Latest shank Tenders | Government shank Tenders

Central Government/Public Sector

CTN :41801653

07 Oct, 2025 NA

Nashik - Maharashtra

Tender For corrigendum : supply of h.s.s. twist drill morse taper shank as per is:5103:1969 with amendment no 1 to 3 size: 23.50mm.

CTN :41844490

06 Oct, 2025 20.00 Lacs

Ujjain - Madhya Pradesh

Tender For supply of tools & equipement of various trades for government iti of ujjain zone - measuring steel tape (5 meters), combination plier insulated (length- 200 mm (8 inch)), screwdriver insulated (size: 150 mm x 4mm), screwdriver insulated (size: 150mm x 6 mm), electrician screwdriver thin stem insulated handle (4mm x 100 mm), heavy duty screwdriver insulated (5mm x 200 mm), punch centre (overall length: 150 mm; tip diameter: 9 mm), knife double bladed electrician (size: 100 mm), neon tester, steel rule graduated both in metric and english unit (overall length: 300 mm), hammer, cross peen with handle (weight: 250 grams), hammer, ball peen with handle (weight: 500 grams), chisel firmer with wooden handle (overall length: 200 mm, blade width: 6 mm), allen key alloy steel, bearing puller (inside and outside) jaw open type, scissors blade, ss, scissors blade, ss (blade length: 150 mm), wire cutter and stripper (overall length: 150 mm), hacksaw frame, adjustable frame (300 mm), try square, blade length: 150 mm, pliers long nose insulated, overall length: 150 mm, pliers flat nose insulated, overall length: 200 mm, pliers round nose insulated, overall length: 100 mm, d.e. metric spanner double ended, gauge, wire imperial stainless steel marked in swg & mm(swg 0 36 and metric equivalents (0.30 mm to 8.23 mm)), file flat 250mm smooth, oil can pressure feed system, capacity: 250 ml, hydrometer, portable electric drill machine with impact driver, out side micrometer (measuring range: 0 25 mm), rheostat (sliding type)(rheostat - 0-25 ohm, 2amp), safety helmet, safety belt, digital multi meter, a.c. voltmeter m.i. analog, portable box type housed in wooden case, ammeter mc analog, portable box type housed in wooden case, ac ammeter mi, analog, portable box type housed in wooden case, kilo wattmeter analog, portable box type housed in wooden case, a.c. energy meter, power factor meter (digital 440v, 20a, 3phase, portable), frequency meter (45 to 55hz), tong tester / clamp meter (0-100a digital type), megger (analog - 500 v), single phase transformer, core type, air cooled 1 kva, phase sequence indicator 3 phase, 415 v, soldering iron (25-wattt), soldering iron (65-watt), soldering iron (120 watt), electric iron, a.c. ceiling fan, motor pump set (1 hp, 1 phase, 240v), ceiling fan coil winding machine, fire extinguisher co2, steel rule with metric & british graduation (length: -150mm), caliper hermaphrodite spring type (length: 150 mm), scriber (length: 150 mm), screw driver (overall length-10mmx150mm), chisel (cold flat 20 mm x 150 mm), hammer (ball pein 0.25 kg with teak wood handle), file -flat (second cut 250 mm), file half round second cut (length: 150 mm), safety goggles (for chipping &grinding), dot punch (dimensions:10mmx100 mm), combination set (300 mm), micrometer (outside 0 - 25 mm lc 0.01 mm), universal vernier caliper-range, vernier height gauge (300 mm graduated in metric lc 0.02 mm nabl accredited lab certificate), surface plate c.i with stand and cover, marking table (mild steel), universal angle plate (150mm x 150 mm), punch number set., drill bit (hss twist 3 to 12 mm by 0.5 mm straight shank), taps and dies complete set-in box (5, 6-, 8-, 10-, & 12-mm set of 5 metric), file (knife edge smooth 150 mm), file (triangular smooth 200 mm), file (square second cut 300 mm), file (triangular second cut 200 mm), file flat second cut safe edge. overall length: 300, file (flat bastard 200 mm), file (flat bastard 250 mm), file (half round second cut 250 mm), file (half round bastard 250 mm), file (round bastard 250 mm), file (hand second cut 150 mm), file card 3" x 5" size brass or steel wire), combination plier insulated ( length- 150 mm), spanner set (tubular box 6-32 mm set of 12 with tommy bar), scraper (flat 150 mm), scraper (triangular 150 mm), chisel (cold flat 10 mm x 100 mm), chisel (cold round nose 9 mm x 100 mm), drill chuck (morse taper 0 - 12 mm), pipe wrench (400mm), pipe vice (cast iron with hardened jaw

