Latest shovel loader Tenders | Government shovel loader Tenders

Central Government/Public Sector

CTN :45061677

13 May, 2026 NA

Multi City - Punjab

Tender For auction sale of depot ferrous scrap - scrap and condemned loose part of l.b. spring of different sorts & sizes of different width excluding tub. location: - lying behind machine shop near tank no 1. remarks: -(1) loading by purchaser. (2) private road crane allowed for loading purpose if required.

Central Government/Public Sector

CTN :45061678

13 May, 2026 NA

Multi City - Punjab

Tender For auction sale of depot ferrous scrap - scrap mild steel turning & boring. location: - lying and behind machine shop (near rcc tank no 1, beside toilet)asr. remarks: - (1) loading by purchaser. (2) jcb allowed for loading purpose.

Central Government/Public Sector

CTN :45054942

11 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - pl.no. 98322000. condemned and unserviceable guillotine shearing machine with motor, pulley, back gauge, blade, drive assembly, plate clamping assembly and without electrical panel. id no.314105050, u/c no.120124001.make: batliboi and co. vide udm scrap advice note no. 012282-25-01479 dt. 17.03.26. approximate total weight - 11500 kgs [mild steel-11410 kgs, cast iron -30 kgs, brass/bronze -20 kgs, copper-30 kg, wastage-10 kgs]. note: 1. rate per number should be quoted. 2. as is where is basis. 3. cutting and dismantling is permitted. 4. crane loading is permitted. 5. digging is not permitted 6.incoming cables to the motor terminal are not for sale. 6. custodian should cut the power supply during delivery if required. 7. the total weight and break up of the total weight is approximate. railway is not responsible for any shortage of weight. 8. the purchaser may visit the machine offered for condemnation and check the site conditions for delivery feasibility before quoting the offer 9. purchaser has to make his own arrangements such as tools, lifting tackles, lifting equipment, gas cutting equipment and necessary trained men. 10. the purchaser will be held responsible for any damage/fire accident caused to the railway property. 11. after completion of delivery purchaser has to keep the cutting and loading spot neat and clean. custodian: sse/mmw/goc

Central Government/Public Sector

CTN :45054908

12 May, 2026 NA

Multi City - Delhi

Tender For auction sale of depot miscellaneousellaneous scrap - cond and scrap all type of dismental machinery part comp. hydraulic elevating table portable air installation current transformer , hand rolling machine, air compressor, chord trolly, electric blower with motor, pump with motor, rectifier battery charging wasting house, pistal grip, portable electric drill, automatic fan winding machine, hand pallet, tanki, accl compressor, vacuum reservoir and other miscellaneous machinery part, different make and capacity - with motor, along with accessories with n/f attachment, broken , as is where is basis as it is. loading by purchaser

Central Government/Public Sector

CTN :45054912

12 May, 2026 NA

Multi City - Delhi

Tender For auction sale of depot miscellaneous scrap - cond. and scrap all type of signal point machine, with or without motor, sort and sizes, broken and unbroken. as is where is basis. as it is.note:- loading by purchaser

State Government

CTN :44953633

05 May, 2026 5.00 Lacs

Sonipat - Haryana

Tender For corrigendum : tender for medical equipment for dental department - details of items, rvg unit radio visio graphy, autoclave class b front loading to 23 to 25l preferred melag and fomos and w and h, portable handheld dental x ray machine

corporations/Associations/Others

CTN :45033657

20 May, 2026 35.17 Lacs

Jhansi - Uttar Pradesh

Tender For providing of m & r of 2x110 mw and 2x210 mw ash dykes at ptpp, parichha. - carriage of cmr/ash by mechanical transport including loading, unloading and stacking upto 5 km distance from power house area to ash ponds at ptpp parichha. payment to be made after deducting voids as per cpwd specfication or as decided by engineer in charge. , earth/ash work in excavation in earth over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m; disposed earth to be levelled and neatly dressed , placing of precast rcc planks in decantation well including its carrige and putting it into slott including all labour t&p etc. required for proper completion of work. , providing and laying empty cement plastic bags filling the same with ash having capacity of 50kg and stiching the same with sutali, laying with ash pond area as per instruction of engineer incharge. , engaging jcb/hydra machine on hire bases including hire fuel driver helper etc. complete. , dry stone pitching 22.5/30 cm thick including supply of stones and preparing surface filling from fly ash with watering & compection complete including carriage from coal handling area.(boulder free of cost from chd area in plant) , spreading of cmr/ash/earth by opening of stack including dressing watering compaction/ramming etc. complete for proper completion of work as per direction of engineer in charge of the work. payment to be made on compacted quantity. , clearing jungle including uprooting of rank vegetation, grass, brush wood,trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared , brick work with fly ash bricks f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in: cement mortar 1:6 (1 cement : 6 coarse sand) , cement plaster (in fine sand) 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , formation of dyke/ roads using approved materials including the preparation of borrow area,stripping, watering of borrow area, excavation of approved quality of material from borrow area,using poclains or any other mechanical means,loading, unloading, transporting by dumpers,trucks etc., surface watering / dewatering,lowering of water level to at least 0.5 m belowthe bottom of the working level, includingconstruction of cofferdams wherever required,depositing the fill material on the dyke,spreading by dozers or grader in layers notexceeding 30 cm in compacted thickness forforming the embankment with all leads, lifts,breaking clods, watering, compaction with min. 10tone capacity vibratory rollers or pneumatictyred rollers to achieve a dry density not lessthan 95% of maximum dry density (standardproctor) forming extra width on edges, trimmingof slopes and slope compaction with dozers orslope compactors to obtain the section as perconstruction drawings, with all incidental charges, cost of labour, equipment, materialsetc. complete as per specifications, drawings and as directed by the engineer. with ash available from inside ash dyke area , structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. , same as above item but steel shall be issued by department free of cost ( steel issued by department) , steel reinforcement for r.c.c. work including straightening, cutting, bendin g, placing in position and binding all complete for thermo-mechanically treated bars

Central Government/Public Sector

CTN :44975932

04 May, 2026 80.0 Thousand

Dhanbad - Jharkhand

Tender For safely loading, transporting and unloading (through suitable low-bed trailers within 2.5 km range) of idm-30 drill sl. no. 201406834 from abgc to nakc and idm-30 drill machine sl. no. 202206979 from nakc to abgc at govindpur area-iii, bccl.

CTN :45036958

26 May, 2026 NA

Lucknow - Uttar Pradesh

Tender For supplying and loading of machine crushed stone ballast into railway wagons confirming to rdso's specification irs-ge-1 (june-2016) with up to date correction slips for track ballast from private quarry to tahsil fatehpur station (burhwal-sitapur section) dump.

CTN :44676339

30 Apr, 2026 NA

Delhi - Delhi

Tender For bid to ras bid to ras corrigendum : supply of recce boat baplw and baut spares d d - drawings spec no cqae 4320 1521 2001 , 14 1940 00217 stiffener angle drg no impd 0592 a spec no ind eng prov 1092 a , 14 1940 000213 coupling deck drg no impd 0523 spec no cqae 1940 1575 a , 14 5305 009850 self tapping sheet metal screw g8 x 25 csk hd to is 7170 cadm plated or zinc plated drg no imsa 0052 a item no 11 spec no cqae 1940 1575 a , e3 4030 000092 bulldog grip 16mm dia spec no cqae 4030 1684 grips bulldog , 14 5360 002298 sealant 2000mm long drg no impd 0496 item no 11 spec no cqae 1940 1575 a , 14 5315 003916 pin lock top with chain drg no impd 0565 a and imsa 0053 a ser no 22 spec no ind eng prov 1092 a , 14 5315 003915 pin lock bottom with chain drg no impd 0566 a and imsa 0053 a ser no 26 spec no ind eng prov 1092 a , 14 5310 009180 blank rubber drg no impd 0496 item no 6 spec no cqae 1940 1575 a , 14 5320 001522 rivet alloy rd hd 4mm dia x 10mm lg drg no impd 0496 item no 8 spec no cqae 1940 1575 a , 14 5120 004320 dolly reveting for 4mm dia rivet drg no impd 0530 spec no cqae 1940 1575 a , 14 1940 000210 tube bracing drg no impd 0555 a spec no ind eng prov 1092 a , e2 3990 000045 ramp loading vehicle for boat assault universal drg no imga 0074 a sheet 1 of 3 and 2 of 3 and connected documents spec no ind eng prov 1092 a , e2 3990 000046 platform loading vehicle portable for boat assault universal drg no imsa 0055 a and connected documents spec no ind eng prov 1092 a , 14 2090 000051 panel splash centre with u brackets drg no impd 0547 and impd 0549 spec no cqae 1940 1575 a , 14 2090 000052 panel splash starboard with u brackets drg no impd 0548 and impd 0549 spec no cqae 1940 1575 a , e2 1940 000215 cover water protection canvas boat assault universaldrg no impd 0557 b spec no ind eng prov 1092 a , 14 2090 000042 hook boat 11 feet 7 1 by 2 inch 3 point 54m drg no impd 1497 spec no cqae 2090 1404 , 14 2090 000044 row lock with chain drg no impd 0542 spec no cqae 1940 1575 a , 14 5315 003912 pin deck coupling with chains and cleat drg no impd 0524 spec no cqae 1940 1575 a , 14 1940 000212 link side drg no impd 0525 spec no cqae 1940 1575 a , 14 5130 000615 auger with handle 170 mm lg drg no impd 0496 a item no 2 spec no cqae 1940 1575 a , 14 5315 000423 pin, tapper solid steel 6 dia x 30 drg no impd 0524 a item no 3 spec no cqae 1940 1575 a , 14 5305 009852 screw hardened self tapping sheet metal pan head cone end a10 x 12 point 5 mm drg no impd 0496 a item no 9 spec no cqae 1940 1575 a , e2 5315 003919 pin cotter split 4 x 22 is 549 steel spec no is 549 , 14 5305 009851 screw slotted rd hd or cheese hd m4 x 12 is 1366 with punched washer b4 point 5 is 2016 drg no impd 0496 a item no 7 spec no cqae 1940 1575 a , 14 1940 000220 ramp outboard drg no imsa 0054 a and connected drawings spec no ind eng prov 1092 a , 14 2090 000050 panel splash port with u brackets drg no impd 0548 and impd 0549 spec no cqae 1940 1575 a , 14 2090 000056 pad rubber 12 mm thick x 50 mm wide x 1900 mm long drg no impd 0547 item no 7 spec no cqae 1940 1575 a , 14 2090 000057 pad rubber 12mm thick x 28 mm wide x 2150 mm long drg no impd 0547 item no 8 spec no cqae 1940 1575 a , e2 5315 003918 pin lock inboard drg no impd 0556 a spec no ind eng prov 1092 a , 14 5305 009848 screw machine csk head bm 8 x 90n is 1365 drg no impd 0496 a item no 12 spec no cqae 1940 1575 a //bid details 2 / 37

Shovel Loader Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors