Get complete information related to latest Sheet Angle Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Sheet Angle Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Sheet Angle Tenders.
Tender For corrigendum : supply of acid unloading pump and spares d d - 1. supply of antico make end suction horizontal centrifugal acid unloading pump model - exp 55 ct.- q-m3-hr- 14.00 h- m- 12.00 , 2. supply of spares for antico make exp 55 ct pumps - volute casing, hsn code - 84139120, part no. - 70210101, moc - polypropylene. , 3. supply of spares for antico make exp 55 ct pumps - impeller, hsn code - 84139120, part no. - 70210103, moc - polypropylene. , 4. supply of spares for antico make exp 55 ct pumps - adopter, hsn code - 84139120, part no. - 70210504, moc - cast iron. , 5. supply of spares for antico make exp 55 ct pumps - leg, hsn code - 84139120, part no. - 70210505, moc - cast iron. , 6. supply of spares for antico make exp 55 ct pumps - cage ring, hsn code - 84139120, part no. - 70210506, moc - cast iron. , 7. supply of spares for antico make exp 55 ct pumps - locating flange, hsn code - 84139120, part no. - 70422926, moc - frp. , 8. supply of spares for antico make exp 55 ct pumps - drip tray, hsn code - 84139120, part no. - 70900001, moc - polypropylene. , 9. supply of spares for antico make exp 55 ct pumps - bolts for clamping seal, hsn code - 84139120, part no. - 77000620, moc - polypropylene with ss 316. , 10. supply of spares for antico make exp 55 ct pumps - bearing housing, hsn code - 84139120, part no. - 70110507, moc - cast iron. , 11. supply of spares for antico make exp 55 ct pumps - bearing cover o ring, hsn code - 84139120, part no. - 73030729, moc - neoprene. , 12. supply of spares for antico make exp 55 ct pumps - bare shaft for ceramic sleeve, hsn code - 84139120, part no. - 75211702, moc - en-24. , 13. supply of spares for antico make exp 55 ct pumps - shaft sleeve, hsn code - 84139120, part no. - 73312901, moc - ceramic. , 14. supply of spares for antico make exp 55 ct pumps - circlip, hsn code - 84139120, part no. - 75600726, moc - steel. , ) /bid number : gem/2026/b/7211623 * /dated: 13-02-2026 & & / bid document 1 / 23 15. supply of spares for antico make exp 55 ct pumps - star washer, hsn code - 84139120, part no. - 75900006, moc - steel. , 16. supply of spares for antico make exp 55 ct pumps - lock nut, hsn code - 84139120, part no. - 75800006, moc - steel. , 17. supply of spares for antico make exp 55 ct pumps - impeller o ring, hsn code - 84139120, part no. - 73030192, moc - neoprene. , 18. supply of spares for antico make exp 55 ct pumps - stationary ring for mechanical seal, hsn code - 84139120, part no. - 73900040, moc - ceramic. , 19. supply of spares for antico make exp 55 ct pumps - rotary unit for mechanical seal, hsn code - 84139120, part no. - 73500041, moc - glass filled ptfe. , 20. supply of spares for antico make exp 55 ct pumps - constant level oiler, hsn code - 84139120, part no. - 71950400, moc - aluminium-plastic. , 21. supply of spares for antico make exp 55 ct pumps - cagering hardware, hsn code - 84139120, part no. - 74370631, moc - ms cad plated. , 22. supply of spares for antico make exp 55 ct pumps - oil drain, hsn code - 84139120, part no. - 71850400, moc - ms cad plated. , 23. supply of spares for antico make exp 55 ct pumps - oil vent, hsn code - 84139120, part no. - 71750400, moc - ms cad plated. , 24. supply of spares for antico make exp 55 ct pumps - ring for back plate, hsn code - 84139120, part no. - 76350703, moc - carbon filled ptfe. , 25. supply of spares for antico make exp 55 ct pumps - angle, hsn code - 84139120, part no. - 71210330, moc - ms. , 26. supply of spares for antico make exp 55 ct pumps - drip pan for base frame, hsn code - 84139120, part no. - 71000001, moc - polypropylene. , 27. supply of spares for antico make exp 55 ct pumps - back plate for mechanical seal, hsn code - 84139120, part no. - 70210502, moc - polypropylene.
Tender For corrigendum : supply of ms sq pipe for flex frame 1x1x3mm,ms sq pipe for flex frame 2x2x3mm,flex sheet nos of flex 220,welding rod 3pt1 mm,cutting disc 14 inch,cutting disc 4 inch,brick,cement,sand,agg 10mm,tmt bar 8mm,binding wire,ms angle 25mmx25mmx3mm,pgi sheet 4x4x0pt5mm,slider,hinges 3 inch,welding rod no 10,15 amp modular switch,15 amp modular socket,modular sb 3 module way with gi gang box with sheet,modular sb 6 module way with gi gang box with sheet,twin core service cable aluminum 10 sqm,pvc single core ms copper wire 2pt5 sqmm,insulation tape,plastic coated sheet 250 gsm 22x28,plastic coated sheet 100 gsm a4 size,plastic coated sheet double side 250gsm 23x36,ivory sheet 250 gsm 22x28,coated sheet 250 gsm 22x28,golden colour sheet 250 gsm 22x28,ink kmc pro cymb 1 ltr btl,kmc pro solvent,century paper a4,glue glue binding machine gbt,cartridge black ricoh im c3010ex,tissue paper,ms sq pipe 3by4 inch x3by4inchx3mm,grinding disc 4 inch,6 amp stainless steel combination,wire 1pt5sqmm copper,bed switch,bulb warm white 10w,black
Tender For auction sale of depot ferrous scrap - scrap ferrous melting consisting of coach cutting parts, window & seat & bearth frem, eo. stay,no. plate side frame key, shuckle stone ,brake shoe head,shock absorver,bond strip, m.s&g.i.pipe & sheets pipe fitting,doors& gate, fabricated structure,wire&wire rope, plane & twisted bar, cut up strips of sheet,plate, flat, angle,slack adjuster, lower spring seat,battery box, broken helical spring up to single coil, helical spring up to 03 coil, nut, bolt, pin, washecotter,fencing,empetyelectric panel, /box,switch board, wheel barrow of sorts, dummy, beater, rake blast,tirfor,rachet,pull lift, follen rod, bucket, pan, empty fire- extinguisher, foot step, foot rest plate,silent block, pandrol clip,brake beam, gear case, m.s. chain, ring,bmbc cover,trd bracket, linner, side bearer& other various melting items released from loco, carriage, trd, tmc, sig, electric of sorts & sizes with steel, c.i & neg. n.f. attachment if any. note:-1 loading by puchases 2. cutting allowed for loading purpose. 3. days alloted for cutting 20 days & during loading time also. 4. other than melting if found during cutting will be seprated and not delivered to purchaser. 5. delivery not allowed againt part payment. location: lying at line no -12 & oil godown in plote-a
Tender For auction sale of others - released condemned & u/s ms scrap consisting, { angle, channel, flate plate, pipe, door, gi sheet, grill jail & window with and without frame, jaffery, rail off size, reinforcement bars, tie bar, tie bar fencing etc.}, total qty-20.00 mt, location- sse-w-w-ujn store near qtr no. 277. mode of delivery by actual weighment basis and on as is where is basis, custodian sse-w-w-ujn, fdp-50 days. note- cutting permitted for loadable size only not into small pieces.
Tender For auction sale of depot ferrous scrap - 14.04.25.06.2024 a = 20.000 mts scrap junk kachra consisting of corroded mesh pcs of tin, strips, oil tin, ash pan, expend metal wire basket, ms/gi wire ,filter, jalees, ms lamps, signal lamps, damaged rusty/ broken pcs of wire rope, electric fitting & bulb cover, ms board, frame, rusty damaged broken hand carts, released rusty ms door windows and their frames, broken small boxes, cupboards ,racks, coach sheet , loco casing covers, ms rusty chairs ms rusty table frame, rusty gi sheet & strips, gi & ms point machine covers, , cond bicycle ms broken condition oil barrels, paint drums, angle condemned fire extinguisher, fire bucket ms chairs ,ms racks, with or without minor nf attachment,, pipe pcs, corroded damaged rusty electric fitting items with or without minor nf attachment, if any. location: area b, adj. to near line no 06 near by rpf security tower to line no 06 end. stock holder : dms ward no. 04/ smm(md)mmr remarks: itis advised to bidder to see the lot personally before bidding the lot
Tender For supply of , health faucet with hook 1 mtr tube cp , helical door spring 300mm length , hydraulic door closer isi mark , hydraulic door closer heavy duty isi mark , kitchen sink l 36 inch w 18 inch stainless steel with drainage board , kitchen sink l 45 inch w 20 inch stainless steel with drainage board , kitchen stainless steel sinks with single bowl without board size l 24 inch w 18 inches , kitchen steel plate rack l 30 inch w 30 inch kitchen rack ss l 30 inch w 30 inch w 10 inches , m seal , mirror cabinet bathroom pvc 500 mm into 400 mm , mirror looking l 24 inch w 18 inches with pvc frame , paining brush 75 mm , paint enamelled black , paint enamelled og , paint enamelled red po , paint enamelled white , paint red oxide , painting brush 100 mm , painting brush 50mm , plywood l 6ft w 3ft w 12 mm bwr grade , plywood l 8ft w 4ft w 12mm bwr grade , plywood 8ft x4ft x4mm , plywood l 8ft w 4ft w 6mm bwr grade , pvc urinal waste pipe 40 mm dia 750 or 800 mm long , pvc waste pipe 32 mm 750 or 800 mm long , seat cover plastic for ewc white colour , pvc shower round 150mm dia , shower sandwich rain l 6 inches w 6 inches 150mm long , single lever sink mixer 15mm single lever square type , sliding door bolt alu 250mm rod dia 16 mm , sliding door bolt alu 300mm rod dia 16 mm , sliding door bolt ms 250mm rod dia 16 mm , sliding door bolt ms 300mm rod dia 16 mm , cp soap dish , ss holder for curtain rod , cp stop valve angle 15mm rubal type , super flash strip 50mm width 1 point 5mm thick in a roll of 10 mtrs make stp limited , swan neck center hole basin mixer single hole 15mm rubal type , thinner , cp toilet paper holder , toilet seat type-ii wc indian type 580 mm , cp towal ring , towel rail 18mm dia 600mm long , towel rail rack ss 600 long 24 inches , pvc towel ring 900x18mm , tower bolt alu 100 mm bolt dia 12 mm , tower bolt alu 125 mm bolt dia 12 mm , tower bolt alu 150 mm bolt dia 12 mm , varnish , cp wall mixer telephonic with divertor 15mm , cp waste coupling fitting 32mm , water storage tank 1000 ltr 3 layer isi mark , wire mesh gi width 1200 mm 15 mtr length 0 point 36 mm nominal dia of wire and average width of aperature 1 point 18 mm , cover for water tank 500 or 1000 ltrs
Tender For auction sale of depot ferrous scrap - ms scrap consists of cond. girder channel angle structure door window railing gate flats and other various type of structure fittings girder structure/scull base ms pipe railing grill jali window with or without jali and pipe attachment, bearth sheet frame, and other similar items received from engg department other railway sources lying in two stacks one in plot no. 8 and new ivri plot. (cutting allowed) [hsn 72044900 gst 18%]
Tender For auction sale of depot ferrous scrap - ferrous scrap consisting of cut of sheets, angle,plates. channel, rivetts,pipes,bk.cylinder, reservoir tank, doors,side pillars,bk.gear components, tie bar pieces, screw coupling, equalsing stay rod,bk.shoe,hanger, wedge rod.side bearer housing.safety loops, horncheek, draw bar hook. buffer plunger.buffer socket, treversing base of screw jack, and coach/wagon and misc.components & railway hospital cond. items etc. qty. 25.000 mts. approx sse ss-11 no. sse/c&w/g/et/07 dt.23.01.2026 note: 1.delivery of lot by actual weighment. 2.quantity has been assessed on approximate basis subject to variation(+/-10%) during delivery by actual weighment. 3.cutting may be allowed for easy loading.
Tender For auction sale of others - 98050035 u/s ms sheet consisting of cut pieces of side and end panel with lirries, flat, angle, channel, angle frame, door stiffener with attachment if any etc.(stack 01). qty. 60mt. for stock holder sse/c&w/g/kota. ss-11 no.- sse/c&w/g/ktt/2025-26/c/13 date 12.01.2026. ds-8 no. 043386 date 12.01.2026 lot should be sold on as is where is basis. purchasers are requested to see the lot/site and approchable road before bidding. no claim will be entertained after sale of lot.the stock holder is responsible for any alteration, deletion & variation in the lot or in weighment or tempering with the lot will be solely responsibility of stock holder after joint inspection, if any found subsequently.bidder must submit the fixation of the delivery date through the ireps e-auction sale module at least 7 days prior to the delivery date. delivery will be given by actual weight from govt. approved dharam kanta.material are lying in rajasthan state