Latest shoe bit Tenders | Government shoe bit Tenders

Central Government/Public Sector

CTN :42920932

16 Dec, 2025 NA

Multi City - Rajasthan

Tender For auction sale of metallic, non-metallic, others - 1. ferrous items consisting of drill rod, barrel, casing, tripod, etc. -22000 kg 2. m.s./c.s. items (machine parts, drilling parts, tool scrap, ms tanks, ms stand, angles, channels, racks, trolleys, tent, accessories, etc. and steel wire ropes -15500 kg 3. ms drums ( 1,250 kg. ) -1 lot of 75 nos. 4. gi sheets, gi scrap consisting of gi sheets, gi core boxes, gi pipes, gi fittings, etc. - 11250 kg 5. diamond tools consisting of diamond impregnated core bit, diamond reaming shell, casing shoe, casing shoe bit, surface core bit, etc. - 1900 kg 6. unserviceable equipments consisting of brunton compass, dumpy level, telescopic alidade, paper shredder, theodolite, distomat etc. - 1 lot of 42 nos.

State Government

CTN :42813292

05 Dec, 2025 NA

Multi City - Telangana

Tender For corrigendum : tggenco-ytps(5x800mw)-supply of t and p items required for stage-i and chp of ytps. - ac/dc volts (40hz to 500hz):4.000v, 40.00v, 400.0v, 1000v; resistance (ohms): 400.0 ohm, 4.000 kohm, 40.00 kohm, 400.0 kohm, 4.000 mohm, 40.00 mohm; capacitance: 40.00nf, 400.0nf, 4.000 µf, 40.00 µf, 400.0 µf, 1000 µf; ac/dc current: 4.000a, 10.00aac/dc millivolts: 400.0mv; diodetest: 2.000v;ip rating: ip40safety: iec 61010-1, iec 61010-2-030 cat iii 600v, cat ii 1000v, pollution degree 2.temperature: 50-400°c, 0-50°c, -55 to 0°c.temperature: operating: 0°c to 40°c;storage: -30°c to 60°celectromagnetic environment: iec 61326-1:portableincluded accessories: test leads with caps, thermocouple, temperature probe, 2 aa batteries, user manual along with the required calibration certificates.gds 18v-400 cordless impact wrench;battery voltage: 18v; torque max: 400nm; no load speed: 0-3,400 rpm. make: boschfluke true rms ac/dc digital clamp meter with iflex probe and fluke connect modelno: 376digital multimeter, make: fluke, model: 17b+, specifications: ac/dc current 10 amps, ac/dc voltage 1000 voltsmegger, 1kvleakage current clampmeter ac, range (0-100a)portable hot air blowervacuum cleaner, dry, 1300w, 6.1kg, 230v, 50hzvibration meter, digital, model: ird 306analog phase sequence indicator, 100 to 500 v, 25 to 65 hzdigital earth resistance tester with resistivity test facility, earth resistance: 0.01 ohms-200 kohmsplier, nose, 6"/150 mmhammer, 4 lbcutting plier, 12"39 , gds 18v-400 cordless impact wrench; battery voltage: 18v; maximum torque: 400 nm; no load speed: 0-3,400 rpm. make: bosch. , fluke true rms ac/dc digital clamp meter with iflex probe and fluke connect, model no: 376, , digital multimeter, make: fluke, model: 17b+, specifications: ac/dc current 10 amps, ac/dc voltage 1000 volts, , megger, 1kv, , leakage current clamp meter ac, range (0-100a), , blower, portable hot air, , vacuum cleaner, dry, 1300w, 6.1kg, 230v, 50hz, , vibration meter, digital, model: ird 306, , analog phase sequence indicator, 100 to 500 v, 25 to 65 hz, , digital earth resistance tester with resistivity test facility, earth resistance: 0.01 ohms–200 kohms, , plier, nose, 6"/150 mm, , hammer, 4 lb, , cutting plier, 12", , tape, measuring; length: 3 m; material: steel, , tape, 5 meters measuring tape, , tape, 30 meters measuring tape, , hole punch set 22, 20, 18, 16, 14, 12, 10, 8, 6, 4 set of 10 nos (tiger make), , center punch, length: 125 mm, , drilling machine, rated power input: 800w, 240v, drilling diameter in concrete with hammer drill bits: 4-26 mm, , digital motor checker: emc-38, , transformer, auto; type: manual operated variable; input voltage: 240 vac; output voltage range: 0-270 v ac; special features: (dimmerstat) with continuously variable banana terminals, capacity: 20 amps; model: 20d-1p, , transformer, auto; type: manual operated variable; input voltage: 415 v ac; output voltage range: 0-470 v ac; phase: 3; special features: 50 hz; model: 15d-3p, , lux meter, digital, 0-50,000 lux with silicon photodiode sensor, lcd display, dc 9v battery, mandatory accessories, , tachometer, digital; speed range: 9999/99999 rpm; model: v, , digital micro ohm meter, model dmo-100d, , gun, laser, , specifications:, , laser convergence distance: 50" (127cm) ir range: -58 to 3992°f (-50 to 2200°c) emissivity: 0.10 to 1.00 adjustable, , max resolution: 0.1°f/°c, , field of view (distance to target): 50:1

CTN :42970123

19 Dec, 2025 6.49 Lacs

Visakhapatnam - Andhra Pradesh

Tender For supply of supply and laying of 4c 50 sqmm copper armoured power cable from transformer to powerhouse at dnlh d d - supplying of the 4core x 50sqmm one length copper armored pvc insulated pvc sheathed xlpe power cable from transformer to power house , supplying of the 200a 3 pole 25 ka molded case circuit breakers mccb , laying and fixing pvc insulated and pvc sheathed xlpe power cable of 1. 1 kv grade on wall surface as required , supplying and making end termination with brass compression gland of cable , supplying and filling in plinth with sand under floors including watering ramming consolidating and dressing complete with all labour materials transport in hilly area , laying one number pvc insulated and pvc sheathed xlpe copper armoured 1. 1 kv cable in existing cement trench removing sand cushioning placing new cable properly with all labour tools , installation of 200a 3 pole mccb on existing db including dismantling old mccb making connections with suitable lugs and cables tightening terminals testing and commissioning as required. , supplying and fixing 400 400 15 mm seasoned wooden board for mounting 200a porcelain kit kat fuse at the powerhouse including cutting drilling anchor fasteners holes. , supplying and installing 200a porcelain kitkat fuse on pre fixed wooden board, including incoming outgoing cable connections with copper lugs , supplying and fixing 200a neutral link suitable for terminating multiple neutral cables in lt distribution system mounted on pre fixed wooden board , removing outer sheath of 4c 50 sqmm copper armoured xlpe cable up to 2 m and terminating each core at energy meter using heat shrink sleeves including supply laying , providing laying and fixing 75 mm dia medium class gi pipe in rcc road with gi fittings including 75 mm trenching refilling with rcc materials and using all necessary machinery tools etc. , cable jointing of existing 4c 50 sqmm xlpe copper armoured cable using approved heat shrink kit including stripping cleaning crimping with copper lugs heat-shrink sleeves sealing insulation materials , supplying and fixing 6 mm multiwall polycarbonate sheet as shed roofing over energy meter enclosure 1 m length plus 1 m projection with gi supports cutting fixing with screws edge channels , making 4 inch hole in lighthouse entrance gate wall 600 mm thick for cable entry using necessary heavy machinery and tools and refilling as required , add extra charges for executing electrical work at dolphin nose lighthouse in hill area considering difficult terrain limited access higher labor effort and transportation challenges , miscellaneous items including ss screws anchor fasteners nuts and bolts as required gi clamps for cable fixing copper lugs and other necessary materials.

Central Government And Public Sector

CTN :42932856

16 Dec, 2025 NA

Raipur - Chhattisgarh

Tender For supply and installation pcb lab equipment pcb drilling machine - dc motor based , pcb drill machine - ac motor belt pulley , pcb curring unit , pcb uv exposure unit , pcb etching unit , pcb dip coating machine , pcb holder , magnifier lamp , pcb shearing machine , through hole (pth) platting line system , smoke absorber , smd tester , smd tweezer , lcr-q meter , universal programmer , transformer winding machine set up , consumables for trasformer winding (e,i, core, bobbin, ferrite core, insulation paper, cutter) , portable hot tweezer mini soldering station , smd component welding practice board soldering kit resitor diode transistor & stencil set- 10 set , ultrasonic cleaner , pcb chemicals & consumables , one time training cost

State Government

CTN :42180388

04 Dec, 2025 4.45 Lacs

Jummu - Jammu And Kashmir

Tender For corrigendum : deep drilling of 125 mm dia bore hole by using odex method including providing, installation, testing, commissioning of mark–ii hand pump and construction of platforms at near sumo stand thathri in district doda on turnkey basis (epc) under district capex 2025-26 (ulb grant)

State Government

CTN :42531820

04 Dec, 2025 2.43 Lacs

Jummu - Jammu And Kashmir

Tender For corrigendum : deep drilling of 125 mm dia bore hole by using odex method including providing, installation, testing, commissioning of mark–ii hand pumps and construction of platform at near raghunath temple opp. moon light cineplex kathua in district kathua on turnkey basis (epc) under cds (2025-26)

State Government

CTN :42552990

04 Dec, 2025 5.20 Lacs

Jummu - Jammu And Kashmir

Tender For corrigendum : deep drilling of 125 mm dia bore hole by using odex method including providing, installation, testing, commissioning of mark–ii hand pump alongwith submersible pump set at w. no. 3 upper kallar kattal nho nazir mohd district poonch on turnkey basis (epc) under district capex budget (2025-26)

State Government

CTN :42610429

05 Dec, 2025 4.70 Crore

Ernakulam - Kerala

Tender For supply of tools and electronics for creative corner project to 300 addresses as per the given addresses in annexure 2 on the tender form. - hand tools & accessories, ball peen hammer - (220gm), claw hammer - (220gm), sledge hammer, rubber mallet hammer, two in one screwdriver (8 inch), two in one screwdriver (10 inch), screwdriver 4"(+), screwdriver 4"(-), screwdriver 3"(+), screwdriver 3"(-), wood/block planer, line tester (7.5 inch), digital voltage induction tester, combination plier 8 inch, nose plier 6 inch, side cutting plier 6 inch, hacksaw mini, hacksaw large, junior hacksaw, adjustable spanner (thread type), spanner set - double-ended, spanner set - ring, f-clamps, g-clamp, wire stripper-plier, automatic wire stripper(2 in 1), hand saw 12 inch, hacksaw blade 12 inch, try square 6 inch, combination square, chisel flat inch, chisel flat 1 inch, wood carving chisel set, nails 1 inch, nails inch, drywall screw inch, drywall screw 1 inch, drywall screw 1 inch, self drilling steel screw 1inch, pipe cutter, spirit level - 3 vials, precision screwdriver set, silicon sealant gun, silicon sealant, pipe wrench, wire gauge, electrical & plumbing accessories, pvc reducer bush (1 x ), pvc elbow 90 (1 inch), pvc tee 1 inch, pvc tee inch, pvc elbow 90 ( inch), pvc mta ( inch), pvc fta ( inch), pvc threaded end plug ( inch), pvc end cap plain, 20 mm, 3/4" inch, pvc elbow 45 ( inch), pvc pipe 1 inch, pvc pipe inch, pvc solvent, teflon tape, pvc ball valve 1 inch, metal u clamp for pvc pipe 1 inch, metal u clamp for pvc pipe inch, pvc water tap inch, extension cords, 1-way switch, 2-way switch, 5 pin electrical socket, 3 pin plug, 3 core cable, 6 way modular gang box with top plate and cover, pvc insulated single core wire (1.5mm ), 8-way db box, pvc electrical conduit pipe, flexible electrical wiring pipes, saddle clip, batten holder, pendant bulb holder with wire and plug, pvc enclosure box (4x4x2), junction box 2-way, junction box 3-way, junction box 4-way, electrical elbow inch, screw inch, screw inch, screw 1 inch, wall plug packet 6mm, wall plug packet 8mm, electrical insulation tape, rccb, mcb, isolator, power tools and accessories, portable drilling machine (corded), drill machine stand, drill bit set, carbon steel hole saw set for wood(11-piece ), wireless drill, mini rotary grinding tool with accessories kit, heat gun, electric paint spray gun, gardening tools, budding & grafting knife, garden hose with connector and multi pattern spray gun, water level hose, secateur, pneumatic hand sprayer, hand sprayer, bucket large (rubber), bucket small (rubber), net pots, rubber coated gloves, wheel barrow, garden rake, rose can, garden shear, hand cultivator, hand fork, hand trowel/ transplanter, grow bag, budding and grafting tape, pick axe with handle, shovel, garden hoe (spade), small garden hoe (small spade), 3 in 1 soil meter for moisture, light intensity and ph testing, digital ph meter, drip irrigation set, programmable timer switch, mini submersible water pump, high-output electromagnetic air compressor, flexible transparent pvc tubing, safety items, fire extinguisher - 2 kg, safety helmet ratchet with spring face shield, nitrile gloves, first aid kit, safety goggles, safety mask, stationary, ruler-stainless steel 6 inch, ruler-stainless steel 12 inch, ruler-stainless steel 18 inch, ruler-stainless steel 1 meter, paper cutter knife - big, paper cutter knife - small, paper cutter blade - big, paper cutter blade - small, scissors (small), scissors (medium), measuring tape (5 meter), sand paper, hot glue gun, hot glue stick, instant adhesive, craft glue, woodworking adhesive, rotary cutter, rotary cutter blade, electronic and electrical materials:, digital multimeter, punching machine for led bulb, led bulb tikki machine, soldering iron 25 w, desoldering pump, 9w led kit (philips type), soldering lead-50g, heat sink compound-250g, toy screws pack, solder and desolder flux, soldering iron holder/stand with sponge, 9v rec

State Government

CTN :42624203

04 Dec, 2025 4.97 Lacs

Jummu - Jammu And Kashmir

Tender For corrigendum : deep drilling of 125 mm dia bore hole by using odex method including providing, installation, testing, commissioning of mark–ii hand pump and construction of platforms at khawas in district rajouri on turnkey basis (epc) under district capex budget (2025-26)

CTN :42868105

22 Dec, 2025 NA

Parganas - West Bengal

Tender For tender for supply of 129 types of different gauges c c - gap limit gauge for checking operational , slip gauge for checking distance , t type profile gauge for checking platform , combination gauge for checking thickness , slip gauge for checking wall thickness , slip gauge for checking wall thickness , gap limit gauge 4point05he , gap limit gauge 4point2he , gap limit gauge 4point75he , gap limit gauge for rear trunnion , plug gauge 4point12he for front trunnion , plug gauge 4point16he , plug gauge for checking hole diameter , plug gauge for checking hole diameter , plug gauge for checking drilling hole , plug gauge for checking reaming hole diameter , plug gauge for checking hole for block , plug gauge for checking , plug gauge for checking hole for block setting , plug gauge for receiver , plug gauge for checking rectification , plug gauge for checking rectification , plug gauge for checking rectification work , plug gauge for checking hole for block , plug gauge for checking hole for block setting , plug gauge for checking hole for block , plug gauge for receiver assy , plug gauge for final checking , plug gauge for checking reaming hole , plug gauge for final checking of receiver , plug gauge for final checking hole , plug gauge for bridge hole checking , plug gauge for final checking of receiver , plug gauge for final checking of receiver , combination plug gauge for final checking , combination plug gauge for final checking , combination plug gauge for final , combination plug gauge for final , combination plug gauge for final checking , combination plug gauge for final , combination plug gauge for final , combination plug gauge for final checking , plug gauge for checking of receiver assy , plug gauge for checking of receiver , plug gauge for checking depth of bridge , t type profile gauge for no go of opening , plug gauge for receiver reaming , plug gauge for final checking , plug gauge for trigger pin of receiver , plug gauge for checking receiver hole , plug gauge for checking top , plug gauge for checking top , plug gauge for checking receiver , combination plug gauge for checking sector , gauge bush for grouping front trunnion , gauge bush for grouping front trunnion , gauge bush for grouping front trunnion , gauge bush for grouping front trunnion , gauge bush for grouping front trunnion , length gauge for checking distance , gauge bush for final checking of receiver , gauge bush for final checking of receiver , gauge bush for final checking of receiver , gauge bush for final checking of receiver , gauge bush for final checking of receiver , length gauge for checking distance from pin to guide , length gauge for checking distance from pin , length gauge for checking distance from pin , length gauge for checking distance from pin , combination plug gauge for checking radius , plug gauge for checking inner wall dimension , combination plug gauge for checking depression , t type profile gauge for no go for magazine , gauge bush for checking co axiality , gauge bush for checking co axiality , gauge bush for checking co axiality , gauge bush for checking co axiality , gauge bush for checking co axiality , t type profile gauge for checking spot , receiver gauge for rivet change rectification , gap gauge for checking recess milling , gap gauge for checking recess milling of sector , gauge rule for checking selector rotation , gauge rule for checking rear trunnion position , gauge rule for checking rear trunnion position , gauge rule for checking of rivet head height , receiver gauge for checking spot welding , slip gauge for checking of front trunnion , slip gauge for checking of guard trigger rivet , slip gauge for checking of guard trigger rivet , gap gauge for checking of sector end part , slip gauge for checking of guard trigger of receiver , slip gauge for checking of gap between rear trunnion , gauge insert for checking distance from ejector , gauge insert for checking distance from ejector tooth , gauge insert for

Shoe Bit Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors