Latest sheet steel Tenders | Government sheet steel Tenders

State Government

CTN :45355904

09 Jun, 2026 NA

Kozhikode - Kerala

Tender For providing gi sheet roofing at srs vadakara

corporations/Associations/Others

CTN :45348402

19 Jun, 2026 20.85 Lacs

Amreli - Gujarat

Tender For work of providing and fixing of all-weather proof cold rolled sheet steel junction box for cvt,pt and ct termination boxes for various line and transformer bay equipments of various 220 kv & 66 kv sub-station of am division vartej under circle office amreli

corporations/Associations/Others

CTN :45346453

09 Jun, 2026 29.95 Lacs

Coimbatore - Tamil Nadu

Tender For improvement works and supplying of kitchen accessories to the amma unavagam at poo market , mettupalayam road in ward no.72 of west zone. - earth work excavation of building in kind of soilsand sup soilsand full depth as may be directed by the departmental officers with initial lift and leads and cleaning and leveling the site., cement concrete 1:4:8(one cement,four sand and eight aggregate) using 40mm gauge hand broken granite stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15cm thick and compacted, supplying and erection shuttering,including necessary supports for plain in all floors using mild steel sheets of size 90x 60 cms and bg 10 stiffed with surfacewelded mild steel angles for boarding supported by casuarina props at suitable intervals etc. completecomplying with standard specifications as directed, for plinth beam, for lintel beam slab, for vertical walls, cement concrete 1:1.5:3 (one cement,one and half sand and three aggregate)using 20mm gauge hard broken granite stone jelly for all rcc items of work excluding centring, shutteringand cost of reinforcement grill but including fixing fan clamps and fixtures in rcc works wherever necessary as per the direction of departmental officers complete, cement concrete 1:2:4 (one cement, two sand and four aggregate ) using 20mm hard broken granite stone jelly for all pcc items of work etc., complete fixturas directed by departmental officer ., supplying,fixing and placing in position mild steel /ribbed torsteel rods for all rcc works including cost of steel and binding wire also in all floors,complete complying with standard specifications(upto 16mmdia rods), fly ash brick work in cm 1:4 (one cement & four sand) using size 9"x4 3/8"x2 3/4" including finishing,curing,etc., complete complyingwith standard specification., plastering with cement mortar 1:3 (one cement and three sand) 12mm thick in all floors including cost and conveyance of all materials to site etc,complete as per standard specifications, plastering with cement mortar 1:5 (one cement and five sand) 12mm thick in all floors including cost and conveyance of all materials to site etc,complete as per standard specifications, finishing the floor with 20mm cement concrete ( ellis pattern rst sort - no sand to be used) etc complete as directed., supplying, fabricating, erecting structural steel work for roofing welded or bolted type using ms channels, angles, plates and roundbars etc. conforming to is specification including primer coating and enamal painting as per design given by the departmental officers etc, complete as per standard specification., supplying and roofing with pplg sheet of selected colour fixed to required profile inclusive of brackets and screw arrangements etc.,complete, supplying and erecting pull and push type rolling shutter with i.s.i. make of approved size and section using 18 gauge g.i.sheet with manually operated type. the shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc, complete as per standard specification., supply of man hole cover and frame is 12592 including fixing etc. extra heavy duty circular (228kg) 600 mm dia, supplying and fixing in position cement based hydrualically pressed anti skid tiles (pattern design) 20mm thick in cement mortar 1:3 (one part of cement and three part of plastering sand (p-sand)), 20mm thick and pointed with same colour of cement etc., complete as per standard specification, dadooing the walls with first quality approved coloured glazed tiles of size 150x150x6mm laid in cement motar 1:2 mix to 10mm thick and pointing with white cement using 0.40kg per sqm including finiching the joints and surface etc., complete, flooring finishing with first quality ceramic tiles of all colours of size 305cm x 305cm x 6mm laid in cement motar1:3 mix to 20mm thick and painting with cement paint using 0.3kg 1m2 including finishing the joi

State Government

CTN :45324844

06 Jun, 2026 2.15 Lacs

Varkala - Kerala

Tender For state plan 2024 25 cwss to varkala and adjoining villages providing and fixing sheet roofing in the puzhakkadavu pumphouse

State Government

CTN :45333107

16 Jun, 2026 NA

Diglipur - Andaman And Nicobar Islands

Tender For supply of emulsion paint , synthetic enamel paint weather resistant , aluminium sliding door bolt , aluminium tower bolt , aluminium door handle , mild steel pressed butt hinges , ceramic glazed floor tiles anti skid matt finish , float glass clear plain sheet 5 mm thick , ms casement stay straight peg type , european type water closet wc pan p trap , wash basin glossy finish , water storage tanktriple layer , cement fibre board , paint brush , ppgi roofing sheet 0.50 mm thick , paint thinner , pvc door frame frame thickness 5 mm waterproof , solid pvc door shutter thickness 35 mm waterproof , ordinary portland cement , natural river sand , pulverised stone sand dust , crushed stone aggregate , cement concrete hollow block ) /bid number : gem/2026/b/7585996 * /dated: 26-05-2026 & & / bid document 1 / 22

State Government

CTN :45333140

16 Jun, 2026 NA

Diglipur - Andaman And Nicobar Islands

Tender For supply of emulsion paint , synthetic enamel weather resistant , ceramic glazed floor tiles vitrified anti skid matt finish , glass clear plain sheet 5 mm thick , ms casement stay straight peg type , european type water closet wc pan p trap , wash basin , water storage tank triple layer , cement fibre board , paint brush , ppgi roofing sheet 0.50 mm thick , plain aluminium ridge sheet , gi angle length 6 mtr , gi flat standard length 6 meter , paint thinner , pvc door frame frame thickness 5 mm waterproof , solid pvc door shutter thickness 35 mm waterproof ) /bid number : gem/2026/b/7583120 * /dated: 26-05-2026 & & / bid document 1 / 19

State Government

CTN :45327429

30 May, 2026 2.98 Lacs

Jodhpur - Rajasthan

Tender For providing and fixing of various electrical accessories at district and session court metro jodhpur - sitc of ip20 smd mid power led batten type integrated light fixture made from powder coated extruded aluminium housing with in built driver , system lumen efficacy 110 lm/watt output only at cw (5700k to 6500k) , internal surge protection of 4.0 kv with short & open circuit protection ,thd 10% , p. f. 0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000 k / 4000 k / 5700 k /6000 k/6500 k (as per ansi bin) as required., 1170mm(+/-10%) led batten with min. lumen output 2200 lm, sitc of ip-20 led recessed / surface mounted, round / square backlit & smd mid power led downlight with power coated die-cast aluminum housing with uv stabilized non yellowish diffuser with bis compliance 4.0 kv surge protected isolated driver, with short & open circuit protection input 320vac-48 hr protection, input 350vac-2 hr protection), having efficiency > 85% . system lumen efficacy of 110 lm / watt,at cw (5700k to 6500k) , thd 10 % , pf. 0.95, cri >80, life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000 k / 4000 k/ 5700 k /6000 k/6500 k (as per ansi bin) as required., recessed mounting, minimum lumen output 1950 lm, sitc of ip20, 2x2 led surface/ recessed mounting backlit & smd mid power type led light fixture not less than 35 mm housing depth made from crca sheet steel housing, high purity / transmissivity uv stabilized non -yellowish diffuser for uniform light distribution. operating voltage range 140-285 v, hv cutoff - lv cutoff should be 300-100v . high efficiency with 4 kv internal surge protection bis certified isolated driver having efficiency > 85% , with short & open circuit protection ( input 320vac-48 hoursprotection,input 350vac-2 hours protection) (integral with light fixture). system lumen efficacy of 120 lm/watt ,thd 10 % , p.f. 0.95,cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000 k / 4000 k / 5700 k /6000 k/6500 k (as per ansi bin) as required., recessed mounting, minimum lumen output 4320 lm, providing & fixing of bee star rated copper wounded with class of insulation f, double ball bearing capacitor start, aluminium body & aluminium blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 with down rod up to 30 cm with secondary support safety cable ( steel rope) , cotter pin, shackle kit with 3 x 1.5 sq.mm pvc insulated flexible copper conductor and making connection testing etc. as required., 1200 mm sweep bee 1 star rated (service value >=4.0 to 4.5 ), providing & fixing of ventilating fans capacitor start, copper wounded, single phase with pvc impeller, abs body, automatic openable louver shutter in existing opening including making connection, testing etc. as required., 200 mm sweep minimum air delivery 450 cum / hour, providing & fixing of 450 mm sweep oscillating type wall mounting / pedestal type fans with three speed, on and off position, sintered iron bush oil impregnated, with metal front and back 120 or more ribs guard; three no. aluminium blades, minimum air delivery 100 cum. / minute , minimum service value 1.11 cum./min/watt, noise level should be = 75 db, power consumption = 120 watts, motor protection through thermal overload protection device, including fixing with anchor bolts, making connection testing etc. as required., wall mounting type with adjustable vertical angle, supplying and laying fr pvc insulated & unsheathed flexible copper conductor of following nominal sizes with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from copper, stranding in acc. to is:8130/iec 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation pvc type a/c/d , flame retardant as per is 10810-53, better amperage rat

State Government

CTN :45330067

01 Jun, 2026 1.04 Lacs

Rangat - Andaman And Nicobar Islands

Tender For annual repair and maintenance of non residential building under sd-iv, kadamtala of cd-i, apwd, rangat. sw-procurement of ms pipe and roofing sheet - re-call.

State Government

CTN :45327248

04 Jun, 2026 8.43 Lacs

Kasaragod - Kerala

Tender For -providing roofing sheet and maintenance work of staff quarters building( c 6 ) - e k n m p o l y t e c h n i c construction of l l e g e trikkarippur- eknm polytechnic college trikkarippur -general civil work

State Government

CTN :45321989

05 Jun, 2026 8.71 Lacs

Faridabad - Haryana

Tender For replacement of old damaged ac sheets with 0.6mm thick galvalume sheet in roofing of godown no.1 at swh badoli, district palwal. (recall)

Sheet Steel Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors