousel, weight scale unit stand & base frame fabrication & installation, — commercial shed, 4c × 16 sq.mm cable laying — valve changing shed to mcc for, new valve changing machine motor, dpt shed to mcc for new, valve changing machine motor, storage shed to mcc for new, du motor, lpg pump house telephone shifting & cable laying, cable tray 75 × 50 mm laying with angle support — commercial, shed, valve changing shed, storage shed, ms plate 1500 mm × 1500 mm × 6 mm modification &, installation — commercial shed hydraulic jack, lightning arrestor height extension for lps (tt gantry rooftop /, filling shed top), new lightning arrestor installation for lps (filling shed &, commercial shed top), earthing strip dismantling & shifting 50 × 6 mm for earthing grid, msv area / lpg pump house manifold & msv manifold /, planning room / storage shed), earthing strip installation 25 × 3 mm for pipe-end flange (receipt, station fencing — all areas / tt parking area fencing / pump, house manifold & msv manifold), hydrant monitor height extension — dismantling and, installation, pipe cutting and welding with flange (tt parking, area / commercial shed loading and unloading), hydrant monitor structure and platform with railing shifting,, fabrication and installation (tt parking area), hydrant monitor railing fabrication and installation (near, counting platform / near lpg pump house / msv area), gi fencing fabrication and installation (3 m × 2 m) — near, counting platform, earthing strip laying with clamp & fabrication 25 × 3 mm (lpg, pump house shed roof to bottom and other locaiton as advised), water pipe 1" line installation with fitting (commercial shed, composite cylinder area), ovcm vent pipe 1" line modification with flange joint (filling, shed), sprinkler pipe 2" line cleaning & modification with flange joint, (msv top area), commercial shed evacuation — vent pipe 1" line modification &, installation with flange joint, conveyor and gi pipe dismantling work — length 45 mtr., (commercial shed valve changing shed connecting platform), platform installation for valve opening of cylinder (filling shed), stand fabrication &

CTN :44969627

02 May, 2026 NA

Panvel - Maharashtra

Tender For supply of mechanical spares and works - 1" u clamp bolt, 1" union, 1"x6m jindal gi pipe, 1.5" barrel nipple, 1.5" brass ball valve, 1.5" gi elbow, 1.5" gi tee, 1.5" gi union, 1/4x12 pu connector, 100x75 allen key bolt, 10mm drill bit, 10x75 gi nut bolt washer, 16mm tap, 16x200 anchor fastener, 212 bearing, 220 gear oil, 25x5 ms flat, 2.5" gasket, 2.5mm ms plate/17 sheet, 2500x470x50 water drop tray, 300x25x5mm ms flat, 3mmx4ftx8ft ms plate, 4x8x5mm acrylic sheet, 5/8x6 ms nut bolt with washer, 5mmx5ftx8ft ms plate, 6 inch bench vice, 6mm hex lock nut with washer, 6x65 allen cap screw, 8x25 bolt, 8x75 bolt, allen m10x75mm hex central column, ambika o ring, appu cake 10 kg event, barrel hand pump, bearing bush, bearing pin, brass bush 1/2x1/4, cake 1 kg for event, clutch drive, cylinder transportation bangalore/ram sir, df oil, momento for events and visitors, dpt conveyor load head, dpt conveyor load head hook, dpt conveyor overhead load head, dpt conveyor u clamp head, dpt shed air compressor local box, festo cylinder 40/300, file 6 inch, gas cutting torch, gasket 48 central column, gd lower bell, gear and shaft 4 inch, gi elbow 1", gi elbow 1.5", gi elbow 1x1/2", gi long bend 1/2", gi nipple 1.5"x2", gi nipple 1.5"x4", gi pipe 1.5" jindal, gi reducer 1x1/2", gi reducer tee 1x1/2", gi reducing elbow 1x1/2", gi saddle cleat 1.5", gi sheet 4x8x1mm, gi socket 1", gi tee 1", gi tee 1.5", gi union 1", gi union 1.5", gm ball valve 1.5", gm float valve with ball 1 inch, gm nrv horizontal 25mm, gm nrv isi screwed 1.5", ht full threaded rod 1m, ht lock nut 16mm, ht nut m16, hydraulic 68 oil, hydraulic hex nipple, hydraulic hose 3/4"x1m, hydraulic hose pipe, hydraulic jack 25 ton, ice pick, joy l150 coupling, l95 coupling with bore, lerc cylinder courier charges bangalore, m seal, metal gasket, ms elbow 150 class, ms reducer 150 class, ms sch 40 b/w elbow 50mm, ms sch 40 reducer, ms socket forged 3/4", nilkamal pallet trolley, nut bolt 6x20, nut bolt 8x40, orange helmet karam, ovcm machine cylinder new, ovcm machine cylinder rod modification, ovcm shaft length work, pneumatic long head silencer 3/4", polish paper, ps paper, pu connector 1/2", pu connector 1/2"x12, pu connector 1/2x1/4, pu connector 1/4x8, pu connector 3/8x8, pu pipe 8mm, pump motor shaft straightning and impeller repair, quarter pin, rubber hydro testing seal, rubber sheet 5mm, rubber washer o packing, sealing unit hose pipe ss grade 2m, seamless pipe 50nb sch 40 js, skf bearing, skf bearing 32206, skf bearing 6012, skf bearing 6024, skf bearing 6026, skf bearing 6303 zz, skf bearing 6304 2z, soap, spider l95, ss ball 150mm od, ss ball valve 1/2" threaded, ss blind flange 6 inch, ss cfb ball valve 1.5", ss cfb ball valve 2", ss nipple 1.5"x6", ss nipple 2"x6", ss rod 8mm, ss sheet 4x8x1mm, ss sheet 4x8x3mm, ss water bottle, sumo o ring, t 8mm, tap handle, taparia 450mm adjustable pipe wrench, teflon trolley wheel 6 inch, tyre coupling, v seal 16/24/5, v seal 22/16/4, washing unit sprinkler, lpg conveyor chain (carbon steel), solenoid valve 1/2" 24v dc, ptfe thread sealant tape 12mm, pressure gauge 0-10 bar 63mm, temperature gauge bi-metal 0-120c, limit switch conveyor roller type, proximity sensor inductive 12mm, stud bolt m20x100 ss316, hex nut m20 ss316, copper crush washer 1" lpg rated, teflon bush 50mm od, nylon roller 100mm dia, torque wrench 1/2" dr 40-200 nm, chain block 2ton, old head guide rod supply, media converter, omron smps, wire rope sling 5t 2m, drill machine check nut, jk drill bit high speed, 4' polish wheel, 10x45 alenkey nut bolt 48 corsol, tube(pu) od4 (blue), tube(pu) od6 (blue), tube(pu) od8 (blue), 1 1/4 5/2 single ext. pilot valve, 1/4 5/2 double ext. pilot valve, or valve g1/4

CTN :44771599

27 Apr, 2026 10.43 Crore

Mandi - Himachal Pradesh

Tender For sh construction of gi sheet cover shed for 2 nos fast charger , dug, warehouse construction of accommodation for office store and pl interlocking paver flooring 100mm thick in the yard of diesel pump sauli khad at mandi etc - development of civil and electrical charging infrastructure for operation of electric buses in the state of h.p. at workshop mandi, distt. mandi (hp) ( sh: -construction of g.i. sheet cover shed for 2 nos. fast charger + dug+ warehouse), construction of accommodation for office, store and p/l interlocking paver flooring (100mm thick) in the yard of diesel pump sauli khad at mandi, up-gradation of divisional workshop mandi : p/l r/wall & cutting in unsed land etc., dismantling in m.t. office, gear section, j.t.o. office, carpenter room, tyre plant & workshop shed, c/o new workshop, tyre plant toilet, m.t. office and workshop yard etc., c/o septic tank, soak pit and other minor work etc.) (under ridf xxx)

Central Government/Public Sector

CTN :44747515

18 May, 2026 NA

Delhi - Delhi

Tender For corrigendum : supply of de watering sewage pump 1hp, capacity submersible type suitable for operation on 230v 50hz single phase ac supply material required for train set depot shed. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44966963

06 May, 2026 4.03 Crore

Hyderabad - Telangana

Tender For auction sale of plant and machinery - plant & machinery like drill machine magnetic core cutting, welding machine annual rate contract portable, vaccum distillation unit, air compressors, effluent treatment plant, drilling machines, electrical equipment, diesel generators, angle grinders, hydraulic press brake, mechanical shearing machine, jigs and fixtures, angles punching machines, band saw machine, steel straightening machine, white fume extraction system, angle punching marking and shearing machines, stamping machines, cnc machines, bending furnace, multi-purpose hydraulic machine, process tank frp, acid fume extraction system, electronic weighbridge, disc marking /angle punching, marking and shearing cnc lin, beams drilling and sawing angles, for cut size plates, semiautomatic ficep/model frvl 200, tank galvanized, zinc tank, acid pickling tank, suvs/cars/two wheelers , eot crane, hydraulic mobile cranes, double girder cranes, hydra, control panels, cylinder trollies, mono block pump sets, office equipments, raw material and finished products, shed, fabrication shed / ms structure with profile sheet roof and galvanized plant shed etc.

Sewage Pump House Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector