Latest shade Tenders | Government shade Tenders

Corporations And Associations And Others

CTN :45565298

06 Jul, 2026 NA

Bhopal - Madhya Pradesh

Tender For rco for supply of agro textile shade net (isi marked- non isi tape type mono type)(second call)

Central Government/Public Sector

CTN :45555718

23 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For supply of retro reflective roll , size- 125 mm width x 45 mtr , colour- golden yellow,colour shade no- 356 of is-5/1994, make- 3m983rr or similar [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45567251

20 Jul, 2026 NA

Agra - Uttar Pradesh

Tender For supply of air vent for lhb c 3 tier economy coaches, colour shade is ral-7004, signal gray as perdrg no :- ed64012 alt a or latest [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45556968

29 Jun, 2026 NA

Kapurthala - Punjab

Tender For set of protective clothing pant & shirt for staff. blend 67% polyster & 33%cotton of brand- raymond, jct, vimal/ only vimal, siyaram, mayur, grasim & s.kumar. width -147 cm, length of pant 1.35 mtrs with twill weave & count of yarn 42 tex (14's ne) and gsm 240+/- 5%. length of shirt 1.65 mtrs and gsm 190+/-5%. pilot sample to be approved by rcf before supply, as per drawing: the min. parametrs as per is 15853/2009 and preferably shade code no. 106 for pant and no. 631 for shirt as per is- 5/78 or as advised by rcf. one piece of pant and shirt to be packed in plastic cover of min. 20 microns. test reportof nabl accrideted lab to be submitted along with the pilot sample. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45556969

29 Jun, 2026 NA

Kapurthala - Punjab

Tender For protective clothings for ladies staff of brand raymond, jct, vimal/ only vimal, siyaram, mayur, grasim & s.kumar in cut length of 4 mtrs. pilot sample to be approved by rcf before supply., as per drawing: as per is: 11248/1995 with over-riding parametersas per annexure-a dated 14/03/2022, shade code no.101 as per is- 5/78 or as advised by rcf. cloth should be packed individually in plastic cover of min. 20 microns. test report of nabl accredited lab to be submitted along with the pilot sample. [ warranty period: 30months after the date of delivery ] ]

Central Government/Public Sector

CTN :45557015

30 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of full gloss polyurethane enamel paint (two pack system), colour shade: light green to ral no. 6037 for painting of air spring top plate of capacity 120 kn. conforming to chapter v of rdso specification no. m&c / pcn / 100 / 2018. note: the paint shall be supplied in one liter packing only. [ warrantyperiod: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45575937

23 Jun, 2026 NA

Perambalur - Tamil Nadu

Tender For supply of under coat paint to match colour shade ral 070 80 40 (apricot yellow) paint to spec. is8662/2024, rev.-3 and icf/md/spec-045, issue status 2, rev.03 with amdt. dt. 22/4/2008 or the latest. the pigment content shall be 6% minimum (by mass) as per rdso lr.no. m&c/pcn/i/64/i/vol.ii dated 12/5/2016 as rdso amdt. no.1 packing condition : packed in 20 litres new, sound and returnable ms drums to is 2552/89 ( ra - 2018) with amdt. no.1 gr.b2 or latest. [ warranty period: 12 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45576784

26 Jun, 2026 NA

Perambalur - Tamil Nadu

Tender For supply of flouro polymer paint (top coat ) shade ral 7012 as per jis k -5659/2008 [ warranty period: 12 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45578569

24 Jun, 2026 NA

Perambalur - Tamil Nadu

Tender For supply of enamel, synthetic, exterior, finishing colour shade ral 070 80 40 (apricot yellow) paint to spec. is: 8662/2024 rev.-3 and icf/md/spec-045, issue status 2, rev.03 with amdt. dated 22/4/2008 or the latest. the pigment content shall be 6% minimum (by mass) as per rdso letter no. m&c/pcn/i/64/i/vol.ii dt: 12.05.2016 as rdso amdt.no.1 packing condition: packed in 20 liters new, sound and returnable ms drums to is: 2552/89 (ra 2018) withamdt.no.1. gr.b2 or latest [ warranty period: 12 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45324560

23 Jun, 2026 85.78 Lacs

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : project supply, installation, testing and commissioning of 20nos radar and accessories. sh civil works at yarada visakhapatnam phase-ii - extra for concrete work in superstructure above floor v level for each four floors or part thereof by mechnical means., reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-iii) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)., steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. a) thermo- mechanically treated bars of grade fe-500d or more., centering and shuttering including strutting, propping etc. and removal of form for lintels, beams, plinth beams, girders, bressumers and cantilevers, brick work with non modular fly ash bricks conforming to is:12894, class designation 10 average compressive strength in super structure above plinth level up to floor v level in :cement mortar 1:4 (1 cement : 4 coarse sand), providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete., float glass panes 4 mm thick glass pane (weight not less than 10kg/sqm)., providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with isi, is : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete., providing and fixing is : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :125x64x1.90 mm, fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately), providing and fixing factory made single extruded wpc (wood polymer composite) solid door/window/clerestory windows & other frames/chowkhat comprising of virgin pvc polymer of k value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying pvc solvent cement and screwed with full body threaded star headed ss screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 n (face) & 1100 n (edge), minimum compressive strength of 58 n/mm2, modulus of elasticity 900 n/mm2 and resistance to spread of flame of class a category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with m.s hold fast/lugs/ss dash fasteners of required dia and length complete as per direction of engineer-in- charge. (m.s hold fast/lugs or ss dash fasteners shall be paid for separately). frame size 45 x 70 mm, providing and fixing factory made single extruded wpc (wood polymer composite) solid plain flush door shutter of required size comprising of virgin polymer of k value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 n (face) & 900 n (edge), minimum compressive strength 50 n/mm2, modulus of elasticity 850 n/mm2 and resistance to spread of flame of class a category with property of

Shade Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors