Latest sheet piles Tenders | Government sheet piles Tenders

Central Government/Public Sector

CTN :40577013

30 Jun, 2025 NA

Kanakapura - Karnataka

Tender For supply of ss conduit 20(od) x 1.25(t) mm and l=6000mm., as per drawing: aisi-304. for con struction, mechanical properties & testing refer is: 9537 part 1&2, packing instruction: as per standard packing. it should be ensured that item should not rub during transport ation. the item should be packed with adequate strength. transit damage , if any , shall be at the cost of supplier. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40575230

10 Jun, 2025 NA

Mumbai - Maharashtra

Tender For supply of one set of ss tubes and double ferrule for brake piping arrangement of lhb bogies consistin g of 1. bulk head elbow (with conical seating) 3/4-inch od x m26 x 1.5(m) to drg. no. icf/std-3- 5-113 item -1, alt -c, qty.3 nos 2. bulk head elbow 3/4-inch od to drg. no. icf/std-3-5-117 item-1, alt- b qty-1nos 3. male elbow (with conical seating) 1/2-inch bspt(m) x m26 x 1.5(m) to drg. no. icf/std-3-5-115 item-1, alt- nil, qty-4nos 4. special adapter 1/2-inch bsp (m) x 1/2-inch bsp(f) to drg. no. icf/std- 3-5-116 item-1, alt-b qty- 4 nos 5. male branch tee union (with conical seating) 3/4-inch od x m26 x 1.5(m) to drg. no. icf/ std-3-5-132 item-1, alt-nil, qty-1nos 6. bulk head swivel union 3/4-inch od to drg. no. icf/std-3-5-133 ite m-1, alt-nil. qty-2 nos 7. union tee 3/4-inch od to drg. no. icf/std-3-5-018 item- 2, alt-a. qty-1no. 8. bul k head male connector (with conical seating) 3/4-inch od x m26 x 1.5(m) to drg.no. lwscwac-3-5-005 ite m-1, alt-nil. qty-2 nos 9. ss seamless pipe 3/4-inch od x 6000 mm astm a269 gr. tp 304 to icf/md/spec -166 issue status-01, rev-04, qty-1 no. [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :40575274

11 Jun, 2025 NA

Bhubaneswar - Odisha

Tender For supply of set of security plates for fiat bogie consisting of 03 items as follows: to drawing / spec ification item no.1. security plate for control arm, to drg. no. 1356259, ver-05. qty/set=16 nos. item no.2. security plate for anti-roll bar, to drg. no. lw05114 alt-nil , qty/set=08 nos. item no.3. securit y plate for traction centre, to drg. no. 1268843, ver-00. qty/set=02 nos., mat. & spec. ss-304 / x5 cr ni 18-10. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40538150

16 Jun, 2025 NA

Mughalsarai - Uttar Pradesh

Tender For supply of circuit breaker battery charger input. drg. no /spec.- (a) power circuit breaker-qx3-ah 8569-20a, abb id no.-hbtb585552 r3043. (b) aux. contact- qhk ss, abb id no. hbtb585557 r1200. rating-20a- 690v ac-3 poling. clw spec. no. clw/es/3/0037/h with latest alteration & clw/es/3/009 6/l with latest alteration. (schneider electric item type ref. a) ng125h3p2oac-18725 (b) 19071) [ w arranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40538284

23 Jun, 2025 NA

Pune - Maharashtra

Tender For supply of hex head screw-m16x200x44 thd (rolled thread)(zinc plated) is 1364, propertycla ss 10.9, is 1367 part-iii, is 1367 part -ii grade a, is 1367 part-17. clw specn no. clw/ms/3/201 alt- 2 & clw specn no. clw/ms/3/49 alt 4 clause no. 11 makes are (a) unbrako (precision fasteners), (b) g. k.w. , (c) laxmi precision, (d) sundram fastners (tvs) & item no. 45 of clw drg. no.1209.01.111.004 alt-4. [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :40229391

09 Jun, 2025 7.25 Lacs

Leh Ladakh - Jammu And Kashmir

Tender For corrigendum : supply of spares of primary cooling pumps for power house - pump shaft, ss 316, item no. 049 , bearing housing, cl, item no. 008 , key for coupling, item no. 054 , water deflector, item no. 729 , coupling set with spacer and rubber glands (including pins, bushes and washers) , shaft sleeve, ss410 , circlip for bearing , logging ring, gfn item no.044 , lip seal rubber item no.584

State Government

CTN :40534123

05 Jun, 2025 NA

Udhamsign Nagar - Uttarakhand

Tender For supply of c.i./c.s. casted item - c.i. casted items on new basis, c.i. idler for cane carrier (i) as per drawing no. ksc/cc1/4/17, c.i. pulley (as per drawing) with machining, c.i. coupling different size (as per drawing), c.i. casting various size (gulla) as per drawing with rough machining. different size, c.i. casted items (on conversion basis), c.i. idler for cane carrier (i) as per drawing no. ksc/cc1/4/17, c.i. pulley (as per drawing) with machining, c.i. coupling difrent size (as per drawing), c.i. casting various size (gulla) as per drawing with rough machining. different size, cast steel spur gear & pinion new basis, cast steel & spur gear- 72 teethface width- 75mm, bore- 50mm od- 473 mm, module- 6.4. approx weight 90 kg, cast steel & spur gear- 26 teethface width- 75mm, bore- 45mm od- 178.24 mm, module- 6.4- approx weight 11.6 kg, cast steel pinion- 24 teethface width- 70mm, bore- 45mm od- 166.4 mm, module- 6.4 -approx weight 9.7 kg, cast steel pinion- 34 teethface width- 75mm, bore- 40mm od- 308 mm, module- 8.56. approx weight 20 kg, cast steel gear pinion- 50 teeth as per drg no. mills-138approx weight 11 kg, cast steel sprocket- 13 teeth 6 pitchas per drg. mills-27, cast steel pinion- 18 teethface width- 75mm, bore- 45mm od- 128 mm, module- 6.4.approx weight 5 kg, c.s.scaper for mills duly machined as per sample drg.no ksc/mh/91618 approx wt-190kg each, cast steel trash plate (lenth 1680 mm) made of is 2708 grade iii duly rough machined as per drg.no ksc/mh/285/22, c.s. wheel for cane unloader bridge as per drg.no. ksc/unloader/2/17.approx wt 185 kg., c.s gear 68 teeth, module-6.14face width-65mm, o.d--430mmdrg no.-ksc/unloder/17, c.s.wheel for cane unloder trolly drg no.-ksc/cr/145 approx.wight-55kg, c.s.pinion-18teeth, module-6.14, f.w-65 od-122.8 drg. no.-ksc/unloder/17, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1565 (tail end) material 2708, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1564 (driving shaft) material 2708, c.s.sproket-36 teeth for duplex chain 2 1/2" pitch material 2708 drg no ksc/boiler-163, c.s. sprocket 17 teeth for duplex chain 2 1/2" pitch material 2708 drg no-ksc/mill/4887, opertuinity device of trash turner beam material-ss drg no. mills-8488, c.s. pinion duly hardent tempered and grinded- 24 teeth, module-10, fw-110mm od-260mm bore-50mm, c.s. pinion duly hardent tempered and grinded- 24 teeth, module-8, fw-120mm od-208 mm bore-50mm, c.s.worm shaft ( as per sample) for mill, c.s. mill coupling (weight 700kg approx) as per drawing, c.s. mill crown pinion 16 teeth (weight 1500 kg.) as per drawing, cast steel spur gear & pinion on conversion basis, cast steel & spur gear- 72 teethface width- 75mm, bore- 50mm od- 473 mm, module- 6.4. approx weight 90 kg, cast steel & spur gear- 26 teethface width- 75mm, bore- 45mm od- 178.24 mm, module- 6.4- approx weight 11.6 kg, cast steel pinion- 24 teethface width- 70mm, bore- 45mm od- 166.4 mm, module- 6.4 -approx weight 9.7 kg, cast steel pinion- 34 teethface width- 75mm, bore- 40mm od- 308 mm, module- 8.56. approx weight 20 kg, cast steel gear pinion- 50 teeth as per drg no. mills-138approx weight 11 kg, cast steel sprocket- 13 teeth 6 pitchas per drg. mills-27, cast steel pinion- 18 teethface width- 75mm, bore- 45mm od- 128 mm, module- 6.4.approx weight 5 kg, c.s.scaper for mills duly machined as per sample drg.no ksc/mh/91618 approx wt-190kg each, cast steel trash plate (lenth 1680 mm) made of is 2708 grade iii duly rough machined as per drg.no ksc/mh/285/22, c.s. wheel for cane unloader bridge as per drg.no. ksc/unloader/2/17.approx wt 185 kg., c.s gear 68 teeth, module-6.14face width-65mm, o.d--430mmdrg no.-ksc/unloder/17, c.s.wheel for cane unloder trolly drg no.-ksc/cr/145 approx.wight-55kg, c.s.pinion-18teeth, module-6.14, f.w-65 od-122.8 drg. no.-ksc/unloder/17, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1565 (tail end) material 2708, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1564 (driving shaft) material 2708, c

CTN :40540256

20 Jun, 2025 NA

Mumbai - Maharashtra

Tender For supply of cs ss fittings - item no.1 material code_12015227 , item no.2 material code_12015231 , item no.3 material code_12015233 , item no.4 material code_12015250 , item no.5 material code_18635787 , item no.6 material code_18635791 , item no.7 material code_18635794 , item no.8 material code_18635788 , item no.9 material code_18637145 , item no.10 material code_18637146 , item no.11 material code_18637147 , item no.12 material code_18637131 , item no.13 material code_18648278 , item no.14 material code_18648279 , item no.15 material code_18648280 , item no.16 material code_18637552 , item no.17 material code_12015169 , item no.18 material code_12015157 , item no.19 material code_12015158 , item no.20 material code_12015159 , item no.21 material code_12015160 , item no.22 material code_12015161 , item no.23 material code_12015162 , item no.24 material code_12015164 , item no.25 material code_18648270 , item no.26 material code_18648225 , item no.27 material code_18648277 , item no.28 material code_18637148 , item no.29 material code_18637149 , item no.30 material code_18637603 , item no.31 material code_12015193 , item no.32 material code_12015194 , item no.33 material code_12015182

Central Government/Public Sector

CTN :40529951

28 Jun, 2025 NA

Jalpaiguri - West Bengal

Tender For supply of ss hex head screw size 12x60 mm with nyloc nut & plain washer. drawing : drg no lp 63138 _alt c , item no. 4, 5 & 6 or drg no cc63136 _alt f , item no. 4, 5 & 6. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40539594

16 Jun, 2025 NA

Delhi - Delhi

Tender For supply of utensil set ( induction base tawa-01 dia-27.5 cm, induction base sauce pan-01 cap.-02 ltr., induction b ase fry pan-1 dia-24 cm, induction base karahi-01 cap-05 ltr., induction base degchi (patila) ss with cover-04 cap-3lt r,4ltr.,5ltr,6ltr.).make-all-clad, milton, hawkins, cello, vinod or similar reputed make.tenderer's are required to indica te the make, model, design, and color for the subject item. an item catalogue must be attached to your offer, failing which the offer may be ignored. [ warranty period: 30 months after the date of delivery ]

Sheet Piles Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors