Latest sheet pile Tenders | Government sheet pile Tenders

CTN :45057902

22 May, 2026 8.00 Lacs

Udhamsign Nagar - Uttarakhand

Tender For supply of a4 size paper , white board marker , pencil sharpener 04 pcs , pencil packet of 10 black , highlighter pen , stapler pin 9.3 mm width , stapler pin 7.1 mm width , sketch pen , flip chart sheet , xerox tonner hp 137a , register 100 pages , cello tape medium , cello tape coloured- 04 colours , file cover for 21.5 cm x34.5 cm , all pin , information folder , stick note page marker , mfr participant book , cssr participant , plastic folder , xerox tonner refilling , latex rubber gloves , face shield barrier device for cpr , face mask , disposable paper cup , batteries aa size , oxygen cylinders refilling , refilling of fire extinguisher , dust mask , ear plugs , spray paint fluorescent , 2.5 inch peni nails , 4 inch peni nails , cement , 10 to 20 mm steel bar mix , 8 mm steel bar sariya , binding wire , crushed stone aggregate 20 mm , crushed stone aggregate 10 mm , coarse sand , bricks , plywood 13 mm thick 4x4 feet , metal sheet 6 mm 4x4 feet , aqueous fill foaming foam 0.5 ltr , concrete slab 4x4 feet , cgi sheet 12x4 feet , fuller earth , poly bag , poly sheet roll , bleaching powder

CTN :45021933

05 May, 2026 4.86 Lacs

Mysore - Karnataka

Tender For construction of an indoor stadium (with cellar parking ) using peb (pre-engineered building) structure including structural steel frame work, deck slab, puf panels, acp cladding, internal water supply sanitary installations, internal electrical installations, vrv/vrf, fire alarm, fire fighting, lifts networking system and cctv at rie, mysore sh- providing 1 no. driver to department vehicle ka01 n6455.

Central Government/Public Sector

CTN :45053901

20 May, 2026 NA

Rourkela - Odisha

Tender For supply, installation and commissioning of two (2) nos. of cabin acs for slab handling cranes nos. 2161 and 2162 of sms-ii for rourkela steel plant

Central Government/Public Sector

CTN :45056623

29 Apr, 2026 16.80 Lacs

Rourkela - Odisha

Tender For supply, installation and commissioning of two (2) nos. of cabin acs for slab handling cranes nos. 2161 and 2162 of sms-ii for rourkela steel plant

Central Government/Public Sector

CTN :43842778

03 Feb, 2026 2200.00 Crore

Bokaro - Jharkhand

Tender For corrigendum : thin slab casting and direct rolling plant (tscdr) for brownfield expansion of bokaro steel plant

corporations/Associations/Others

CTN :45021663

05 May, 2026 NA

Valsad - Gujarat

Tender For annual rate tender for purchase of materials of construction / road resurfacing for year 2026-27 - brick, sand, kapchi 25 to 40 mm, grit 6 to 10 mm, handmade metal 40 to 63 mm, rubble 9 inch, cement (53 grade) 50kg, tor steel, 60 mm rubber rise, m40 paver block, 80 mm rubber rise, m40 paver block, g.s.b., dust (powder), brick masonry (1:6), stone masonry (1:6), plaster (1:4), r.c.c. slab filling 1:2:4, (to give the price of steel separately in kg), r.c.c. slab filling 1:1/2:3 (to give the price of steel separately in kg), p.c.c. (1:3:6), p.c.c. (1:4:8), pointing (1:2), yellow soil, hard murrum, handmade metal, np3 pipe 300mm, np3 pipe 450mm, np3 pipe 600mm, np3 pipe 900mm, np3 pipe 1200mm, j.c.b machine (including diesel driver), roller (including diesel driver), truck (including diesel driver), hydraulic center trailer (including diesel driver), semi dense carpet patch work on various roads in pardi municipal area, building materials and soil lifting work from pardi municipal area, compounding of tarkhuta in pardi municipal area (excavation including five wire, cross wire, cement pole), waterproofing, two coat putty or two coat of primer (including brushing), wall painting (three coat) with plastic emulsion paint, ceiling painting (three coat) with plastic emulsion paint, outer wall painting (three coat) with weather proof acrylic emulsion paint including priming coat, box cutting the road surface to proper slope and camber for making a base for the road work including removing the excavated stuff and depositing on the road side slope as directed upto 50 mt lead., scarifying gravelled macadam or bitumen macadam surface 6 cm to 10 cm depth including stacking useful materials on road side and disposing off remaining stuff, construction of granular sub-base by providing well-graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix-in place method with rotavator at omc and compacting smooth wheel roller to achieve the desired density, complete in two layers as per technical specification clause 401., providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density in two layer. by mechanical means with 1 km lead, providing and laying bituminous base course 75 mm thick compacted in two layers with tack coat of asphalt (vg-30) 80/100 at the rate of 2.5 kg/10 sqmt and using b.t. stone aggregates of required gradation and asphalt 80/100 grade for mixing @ 1.99% by weight of total mix including heating the aggregate and asphalt by drum mix plant and spreading the same by paver finisher and consolidation with vibratory roller including providing all materials, equipment’s, tools and plants, oil, kerosene, fire wood, labour charges etc. complete., providing and laying 50mm thick compacted b.m. with b.t. aggregate as per mort&h specification and asphalt grade (vg-30) 80/100 for tack coat at 2.5 kg/10 sqmt with mechanical sprayer and bitumen grade 80/100 for mixing at the rate 34.0 kg/m.t. i.e. 3.4% of total mix including heating the aggregate and asphalt by drum mix plant and spreading the same by paver censor finisher and consolidation with vibratory roller including providing all materials, equipments, tools and plants, oil, kerosene, fire wood, labour charges etc. complete., providing and laying 25 mm thick compacted semi dense bituminuous concrete using stone chips as per mort&h gradation and asphalt grade (vg-30) 80/100 for tack coat at 2.5 kg/10 sqmt with mechanical sprayer and 80/100 grade asphalt for mixing @ 5.0% by weight of total mix for binder including heating the aggregate and asphalt by drum mix plant and spreading the same by paver finisher and consolidation with vibra

Central Government/Public Sector

CTN :45036955

26 May, 2026 NA

Jalgaon - Maharashtra

Tender For udhna- jalgaon section-re-girdering of existing steel girders, preparation of gad, desigining etc, transportation of slabs & retainers from casting yard to bridge site & launching new slab, retainers after strengthening of bridges in running track.(two packet system).

State Government

CTN :45017401

12 May, 2026 3.12 Lacs

Mormugao - Goa

Tender For dismantaling of existing old railing and providing and fixing s.s. railing (stainless steel) with masonary base and top with granite slab finish along with painting for the existing retaining wall near toilet block on bogmalo beach road in ward no. iv bailichall in v. p. chicolna bogmalo through panchayat fund

Corporations/Associations/Others

CTN :44974143

30 Apr, 2026 NA

Multi City - Karnataka

Tender For providing and fixing stainless steel gold railing of grade 304 railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature and fitting the same with necessary stainless steel nuts and bolts complete, that is fixing the railing with necessary accessories stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of engineer-in- charge, for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc. including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the engineer-in-charge.

Central Government And Public Sector

CTN :44909998

02 May, 2026 14.67 Lacs

Koppal - Karnataka

Tender For supply of instruments , consumables & equipments to dental department kims koppal. - ultra-thin imaging, powerful processing, wireless touch screen psp scanner for precise dental diagnosis., ultrasonic scaler with sealed handpiece and two modes for scaling with 5 scaler tips ., precise, push-button control, slow-speed contra angle handpiece., straight handpiece ergonomic design., high-speed airotor with led illumination and ergonomic design for precise dental procedures., dental clinical micromotor complete set., lag screw oral surgery., ttianium plates set of 10., ttianium plates- set of 6., ttianium plates- set of 4., screw holding box., maxillofacial self holding screw driver 2.5 mm., maxillofacial self holding screw driver 2mm., maxillofacial self holding screw driver 1.5mm., histers mouth gag., towel clip doyens or schadel or jones type small size 3-4 inch., cheek retractor ., artery forcep-small,curved ., artery forcep-small, straight ., fergussons jaw opener-pair ., tongue depressor-, periosteal elevator small., mayo dissecting scissor curved., allis tissue grasping forceps 15 cm., adsons fine forceps., dissecting plain forceps 18 cm., dissecting tooth forceps 15 cm., langenbeck retractor large., langenbeck retractor medium., langenbeck retractor small., cheek retractor langenbeck-40x10, 215mm., surgical aspirator 19cm set of three different tip diameter size., surgical cassette., schluger bone file., oral surgical instruments, kit of 10., bone curettes lucas type., bone rongeurs end cutting., sponge holder and dressing forceps- with rachet., wire twister., arch wire cutter., bone files double ended.., adson toothed-big., adson toothed-small., adson plain-big., adson plain-small., needle holder, mayo-hegar 6 inch., suture cutting scissors, goldman fox-straight., suture cutting scissors, goldman fox-curve., periosteal elevators howarths., periosteal elevators, molt no.9., scalpel handle-bard parker style with metric ruler,no 4., scalpel handle-bard parker style with metric ruler, no 03., curved artery forceps-spencer wells type, size 8 inch ., elevators sets, set of 12., extraction forcep-pedo-set of 7., extraction forcep adult set of 14., micro miller bone file straight., oral surgical impaction kit set of 20, k9/2., disposable punch biopsy., tooth tissue forceps., tissue cutting scissors., suture cutting scissors., stainless steel bowl 4 inch., cheatle jar stainless steel., stainless steel tray-approx 13 inches x 11 inches., stainless steel tray with lid, approx 8.5 inches x 3 inches., stainless steel tray-approx8.5 inches x 6 inches., dressing drums, 6x6 inches., dressing drums-12x10 inches., dressing drums-9x9 inches., bur box metal with flap lid., plastic filling instrument with ball burnisher., agate spatulas, pack of 2., cellophane strips., ball burnisher full set., spoon excavator, no 11 or 12., restoration instrument set., glass slab, size 7.5cmx15cmx12cm., tofflemire matrix band., tofflemire retainer., hard wire cutter., cotton holder and receiver., kidney tray, mediumsize-10 inch., single ended straight probe., pmt set instrument kit., mouth mirror handle., mouth mirror tops no 5, plain, pack of 12., piezo-electric ultrasonic tips dte and satelec type, pack of 4., high-precision diamond fg bur no 165 pack of 5., high-precision diamond fg bur no 164 pack of 5., patient drape-for dental use., etchant-2gm syringe., light cured resin based flowable composite-2gm syringe., surgical burs for straight handpiece -tungsten carbide, 702 no.., petroleum jelly-100ml., protective eyewear., plastic instrument tray., composite polishing discs., stainless steel wire, soft, 26 gauge, 10gm spool., erich arch bar 1 ft length., disposable saliva ejectors-pack of 100., lubrication spray for dental handpieces and turbines, 500 ml spray bottles with spray nozzles., dental tooth polishing brush., rubber cups., prophy paste, 100 gm., pumice powder, 500gm., pit and fissure sealants., glass dappen dish for dentel use., composite fin

Sheet Pile Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors