Latest shaft sale Tenders | Government shaft sale Tenders

Central Government/Public Sector

CTN :45345601

26 Jun, 2026 NA

Cuddapah - Andhra Pradesh

Tender For supply of item1 8000hr kit new g200-g250 , item 2 oil rs ultra 209l , item3 unloader kit c190 part no-3002604220 , item4 assembly part no-1623181080 , item5 bearing part no- 500451003 , item6 sealing part kit part no-3002604870 , item7 mvp kit part no-3002604880 , item8 kit shaft seal part no-3001531117 , item9 cv-osv kit part no- 3002604860 , item10 thermostat valve part no- 1830080588 , item11 o-ring 32.2x3 part no-663313000 , item12 contactor 3ts5422-0ap0-ac3-230vac part no- 90965955561 , item13 contactor-3ts522-0ap00-8k- 230vac part no-9096594993 , item14 contactor part no- 9096595558 , item15 over load relay part no-9096594993 , item16 circuit breaker part no-9096595563 , item17 transformer part no-9096595585 , item18 connector mk5 16pins part no-1088003781 , item19 connector mk5 14pins part no-1088003780 , item20 connector part no- 1088003132 , item21 fan axial part no-1092140230 , item22 temperature sensor part no-1089057470 , item23 pressure sensor part no-1089057591 , item24 temperature switch part no-1089063716 , item25 solenoid valve part no-1089062110 , item26 pressure sensor part no- 1089962501 , item27 kit mk55 lpwa with antenna part no- 1837032033 , item28 solenoid valve replacing- 1089038061 part no-1089066834 , item29 valve safety part no-1092000177

State Government

CTN :45313570

09 Jun, 2026 NA

Ranchi - Jharkhand

Tender For e-quotation for seeking firm rates for non-schedule items for preparing estimates. - s/i/t/c of new 80 hp vt pump set, supplying,installation,testing and commissioning of vt pumpset (confirming to is1710:2021 standards) with 35 ft suitable size ms column pipe assembly in random length of 5 ft.(make-jyoti/wpil/kirloskar) with ss/bronze impeller capable to discharge 216 m3/h against a total head of 68m coupled with vertical solid shaft tefc ie3,ip55 type squirrel cage induction motor (make-siemens/crompton/abb) operating on 3 phase 50 hz,415v+- 10% supply and having speed 1400-1500 rpm (bhp of motor should be 10% more than that of pumpset including cost pof supplying,fitting and fixing of all required accessories, repairing of 80 hp vt pump set at raw water, supplying all labour tools and tackles for taking out the 40hp vt pump set with bowl assembly, column pipe and line shaft etc., cost towards dismantling of complete bowl assembly., cost towards repairing and fitting the parts of vt pumpset as per requirement (works as complete overhauling of the pump) such as:-1.machining/lathe work 2.changing ss top shaft,line shaft(2 nos of 5 feet) of and bottom shaft2.repairing of bowl assembly and impleller3.supplying and fitting c.l spider bearing with rubber cut less bush-4nos4.supplying and fitting of worn-out nut-bolts,bolt-nut washer,gland body bush machining,other machining works,etc as per requirement, complete assembling the pump set and lowering including supplying all petty materials., cost for supplying and installation of required accesories for repair and maintenance of motor control panel such as:-150 amp contactor-2 no (for 1 no starter)160 amp,breaking capacity -36ka mccb 1 no56-90 a electronic overload relay-2 nostimer-2 nosvolt meter 1 nosamp motor 1 nospilot lamp 6 nosselector switch 4 nossingle phase preventer 2 nos[ all accessories of reputed make]with complete internal wiring with suitable size of copper wire and testing on load., repairing of 30hp c/f pump sets at clear water, cost for dismantling of 30 hp c/f and pump inspection,changing of its damaged parts such as:-key-01 no, gland tightner -1 set, gland tightner stud-2 nos, c.i bearing housing with cap -1 set, ball bearing 6306 (skf)-2 nos, grease, gland packing,maching of the pump parts as per required etc all complete and testing on load etc., cost towards complete repairing of motor control panel starter 30hp cf pump set opening and changing of damaged parts such as 1.mccb - 50 amp,25ka,3pole-2 nos (for motor backup protection),mccb -100 amp,50ka,3pole-1 no (main mccb)2.overload relay 26-40 amp-1no3.star delta timer-1no4.digital volt meter,ampere meter,three pahse indicator lamp,push button on/off,on/off/trip indicator,wiring,etc as per required, repairing of 15hp c/f pump sets at clear water, cost for dismantling of 15hp c/f and pump inspection,changing of its damaged parts such as:-key-01 no, gland tightner -1 set, gland tightner stud-2 nos, c.i bearing housing with cap -1 set, ball bearing 6306 (skf)-2 nos, grease, gland packing,maching of the pump parts as per required etc all complete and testing on load etc., cost towards complete repairing of motor control panel starter 30hp cf pump set opening and changing of damaged parts such as 1.mccb -25 amp,15ka,3pole-2 nos (for motor backup protection),mccb -50 amp,25ka,3pole-1 no (main mccb)2.overload relay 20-25 amp-1no3.star delta timer-1no4.digital volt meter,ampere meter,three pahse indicator lamp,push button on/off,on/off/trip indicator,wiring,etc as per required

CTN :45282073

01 Jun, 2026 NA

Bangalore - Karnataka

Tender For supply of door lock knob lh , door opening catch with cover , battery cut off switch , 4x4 aluminium body cap oil seal for leakage hub seal packing , hub seal packing , speedo meter cable , electrical work labour charges for checking all broken wires , mechanical labour charges for removal of old items and fitmmlent , door opening catch , combination switch , fog light assy , head light bulb , hood light assy , indicator , parking light bulb , tail light bulb , wiper blade , ram assy overhauling , rear hub nut and bolt , rear hub packing , wheel nut and bolt , electrical work labour charges for checking all broken wires , mechanical labour charges for removal of old items and fitmmlent of , batter cut off switch , hood light wiring , indicator assy , reverse gear buzzer , side mud guard indicator , tail lamp assy , 4x4 aluminium cap , clutch booster assy , brake kit pipe with connector , clutch booster pipe , clutch plate , clutch pressure plate , clutch release bearing , hood pump 3 way union , mechanical labour charges for removal of old items and fitment , door lock , battery cut off switch , reverse light switch , 4x4 aluminum cap , diesel over flow pipe with connector , hood lifting pump , hub axel bolt and nut , load spring blade , load spring blade 35 inches , feed pump hand primer , electrical work labour checking all broken wires and bulbs and necessary , mechanical labour charges for removal of all items of new spare parts , door mechanism , head light wiring , spare wheel rope , electrical work labour charges for checking all wires and bulb , mechanical labour charges for removal of all items and fitments of , head light assy , parking bulb , relay 12volts , cabin lock nut and bolt , front shaft nut and bolt , spider bearing , mechanical labour charges for removal of all items and fitments ) /bid number : gem/2026/b/7565952 * /dated: 20-05-2026 & & / bid document 1 / 45

CTN :45291428

02 Jun, 2026 NA

Jhajjar - Haryana

Tender For supply of norgren 802050 m 80 pneumatic cyl , norgren 802050 m 100 pneumatic cyl , norgren 802050 m 160 pneumatic cyl , c96kdb 40 400c pneumatic cyl , smc c96kdb 40 300c pneumatic cyl , smc cq2wb63 40dz lifting cyl , metalwork 50x320 pneumatic cyl , single pilot valve , solenoid valve sov 25 valve , solenoid valve sov 35 valve , wheels for 24h carousel , load cell flintec 200kg c3 s , belt for 24h carousel 30 meter , keypad for cuc mk iv , display for cuc mk iv , sprocket 14 teeth 65 bore , sprocket 8 teeth nylon bush , 213 bearing ntn , sprocket 42 teeth 60 bore duplex , needle valve hoke , taper strip ms 1800 mm , 1550 mm uhm taper 90 degree bend , 1850 mm uhm taper 90 degree bend , inlet star 4 pieces each set , outlet star 4 pieces each set , pcb 250 kg c3 s load cell flintech , ss plate 3 mm thick , 802050 m 40 pneumatic cyl , toggle joint for gd pt festo , roller bearing for gd pt , sensor ni10 m18 y1x h1141 , lower bell gd , load cell cable mkiv , flow control valve 1by8inch 4mm , quick exhaust valve 1by4inch 8mm , nrv 1by4inch festo , straight conveyor section gi , conveyor bend without chain gi , leg support conveyor gi , conveyor drive section gi , conveyor tail end section gi , sply of double stopper , pu tube 4 mm tube , pu tube 6 mm tube , pu tube 8 mm tube , flow control valve 1by4inchx8mm , brass block 230b938 gd pt , wl 24x430 reflective sensor sick , wll 24x430 optical sensor sick , wt 24 2x400s26 proximity sensor , manual hot air gun , load cell cable mkiv 3 meter , load cell cable mkiv 2 meter , gd sensor cable 0.75 mtr mkiv , bearing 6024 z2 , piston rod hex 40 300 , cpv ex pilot valve coil , shaft 40x380 mm en 8 , shaft 60x750 mm en 8 , shaft 60x660 mm en 8 , plummer block with ntn 212 bearing , ss wheel with grooves , angle joint for c channel , c channel for 90 degree bend , anchor fastener size 12 mm , anchor fastener size 14 mm , anchor fastener size 16 mm , spiral tube length 10 mtr dia 8mm , sxe9561 e86 00 valve norgren , dead man switch dp045r61 janatics , 10 mm bolt length 40 mm

CTN :45291537

05 Jun, 2026 2.99 Lacs

Darjeeling - West Bengal

Tender For tender for supply of repair maintenance and servicing of eot crane 2 ton - servicing and maintenance of cranes 02 ton an all allied works with load test. , bridge & cross traverse rail alignment by clamps fitting/ adjustment , replace repaire dsl or ip supply cable on long travel , replace current collector for smooth operation , hoisting motor 5.2kw , 3ph , sc servecing only , cross traverse motor 0.55kw , 3ph , sc servecing only , long travel motor 2.2kw , 3ph , sc servecing only , bridge wheel assembly maintenance and replacement of defective part any of wheel , bearing , spacer , shaft , coupling , brake , gearbox , trolley crab wheel assembly maintenance and replacement of defective part any of wheel , bearing , spacer , shaft , coupling , brake , gearbox , hoock block maintainance and replacement of defective part any of pullies , rope lock , pulley bearing , thurster bearing , cover fastners , replacement of hoist wire rope dia 12 6 nos 36 fibre core , hoist assembly maintenance and replacement of defective part any of coupling , brake shoes , bearing , spacer , shaft , gear. , equiliser pulley maintenance and replacement of defective part any of pulley , shaft , bearing , maintainance for span of the crane within limit , it must not wear wheels on either sides of flanges , maintainance for diagonals of crane within the limit , it must not wear flanges of lt wheels or must not get jam of lt motion , rubber buffers replacement , limit switch for any of motion long travel cross traverse hoisting ) , relay maintenance or replacement with accessories , cross traverse cable replacement , cross traverse cable trollies maintenance or replacement

State Government

CTN :45303639

06 Jun, 2026 NA

Ranchi - Jharkhand

Tender For e-quotation for seeking firm rates of plant and machinery and materials category items for preparation/amendment of schedule of rate for the year 2026. - m 1055 - pumps supplying submersible pump sets confirming to is 8034 and motor confirming to is 9283. pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/ noryl impeller. motor suitable for working on 415v+10%, 3ph, 50 hz, a.c. supply with cable guard, thrust carbon/ fiber bearing to withstand entire hydraulic thrust, water proof winding shall be provided. the pump set shall be suitable for direct coupling. pump shall have suitable outlet as per manufacturers design. anti thrust stream lined non return valve shall be provided with pump. 3 meter submersible copper conductor cable in single/ double run shall be provided with each pump., submersible pump set 100 mm dia (with polypropylene/ noryl impeller) up to 20 stages 1 h.p. , 1.5 hp, 2 hp, 2.5 hp, 3.0 hp, 4.0 hp, 5.0 hp, submersible pump 150 mm dia (with bronze/ss impeller) up to 8 stages, 1.5 hp, 2.0 hp, 3.0 hp, 4.0 hp, 5.0 hp, 6.0 hp, 7.5 hp, m 1056 - pressure guage providing fabricating, testing and commisioning pressure vessel fabricating in m.s plate on providing foundation including epoxy paint, pressure gauge (100 mm dia), pressure gauge (150 mm dia), vacuum / combination gauge, m 1057 - lifting equipment chain pulley block supplying triple spur gear type chain pulley block suitable for capacity as below with 3 m lift complete with load chain and hand chain suitable for above lift, tested to 50% over load as per is 3832 carrying isi mark., 1 tonne capacity, 2 tonne capacity, 3 tonne capacity, electric operated circular or rectangular travelling crane (single girder) supplying single girder electrically operated rectangular over head travelling crane with 6 m lift complete with wire rope hoist, class ii duty, all three motions electrically operated by suitable rating motor ip 54, control panel and down pendant control block., 5 tonne capacity, above 6 m up to 8 m span, above 8 m up to 10 m span, 7.5 tonne capacity, above 6 m upto 8 m span, above 8 m up to 10 m span, 10 tonne capacity, above 6 m up to 8 m span, above 8 m up to 10 m span, m 1058 - lightening arrester, ab switch, insulators, lightening arrestor supplying, erecting approved make thyrite type lightening arrestor suitable for h.t. supply with necessary ancillary material complete on provided cross arm and connected to overhead line., suitable for 11 kv supply, distribution class, suitable for 22 kv supply, distribution class, suitable for 33 kv supply, station class, disc insulator. supplying, erecting porcelain disc type insulators with hardware fittings suitable for h.t. overhead line complete erected with nuts and bolts on provided cross arm, suitable for 11kv line, suitable for 33kv line, pin insulator supplying, erecting porcelain pin type insulators with hardware fittings suitable for h.t. overhead line complete erected with nuts and bolts on provided cross arm, suitable for 11kv line, suitable for 33kv line, air break switch without earth switch supplying, erecting approved make h.t. outdoor type gang operated air break triple pole switch of required capacity with 3 post / pin type insulator per phase , mounted in horizontal or vertical position on provided cross arm with adequate length of g.i. pipe for operating handle erected on extended square shaft. the operating handle provided with lock and key at suitable height from ground with necessary clamps, suitable for 11kv line, rocking / tilting type, rotating type, suitable for 33kv line, rocking / tilting type, rotating type, air break switch with earth switch supplying, erecting approved make h.t. outdoor type gang operated air break triple pole switch with earth switch of required capacity with 3 post / pin type insulator per phase , mounted in horizontal or vertical position on provided cross arm with adequate length of g.i. pipe for op

State Government

CTN :45275642

02 Jun, 2026 3.07 Lacs

Serampore - West Bengal

Tender For repairing and overhauling of one no twin lobe air blower assembly and renovation of 2 nos outgoing motor (blower ) feeder of lt pdb with supply, fitting and fixing spares at sludge pump house under swtp, kmda. - supply,installation,testing and commisioning of following items for hoisting system/ blower and gear box as mentioned below as per direction including cost of materials, machinaries , manpower, cutting,machining,aligning,anchoring,welding,finishing,consumables, carriage and all overheads with all leads and lifts complete as per specification (without painting), i) base frame (ms), ii) shaft/pin with key ways made of ss-304, iii) gear& pinion (forged steel), supply and fixing the 3way c.i v grooved pulley with complete mechanism key way suitable to en-24, 60 mm dia/ as per sample of shaft end., a) motor driving, b) blower driving, supply of gear oil as per direction of engineer in charge., supply of grease, supply and delivery of the following bearing (make: skf):, i) 22312e/c3/ as per sample. (for blower), supply and fixing of tough v belts (make: fenner/power boom / v guard/benq/ecodrive) of the following size c 98/ as per sample., supply fitting fixing of ss (aisi304) bolts,nut & washer i) dia 10 mm to 20 mm a) length upto 75 mm, refixing of impeller of blower after dynamic balancing in workshop as per is rule after dismantling the same., dismantling the 25/30 h.p (18.5 kw)//30 h.p squirrel cage motor from its foundation by opening mounting bolts and disconnection of cables from terminal box and open the v belts for repairing purpose (in condition), preliminary checking of the whole motor (lt sq. cage im) and testing of i.r. value, load currents, leakage factor of stator & rotor, terminal lead joints of stator connection ends, insulation of glass fibre terminal bar, double cage rotor end rings and all of motor bars and bar joints, housing of d.e. & nde shield bearing housing etc. before work to detect fault., complete servicing and heat varnishing of 415volt, 3 phase l.t. sq. cage induction motor after cleaning the stator and heating it up periodically and varnishing by dr. beck s graded insulating varnish to obtain stable ir value, cleaning up the rotor, including heating for demoisturisation, lacker coating on the surface of rotor stampings, cleaning and ro priming on the end shield covers, bearing housing and complete the necessary repairing works as per direction of e.i.c.upto 75kw lt sq. cage im ], re fixing the 25/30h.p star/delta squirrel cage motor over its foundation by mean of mounting bolts & nuts, washer complete connection of existing led of cable at the terminal box and wear the v belts with proper alignment in respect to i.d. fan (12000 cu m/hr capacity)/ blower by adjusting the side rail for smooth running., finishing the end of terminal leads by s & f dowells copper sockets properly supplying tapes, petrollium jelly etc. 6 nos.upto 75kw lt sq. cage im., cost of mechanical work viz. shaft truness, checking key way looping of holes grinding and polishing etc. upto 75kw lt sq. cage im., inspection checking/testing and servicing of the existing starter panel, all terminal connection, contactors, relays etc as per desired technical specification including man and minor materials for proper functioning as per direction of eic., supply and fixing of 240/230 volt, 50 hz, t.p., power contactor (make: l & /abb/schneider/ simence/ ge) having contact block of the following range.32-55amp, supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) blue/ white color., supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) other than blue/ white color., supply and delivery of thermal overload relays (make: l & t/abb/schneider/simence/ ge/minilec) of the following range:a) 0.2-0.33/ 0.3-0,5/ 0.45-0.75, mn2, supply of ammeter selector switch current in each phase with off, 4 pos. 90 angle ofthrow (off-r-y-b) , supply and fixing of analog ammeter ranging

CTN :45169227

28 May, 2026 NA

Birbhum - West Bengal

Tender For corrigendum : procurement of different consumable items and spares for overhauling of unit 5 and unit 3 under em iph dept bktpp - thinner -234 for varnish, varnish bectol red, varnish bectol grey, silastic 732 rtv (300gm bottle), jointing sheet,asbestos,2000x1500x3 mm # jointing sheet,non-metallic compressed asbestos fibre to withstand 550 degree c,150 ksc is code 2712/9.8 grade w/1,size-2000?1500? 3 mm, jointing sheet caf style 59 oil gasket,, jointing sheet,asbestos,2000x1500x1 mm # jointing sheet non-metallic compressed asbestos fibre to withstand 550 degree c,150 ksc is code 2712/9.8 grade 0/1 size-2000?1500? 1 mm, paint synthetic enamel black, paint synthetic enamel smoke gray, acetone, locktite,406,401, hardner,hy 840 for eco-ash wa drg.no.: hw5520073007, resin,cy 205 $for wound stator assy part no.01350801003122, paint remover,locktite,sf-790 for generator, diluent c,drg:5670269,item no:134 generator, mcb,4 pole,63a,top hat rail mounted # 240/415v ac, o/l relay 415v ac,38.0a - 50.0a reference: lr1-d63357,tc, hose ?" dia.430 mm length # hose ?" dia.430 mm length with fittings grade ph8 design pr.345 bar,insulation resistance 15 megaohms for jacking of 210 mw bhel g enerator shaft, hose 3/8" dia. 430 mm length # with fittings grade ph8,design pr. 276 bar,insulation resistance 15 megaohms# for jacking of 210 mw bhel generator shaft, o/l relay 415v ac mn-2 ss94141 3-5a,l&t, o/l relay 415v ac mn-2 9-15a,l&t cat no. ss94114, contactor,power,coil:240 vac,2no+2nc,32a # siemens auxiliary contact-2no+2nc,coil voltage: 240vac,50hz,type: 3tf34 00-0au0,siemens, mcb,3p+1n,16a,top hat rail mounted # 415v ac,9ka, valve gate gm nb-25mm #, ht rubber tape, gear box assembly complete # paharpur cooling towers model: 10p for stage-ii cooling tower (type-6kf ), switch,hp & lp combine cut-out,kp-15 for ac plant, overload relay,18.0-25.0a,415v ac # type:lr1d-25-322 tc, power contactor lc1d80, relay,electronic,over current,0.5~80a 3dm2-wrduwz schneider operating voltage - 100 to 240vac/dc 50/60hz, aux. contact- ol (1nc+1no), al (1no), over load current setting range - 0.5 a to 80a, mpcb,o/l 56-8oa,s/c 15ka # type:gv3me80 schneider-electric, contactor,415v ac,32a,coil 240v ac for power contactor tc, relay, o/l, 415vac, 0.63-1.0a 3ua-5000-0j siemens, thermal overload relay lrd-32 23-32a lad7b106, mcb,3pole,c100, mcb,80a 415vac 3-pole,c-curve,10ka, varnish elmoluft, strainer,screen oil,compressor js 83 af $for ac plant for compressor model: js 83 af,make-blue star, o/l relay 415v ac lr1d-32-355 28-40a,tc

Central Government/Public Sector

CTN :45254612

27 May, 2026 NA

Ratlam - Madhya Pradesh

Tender For supply of load switch shaft complete for tap changer to repl (bt type) pt. no. s2220 drg.no. am 200038r1 or anantashree (ganz type) pt. no. g-2220 drg. no. 9980383639801. or equavalent involute to rdso drg no: skel-4655 sht-1&2 alt-1. [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :44977863

08 May, 2026 NA

Ranchi - Jharkhand

Tender For e-quotation for seeking firm rates for non-schedule items for preparing estimates. - s/i/t/c of new 80 hp vt pump set, supplying,installation,testing and commissioning of vt pumpset (confirming to is1710:2021 standards) with 35 ft suitable size ms column pipe assembly in random length of 5 ft.(make-jyoti/wpil/kirloskar) with ss/bronze impeller capable to discharge 216 m3/h against a total head of 68m coupled with vertical solid shaft tefc ie3,ip55 type squirrel cage induction motor (make-siemens/crompton/abb) operating on 3 phase 50 hz,415v+- 10% supply and having speed 1400-1500 rpm (bhp of motor should be 10% more than that of pumpset including cost pof supplying,fitting and fixing of all required accessories, repairing of 80 hp vt pump set at raw water, supplying all labour tools and tackles for taking out the 40hp vt pump set with bowl assembly, column pipe and line shaft etc., cost towards dismantling of complete bowl assembly., cost towards repairing and fitting the parts of vt pumpset as per requirement (works as complete overhauling of the pump) such as:-1.machining/lathe work 2.changing ss top shaft,line shaft(2 nos of 5 feet) of and bottom shaft2.repairing of bowl assembly and impleller3.supplying and fitting c.l spider bearing with rubber cut less bush-4nos4.supplying and fitting of worn-out nut-bolts,bolt-nut washer,gland body bush machining,other machining works,etc as per requirement, complete assembling the pump set and lowering including supplying all petty materials., cost for supplying and installation of required accesories for repair and maintenance of motor control panel such as:-150 amp contactor-2 no (for 1 no starter)160 amp,breaking capacity -36ka mccb 1 no56-90 a electronic overload relay-2 nostimer-2 nosvolt meter 1 nosamp motor 1 nospilot lamp 6 nosselector switch 4 nossingle phase preventer 2 nos[ all accessories of reputed make]with complete internal wiring with suitable size of copper wire and testing on load., repairing of 30hp c/f pump sets at clear water, cost for dismantling of 30 hp c/f and pump inspection,changing of its damaged parts such as:-key-01 no, gland tightner -1 set, gland tightner stud-2 nos, c.i bearing housing with cap -1 set, ball bearing 6306 (skf)-2 nos, grease, gland packing,maching of the pump parts as per required etc all complete and testing on load etc., cost towards complete repairing of motor control panel starter 30hp cf pump set opening and changing of damaged parts such as 1.mccb - 50 amp,25ka,3pole-2 nos (for motor backup protection),mccb -100 amp,50ka,3pole-1 no (main mccb)2.overload relay 26-40 amp-1no3.star delta timer-1no4.digital volt meter,ampere meter,three pahse indicator lamp,push button on/off,on/off/trip indicator,wiring,etc as per required, repairing of 15hp c/f pump sets at clear water, cost for dismantling of 15hp c/f and pump inspection,changing of its damaged parts such as:-key-01 no, gland tightner -1 set, gland tightner stud-2 nos, c.i bearing housing with cap -1 set, ball bearing 6306 (skf)-2 nos, grease, gland packing,maching of the pump parts as per required etc all complete and testing on load etc., cost towards complete repairing of motor control panel starter 30hp cf pump set opening and changing of damaged parts such as 1.mccb -25 amp,15ka,3pole-2 nos (for motor backup protection),mccb -50 amp,25ka,3pole-1 no (main mccb)2.overload relay 20-25 amp-1no3.star delta timer-1no4.digital volt meter,ampere meter,three pahse indicator lamp,push button on/off,on/off/trip indicator,wiring,etc as per required

Shaft Sale Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

State Government

Central Government/Public Sector

State Government