Latest shades Tenders | Government shades Tenders

Central Government/Public Sector

CTN :45334614

16 Jun, 2026 NA

Akola - Maharashtra

Tender For 1) new amravati station - trackwork in connection with provision of high level passenger platform and development of goods shed facilities. (wp 2024-25 irpsm id-01.01.16.25.3.50.012).2) akola station - trackwork in connection with extension of up shunting neck for full length to facilitate replacement/removal of goods shed. (wp 2025-26 irpsm id-01.01.16.25.3.50.011).

Central Government/Public Sector

CTN :45334619

16 Jun, 2026 NA

Akola - Maharashtra

Tender For 1) new amravati station - civilwork (earthwork for track) in connection with provision of high level passenger platform and development of goods shed facilities. (wp 2024-25 irpsm id-01.01.16.25.3.50.012).2) akola station - civilwork (bridge+earthwork) in connection with extension of up shunting neck for full length to facilitate replacement/removal of goods shed. (wp 2025-26 irpsm-01.01.16.25.3.50.011).

Central Government/Public Sector

CTN :45334622

16 Jun, 2026 NA

Akola - Maharashtra

Tender For 1) new amravati station ballast supply in connection with provision of high level passenger platform and development of goods shed facilities. (wp 2024-25 irpsm id-01.01.16.25.3.50.012).2) akola station - ballast supply in connection with extension of up shunting neck for full length to facilitate replacement/removal of goods shed. (wp 2025-26 irpsm id-01.01.16.25.3.50.011).

Central Government/Public Sector

CTN :45324560

16 Jun, 2026 85.78 Lacs

Visakhapatnam - Andhra Pradesh

Tender For project supply, installation, testing and commissioning of 20nos radar and accessories. sh civil works at yarada visakhapatnam phase-ii - extra for concrete work in superstructure above floor v level for each four floors or part thereof by mechnical means., reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-iii) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)., steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. a) thermo- mechanically treated bars of grade fe-500d or more., centering and shuttering including strutting, propping etc. and removal of form for lintels, beams, plinth beams, girders, bressumers and cantilevers, brick work with non modular fly ash bricks conforming to is:12894, class designation 10 average compressive strength in super structure above plinth level up to floor v level in :cement mortar 1:4 (1 cement : 4 coarse sand), providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete., float glass panes 4 mm thick glass pane (weight not less than 10kg/sqm)., providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with isi, is : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete., providing and fixing is : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :125x64x1.90 mm, fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately), providing and fixing factory made single extruded wpc (wood polymer composite) solid door/window/clerestory windows & other frames/chowkhat comprising of virgin pvc polymer of k value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying pvc solvent cement and screwed with full body threaded star headed ss screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 n (face) & 1100 n (edge), minimum compressive strength of 58 n/mm2, modulus of elasticity 900 n/mm2 and resistance to spread of flame of class a category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with m.s hold fast/lugs/ss dash fasteners of required dia and length complete as per direction of engineer-in- charge. (m.s hold fast/lugs or ss dash fasteners shall be paid for separately). frame size 45 x 70 mm, providing and fixing factory made single extruded wpc (wood polymer composite) solid plain flush door shutter of required size comprising of virgin polymer of k value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 n (face) & 900 n (edge), minimum compressive strength 50 n/mm2, modulus of elasticity 850 n/mm2 and resistance to spread of flame of class a category with property of being termite

corporations/Associations/Others

CTN :45325584

22 Jun, 2026 2.41 Crore

Multi City - Karnataka

Tender For procurement of enamel paints and allied materials - metal paste, rubbing compound, thinner 102 (reducer), pu polyester putty, nc putty, red oxide primer, tyre rim hood paint, chassis black paint, nc thinner, enamel thinner, enamel silver paint, enamel light paint / other standard shades, enamel paint - white / half white / deep orange / golden yellow / dark green / pale cream / raw silk / ivory grey / opaline green, enamel paint - black / p o red / passion red / oxford blue / navy blue / sky blue / dark grey / light grey / smoke grey / nilgiri blue

Corporations And Associations And Others

CTN :45328794

02 Jun, 2026 19.95 Lacs

Delhi - Delhi

Tender For providing t and p items and garden tools for ward no. 171 (cr park) south zone - providing t & p items and garden tools for ward no. 171 (cr park) south zone., supply of telescopic pole pruner:-specification:-pole length including blade: 6.5mblade material: hardened & tempered high carbon steel. the head of the blade shall have a hooked tip useful for cutting twigssaw blade shape: hooked type curved sawblade type & no of cutting teeth: tripple grounded 86 teeth blade length: 15"-16"pole type: light weight telescopic tubular aluminum alloy extendable poleno of positions for pole heightadjustment: 10 positionslocking mechanism: ergonomicvally designed two way locking mechanismtotal working length: max 219"(6623 mm), mln 103" (3103mm) branch cuttingcapacity: 200mm max, petrol operated brush cutterengine: single cylinder, 2 stroke, aircooled onlyengine displacement: 40.2ccpower output: 2kw/2.7hpmax output shaft speed at cuttingattachment: should be minimum 9000 rpmcarburetor: diaphragm with compensator technology.fuel tank capacity: minimum 600 ml.weight(dry, without cutting attachment & deflector): should not be more than 7.5 kgclutch: centrifugal type, clutch shoe support base & lining metal only.multi function handle: should have acceleration, on/off switch at right handle.brushcutter harness: should be double shoulder harness only.anti vibration system: must have 4- point aniti vibration system.vibration level in m/s2 at right handle: should not be more than 2.5 m/s2sound pressure level db(a): should not be more than 105 db(a)drive shaft design: must have drive shaft ends square design type only.certification: must have valid en certification, telescopic petrol operatedpole prunerengine: single cylinder, 2 stroke, air cooled onlydisplacement: should be between 25-30 ccpower output: should be minimum 1.2 hpweight (dry without cutting attachment & fuel): should not be more than 7.5 kgfuel tank capacity (ml): should be minimum 400mlchain oil capacity (ml): must have minimum 200 ml.clutch: clutch shoe linining should be metal only.guide bar length: minimum 30cmguide bar and chain: should have same manufacture onlychain type: every drive link need groove & small oil holes for better lubrication. saw chain pitch should be 1/4" or 3/8picco only and drive link thickness must have 1.1 mm or 1,3 mm.max. output shaft speed (rpm): should be minimum 8000 rpm at chain sprocket.equipment total length with guide bar and chain (cm): should be minimum 220 cm - compressed & total length of equipment -minimum 350 cm - extended.sound pressure level (db/a): should not be more than 95 db(a)vibration measurement m/s2 at control handle extended position: should not be more than 5.5 m/s2certification: must have tuv certification with test standard en iso 11680, supply of lawn mower:-specification:- type of machine walk behind lawn mowers power sourcepetrol engine engine displacement 224ccstart type recoil / pull startspeed control variable speeddrive type all wheel driveblade style rotary typeblade engagement electromagneticcut width (mm) 525 to 549minimum cut height 20 millimetermaximum cut height 80 millimeterblades hardened steelnumber of blades 1number of positions for cut height adjustment 6number of levers for cut heightadjustment: single levernumber of wheels 4front wheel size 203 millimeterrear wheel size 250 millimeterwheel tyres pneumaticif yes, grass catcher / collector / bag volume 70 liter"engine power rating (watt)" 4000 to 4999engine fuel tank capacity 1.4 ltr., supply of synthetic enamel paint in all shades as per required and direction of officer-in-charge., petrol operated chain sawengine : single cylinder, 2stroke, aircooled onlydisplacement: 45.4cc poweroutput: 2.3kw. 3.0 hpmax. engine speed (with guide bar & chain): at least 12500 rpmcarburetor: diaphragm type compensator technology.fuel tank capacity: should be minimum 450 ml.dry weight(without cutting attachment):should not be more than 5.0 kgc

Central Government And Public Sector

CTN :45334843

19 Jun, 2026 NA

Nagpur - Maharashtra

Tender For upgradation/modernisation of hirdamali goods shed & construction of additional loop line with goods platform at hirdamali station nagpur division.

State Government

CTN :45313864

02 Jun, 2026 12.00 Lacs

Chandigarh - Chandigarh

Tender For supply & installation of modular office furniture comprising of modular workstation and overhead storage etc at estate branch pgimer, chandigarh & fabrication, supply & installation of under shelf and over head wooden cabinets of various sizes including incumbency boards fabricated out of 18mm thick commercial plywood duly laminated & polished in approved shades in various departments of the institute including special clinic of dental block, pgimer, chandigarh

CTN :45330058

02 Jun, 2026 35.67 Lacs

Silvassa - Gujarat

Tender For procurement of furniture for new phc at naroli in ut of dnh. - providing & fixing 3 seater sofa: dimensions w x h x d (cm)- 175 x 83.5 x 80finish color - brownseat height (cm) - 46.5upholstery material - fabricwarranty - 1 year warrantyprimary material - fabricaesthetically pleasing, mid-back designer backrest with tufts and clean stitching. rounded armrests with soft foam seating provide ergonomic comfort. easy-to-clean synthetic leather or fabric for the cool touch and feel., providing & fixing 2 seater sofa: dimensions w x h x d (cm)- 127.5 x 83.5 x 80finish color - brownseat height (cm) - 46.5upholstery material - fabricwarranty - 1 year warrantyprimary material - fabricaesthetically pleasing, mid-back designer backrest with tufts and clean stitching. rounded armrests with soft foam seating provide ergonomic comfort. easy-to-clean synthetic leather or fabric for the cool touch and feel., providing & fixing living room center table: diante coffee table hg mdf afy -diante coffee tablel x w x h 1100 x 600 x 463table-top 18mm thick hmrd board in afyon marbleplt 18 mm thick in black inkconfiguration shelf storage + concealed storag, providing & fixing living room side table: vegas table - 450d - 520h made with precision in urban design, the vegas corner table is a piece of art that can make any space come alive. its bright colour will enliven any interior. place it amongst monotones or other brightlycoloured furniture. the luxurious smooth finish of the base is made of fibre glass reinforced plastic. tempered glass top is stronger and more durable than regular glass, making it a safer choice for interiors. . this petite table can withstand a weight of up to 20kgs., providing & fixing living room tv unit :"overall size:height - 550 mm x width - 1504.0 mm x depth - 450.0 mmmaterial:all the carcass body panels are made of 18 mm thick prelaminated particle boarden312, e1 grade in wood grain shades, with all theedges edge-banded with 0.8 mm. thick pvc lipping.carcass back panel & drawer bottom panels are made of 9mm thick prelaminatedparticle board of en312, e1 grade.door and drawer fronts are made of 18 mm thick, prelaminated particle boarden312, e1 grade in solid shade, with all the edges, edge-banded with 0.8 mm. thickpvc lipping.the bottom leveler frame and legs of the unit are made of 25x25x1.2 and 38x1.2erw tube as per is 7138, with powder coating finish.hardware: high quality hardware used like hinges, roller slides, cam fasteners,dowels, levelers", providing & fixing pooja room mandir: mandir size:length 1180 mm x depth 240 mm x height 1700 mm, kitchen dimensions:providing & fixing kitchen shuttersshutter material shall be 13 mm thick bwp/bwr grade plywood.lamination shall be done on both sides of the shutter with 1.0 mm thick exterior-grade. provide all required hardware fittings (hinges, screws, accessories, etc.) shall be included.fixing of shutters shall be done as per manufacturer s specifications and site requirements.dimensions:4750 mm x 1662 mmarea:85 sq.ft, providing & fixing dining table: dimensions w x h x d (cm) - 175 x 77 x 89.9primary material - rosewood (sheesham)finish color - dark brownnet weight (kg) - 45warranty - 1 yeardelivery condition - knock downstyle - contemporary & modern"overall size :dining chair :length : 45cm width : 45cm height : 95cmcushion seat : length : 45cm width : 45cm height : 50cm ", providing & fixing bed:overall size : length : 206cm width : 190.5cm bed height : 42cm bed with headboard height : 100.8cmbed -metal frame materials & dimensions:(gauge +/-0.1mm): m.s pipe 20x20 (square pipe), 30x5 (draw strip), 25x6 (draw strip), 20x5(draw strip), 8mm draw rnd sariya, 12mm draw rnd pipe. decoration materials & specifications: (density / type) 25mm softy foam, fevicol, 3 ply thermacol, 21x31 poly bag, etc, aventura mat 78 72 5 - 1981.2 l 1828.8w the aventura mattress has a plush euro-top surface with extra cushioning for a truly lavish sl

CTN :45326305

04 Jun, 2026 NA

Ranchi - Jharkhand

Tender For construction of machine shed, drying platform and demonstration/display unit shocasing lac cultivation & value addition process unit at cooperative training institute fudi, khunti

Shades Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors