Latest shackle strap Tenders | Government shackle strap Tenders

Central Government/Public Sector

CTN :45733184

08 Jul, 2026 NA

Multi City - Karnataka

Tender For auction sale of depot ferrous scrap - 98050126]scrap cond./released/unserviceable ms scrap such as cbc coupler bodies, angels channels, signal rods, dash pot, yokes, draft gears sets, ms sheets, winch for lc gate, lever lock, lever rods, pull rods, suspension tube, bracket cl, housing axle bearing, chequered plates, cbc operating handle, rail cutter, rel hook, anti roll bracket, dredger drum, chain, centering disc, ms liners, center pivot washer, center pivot ring, side frame key, adopter narrow jaw, anti roll bar, wear plate, adopter wide jaw, suspension rods ,equalizing stay, erc clips, rail flange, chain hook, rotary shield with bearings, sab parts, ls beam, hangers, brake levers, brake hangers, adapter broken, center pivot top, anvil, workout sab, plate screws, transformer body and its ms parts, knuckle, fabricated test rig, gear wheel, anchor link, brake beam cut parts, axle box housing, bearing plates, rivette, chair plate, ms bed plate, ms gauge tie plate, structure bar, ms tie plates, slide chaires, center pivot, tamping tools, jim crow, cribs, track machine parts, locking plate, operating handle, cbc lock, cbc yoke, lower spring sheet beam, rail tong, center beams, screw couplings, lower spring sheet beam, cut pieces of pipes, buffers, buffer plungers, buffer casings, draw gear hooks, iron rods, wire, bolt & nut and other items coming under ms scrap on as is where is condition is available under the custody of cdms 08 ward ap. note: 1.pick and choose of the material are not allowed. loading to be started from one end and to be ended on other end only.(loc:bin no. 121 at scrap yard)

CTN :45700223

07 Jul, 2026 4.07 Lacs

Latehar - Jharkhand

Tender For repairing fabrication of track frame idler assembly idler shaft and bushing track roller foundation of undercarriage assembly and repairing of lift cylinder assembly eye and link along with seal replacement and its refitment in dozer sl no 11900 unde

Central Government/Public Sector

CTN :45702760

03 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond. and u/s ferrous fabricated materials of ms/ci scrap in nature such as weld mesh, ms duct, anti slip arrangement, earthen bond, galvanized (gi) sheet, ms sheet of various sorts and sizes, blower rotary forging, liner, guide fixtures, side frame fixtures, trolley of various sorts and sizes, trolley wheel & frame, battery fixing iron tray, ms pipe, coach/wagon stand, conveyor belt, ferrous body of auto change over panel, wire mesh, emu coach cut parts, ferrous portion of cab window assembly, sign on iron stand,castiron tems,girder base with concrete adhearings,gearset,grill,vcb panel boxes,gipipes,nuts and bolts,angles,rails,panel boxes,fissureplates,wheels,cupboard, structural items, different type of packing channels, trolley, lat, coach cut up parts, head stock, ms tank, grill gate, rolling shutter,wheel with plate, bins,regulator empty box, dolley, fob fencing, corrugated sheets, rectangular square tube &galvanised sheets, bogie mounted brake beam,brake blocks, gi sheets, pipe,square &rectangular tubes,stair case and handle,ferrous body of various types of motor, angle and channel fabricated with nut, bolt with or without brick and concrete,ladder,plate,grill, barricade, bolts, nuts, tray under frame, cut rod, rails of various sorts and sizes with/without concrete/brick/mud adhering,cut rails or rails used in support structures, coach head stock, coach parts,battery tray, ladder, all types of trolley wheels with minor nfs attachments, screens, channel post, sheets, stand, track machine cut up parts, ms pipes covered with or without rope &with or without parts of rubber, dome, vrla rack, vcb in dismantled condition, vrla battery box & clamp, stand, dtmf way station equipment box, led line display board, hydraulic lifting table with available fittings, vrla battery empty container, bed/base plate, fabricated cut rods,gi pipes, ci pipes and fittings, ms plate, roofsheets, angle, plate, platform bench, spring plank, clamps, cabinet, ms grill, sheets, ladder, steel gate, trolley,ms water tank, fire tender tank,roof truss supporting columns,purlins, sand box, fencing, tl rod, vcb panel, train display board, battery stand, boards, tools box, empty regulator &empty battery container, cut rod, ticket punching cut parts, hand rail, fabricated post/pipe/rod, strips, hoods, impellor, base plates, meshes, battery box frame, grs box, control panel, fan down rod, ac window covers ,angle / channels with/without rails, angle of tld, rack, lt panels, ferrous electrical panel boxes,i beam,transmission rods,fissure plates, main switch panel board w/o nfs attachments, ebc & rbc frame &enclosure,emu sliding door, high beam, silencer, , garden light post, tap changer cover with fiber attachments, empty battery container, stretcher, cupboard, dust bin, iron step, empty rotary junction box, empty regulator box, iron metal box, air reserviour compressor cylinder of varous sorts & sizes, garden light post, stand, mdb w/o non ferrous attachments, st light tubular post, gi/ms window, luggage rack, ,bed portion of weighing scale l with or without any minor non-ferrous attachments and all other scrap excluding ms hand hold in fabricated nature of sorts and sizes full/broken with/without other fs/ci/gi fittings in as is where is condition.pl no 98050126. note:(1) cutting is permitted to loadable size and for heavy nature items only. 2) during delivery if any major non-ferrous items found the same may be handed over to custodian. 3) jcb/crane loading permitted. location: (1)behind a row bin 3&4, (2)near old e-ii ward annexe

State Government

CTN :45678444

01 Jul, 2026 NA

Birbhum - West Bengal

Tender For fixation of local market rate of material items for implementation of mgnrega schemes under rampurhat ll development block - technician, helper (technician), coolie, carriage of tar bitumen, carriage of stone aggregate below 40 mm nominal size, carriage of steam coal, carriage of stone aggregate 40 mm nominal size and above, 1st class picked jhama bricks(traditional), carriage of soling stone & masonry stone, coloured inter locking c.c. paver block, fine sand, silver sand, 1st class traditional bricks (kiln burnt), coarse sand, fly ash bricks(traditional), modular fly ash bricks, modular clay bricks, stone aggregate(single size): 40 mm nominal size, medium sand, water proofing materials, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), hire charges of 5 kva generator, hire charges of 3 kva generator, hire charges of monkey set, hire charges for 5 hp with operator,fuel and shifting etc all charges complete, surface vibrator, water tanker 5000 ltr. capacity, carriage of r.c.c. pipes 600,700,750 & 800 mm dia, carriage of r.c.c. pipes 900 mm dia, carriage of r.c.c. pipes 1000 mm dia, carriage of r.c.c. pipes 1200 mm dia, eucalyptus bullah (7.5cm -10cm dia), eucalyptus bullah (12.5cm -15cm dia), eucalyptus bullah (17.5cm -20cm dia), welding by electric plant, brick aggregate (single size):40 mm nominal size, moorum, carriage of carriage of moorum, stone aggregate(single size):63 mm nominal size, river bed material, fitter(grade1), brick aggregate (single size):50 mm nominal size, hire charges of shuttering plank (25mm-30mm thick) with prop including all fittings, hire charges of shuttering plank (25mm-30mm thick) without prop including all fittings, hire charges of shuttering plank (above 30mm-37mm thick) with prop including all fittings, thermocol 12.5 mm thick., polythene sheet (150 gm per sqm), nylon net, paddy straw, g i wire, stone boulder ( 225mm-150mm ), stone boulder( 225 mm above ), laterite boulder, carriage of cost of neelgiri/maxican grass truf sqm, wood dust, sal silliguri, sal malaysia, neem wood, other local wood, ordinary teak wood, sisu/gamar wood, local sal wood, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm), float glass sheet of nominla thickness 5.5 mm (weight not less than 13.50 kg/ sqm), float glass sheet of nominal thickness 8 mm (weight not less than 20.00 kg/sqm), bright finished or black enamelled mild steel screws 40 mm, bright finished or black enamelled mild steel screws 20 mm, bright finished or black enameled mild steel butt hinges 50x37x 1.50 mm, bright finished or black enameled mild steel butt hinges 75x47x 1.70 mm, bright finished or black enameled mild steel butt hinges 100x58x 1.90 mm, hydraulic door closer tubular type aluminium section body, brass 150 mm floor door stopper (0.357 kg), anodised aluminium hanging type door stopper, malayasia sal cleat, chromium plated brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever handles, frp composite door frame 66mm x 90mm, frp composite door frame 66mm x 70mm, 30 mm thick factory made glass fiber reinforced plastic panel door shutter i/c carriage, supplying,fitting & fixing of 2-track / 3-track aluminium sliding window, supplying, fitting & fixing of partly glazed partly paneled or fully glazed single leaf aluminium swing door, supplying, fitting & fixing of aluminium fixed partition wall of all aluminium sections, supplying solid flush type doors of commercial quality, white cement, coal tar, carriage of steel, r.c.c ventilator of 20 mm. thick upto 0.10 sq.m. area, r.c.c ventilator of 20 mm. thick above 0.10 sq.m. area, fan hook, chlorinated polyvinyl - chloride (cpvc) pipe 15 mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 20 mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 25 mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 32 mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 40 mm outer dia,

State Government

CTN :45586027

22 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For corrigendum : supply of the items stipulated in the bill of materials with specified specifications. - bosh - electrical drill and hammer drill with bit set, hammer drill concrete - bosch, key hole saw with complete set -4 (1"-6,2"-6,3"-6,4"--6) drill bit k4-6, k10-6), breathing apparatus set with spare cylinder, tent 180 with accessories, inflatable rescue boat with accessories -40hp obm, hydraulic jack 20 tons with ram set matching foot pump, life buoy, angle cutter 14", replacement diamond tipped blade for angle cutter 14"- 350mm, safety goggles, heavy duty working gloves, recipro cutting saw blade, recipro cutting saw blade(152mm), recipro cutting saw blade (130mm), extension cord reel (8mm,100mtr), working lamp with 50mtr lead(with 100w bulp), water tank 500 ltr, mega phone, led search light, led torch light with accessories (multi function), led head light, fire extinguisher portable, rope 10.5mm, 50mtrs, rope nylon 100 mtrs, carabiners, feet extension ladder (30 ft), heavy iron racks, hand saw (18"*410mm), hack saw frame 12" with blade, bolt cutter 30" (750mm), bolt cutter 14" (356.6mm), full body harness, rescue kit bag with accessories, multi purpose iron tool box empty, axe mate kit, rope manila, mfr box, sledge hammer (7kg), sledge hammer (10kg), fire axe, trolley for fiber boat - steel trolley, level 12" (spirit level 12" taparia), screw driver set (5-types), carpenter hammer 3", claw hammer (220gm,8 ozs), brick hammer, long knife, axe, digging iron bar 5.5 feet, crow bar 6 feet, crow bar 3 feet, phawda spade, spade shovels 12" * 10", hoe with wooden handle, pick mattock, bond, pliers 8" (210mm), vise grip 10" plier, chisel for concrete 1", chisel for concrete 1/2, safety helmet, gorund sheet (10*10), stainless steel mug 1 ltr, reflective jacket water proof, handy camera with accessories sony - (hdrcx 9.2mp hd), binocular day vision - olympus, binocular night vision - nikon, honda portable generator 3 kva, multifunction tower light with diesel generator set with trolly, honda submerged pump high -2.9kw discharge 2hp(hose - 25 mtr - 1,cable - 100mtr -1), floating pump 1 hp, chain saw (hitachi 18"), floatable fiber boat with obm (yamaha or equivalent), edelrid bud (royal), edelrid pure straihgt carabiner, edelrid hms magnum screw carabiner, edelrid joker harness, edelrid solid full body harness, edelrid power loc expert sp cord 8mm - 100mtr, edelrid performance 10mm - 100 mtr rope, edelrid performance 12mm - 100 mtr rope, edelrid parrot rope 16 mm - 100 mtr, rockport slithering mitten, figure of eight, anthron double stop decender plus, climbing ascender, rescue helmet, colaman woodsman chair, life jacket, edelrid easy pulley, petzl track transport pulley, seil marine raincoats, rock climbing rope

CTN :45678815

06 Jul, 2026 NA

Kinnaur - Himachal Pradesh

Tender For supply of spares for jcb - 320 a5535 adaptor inlet manifold , 320 a0543 stud m6x80x1 , 400 y4200 cowing fan 578 mm , 2206 0816 clip worm drive 8 to 16 mm , 826 11017 tie cable , 400 y1265 cooling pack assy , 335 y5197 bonnut , 1411 0003d washer 3 by 8 med plain , 1420 0007z washer m8 , 826 1254 nut rivet , 401 g33390 roof moulding trimmed , 334y0970 1 door assy tinned glass left side , 334y0965 1 glass frame side window tinned glass left side , 334y4429 1 wiper motor assy front wiper , 333 d8588 bracket locking c , 333 y8264 tape reflective white , 335 y5201 pannel side grille lh , 335 y5200 pannel side grille rh , 1305 0308z set screw m8x30 , 335 y5268 hose 10bsp hp 2030 mm alt pt no 332 y6629 , 335 y5266 hose 10bsp hp 1275 mm alt pt no 332 y8480 , 400 u8762 adopter top hose , 335 y4035 grille front , 646 05321 adhensive , 128 f8985 fender rear lh , 400 r3673 adoptor top hose dia 48 , 400 r3453 adoptor bottom hose , 333 y8199 track rod link assy , 614 80055 hose 5 by 8 bsp hp 550 mm , 835 00017 cap grease nipple , 335 y8910 pin pivot tipping link end , 335 y7803 pivot pin dipper end

Corporations/Associations/Others

CTN :45662707

02 Jul, 2026 4.05 Lacs

Multi City - Karnataka

Tender For supply and maintenance of necessary materials for 7 pure drinking water units in bilagi town - item description: painting steel work with deluxe multi surface paint to give an even shade. two coat applied @ 0.90l/10 m² over an under coat of primer applied @ 0.80 l/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of engineer-in-charge.. (pwd sr v-2, 2023-24, item no-8.33.3, page no-46), item description: providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of engineer-in-charge..:(pwd sr 2023-24 / volumme ii / i.no-8.3.2 /p.no-41), item description: supplying and fixing rolling shutters of approved make, made of required size m.s. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to is: 4454 - part 1 and m.s. top cover of required thickness for rolling shutters. 80x1.25 mm m.s. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the engineer-in-charge.(csr 2023-24 v-2 itm no.11.6.1 pg 78), item description: dismantling tile work in floors and roofs laid in cement mortar including stacking material to the appropriate disposal area as per direction of engineer-in-charge. for thickness of tiles 10 mm to 25 mm (pwd sr 2023-24 / volumme ii /i.no-19.22.1 /p.no-189), item description: providing and laying cement concrete pavement with 1:2:4 for commercial & residential building floors, hardpaths, footpaths using 1 ce ment : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size, including finishing complete as per engineer incharge (pwd sr 2023-24 / volumme ii / i.no-9.4 /p.no-59), item description: flooring with 25mm thick polished shahabad slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, , including cost of materials, labour, curing, polishing complete as per specifications.(pwd sr 2023-24 / volumme ii / i.no- 9.35 /p.no-64), item description: providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered upvc (matching to ral-9016) sections and with minimum tio2 (titanium dioxide) at 6phr with tpe(thermo plastic elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with galvanized iron profile through-out the window frame. the outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and sash with overall size of 39mm x 75mm with gi reinforcement of 2mm and mesh sash of size 37mm x 58mm. coextruded glazing bead for fixing of glass shall be of size 20mm x 24 mm. windows shall be provided with 6mm plain float glass, standard hardware& multi point locking system with touch lock. wall thickness of frame & sash shall be of 2mm-2.5mm. maximum possible size 2419mm x 2200mm (the cost is inclusive of all fixtures and separate charges for minor t&p s shall not be made) (pwd sr 2023-24/volumme ii/i.no-12.90 /p.no-110), item description: providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel prime

State Government

CTN :45661343

03 Jul, 2026 75.37 Lacs

Ambala - Haryana

Tender For providing and fixing of pool equipment accessories in swimming pool at sport complex sector-10, ambala city. “providing and fixing of pool racing lane and pool standard podium and other equipment accessories etc. complete in all respect and all other works contingent thereto.” (including three-year defect liability /mtc. free of cost. ) - [1.pm057] pm057. hire charges for jcb with bucket capacity more than 0.75 cum with fuel and driver [rate], [10.2]supplying and filling in plinth with sand (conforming to zone-iv, is 1542) under floors, including watering, ramming, consolidating and dressing complete. [through rate], [10.50.1]providing and laying polished granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the engineer-in-charge. 1. polished granite stone slab jet black, cherry red, elite brown, cat eye or equivalent. [through rate], [11.13.2]cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 2. 20 mm cement plaster [through rate], [11.52]cement rendering on plaster 1 mm thick [through rate], [12.134.4]providing and fixing factory made upvc white colour sliding glazed window up to 1.50 m in height dimension comprising of upvc multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape and size according to upvc profile), appropriate dimension of upvc extruded glazing beads and upvc extruded interlocks, epdm gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), g.i fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. profile of frame and sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware`s and drainage of water etc. after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing and direction of engineer-in-charge. (single / double glass panes, wire mesh and silicon sealant shall be paid separately). variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 4. three track three panels sliding window with fly proof s.s wire mesh (two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (area of window above 1.75 sqm). [through rate], [12.171]providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top and bottom pivot and double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of engineer-in-charge (door handle, lock and stopper etc.to be paid separately). [through rate], [12.177.1]providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (cost of aluminium snap beading shall be paid in basic item): 1. with toughened glass panes of 6 mm thickness (weight not less than 15 kg/sqm) [through rate], [13.41]providing and fixing stainl

CTN :45649560

29 Jun, 2026 NA

South Tripura - Tripura

Tender For supply of all kinds of aluminium items for different construction work under rd satchand division during the year 2026-27 - providing & fitting fixing of anodized aluminium framed (24 series, 1.50mm thick ) upper part fixed & sliding shutter in 2 (two) track window as approved design of department with 4 mm thick plain or coloring glass etc and necessary accessories for suitable locking & handling arrangement for the complete job as per direction of engineer-in-charge., providing & fitting fixing of anodized aluminium framed (24 series,1.50 mm thick ) upper part fixed & sliding shutter in 3 (three) track window as approved design of department with 4 mm thick plain or coloring glass etc and necessary accessories for suitable locking & handling arrangement for the complete job as per direction of engineer-in-charge., providing & fitting fixing of anodized aluminium framed window upper part fixed & open able shutter in 2 (three) part (40 series, 1.50 mm thick ) with 4 mm thick plain or coloring glass etc and necessary accessories for the complete job as per direction of engineer-in-charge., providing & fitting fixing of anodized aluminium framed window upper part fixed & open able shutter in 3 (three) part (40 series, 1.50 mm thick ) with 4 mm thick plain or coloring glass etc and necessary accessories for the complete job as per direction of engineer-in-charge, providing & fitting fixing of fixed aluminium framed partition with 12 mm prelaminated particle board / 4mm plain or coloring glass incl. door etc and necessary accessories as required for the complete job as per direction of engineer-in-charge., providing & fitting fixing of fixed 1, 50 mm thick suitable aluminium framed partition with 4 mm plain or coloring glass providing opening for door etc and necessary accessories as required for the complete job as per direction of engineer-in-charge., providing & fitting fixing of 1.5mm thick aluminium framed (3.5 x1.75 ) door based on hydraulic floor spring, made of 12 mm pre-laminated board & 6mm thick plain or coloring glass in top with upper / lower closer and necessary accessories as required for the complete job as per direction of engineer-in-charge., providing & fitting fixing of twin type door hydraulic floor spring based, made of 12 mm thick plain or coloring glass with suitable standard & approved aluminium frame in top and bottom including necessary accessories as required for the complete job as per direction of engineer-in-charge., providing & fitting fixing of 1.5mm thick aluminium framed (3.5 x1.75 ) hinge swing door made of 12 mm pre-laminated board & 6mm thick plain or coloring glass in top with necessary accessories as required for the complete job as per direction of eng.-in-charge., (b) color coated aluminium framed providing & fitting fixing of aluminium framed (24 series, 1.50mm thick ) upper part fixed & sliding shutter in 2 (two) track window as approved design of department with 4 mm thick plain or coloring glass etc and necessary accessories for suitable locking & handling arrangement for the complete job as per direction of engineer-in-charge., providing & fitting fixing of aluminium framed (24 series,1.50 mm thick ) upper part fixed & sliding shutter in 3 (three) track window as approved design of department with 4 mm thick plain or coloring glass etc and necessary accessories for suitable locking & handling arrangement for the complete job as per direction of engineer-in-charge., providing & fitting fixing of aluminium framed window upper part fixed & open able shutter in 2 (three) part (40 series, 1.50 mm thick ) with 4 mm thick plain or coloring glass etc and necessary accessories for the complete job as per direction of engineer-in-charge., providing & fitting fixing of aluminium framed window upper part fixed & openable shutter in 3 (three) part (40 series, 1.50 mm thick ) with 4 mm th

Central Government/Public Sector

CTN :45643464

01 Jul, 2026 NA

Jhansi - Uttar Pradesh

Tender For supply testing, installation and commissioning of 04 nos boggies at wagon repair workshop jhansi. having specification along with following accessories; (a) 04 nos. bogie (b) seating capacity of each bogie should not be less than 6 persons. (c) solar panel on roof of bogie with light in every bogie. (d) track width = 22 inches (e) base should be of heavy frame ms structure (f) wheel size = 6 inch (g) outer bogie body and top should be of frp. (h)bogie size 7ft x3.5 ft (i) lighting system - led light in each bogie (j) complete supply, installation, testing and commissioning at site. (k) all fastners and fixtures and accessories included. [ warranty period: 36 months after the date of delivery ] ]

Shackle Strap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government

Corporations/Associations/Others

State Government

Central Government/Public Sector