Latest sewer pump Tenders | Government sewer pump Tenders

Central Government/Public Sector

CTN :45544682

06 Jul, 2026 NA

Palakkad - Kerala

Tender For corrigendum : supply of submersible sewerage pump set of 2hp, suitable to work with single phase (230v, 50hz), with head range: 6-15 m, discharge capacity: 500 to 200 lpm, with float switch. warranty: minimum 1 year. [ warranty period: 12 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45743916

06 Jul, 2026 NA

Palakkad - Kerala

Tender For supply of submersible sewerage pump set of 2hp, suitable to work with single phase (230v, 50hz), with head range: 6-15 m, discharge capacity: 500 to 200 lpm, with float switch. warranty: minimum 1 year. [ warranty period: 12 months after the date of delivery ] ]

corporations/Associations/Others

CTN :45729054

13 Jul, 2026 18.50 Lacs

Villupuram - Tamil Nadu

Tender For providing new 300mm di sewerage pumping main line and erection of new sewage non-clog pump 20 hp near military canteen pumping station in villupuram municipality.

State Government

CTN :45720726

15 Jul, 2026 3.50 Lacs

Satna - Madhya Pradesh

Tender For materials for the sewing industry (section 02) - paper tape , welding rod , nails (nos. 14, 17, 20) , yellow clay, chalk clay , plastic cane (for chair weaving) , chandras (shellac resin) , nc thinner , sandpaper (4-inch) , turpentine oil , paint (all colors) , water-based paint (all colors) , oil-based paint (all colors) , brush , brush , saw , triangular file , plywood (12 mm) , plywood (18 mm) , plywood (8 mm) , plywood (6 mm) , sunmica (1 mm) , sunmica (0.8 mm) , iron angle, iron strip , metal cutting blade , metal cutting blades , nuts, bolts, and washers (all sizes) , foam (3-inch, 32-density) , foam (2-inch, 32-density) , foam (1-inch, 32-density) , sofa fabric/rexine , grinding wheel , putty , brush cutter (circular blade) , gi wire , broom sticks , adhesive (sr 505) , welding goggles (black/clear) , measuring tape , drill bit , wooden block/batten , teak wood , acacia wood , sheesham wood , firewood , sealer , wood touch-up/finish , sandpaper , electric planer , c-clamp , bench vise , hand drill machine , compressor gun , compressor hose , planer machine molding die , sewing machine oil , nylon shirt buttons , hand sewing needles , sewing machine needles (10 pieces per packet) , sewing machine treadle/pedal , tailor's chalk , thread reels , amela machine bobbin case , sewing machine needle plate , scissors (size 08, 10) , sharpening stone , sewing machine , overlock machine , embroidery threads , embroidery frame , macramé cord (cotton, polyester, nylon, jute) , poly master , tree rope , stapler pins , white paper (80 gsm) , laser paper (green, 80 gsm) , white paper (68 gsm) , white paper (68 gsm) , ruled paper (68 gsm; ream of 1000 sheets) , ruled paper (68 gsm) , white paper (57 gsm) , brown paper (80 gsm) , card sheet (165 gsm) , cardboard sheet (no. 32) , rin/surf excel laundry soap , coating , fevicol , winding thread , winding cloth , fount solution , brown tape , screen printing ink , decoter , german sponge , reducer , winding paper , synthesizer , yellow envelope paper , stapler gun , winding paper , colored paper (70 gsm) , annual contract section , picking wall fiber , pickers , ratchet catch (leaf set) , pressing cam lever lr-101 , wooden steel (no. 29) , wheel gear 14t (no. 62) , bevel gear , worm wheel stud , ratchet catch lever , buffer soldering bracket , buffer strap (leather) , stick cap , bearing , ratchet wheel , warp weaver , worm , parachute rope , fine belt , picking stick , tariff wheel , handloom pickers , fast dyes (for fabric) , powerloom steel reed , yarn 2/40s on cone (coloured/white) , yarn 6s on coloured cone , coloured wool , yarn 2/60s on cone (coloured/white) , jute fabric , yarn 6s on cone , handloom reed (no. 12) , warping machine brake belt (leather) , dari beater/comb (wooden) , emery strip , warp frame hook set , pick/bobbin filling rod (handloom) , cast iron welding rod , temple rod/cover , weft filling needle/hook

Central Government/Public Sector

CTN :45713879

20 Jul, 2026 NA

Jorhat - Assam

Tender For repairs to compound wall, fencing and gate with connected items in domestic area and omq area at afs under ge (af) jorhat - demolition of brick work built in cement mortar of any description complete all as specified and as directed., m&l for brickwork (old size) with sub class b bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed., all as per serial item no. 2 here-in-before but except bricks, using old serviceable brick as retrieved from demolition.note : old serviceable bricks obtained from serial item no. 1 above shall re-used., taking down cement plaster on brick or stone or concrete surfaces of walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed., m&l for rendering 15mm thick on fair face of brick works or concrete surfaces of walls with cm (1:4), finishing the surface even and smooth without using extra cement complete all as specified and as directed., m&l for preparation of new plastered surfaces of walls and applying two coats of cement base paint over and including one coat of alkali resistance primer complete all as specified and as directed., demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed., m&l for plain cement concrete (1:2:4) type b-0 (using 12.50mm graded stone aggregate) used as in benching and coping including necessary formwork complete all as specified and as directed., m&l for brickwork with sub class b bricks, straight or curved on plan to any radius in half brick thick walls, built in cm (1:4) complete all as specified and as directed., m&l for dismantling posts or struts (wood, steel or rcc) any section, including taking out embedded portion and making good to disturbed ground surfaces complete all as specified and as directed., m&l for plain cement concrete (1:3:6) type c-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete, etc. complete all as specified and directed., s&f hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing, etc. wind ties for roof including securing bolts posts and struts in fencing of size 65x65x6mm including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to fe-290 gde e-165 complete all as specified and as directed., dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed., s&f 11mm to 15mm dia of shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and onehexagonal or square nut, but length of bolt exc. 5cm but n. exc. 10cm complete all as specified and as directed., excavating in post holes (or similar holes) each n. exc. 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exc. 50m and making good surface as in soft/loose soil complete all as specified and as directed., m&l for preparation of new steel and iron surfaces of any description over 10cm width or girth not otherwise described for and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and as directed., m&l for mild steel tmt bar 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends binding wit

CTN :45623450

02 Jul, 2026 NA

Saharanpur - Uttar Pradesh

Tender For corrigendum : supply of submersible sewerage pump

CTN :45635687

06 Jul, 2026 21.46 Lacs

Pratapgarh-Up - Uttar Pradesh

Tender For corrigendum : supply of submersible sewerage pump

CTN :45478155

01 Jul, 2026 NA

Vidisha - Madhya Pradesh

Tender For corrigendum : cs/rmo/2026/2089-90/ac/washing - items, ac compressor 1-5 ton, ac compressor 2 ton, ac outdoor gas bal, ac indore fan motor, ac outdoor fan motor, ac condensers, ac gas charging, ac condenser outdoor mesh, connector ac, ac sensor indore, ac running capacitor, ac service charge, water cooler fan motor, water cooler compressor, water cooler condenser, water cooler mash, water cooler riley, water cooler over load, water cooler running capacitor, water cooler service charge, water cooler gas filling charge, washing machine spine timer, washing machine wash timer, washing machine wash motor, washing machine spine motor, washing machine bello, washing machine gear box, washing machine capacitor, washing machine service charge, refrigerator compressor, refrigerator rile, refrigerator overload, refrigerator thermometer, refrigerator senseor, refrigerator wall, refrigerator fan motor, refrigerator bimetal, refrigerator time, refrigerator pcv, refrigerator fuse, refrigerator door swath, refrigerator gas charge, refrigerator service charge, ac pcv, ac stand for spilit ac, ac stand for window ac, copper pipe for spilit ac per feet, copper pipe for window ac per feet, spilit and window ac remote

Central Government/Public Sector

CTN :45718683

20 Jul, 2026 1.76 Lacs

Ganjam - Odisha

Tender For supply of submersible sewerage pump

State Government

CTN :45704964

30 Jun, 2026 NA

Ambala - Haryana

Tender For cc interlocking paver blocks providing and laying 100mm thick factory made cement concrete interlocking paver block of m -35 grade made by block making machine with strong vibratory compaction, of approved size, design and shape, laid in required colour and pattern over (bis 15658:2006) and including 60mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of engineer-in-charge. ,providing, lowering, laying in trenches, aligning, fixing in position and jointing ductile iron (di) isi marked k-7 grade sands pipes as per is:8329-2000 (amended up to date), with internal cement mortar lining for potable water with rubber ring (epdm/sbr) joints as per is: 5382-1985 (excluding special accessories) complete including all material, labour, hydraulic testing and commissioning as per technical specifications and as per direction of engineer. , earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 1. all kinds of soil. ,demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. 2. nominal concrete 1:2:4 or leaner mix (i/c equivalent design mix) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 2. 1:2:4 (1 cement : 2 coarse sand (zone-iii) : 4 graded stone aggregate 20 mm nominal size)

Sewer Pump Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

State Government

Central Government/Public Sector

Central Government/Public Sector

State Government