CTN :41856221

08 Oct, 2025 NA

Guna - Madhya Pradesh

Tender For supply of various lab equipments items for govt. pg college guna district guna (m.p.) - supply of various lab equipments items for govt. p g college guna district guna (m.p.), waterand soil testing analysis kit (digital) : range ph 0 to 14.00 resolution ph 0.01 accuracy ph 0.01 1 digit temp. comp. 0 to 100 deg. c., water bath (06holes) : 6 hole8 ltrs., waterbath(12holes) :12 hole 20 ltrs., water distillation apparatus(single distillation unit 2 litre/hour) : single distillation 5 litres, analytical balance : least cosunt 0.0002g, analytical weight box : 1-100g, fractional weight box : 1-500mg, physical balance : 250gm accuracy 0.1g, digital balance : least count 1mg, single pandigital balance : 0.1mg 200g, digital photoelectric colorimeter : 8 filter,1 ml, digital potentiometer : with hot plate and electrodes, digital conductometer : with cell 1cc and 0.1cc, d.o. meter : polarographic do range: typically 0 to 90 mg/l (milligrams per liter) or 0 to 600% saturation.rdo (optical) do range: usually 0 to 50 mg/l or 0 to 500% saturation., digital naphelo/turbidity meter : digital turbidity cum nephelometer range:-, 200,1000 ntu/jtu resolution:- 0.01 ntu/jtu accuracy:- 3% fs, 1digit display:- 3 digit 7-segment led light source:- ir led detector:- photodiode sample system:- 60 x 25mm clear glass test tubes power:- 230 v 10% ac, 50 hz accessories:- test tube set of 2, operation manual, dust cover, polarimeter half shade : the specific rotation ( ) is a physical property defined as the optical rotation at a path length of 1 dm, a concentration of 10 g/l, a temperature (usually 20 c), and a light wavelength (usually sodium d line at 589.3 nm), melting point apparatus :melting-point measurement range: room temperature - 400 c setting rate of the starting temp. : 50 c~400 c 5 min; 400 c~50 c 7 min minimum digital display: 0.1 c size of the capillary: 1.4mm (outside diameter) 1.0mm (inside diameter), 90mm equipped with color camera and color monitor to observe melting point with ease validation program for standard samples 8 operator names can be storedgraphic lcd display to display all test parameters & test instructions, digital melting point apparatus :melting point measurement range : ambient to 300 deg c starting melting point temperature : settable from 50 to 300 deg c heating time : 3 minutes (up to 300deg c) cooling time : 5 minutes (from 300 deg c) accuracy : +/ 0.5 deg up to 200 +/ 0.8 deg from 200 to 300 temperature display resolution : 0.1 deg c rate of heating (deg c per minute), abbe refractometer : safety bs en 60950-1:11/2006 emc en 55024 : 10/2003 en 55020 : 11/2005, tlc kit : outstanding standardization and quality control exceptional adherence, hardness and surface homogeneity. analyzing samples with high matrix- load without sample preparation. multiple samples analyzed in parallel.highly cost-efficient, fast and economical, centrifuge : 6000rpm, corkboring machine :adjustable guide that permits holes to be bored in any part of a stopper, the knurled chuck - 9/16" (14mm) shank of the eight, plated-steel borers included with the unit. the steel borers range from 3/16" to 5/8" (4.8mm to 15.9mm) in 1/16" (1.6mm) increments,, distillation apparatus : single distillation 5 litres, oven hot air : 14" 14" 14 , voltage stabilizer : 2kv, vertex shaker : 6 tube capacity, mixer small : moter capacity 900 watt, water bath(cu) : 4 , heating mantle with energy regulator : 500 w,2litre, single crucible heater : helical wire coil moldatherm insulation platinel ii thermocouple with 10tm compensated lead wire and polarized plug ceramic fiber hearthplate programmable heat-up to setpoint temperature indicates setpoint and process temperatures temperature: 1200 c (2192 f) maximum crucible sizes: 5 (top vestibule id) x 8 (heated depth), water bath rectangularsingle walled : 6 hole 8 ltrs., water bath rectangular :2 hole, kjeldahl distillation unit : unit of 3 tests, microwave oven : 30 ltr convection compatible, soleextractionunit apparat

Central Government/Public Sector

CTN :42122154

16 Oct, 2025 NA

Bhopal - Madhya Pradesh

Tender For supply of dovetail rh grooving tool, tool have 40 mm by 40 mm plus minus 10 mm shank with 350 length , dovetail lh grooving tool, tool have 40 mm by 40 mm plus minus 10 mm. shank with 350 length , insert suit to item 1 and 2 to make proper groove as per sketch enclosed , steel clamp or lever , shim suit to item 1, 2 and 3 , shim screw , slotted spring or screw

CTN :42125456

16 Oct, 2025 NA

Surat - Gujarat

Tender For supply of twist drills, parallel shank, jobber series as per is 5101 (q3)

CTN :42132725

24 Oct, 2025 NA

Durg - Chhattisgarh

Tender For supply of group 1- collet adaptor for cnc milling , group 1-sleeve adaptor , group 1-sidelock adaptor for cnc milling , group 1-hydraulic adaptor for cnc milling , group 1-boring head with set for cnc milling , group 2-solid carbide end mill for cnc milling , group 2-inserted type end mill cutter for cnc milling , group 2- inserted type end mill cutter for cnc milling , group 2- u drill dia 12 mm to 25 mm 1 mm increment , group 2-drill bit , group 2-taper shank drill bit , group 3-external turning holder for cnc turning , group 3- external grooving tool holder for cnc turning , group 3- external thread cutting tool holder for cnc turning , group 3-boring holder , group 3-internal grooving tool holder for cnc turning with initial set of inserts , group 3-internal thread cutting tool holder for cnc turning with initial set of inserts

Central Government/Public Sector

CTN :42133710

07 Oct, 2025 NA

Rourkela - Odisha

Tender For requirement of twist drill.(1items) comprising of following: 1 - twist drill,taper shank,hss,27mm ,

Central Government/Public Sector

CTN :42145351

24 Oct, 2025 NA

Mumbai - Maharashtra

Tender For supply of twist drill,morse taper shank of designation %u201ctwist drill 7.00 is 5103 hs%u201d conforming to is 5103:1969 with amendment no 3 of december 1996

Central Government/Public Sector

CTN :42127750

13 Oct, 2025 NA

Vadodara - Gujarat

Tender For supply of coupler body with shank wears plate (welded) for upgraded high tensile non-tr cbc to rdso drg. no.sk-62724, alt.31,item-1 & 10

Central Government/Public Sector

CTN :40977690

06 Oct, 2025 NA

Haridwar - Uttarakhand

Tender For bid to ras tender for supply of carbide insert : : - carbide insert , milling insert , milling insert , plunging tool , plunging tool , carbide insert , parallel shank , carbide insert , insert screw , screw key , parallel shank , carbide insert , insert screw , milling cutter , carbide insert , allen key

Shank Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector