Latest sewing machine motor Tenders | Government sewing machine motor Tenders

State Government

CTN :45313570

09 Jun, 2026 NA

Ranchi - Jharkhand

Tender For e-quotation for seeking firm rates for non-schedule items for preparing estimates. - s/i/t/c of new 80 hp vt pump set, supplying,installation,testing and commissioning of vt pumpset (confirming to is1710:2021 standards) with 35 ft suitable size ms column pipe assembly in random length of 5 ft.(make-jyoti/wpil/kirloskar) with ss/bronze impeller capable to discharge 216 m3/h against a total head of 68m coupled with vertical solid shaft tefc ie3,ip55 type squirrel cage induction motor (make-siemens/crompton/abb) operating on 3 phase 50 hz,415v+- 10% supply and having speed 1400-1500 rpm (bhp of motor should be 10% more than that of pumpset including cost pof supplying,fitting and fixing of all required accessories, repairing of 80 hp vt pump set at raw water, supplying all labour tools and tackles for taking out the 40hp vt pump set with bowl assembly, column pipe and line shaft etc., cost towards dismantling of complete bowl assembly., cost towards repairing and fitting the parts of vt pumpset as per requirement (works as complete overhauling of the pump) such as:-1.machining/lathe work 2.changing ss top shaft,line shaft(2 nos of 5 feet) of and bottom shaft2.repairing of bowl assembly and impleller3.supplying and fitting c.l spider bearing with rubber cut less bush-4nos4.supplying and fitting of worn-out nut-bolts,bolt-nut washer,gland body bush machining,other machining works,etc as per requirement, complete assembling the pump set and lowering including supplying all petty materials., cost for supplying and installation of required accesories for repair and maintenance of motor control panel such as:-150 amp contactor-2 no (for 1 no starter)160 amp,breaking capacity -36ka mccb 1 no56-90 a electronic overload relay-2 nostimer-2 nosvolt meter 1 nosamp motor 1 nospilot lamp 6 nosselector switch 4 nossingle phase preventer 2 nos[ all accessories of reputed make]with complete internal wiring with suitable size of copper wire and testing on load., repairing of 30hp c/f pump sets at clear water, cost for dismantling of 30 hp c/f and pump inspection,changing of its damaged parts such as:-key-01 no, gland tightner -1 set, gland tightner stud-2 nos, c.i bearing housing with cap -1 set, ball bearing 6306 (skf)-2 nos, grease, gland packing,maching of the pump parts as per required etc all complete and testing on load etc., cost towards complete repairing of motor control panel starter 30hp cf pump set opening and changing of damaged parts such as 1.mccb - 50 amp,25ka,3pole-2 nos (for motor backup protection),mccb -100 amp,50ka,3pole-1 no (main mccb)2.overload relay 26-40 amp-1no3.star delta timer-1no4.digital volt meter,ampere meter,three pahse indicator lamp,push button on/off,on/off/trip indicator,wiring,etc as per required, repairing of 15hp c/f pump sets at clear water, cost for dismantling of 15hp c/f and pump inspection,changing of its damaged parts such as:-key-01 no, gland tightner -1 set, gland tightner stud-2 nos, c.i bearing housing with cap -1 set, ball bearing 6306 (skf)-2 nos, grease, gland packing,maching of the pump parts as per required etc all complete and testing on load etc., cost towards complete repairing of motor control panel starter 30hp cf pump set opening and changing of damaged parts such as 1.mccb -25 amp,15ka,3pole-2 nos (for motor backup protection),mccb -50 amp,25ka,3pole-1 no (main mccb)2.overload relay 20-25 amp-1no3.star delta timer-1no4.digital volt meter,ampere meter,three pahse indicator lamp,push button on/off,on/off/trip indicator,wiring,etc as per required

Central Government And Public Sector

CTN :45338386

08 Jun, 2026 NA

Bangalore - Karnataka

Tender For tefc foot mounted sq cage induction motor 30hp,415v 3ph 750rpm, class 'b' insulated, frame size 225m. suitable for fan application. mounting type v5. conforming to is:325 and ip 55. make: seimens, ngef, bharath bijlee, kirloskar, abb. warranty: 12months from the date of commissioning or 18months from the date of supply. [ warranty period: 12 months after the date of delivery ] ]

Central Government And Public Sector

CTN :45338387

08 Jun, 2026 NA

Bangalore - Karnataka

Tender For totaly enclosed fan cooled sq.cage induction motor 25 hp of frame size 200l, 6pole,class f insulated,415volts 3phase, foot mounted, minimum energy efficient ie-2 conforming to is 325 and ip55 latest. the tenderer is requested to enclose the technical catalogue along with supply. warranty: 18months from the date of delivery or 12 months from date of commissioning whichever is earlier. [warranty period: 12 months after the date of delivery ] ]

Central Government And Public Sector

CTN :45338388

08 Jun, 2026 NA

Bangalore - Karnataka

Tender For tefc sq cage induction induction foot mounted motor 25hp,415v, 3ph, 50hz ac,4pole,frame size 180m,class f insulation,duly s1,conforming to latest is 12615-2011,minimum efficiency class ie3 and protection class minimum ip55.makes:siemens,bharath bijilee,kirloskar,ngef,abb,alstom,cg warranty: 12 months from the date of commissioning or 18 months from the date of supply whichever is earlier. note: the firm shall confirm the terminal box position before supplying the motor. only authorized dealers/manufacturers to quote. [ warranty period: 12 months after the dateof delivery ] ]

CTN :45326588

11 Jun, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of laboratory equipment for civil and eee - constant head permeability test apparatus for soil &falling head permeability test apparatus for soil. as per annexure., function generator as per annexure., digital storage oscilloscope (dso) as per annexure., digital ic trainer kit as per annexure., ammeter as per annexure., voltmeter as per annexure., three phase induction motor with loading arrangement as per annexure., tachometer - analog as per annexure.

CTN :45332966

11 Jun, 2026 NA

Rourkela - Odisha

Tender For supply of electrician screwdriver thin stem insulated handle , electrician screwdriver thin stem insulated handle , knife double bladed electrician , neon tester , blow lamp brass , crimping tool , wire cutter and stripper , copper bit soldering iron , de soldering gun , contactor and auxiliary contacts , limit switch , rotary switch , relay cut out relays reverse current relays over current relays under voltage relays , pin type shackle type egg type and suspension type insulators , hydrometer , portable electric drill machine , load bank lamp or heater type , laboratory type induction coil , out side micrometer , knife switch dpdt fitted with fuse terminals , knife switch tpdt fitted with fuse terminals , earth plate , earth electrode , mccb , elcb , rccb , fuses , rheostat sliding type , capacitors , various lamps , bus bar with brackets , rubber mat , electrician helmet , safety belt , ohm meter series type and shunt type portable box type , digital multi meter , a c voltmeter m i analog portable box type housed in bakelite case , milli voltmeter centre zero analog portable box type housed in bakelite case , ammeter mc analog, portable box type housed in bakelite case , ac ammeter mi analog portable box type housed in bakelite case , kilo wattmeter analog , digital wattmeter , a c energy meter , power factor meter digital , frequency meter , magnetic flux meter , lux meter , tachometer , tong tester or clamp meter , megger , 3 point d c starter , 4 point d c starter , wheat stone bridge with galvanometer and battery , single phase variable auto transformer , phase sequence indicator , growler , ac starters , oscilloscope dual trace , function generator , soldering iron , temperature controlled soldering iron , discrete component trainer , linear i c trainer , digital i c trainer , electric induction plate , electric kettle , electric iron , immersion heater , a c ceiling fan and ac table fan , geyser storage type , mixture and grinder , washing machine semi-automatic , motor pump set , inverter with battery , voltage stabilizer , dc power supply , battery charger , current transformer , potential transformer , solar panel with battery , ink jet or laser printer , dc compound motor with starter and switch , thyristor igbt controlled d.c. motor drive with tacho generator feedback arrangement , thyristor igbt controlled a.c. motor drive with , electrical machine trainer , used dc generators series shunt and compound type for overhauling practice , motorised bench grinder , manual motor coil winding machine , ceiling fan coil winding machine , primary current injection set , stepper motor with digital controller , shaded pole motor , smart meter , ev charger , ev charger home , portable double telescopic ladder , 3 ph variac , rotary hammer drill 1 ph , lcr meter

CTN :45345848

08 Jun, 2026 4.83 Lacs

Ramgarh - Jharkhand

Tender For rewinding and repairing of 325 kw/435hp, 3.3kv 1490 rpm induction motor make gec sl no-183002/3 of bhurkunda colliery under barka-sayal area.

CTN :45327562

05 Jun, 2026 2.34 Lacs

Jammu - Jammu And Kashmir

Tender For repairs to 3.5 cusec discharge hc pump unit no 02, 75 hp 3 phase induction motor unit no 01 at lis badhayala chak and repairs to 250 kva electrical transformer with allied works at lis kah.

CTN :45327550

11 Jun, 2026 NA

Jummu - Jammu And Kashmir

Tender For providing of consumable material/spares for routine maintenance/ operation of 1000hp/750kw ht slip ring induction motors at tawi pump house, jammu. - providing of carbon brush holder assembly as per sample (an assembly comprises of 6 no. brush holders and 12 nos. carbon brushes of size 32x38x55mm) with tension springs and pin holding slots for different adjustment, having current carrying capacity of 650 amp, fabricated out of gun metal material for fitment to jyoti/ bhel make 1000hp /750kw slip ring induction motor installed at tawi pump house, jammu., providing of spare sets of copper carbon brushes of size 32x38x55mm for 750kw/1000hp, 6.6kv slip ring induction motor (1 set comprises of 12 nos. carbon brushes), providing of rubber bearings for 900 vm-2, 60 cusecs vt pumps as per sample casted out of superior quality rubber finished to the required size having size height 230mm, inner dia. 95 mm and outer dia. 125 mm with proper facing on both ends for proper fitment., ravi canal :- d-18 h/r, dol vijaypur. complete job.

CTN :45327575

06 Jun, 2026 NA

Jummu - Jammu And Kashmir

Tender For providing and fitting of deep groove ball bearing for driving end of 1000hp/750kw ht slip ring induction motor s.no. 134429 at tawi pump house, jammu.

Sewing Machine Motor Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government And Public Sector

Central Government And Public Sector

Central Government And Public Sector