Latest shank scrap Tenders | Government shank scrap Tenders

Central Government/Public Sector

CTN :45332658

05 Jun, 2026 NA

Murshidabad - West Bengal

Tender For tender for supply of conflow spares for chp fstps - spray nozzle , 001.ihm004 , hmc , body joint seal , 001.8829 , hmc , cap locking ring , 001.7149 , hmc , seal , assy , 051.0599 , hmc , drive shaft seal , 001.7287 , hmc , plunger pin seal , 001.7216 , hmc , hose assy , 001-ihm-001 , hmc

CTN :45308681

15 Jun, 2026 NA

Srinagar - Jammu And Kashmir

Tender For stage/rate contract for supply of key material/equipments required for operation/maintenance of 33kv lines and 33/11-6.6 kv receiving stations valid for the financial year 2026-27 or till finalization of next stage contract - power transformers, supply of transformer oil as per is: 335-1993 with latest amendments thereof, supply of buchhloz relay for 33/11-6.6 -6.6 kv transformer protection (10mva / 6.3 mva/ 5mva) as per is 3637:1966, supply of winding temperature indicator (wti) for 33/11-6.6 kv power transformer (10 mva / 6.3/ 5 mva ) as per relevant is 5561 standard., supply of oil temperature indicator (oti) for 33/11-6.6 kv for power transformer (10 mva / 6.3/ 5 mva )as per relevant is 5561 standard., supply of cork sheet 6 mm as per relevant is 5561 standard., supply of old sarees/dhoti cloth, supply of gaskets suitable for power transfomers, 33kv ct&pt, supply of 33/11-6.6kv power transformer (10/6.3/5 mva)bush rods with copper washers as per relevant is 3347 standard., hv side, lv side, supply of 33/11-6.6kv power transformer (10/6.3/5 mva)bushes as per relevant is 3347 standard., hv side, lv side, supply of 11 kv spout bushes (indoor type) conforming to relevant standards ammended up to date, supply of mechanical plunger (conforming to relevant standards ammended up to date ) for, 11 kv breakers (both incoming & outgoing), 33 kv vcbs both indoor & outdoor type, supply of 11 kv partition insulators/ bushes with inbuilt studs of required size conforming to relevant standards ammended up to date as per directions of site engineer, supply of dc connector for 11 kv panels conforming to relevant standards ammended up to date, supply of breather conforming to latest is 3202 (ammended up to date) for 10mva/ 6.3mva/ 5/ 3.15 mva., supply of silica gel as per is :3202, supply of o-ring oil sealing of sizes for power transformer bushes (hv/lv) as per is 3202., supply of galvanised iron angle/channel/flat per is :2062 grade "a" of sorts and sizes, g i channel 100x50x50x6 mm, g i channel 75x40x40x6 mm, g.i angle iron 65x65x6 mm, g.i angle iron 50x50x6 mm, g.i flat iron 40x6/ 50x6 mm, supply of arching horns (set of three pieces) for power transformer, supply of g.i bolt full thread of sorts and sizes with washers and nuts of different sorts and sizes, supply of 33kv current transformer (3-core) of reputed make,outdoor oil cooled, single phase (comprising of 3 no.) (as per is 2705 -1992 having ratio of is (is 2165, is 2705(i-iv), is 2099, is 5621, is 2071, is 335, is 13947(part i), iec 185,iec 270, iec 44(4), iec 171, iec 60, iec 8263, iec 815, indian electricity rules 2010), 400-200/5-5-5 a, 300-150/5-5-5 a, 250-125/5-5-5 a, 200-100/5-5-5 a, supply of 11 kv c.t.(2-core/3-core) of reputed make suitable for 11kv vcb panels (comprising of 3 no.) as per is (is 2165, is 2705(i-iv), is 2099, is 5621, is 2071, is 335, is 13947(part i), iec 185,iec 270, iec 44(4), iec 171, iec 60, iec 8263, iec 815, indian electricity rules 2003) having ratio:-, 800-400-200/5-5a, 750-375-187.5/5-5a, 600-300-150/5-5a, 400-200-100/5-5a, 200-100/5-5a, 150-75/5-5a, 100-50/5-5a, 50-25/ 5-5a, 33kv and 11kv outdoor type potential transformer, supply of 33kv potential transformer (comprising of 3 no.) of ratio 33kv/ 3 / 110v / 3 ,single phase,outdoor oil cooled, dead tank type pt as per is:3156 -1992, supply of 11kv potential transformer 11kv/ 3 / 110v / 3 three phase box type (combo unit) as per is :3156-1992, supply of 11kv potential transformer (comprising of 3 no.) 11kv/ 3 / 110v / 3 single phase seperate type as per is :3156-1992, 11kv and 33kv vcbs, supply of master trip relay 24-50 v rel 615 abb ied suitable for 11kv vcb switch gear panels (compitable for electric feild, pascal, scheinder, abb, essan l&t or any other equilant make), supply of digital protection relay adr 141c, rel 615 /abb ied,model no. er113 2 o/c + 1 e/f with high trip (mit113), auxiliary voltage = 0-36 volt conforming to iso 9001:2008 standards (compitable for electric fe

CTN :45329993

09 Jun, 2026 373

Mandya - Karnataka

Tender For procurement of water suply items for the year of 2026-27 kothathi - pvc fiber 1.1/2pipe 10feet hand borewell, copper wire 2.5mm 90mtr, copper wire 1.5mm 90mtr, cable clamp, motor pump 6hp x 8 stg, winding wire 1.3 mm copper, winding wire 1.1 mm copper, winding wire 1 mm copper, pump 12stg, pump 8stg, motor repair charges 6 hp, motor repair charges 7.5hp, cable 3core 4 sq mm, cable 3core 2.5 sq mm, mn2 realy(14-23), auto.switch, preventer 7.5hp to 15hp, preventer upto 7.5hp, no push button, terminal block, r,y,b indicater lamp, volts.meter, amps.meter, start no push button, stop nc push button, overload realay, wiring.charges, motor repair.charges, start repair charges, lathe work fitting.charges, pump repair charges, motor lifting and eraction.charges, suction case set nbr, non slam check valve, pump shaft, teflon plate, couple, suction plate, bush(rubber+ stainlesss steel), suction, ss counter, setting sleeve, middle, bush seal, bush seal cover, impeller, diffuser, bowl, bowl bush, key, step sleeve, washer., hexbolt, square nut, patti (motor&pump), adaptor (motor&pump), pump nrv, stud, nut, safety valve, brackets, motor pipe, lamination, stator stack, body sleeve, motor shaft, rotor stack, copper lamination, pressure ring, balance ring, rotor assembly, upper.housing, grommet, connection piece, oil seal cover, oil seal rubbar, water bolt, sand guard, v-notch rubber, couple key, couple sleeve, stud ring, lock ring, bush, carbon bush, lower.housing, allen bolt, thrust bearing.plate, circlip lock, base, rocker support, rocker support nut, thrust bearing, thrust bearing segment, til-ting pad(trust pad), pcd cup, pcd plate, drain plug, stainer, cable.guard, winding wire 1.2 mm copper, boltnut 3/8, boltnut 5/8, insulation.tape, rewireable fuse 250 amps 415v, rewireable fuse 100 amps 415v, rewireable fuse 63 amps 415v, sada pannel board7.5hp to 15hp, d.o.l pannel board- 7.5hp to 15hp, sada pannel board 7.5 hp, d.o.l pannel board- 7.5 hp, hp7.5 x 12 stg pump, hp6 x 12 stg pump, hp10 x 12 stg pump, hp10 x 12 stg motor pump, hp7.5 x 12 stg motor pump, hp6 x 12 stg motor pump, plunger rod for hand pump borewell, bore hole casing for hand pump borewell, compression cone for hand pump borewell, riser pipe, bore well handle, cylinder for hand pump borewell, axcel for hand pump borewell, bearing for hand pump borewell, water tank for hand pump borewell, pedstail stand for hand pump borewell, nut & bolt for hand pump borewell, head for hand pump borewell, chain nut & bolt for hand pump borewell, baket washer for hand pump borewell, gi 1.25 inch copler/coller 32mm for hand pump borewell, connecting rod for hand pump borewell, gi 1.25 inch pipe for hand pump borewell, pvc tape roll, mrf tape, shalk threas, pvc 6inch cassing pipe, pvc 4.5inch cassing pipe, pvc 7inch cassing pipe, gi 6inch cassing pipe, gi 7inch cassing pipe, hacksaw blades 12x1/2x24t, garden pipe 1inch, garden pipe 3/4inch, lather nrv, electrofusion welding machine ef, hdpe 1.1/2inch pipe, hdpe 1.1/4inch pipe, hdpe 110mm pipe, hdpe 90mm pipe, hdpe 75mm pipe, hdpe 63mm pipe, hdpe(electrofusin fittings) 110mm tapping tee(belt type), hdpe(electrofusin fittings)110mm tapping tee (clamp type), hdpe(electrofusin fittings) 110mm end cap, hdpe(electrofusin fittings) 110mm reducer, hdpe(electrofusin fittings) 110mm equal tee, hdpe(electrofusin fittings) 110mm elbow 45, hdpe(electrofusin fittings)110mm elbow 90, hdpe(electrofusin fittings) 110mm copler/coller, hdpe(electrofusin fittings) 90mm tapping tee(belt type), hdpe(electrofusin fittings) 90mm tapping tee (clamp type), hdpe(electrofusin fittings) 90mm branch saddle(belt type), hdpe(electrofusin fittings) 90mm branch saddle(clamp type), hdpe(electrofusin fittings) 90mm end cap, hdpe(electrofusin fittings) 90mm reducer, hdpe(electrofusin fittings) 90mm equal tee, hdpe(electrofusin fittings) 90mm elbow 45, hdpe(electrofusin fittings) 90mm elbow 90, hdpe(electrofusin fittings) 90mm copler/coller, hdpe(electrofusin fitting

CTN :45319014

15 Jun, 2026 NA

Khammam-T - Telangana

Tender For supply of pneumatically operated right angle valve model rpv 75 hhv part no vl13002rpv75f , pneumatically operated right angle valve model rpv 25 hhv part no vl13000rpv25f , microvac gauge control unit model mvg 414 without sensor and cable hhv part no hhvtmvg414 , high pressure pirani gauge head model hps 2 for model mvg 414 without cable hhv part no hhvthpsmv , penning gauge head model png 3 for model mvg 414 without cable hhv part no hhvtpng3mv , pirani gauge cable 15mtr long model hps 2 suitable for mvg 414 hhv part no hhvtcapi , penning gauge cable 15 mtr long model png 3 suitable for mvg 414 hhv part no hhvtcapenn , proximity switches with clamp hhv part no hhhvtpc , quartz glasses 6 mm th x 38 mm dia for pyrometer view port hhv part no hhvtt6mm , solenoid valve g25 with plunger coil 24v hhv part no hhvtg2524v , pneumatic cylinder direct mounting with read switch type sme 2 stroke length 200 mm model dgs 25 250 ppv hhv part no hhvdgs25 , pneumatically operated right angle valve model rpv 50 hhv part no hhvt rpv 50 , set of o ring for rpv 25 hhv part no hhv set 25 , set of o ring for rpv 50 hhv part no hhv set 50 , set of o ring for rpv 75 hhv part no hhv set 75 , set of o ring for thermocouple hhv part no hhvt o ring , solenoid valve sdhl0714 x 24dc hydraulic system hhv part no hhv sdhl0714 , solenoid valve sdhl0631by2 x 24dc hydraulic system hhv part no hhv sdhl0631

CTN :45062080

03 Jun, 2026 NA

Aurangabad-Mh - Maharashtra

Tender For corrigendum : supply of milk collection accessories 70 set for setting of new dairy co-operative society (dcs) at village level in chhatrapati sambhajinagar district. under the central sector scheme “national programme for dairy development” (npdd) during 2025-2026. section name :- c) milk collection accessories - 70 set - c) milk collection accessories, milk collection tray, made 1.2mm thick s s 304, size 440 x 590 x 65mm, minimum weight -4200gm. (as per detailed specification & drawing), milk sampler, made from 1.2mm thick s s 304 minimum weight -90gm (as per detailed specification & drawing), funnel with strainer, made from 1.2mm thick s s 304 minimum weight -1600gm(as per detailed specification & drawing), strainer sieve for funnel, material s s 304, measure 100 ml, made from 1.25 mm thick s s 304 minimum weight 125 gm (as per detailed specification & drawing), milk can plunger , made from ss 304 minimum weight-650 gm(as per detailed specification & drawing), milk bucket, made from s s 200 series, seamless with bottom ring, 15 liter capacity minimum weight -1600 gm.(as per detailed specification & drawing), plastic hammer for can opening

CTN :45318187

15 Jun, 2026 NA

Tawang - Arunachal Pradesh

Tender For supply of self recording rain gauge , maximun minimum thermometer digital , screw gauge , prismatic compass with stand , auto dumpy level with stand and staff , abney level , robotic total station 1 inch accuracy bluetooth auto target , kerosene or gas stove or electric hot plate , ghat tracer , pegging rod , optical square 90 degree , ranging rod 3 mtr long , high precision binacular , temperature gun for checking bituminous surface works , sample tray enamelled , vibrating wire , termperature sensor , portable indicator , steel tape 5m , standard pyconometer of 50 ml , digital hygrometer , post hole auger with extensions , rodo meter - high precision wheel odometer , hot plates 200 mm dia 1500 watt voltage 220v to 230v , circular plates of 250 mm dia , sampling pipettes fitted with pressure and suction inlets, 10 ml capacity. , sampling tins with lids 100 mm dia x 75 mm ht 500 gms capacity , electronic digital micrometer , ennore standard sand 25 kgs bag , weighing machine 0 kg to 10 kgs , mould 15cmx15cmx15cm for compressive strength of concrete , digital vernier calipers accuracy 0.001 mm , thermometers mercuryinglass thermometer 0 to 250 c mercury-in-steel , glass thermometers range 0 degree c to 100 degree c 100 degree c , mortar cube 70 pt 6 mm , cbr plunger with settlement dial gauge holder , ring and ball app for softening point , specific gravity test bottle with vaccum pump , tripod stands for holding dial gauge holder , metallic laboratory thermometers range up to 300 c , spacers disc 148 mm dia 47.7 mm ht. with handle , comprising beakers capacity 1000 ml glassware , pipettes capacity 50 ml glassware , perforated plate brass , metallic thermometers range up to 300degree c 300 degree c , specific gravity and water absorption testing machine , marshall sample mould , stop watch one and half sec. accuracy , field density apparutus complete setsand relacment method , compaction test equipment both 2.5 kg and 4.5 kg rammers , cbr moulds 150 mm dia -175 mm ht. , 150 mm x 300 mm ht. cylinder with capping component , riffle box , soaking tank for accommodating 6 cbr moulds , speedy moisture meter complete with chemicals , standard measures of 30, 15 and 3 litres capacity alongwith standard tamping rod , distant reading thermometer 0 degree c 250 degree c , sand pouring cylinder with conical funnel and tap and complete , gi seive set 125,90,75, 63,53,45,37.5, 14, 13.2,12.5,11.2,10,9.5,5.6,4.75mm , water still 20 ltr capacity , glass beakers borosilicate 4 nos of 100 cc, 200 cc, 500cc, 1000cc capacity , pentrometer with standard needles , platform balance 300 kg capacity , drying ovens. thermostatically controlled 100 degree c to 110 degree , water bath electrically operated and thermostatically controlled , dial gauge 25 mm travel -0.01 mm or division , aiv testing apparatus complete set , is sieve sets 450 mm internal dia with lid and pan 30 sieves in 1 set , sieves 450 mm internal dia of sieve sets as per bis of required sieve sizes , is brass sieve sets 200 mm internal dia with lid and pan 35 sieves in 1 set , sieves 200 mm consisting of sieve set of required sieve sizes with lid and pan , is sieve 75,53,45,22.4,11.22 6.5,9.50,5.6,4.75,2.36,1.18mm , soxhlet extraction or centrifuge type apparatus , oven electrically operated, thermostatically controlled including thermometer , sieve shaker capable of shaking 200 mm operated with time switch , weight machine 30 kg electronic type , high frequency mortar cube vibrator for cement testing , specific gravity apparatus , rapid moisture meter is 12175 1987 , flash and fire point apparatus , ductility testing apparatus electrically operated , density testing machine complete set bucket method , rebound hammer concrete testing hammer , furol viscometer , sand equivalent test apparatus , standard sand for density test , lab cbr testing equipment for conducting cbr testing 5 tonne cap , unconfined compression test appratus , marshal stability test machine , los-angeles abrasion te

Central Government/Public Sector

CTN :45118826

05 Jun, 2026 2.92 Lacs

Panipat - Haryana

Tender For corrigendum : supply of stuffing box gasket for uga103a with specifications as per gem technical sheet , stuffing box spring for uga103a with specifications as per gem technical sheet , main bush for uga103a with specifications as per gem technical sheet , main packing for uga103a with specifications as per gem technical sheet , rear packing for uga103a with specifications as per gem technical sheet , stuffing box lantern ring for uga103a with specifications as per gem technical sheet , gland follower for uga103a with specifications as per gem technical sheet , gland follower o ring for uga103a with specifications as per gem technical sheet , plunger for uga103a with specifications as per gem technical sheet , suction valve for uga103a with specifications as per gem technical sheet , suction valve seat for uga103a with specifications as per gem technical sheet , suction valve spring for uga103a with specifications as per gem technical sheet , suction valve cover for uga103a with specifications as per gem technical sheet , suction vlv and cover gasket for uga103a with specifications as per gem technical sheet , discharge valve for uga103a with specifications as per gem technical sheet , discharge valve seat for uga103a with specifications as per gem technical sheet , discharge valve spring for uga103a with specifications as per gem technical sheet , discharge valve cover for uga103a with specifications as per gem technical sheet , disch vlv and cover gasket for uga103a with specifications as per gem technical sheet

Central Government/Public Sector

CTN :45318363

15 Jun, 2026 11.17 Lacs

Sultanpur - Uttar Pradesh

Tender For tender for supply of machining of 62 lines components with hal material - column , column , column , angle , nut , washer , support , stud , bush , bush , bush , thrust ring , stopper , screw , nut , axle , limiter , support , screw , cylender , plunger , stud , column , column , column , roller , axle , nut , washer , bush , support , body , body , column , screw , body , cover , housing , screw , nut , pin , washer , rivet , rod , bush , spring , nut , cover , bracket , frame , strip , indicator panel , plate , chassis , panel(front) , panel(back) , cover , base , plate/support , ring , clamp , cover plate

Central Government/Public Sector

CTN :45338730

13 Jun, 2026 NA

Kalyan - Maharashtra

Tender For supply of set of starter motor spares consist of (1) shift lever assembly delco remy part no.1945484,lucas-tvs part no26249255 or reil part no-95201183 qty- 01 no./set (2) shaft-shift lever delco remy part no. 1948529,lucas-tvs part no 26249362 or reil part no-95201076 qty- 01 no./set (3) snap ring for shift lever & plunger delco remy part no. 9416374, lucas-tvs part no 26249394 or reil part no-95201203 qty- 01 no./set. make delco remy,reil or lucas tvs only. material is to be purchased from oem or an authorized dealer of oem only ]

Central Government/Public Sector

CTN :45336271

29 May, 2026 NA

Ratlam - Madhya Pradesh

Tender For supply of toh kit for rotex magnet valve model no.- 3282 make rotex automation ltd. as per part no.11zp25sb08002. each kit consists of 09 items, 10 nos. (1) piston "o" ring, part no.18 - 01 no. (2) seat seal, part no.19 - 01 no. (3) body "o" ring, part no.20 - 01 no. (4) ma "o" ring, part no.22 - 01 no. (5) plunger assembly, part no.30 - 01 no. (6) guide "o" ring, part no.32 - 01 no. (7) piston glydring, part no.334 - 01 no. (8) manifold"o" ring, part no.194 - 02 nos. (9) coil gasket, part no.35 - 01 no. [ warranty period: 30 months after the date of delivery ] ]

Shank Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector