Latest shaping machine Tenders | Government shaping machine Tenders

Central Government/Public Sector

CTN :45713879

20 Jul, 2026 NA

Jorhat - Assam

Tender For repairs to compound wall, fencing and gate with connected items in domestic area and omq area at afs under ge (af) jorhat - demolition of brick work built in cement mortar of any description complete all as specified and as directed., m&l for brickwork (old size) with sub class b bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed., all as per serial item no. 2 here-in-before but except bricks, using old serviceable brick as retrieved from demolition.note : old serviceable bricks obtained from serial item no. 1 above shall re-used., taking down cement plaster on brick or stone or concrete surfaces of walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed., m&l for rendering 15mm thick on fair face of brick works or concrete surfaces of walls with cm (1:4), finishing the surface even and smooth without using extra cement complete all as specified and as directed., m&l for preparation of new plastered surfaces of walls and applying two coats of cement base paint over and including one coat of alkali resistance primer complete all as specified and as directed., demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed., m&l for plain cement concrete (1:2:4) type b-0 (using 12.50mm graded stone aggregate) used as in benching and coping including necessary formwork complete all as specified and as directed., m&l for brickwork with sub class b bricks, straight or curved on plan to any radius in half brick thick walls, built in cm (1:4) complete all as specified and as directed., m&l for dismantling posts or struts (wood, steel or rcc) any section, including taking out embedded portion and making good to disturbed ground surfaces complete all as specified and as directed., m&l for plain cement concrete (1:3:6) type c-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete, etc. complete all as specified and directed., s&f hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing, etc. wind ties for roof including securing bolts posts and struts in fencing of size 65x65x6mm including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to fe-290 gde e-165 complete all as specified and as directed., dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed., s&f 11mm to 15mm dia of shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and onehexagonal or square nut, but length of bolt exc. 5cm but n. exc. 10cm complete all as specified and as directed., excavating in post holes (or similar holes) each n. exc. 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exc. 50m and making good surface as in soft/loose soil complete all as specified and as directed., m&l for preparation of new steel and iron surfaces of any description over 10cm width or girth not otherwise described for and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and as directed., m&l for mild steel tmt bar 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends binding wit

CTN :45416078

13 Jul, 2026 NA

Cuttack - Odisha

Tender For corrigendum : supply installation and commissioning of mechanical equipment for different govt itis and polytechnics of odisha - lathe s.s &s.c. (all geared type) , solid works , universal milling machine , powersaw machine , pipe bending machine , tool and cutter grinder , pillar type drilling machine , double ended pedestal grinder , air compressor , surface plate - granite , battery operated pallet truck , cylindrical grinding machine , radial drilling machine , absorption and stripping , equipment , shearing machine , surface grinding machine , hyadraulic surface grinding , machine , hand drill machine , horizontal milling machine , demarcation equipment , universal cylindrical grinding , machine , gear pump test rig , battery operated order picker , sensitive bench drill machine , shaping machine , hydraulic pressure testing , machine , plotter , vertical milling machine , power hacksaw machine , co-ordinate measuring machine , screw pump , breaker machine , battery operated fork lift , band saw machine , hdpe butt fusion welding machine , portable drilling machine , horizontal milling machine , turret ram milling machine , silicon carbide grinder , profile projector , slip gauge as johnson metric , set , vertical milling machine , slotter machine , hydraulic pipe bending machine , electric pressure , test pump machine

Central Government/Public Sector

CTN :45702785

03 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot miscellaneous scrap - cond & u/s machineries with /without motor consisting of 1)shaping machine bearing s.no: 161091 and make: batla bhai & co, 2)universal milling machine bearing s.no: 2886 & make: hmt/fn-2eu, 3)lathe lb-17 bearing s.no: 10073 & make: hmt, 4)radial drilling machine bearing s.no: 7379 & bmake: hmt/r-62(in dismantled condition), 5) shaping machine type/csm/63 bearing s.no: 17943 & make: cooper , 6)shock absorber dynamic capacity testing machine bearing s.no: 15/84 & make: m/s escorts ltd , with available attachments in as is where is condition.adive note no: 022688-25-11000 dt 27.02.26. custodian: sse-emu-avd. location: backsiide of emu workshop/avd note: dismantling and crane/jcb/forklift loading permitted. approx lot weight: 9445.5 kg. pl no. 98322000.

Central Government/Public Sector

CTN :45382504

03 Jul, 2026 NA

Medak-T - Telangana

Tender For corrigendum : special purpose shaping machine rotor

Central Government/Public Sector

CTN :45619712

26 Jun, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot miscellaneous scrap - 1) scrap/condemned shaping machine, size: 24¿ make/supplier: m/s. indian sugar and general engg- j. nagar. 2) scrap/condemned slotting machine, size- 24¿, make/supplier: m/s. ormerod. cutting and dismentling allowed. lot is formed as is where as basis. purchasers are advised to inspect the lot before bidding.

CTN :45623120

29 Jun, 2026 NA

Ahmedabad - Gujarat

Tender For supply of shaping machine

CTN :45605519

23 Jun, 2026 4.87 Lacs

Baran - Rajasthan

Tender For requirement of champion make machine spares for workshop installed at chp,ctpp,chhabra - norton gear box , apron box with worm set , thread chart , lathe machine(model c-600) , tool post with bolts(set of 8) , thread chart , hydraulic pump set , coolant system with assembly , magnetic attachment , tool & cutter grinder , magnetic attachment , universal vice (3 axis)-size 4" , drill machine , adjustment pin set , tension spring set , arbor set(sleve/socket set) , drill chuck , shaping machine , (model: 24"medium stroke) , slotted crank block , pinion gear set , main machine gear(crank gear) , slotted arm/slotted lever , main head stock spindle shaft , rev./forward gear set with assembly unit , drum pulley , counter pulley , tool post with bolts(set of 8) , thread chart

CTN :45505858

25 Jun, 2026 NA

Koderma - Jharkhand

Tender For supply of pcb fabrication lab , pcb prototyping machine , safety devices on haulage road , shot hole pattern in a sinking shaft , plumbing or shaft centring arrangements for a sinking shaft , shot hole patterns , types of roof support by timber , chock with four corner props , chock release device , tapered props , side and roof support in a roadway , roof bolting , magnetic unlocker for flame safety lamp hand held type permanent magnet , tool kit for servicing and maintenance of flame safety lamp , flame proof lamp fitting for dark room of gas testing , drill rod and drill bit , air leg , lubricator , exploder dgms approved twenty five shot capacity max resistance one hunderd fifty nine ohms, one and half a firing current, non volt battery, dc output five hunderd volt , scraper cum brake detector , stemming rod , metric chain size twenty meter , metric chain size thirty meter , engineering chain , revenue chain , gunter chain , steel tape fifteen meter , steel tape thirty meter , metallic tape,

CTN :45412087

18 Jun, 2026 NA

Theni - Tamil Nadu

Tender For supply of crdi engine for passenger car, red wood viscometer, computerized automatic flash point analyzer and gear shaping machine of mechanical engineering - supply of crdi engine for passenger car, red wood viscometer, computerized automatic flash point analyzer and gear shaping machine for mechanical engineering

corporations/Associations/Others

CTN :45383960

17 Jun, 2026 NA

Barauni - Bihar

Tender For quotation for v belt b-85 ,g.i. trunk 5' x 2.5' x 2.5' (sheet tata make) (material thikness 24 gauge) ,ball bearing 6203 zz (make skf) ,chain pulley block 2 ton x 6 mtr (make-taparia) ,chain wrinch 3" (make-taparia) ,conveyor belt for rounder (ball shaping machine l10,2" w:1'1" t:1.5mm)

Shaping Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others