Latest shackle lock Tenders | Government shackle lock Tenders

Central Government And Public Sector

CTN :40576357

16 Jun, 2025 NA

Multi City - Multi State

Tender For supply and installation of portable toilet having specification as per attached :- ms portable t oilet cabin (ews) of size 4'x4'x8'.5" which includes all necessary electrical fittings. *components* 1. main d oor - 1 nos - size 6.5'x2.5' *electrical fittings* 2. led light - 1 nos 3. bulk head door light - 1 nos 4. exhaust fan - 2 nos 5. switch & socket board - 2 nos 6. ewc commode with flush tank (parry ware) - 1 nos 7. wash basin with tap fittings (parry ware) - 1 nos 8. provision for 300ltrs water tank stand - 1 nos *fabricating spe cifications* 1. bottom frame - 100 x50 mm square pipes of m.s 2. stiffener bottom - 25x50 mm square pip es. 3. top frame - frame made of 25x50mm square pipes 4. stiffener top - 25x50 mm & 25x25 mm squar e pipes 5. side wall stiffeners - corners shall be of 25x50 mm square pipes & wall thickness of 50 mm 6. p aneling outside - specially corrugated 1.2mm thick sheet welded on ms frame's marked 7. internal wall pan eling - the paneling of side walls and roof shall be of 9 mm thick pre laminated particle board (or) mdf bo ard & all vertical and horizontal corners shall be neatly and smoothly finished with aluminum sections. 8. r oof outside - 1.2 mm thick ms sheet properly sloped with water tight. isi marked 9. bottom flooring - on th e bottom frame 18 mm thick bison panel i.e. cemented bonded fiber sheets shall be fixed by means of self- taping screw & 1.5mm thick pvc vinyl carpet shall be fixed on the panel. (100% water, termite & dimension al proof with vinyl carpet) 10. aluminum sliding windows - double shutter sliding aluminum powder coated windows of 1.2mm thickness with 4mm thick glass for all windows & canopy on the top of windows 11. mai n door - the door shall be of external opening type. made out of the same material as wall panels & canop y above the door. frame work by tubular pipe of 25x25 & the door interior shall be finished with same mat erial matching with that of the cabin interior. door with std hardware locks & handles 12. insulation - 25m m glass wool density of 32 kg/m3 with insulation for top & 12mm foam on side walls. 13. wiring - all wiring shall be concealed and shall be pvc insulated copper wires of isi quality, suitable for 240 volt, 50 hz single phase ac power supply with mcb protection. isi marked - light, fan - 1.5 mm thick cable - socket, ac - 2.5 mm thick cable - main supply - 4 mm thick cable 14. outside painting - all components are painted with a coat of primer & 2 coats of corrosion free paint i.e. synthetic enamel paint. 15. hooks - specially formed for easy lift & shift. ]

Central Government And Public Sector

CTN :40576572

12 Jun, 2025 NA

Bongaigaon - Assam

Tender For supply of centre pivot pin, shackle lock, lock pin for casnub -22 nlb & hs bogie. drawing - rdso dr g. no.- wd - 85079 - s/2, item -5, 7 and 8 alt. - 28. mat. spec. - as per drawing with latest revision and a mendments. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40576951

16 Jun, 2025 NA

Mumbai - Maharashtra

Tender For supply of set of cab door locks for ng loco. 1) cab door lock (l.h) dlw part no. 10632932, qty. 01 n o/set & 2) cab door lock (r.h) dlw part no. 10632933, qty. 01 no/set. suitable for cab doors which is ope ning inside. [ warranty period: 30 months after the date of delivery ]

CTN :40540705

27 Jun, 2025 NA

Pune - Maharashtra

Tender For supply of laboratory equipments and standards as per spec. no. hemrl/qard/spec/2025/lab equipments & standards - acid storage cabinet with exhaust system, capacity: 100-120 liter, qty: 01 no a. construction of cabinet should be minimum 8mm polypropylene panels, which can give protection against harsh acids, alkali and corrosion. b. there should have adjustable and reversible shelves and can be customized. c. the storage should be divided into two parts to store different acids. d. front door of the cabinet shall be in twin door design having glass panel. e. door hasp should accept padlock to achieve double locks and also have safety lock system. f. there should have circulating fans with air vents. , acid storage cabinet with exhaust system, capacity: 220-250 liter, qty: 01 no a. construction of cabinet should be minimum 8mm polypropylene panels, which can give protection against harsh acids, alkali and corrosion. b. there should have adjustable and reversible shelves and can be customized. c. the storage should be divided into two parts to store different acids. d. front door of the cabinet shall be in twin door design having glass panel. e. door hasp should accept padlock to achieve double locks and also have safety lock system. f. there should have circulating fans with air vents. , sample storage cabinet, capacity: 220-250 liter, qty: 02 nos. a. the laboratory sample storage cabinet should be made of pure stainless steel. b. there should have adjustable shelves and can be customized. c. should have double lock system. d. front door of the cabinet shall be in twin door design having glass panel. ?. should be workable within temperature range of 10-50c and humidity of 20-80%. f. door handles shall make of ss 304., glass membrane filtration assembly with three manifold system and vacuum pump & other accessories, qty: 02nos. vacuum filtration assemblies made of borosilicate glass that should be compatible with most organic solvents for solvent filtration purpose. b. funnel, receiver flask & filter support base should be made of borosilicate glass the filter support base design should have an integral vacuum connection located above the filtrate dip such that it can prevent contamination of the vacuum line from droplets. d. it should be three place manifold glass filtration assembly. glass funnel capacity: 300ml f. filter support base with sintered glass filter: 47mm. g glass receiver flask: i) 500ml-01 no, ii) 1000ml-01 no iii) 2000ml-01 no. h. aluminium clamp: 47mm i. effective filtration area: 9.6cm the filtration base should have a silicon stopper. k. all accessories should come with assembly. vacuum pump: , vacuum pumps are to be equipped with vacuum regulator to adjust vacuum. b. vacuum pump should have thermal protection device to shut off the pump automatically when overheated and resume working when temperature cools down. c. max. vacuum (mbar): 100 d. max flow rate (l/min): 17 e. motor rotation (rpm): 1450 , digital rotary shaker, qty: 02 nos. the rotary shakers comprises of shaking platform, speed regulator and timer to adjust duration of orbital motion. b. shaking platform should be made of ss 304 to avoid any kind of rust formation. clamps should be made of either unbreakable plastic or stainless steel d. the housing should be made with thick sheet of mild steel duly powder coated. motion: rotary motion f shaking mechanism: brushless motor used for shaking b digital lcd display with rpm controller provided in the panel. h over temperature alarm. speed (rpm): 20-200 accuracy: 1c k. volume capacity: should be of different sizes like as 16 x 250ml and 16 x 500ml. l platform dimension (inches): 18 x18 m. temperature control: electronic/automatic ceramic hotplate magnetic stirrer, qty: 06 nos. a. digital lcd display with back light. b. big size ceramic hot plate with flame protection and durability. e. heating and stirring can proceed simultaneously. d. temperature & stirring speed is stepless adjusted.

CTN :40537966

09 Jun, 2025 NA

Adra - West Bengal

Tender For supply of shackle lock for centre pivot of boxn wagon. drawing no. : rdso's drg. no. wd-85079 -s-2, alt. 27 , item no. 7. material and specification : is: 2004 :1991(rev. 3), class: 2 [ warranty peri od: 30 months after the date of delivery ]

CTN :40253141

09 Jun, 2025 NA

Bangalore - Karnataka

Tender For corrigendum : supply of biometric and smart card readers with built in controller , handheld portable readers biometric and smart card with built-in controller , swing gate barrier dual lane , swing gate barrier single lane , photo flashing solution at main gates during entry , em locks for single door with exit switch , emergency exit switch , biometric enrolment station , smart card personalization reader , web camera , signature pad with pen pen digitizer , multifunction printer , mifare 4k smart cards , server os with database package , network switch , cat 6 utp lan cable , power cable , conduits with accessories , integrated web based software , installation and commissioning , training , cost of optional items required

Central Government/Public Sector

CTN :40485851

07 Jul, 2025 NA

Dahod - Gujarat

Tender For supply of shackle lock to rdso drg. no. contr.-9404-s-08, alt.-12, item-2. & material to is: 200 4-1991 (reaffirmed-2018) cl-ii [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40501138

26 Jun, 2025 NA

Delhi - Delhi

Tender For supply of shackle lock drawing no.:- contr-9404-s/8, alt. 12, item no. 2 [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40485072

02 Jun, 2025 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of shackle lock & lock pin with split pin for center pivot pin suitable for casnub bogie to rdso drg. no.- wd-85079-s-2, item no. 7 & 8,alt. 24 or latest. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40462132

02 Jun, 2025 NA

Satna - Madhya Pradesh

Tender For supply of lock pin for shackle lock/centre pivot of boxn/bcn wagon to drawing no. rd so's drg.no.wd-85079-s-2, alt.27 or latest, item no. 8. material & specification: is:2004/1991 (rev.-3), class-3. [ warranty period: 30 months after the date of delivery ]

Shackle Lock Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector