Latest shaft washer Tenders | Government shaft washer Tenders

Central Government / Public Sector

CTN :40538123

09 Jun, 2025 NA

Angul - Odisha

Tender For supply of set of fasteners for equaliser pin of wag7 locos as per rdso drg. no. skvl - 703, alt-2, consisting of : (1) flat bended cotter size 10x22x125mm long (ref.10) = 28 nos. (2) machined washer to is:2016 (a) i/d-71mm, o/d-120mm, th-10mm (ref.7) = 12 nos, (b) i/d-66mm, o/d-115mm, th-9m m (ref.8) = 16 nos. (3) step size punched washer to is:2016 (ref.9) (a) i/d-71mm, o/d-120mm, th-1, 2 & 3mm = 12 nos each, (b) i/d-66mm, o/d-115mm, th-1, 2 & 3mm = 16 nos each. [ warranty period: 30 months after the date of delivery ]

CTN :40158618

03 Jun, 2025 NA

Ajmer - Rajasthan

Tender For corrigendum : tender for supply of sl ch hd scr m4x10 blackened - sl ch hd scr m4x10 blackened , sl ch hd scr m4x12 blackened , sl ch hd scr m5x10 blackened , spring washer m6 , hex nut size m6soft0 , hexegon nut m8 soft , hex soc hd scr m6x12 , hex soc hd cap screw m6x16 , sl ch hd scr m4x8 blk , sl ch hd scr m4x45 blk , sl ch hd scr m6x35 , hex nut m6 hard , sl ch hd scr m4x55 , hex nut m5 soft , machined washer 8 dot 4 , mc washer 13 , hard washer m8 , washer 50 washer 50 , washer m12 , spring washer b 8 , washer 32

Central Government And Public Sector

CTN :40097547

16 Jun, 2025 NA

Thane - Maharashtra

Tender For corrigendum : supply of end fittings (finish machined) as per taps-4/31120/2403/ddand specification pb/e/00040, r0 , end fitting flange forcoolant tube rolling, drawing no. taps-4/31120/2421/dd &pb/e/00040, r0 , ef spool-a, cs ring shrink fitting mockup,drawing no. taps-4/31120/2428/dd and ts no. pb/e/00040,, ef spool-b for cs ring shrink fitting mock-ups, drawing no.taps-4/31120/2428/dd & ts no. pb/e/00040 , ef spool-c forcs ring shrink fitting mock-ups, drawing no. taps4/31120/2428/dd & ts pb/e/00040, r0 , lattice tube for 16channel mock up as per drawing no. taps-3/31610/2507/ddand 2506/dd , lattice tube 100mm long from 241.25 mmdia end for weld qualification drg no. taps3/31610/2506&07/d , liner tube as per drawing no. taps4/31120/2402/dd and specification pb/e/00041, r0 , linertube spacer (button) as per drawing no. taps4/31120/2402/dd and specification pb/e/00041, r0 , linertube spool for rolling qualification as per drawing no. taps4/31120/2424/dd and specification , liner tube flange forrolling qualification-drawing no. taps-4/31120/2423/dd &ts no. pb/e/00040, r0 , journal ring, cal. side (tool steelaisi-d-2) drawing no. taps-4/31150/2401/dd & tspb/e/00042, r0 , journal ring, fm side as per drawing no.taps-4/31150/2401/dd and specification pb/e/00042, r0 ,bearing sleeve fm side for 16 ch. mock up drg no. taps4/31150/2401/dd & ts no. pb/e/00042, r0 , bearing sleevecal. side side for 16 ch. mock up drg no. taps4/31150/2401/dd & ts no. pb/e/00042, r0 , bearing sleeveretainer ring fm side for 16 ch mock up drg no. taps4/31120/2414/dd & pb/e/00043, r0 , bearing sleeveretainer ring cal. side for 16 ch. mock up drg no. taps4/31120/2414/d & pb/e/00043r0 , ef retaining ring as perdrawing no. taps-4/31120/2414/dd and specificationpb/e/00043, r0 , split sleeve assy. (cs- is: 2062gra, znplated) drg no. taps-4/31120/2413/dd & ts no.pb/e/00044, r0 , bellows attachment ring (cs-a519gr1025) drg no. taps-4/31120/2409/dd & ts no.pb/e/00045, r0 , ss seal ring in bellows 308l/321l as perdrawing no. taps-4/31120/2409/dd & ts no. pb/e/00045,r0 , yoke of position assy drg no. taps-4/31120/2407/ddand specification pb/e/00046, r0 , stud 17-4 ph m-30 x 2-6g as per drawing no. taps-4/31120/2408/dd andspecification pb/e/00047, r0 , unthreaded fixing block(part no. 2) ss-193 (yoke assembly) as per drawing no.taps-4/31120/2410/dd , unthreaded fixing block (part no.2a) ss-193 (yoke assembly) as per drawing no. taps4/31120/2410/dd , threaded block (part no. 3) as perdrawing no. taps-4/31120/2410/dd , threaded block (partno. 3a) as per drawing no. taps-4/31120/2410/dd , squarehead screw m-10 x 1.25-6g (850 x 4) as per drawing no.taps-4/31120/2410/dd , hex. main nut (850 x 2) as perdrawing no. taps-4/31120/2410/dd , hex. lock nut as perdrawing no. taps-4/31120/2410/dd , spring washer (b-10)as per drawing no. taps-4/31120/2410/dd , spring washer(b-30) as per drawing no. taps-4/31120/2410/dd , hex soc.headed cap sc. m4 x 0.7 x 8lg as per drawing no. taps4/31120/2410/dd , master gauge for dimension (l-27, c-4,l-30, b-10, c-8) as per ts no. pb/e/00040, r0 , workinggauges for dimension (l-27, c-4, l-30, b-19, c-8) as ts no.pb/e/00040, r0 , landed sleeve insert (ss-410) for ctrolling as per drawing no. taps-4/31610/2414/dd , cstsflanges (ss304l) for ct rolling as per drawing no. taps4/31610/2414/dd

Central Government/Public Sector

CTN :40252815

31 May, 2025 NA

Varanasi - Uttar Pradesh

Tender For bid to ras supply of fabrication and machined - jr. head liner clamp (hy-901.08.02) - as per drg. 26108802066/02 with matl as per specn. aa10119/15 , spring adjusting bolt (hy-039.00) - fully m/cd item as per drg. 36137600080/02 with matl as per sepcn. aa10208/07 , key (hy-167.01.18) fully m/cd key as per drg. 46148000505/03 with matl. as per specn. aa10208/07 , thrust washer (hy-167.01.27) - as per spec. a-821/02 with matl as per specn aa10208/07 , oil pump key (hy-10.02) - fully m/cd oil pump key as per drg. hy-10.02/00 with matl. en-9

CTN :40228065

17 Jun, 2025 NA

Uttara Kannada - Karnataka

Tender For corrigendum : tender for supply of valves stern gland - agt ring , tab washer dn20 stainless steel , straight-flow ball valve3-4 g female thread with hand lever. , o-ring 36.00x3 64c8 , spare seals kit for wafer valve dn20 , spare seals kit for wafer valve dn40 , spare seals kit for wafer valve dn50 , split ring , split ring , port grind surface valve flow regulator , hydraulic block flow regulator , carbon holder ring , key for polished surface , braid retaining washer , retaining ring of the toothed wheel , spring , nordlock washer dn14 , o-ring 11.2x1.8 20a8 , o-ring 45x3.55 20a8 , o-ring 85x3.55 20a8 , o-ring 100x3.55 20a8 , seating washer , ap hoisting-lowering control solenoid valve , lock tab washer nd16 , nut hhm20 , seal enercap hp , seal enercap hp , seal enercap hp , epoxy glue , electric actuator , electric actuator , grease nipple m10-1 , locking wire , ext. snap ring 15.7x1 steel , clear heat shrink , ring im 30-35-20 p , ring im 35-40-20.4 , chromated nut h m 16 cl8 , copper seal 27 , 3x32x1 , 5 , lattyflon braid 4757 18x18 , lattyflon braid 4789 18x18 , spring , connecting stud rod , rectangular brake tab , lockwasher , valve seal , o-ring 345.00x6.50 20a8 , radial roller bearing nu 1016 m , pneumatic electrodistributor , lock tab washer , serrated lock washer external teeth 8 , copper seal 14x18 , 5x1 , 5 , serrated lock washer external teeth 12 , o-ring 34 , 6x2 , 4x39 , 4 , o-ring 16x3x22-nbr-90 sh , o-ring 30x3x36 , magnetic level switch , cover seal , piston seal , spring , hydraulic block nonreturn valve , pilot non return valve , combined bearing rax435 , nut hfr m14 dax2 , nord lock washer m10 , nord-lock washer nd8 steel , internal valve grinding electrodistributor , 4w/3p hydraulic electrodistri butor , o-ring 355x5.3 20a8 , o-ring 493.00x7.00 20a8 , o-ring 530.00x7.00 20a8 , o-ring 6.00x1.80-20a8 , o-ring 20a8 11.2x1.8 , o-ring 82.5x5.3 20a8 , high density hose , 1-4 flare female od 91 cm , 20mm fb (25mm rb) ball machined , lock wire , spring pin e8-30 (cut to 10 mm) stainless steel , nut h m8 cl8 , lock tab washer nd12 steel , grub screw with flat end hc m4x6 , o-ring 56.52x5.33 20a8 , o-ring 24.20x3.00 20a8 , o-ring 37.47x5.33 20a8 , o-ring 29.30x3.60 20a8 gn

Central Government/Public Sector

CTN :40473010

27 May, 2025 NA

Jhansi - Uttar Pradesh

Tender For supply of set of hardware items for fixing of brake device container complete. 1) hex hd screw m10 x 4 5 confirming to specification no:din-933,iso-4017,is:1364, part-2,1992,a2-70&is:1367(part-14)1984,ce and icf drawing no: lw36182,item-16,alt-b/nil,qty-16 nos/set. 2) machined washer a10.5 confirming to specifica tion no:din-125,iso-2016,1967,200hv,a2 to is:1367(part-14)1984,icf drawing no. lw:36182, item-19, alt-b/ nil, qty- 16nos/set. 3) nyloc nut m10 confirming to specification no:din-982,iso-7002,1991,a2-70 & is:136 7(part-14)1984,icf drawing no:lw:36182,item-21, alt-b/nil, qty-16nos/set, make: unbrako,tvs,tuff, dfl o nly, [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :40484754

10 Jun, 2025 NA

Raipur - Chhattisgarh

Tender For supply of maintenance kit a of sab (450 x 600) consisting of 16 items for coach and wagon for 1 00 % replacement drg. wd-82064-s-01-rc (as per annexure enclosed) & alt.12 as follows-(1) circlip 8 5x4h, itemno.9- 01 no.(2)lock screw, item no.33- 01 no. (3)circlip 40x2.5h item no.30- 01 no. (4)spr ing dowel sleeve(roll pin) heavy 6x10mm, item no.18- 02 nos.(5)friction washer, item no.16 -01 no.( 6)wire ring, item no.15 -01 no.(7) circlip 45x2.5h, item no.40-01 no.(8)multi tooth lock washer b-31, i tem no.45-01 no.(9)circlip 45x1.75h, item no. 3-01 no.(10)actuating sleeve, item no.38, 01 no. per s et. (11)clutch sleeve, item no.19, 01 no. per set(12)adjuster nut , item no.36, 01 no. per set.(13)lea der nut flange, item no.31, 01 no. per set.(14)take up spring, item no.37, 01 no. per set.(15)guide pi n, item no.14,01 no. per set. (16)(a)bearing 45 ta 11 (complete), item no.7,01 no. per set. (b)bearin g 45 ta 11(without shaft washer), item no.32, 02 nos. per set matl.& specn:as per drawing. [ warra nty period: 30 months after the date of delivery ]

CTN :40468839

14 Jun, 2025 NA

Rajauri - Jammu And Kashmir

Tender For supply of aj ed 1510 05 086 engine pulley , aj ed 1510 05 093 bearing , aj ed 1510 05 089 clutch shaft , aj ed 1510 05 129 pressure plate , aj ed 1510 05 130 clutch plate , aj as 1510 03 051 spring , aj as 1510 03 050 spring plate , aj cw 1510 02 041 toggle block , aj ed 1510 02 080 v belt flywheel to engine , aj rs 1510 04 079 bearing , 4h 262 01 0 00 water pump pulley spa 2 , 4h 052 12 0 00 joint for delivery volute , 50 002 10 060 set bolt m10x 1 pt 5x 60 8 pt 8 , 4h 052 40 0 00 water pump sub assy , 50 002 10 070 set bolt m10x1 pt 5x70 8 pt 8 , 50 506 10 000 plain machined washer m10 , 4h 692 01 0 00 v belt xpa 1280 , aj ed 1510 05 131 release bearing clutch

Central Government/Public Sector

CTN :40461302

29 May, 2025 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of set of fasteners for nmr coach wheels. one set consist of 4 items. item 1) fit bolt for nmr bogies to icf drg. no.aaa02159. - 1 no. note. i) mat erial shall confirm to en8 or similar. ii) fit bolt shall be suitably zinc electroplated to minimum coting thickness of 8 microns with yellowish gleaming to yellow brown iridescent finish. iii) identification details (manufacture's name/logo /brand) shall be suitably embossed/punched/laser marked in 5 mm high letters. iv) thread pitch shall be 3mm to match prevailing torque type hexagon regular nut. item-2) prevailing torque type hexagon nut to iso 7040-m24-8 or iso 7040 -m24-10 as per icf drg. no. 67302014 alt-e, item no.26 -1no. note: zinc electroplated to grade a3l of annexure e of is-1367(part eleven) item-3) washer for nmr pinion arrangement (machined and surface ground) to icf drg no.aaa02149-1no. note. i) material specification to is:2062 e250 a or is:2062 e250 c or is:2062 e250 cu c or irs m-41. ii) finished component zinc electro plated to grade a3l of annexure-e of is:1367(part eleven) item-4) hardened and temper ed washer (for m24 bolt) as per icf drg no.aaa02160 - 1no. note. i) dimensions, material mechanical properties, testing etc. shall confirm to washer iso 70 89-24-200hv ii) after hardening & tempering washer shall be surface grinding. iii) hardened and tempered washer shall be suitably zinc electroplated to mi nimum coting thickness of 8 microns with yellowish gleaming to yellow brown iridescent finish. iv) identification details (manufacture's name/logo /brand) sha ll be suitably done with laser marking. [ warranty period: 30 months after the date of delivery ]