Latest shunting neck repair Tenders | Government shunting neck repair Tenders

State Government

CTN :45317543

01 Jun, 2026 NA

Multi City - Telangana

Tender For tggenco-ytps-supply of gravimetric feeder spares for hp1103 bowl mill in boiler -ii division. - calibration roller complete assembly, bearing housing,inlet spanroller, bearing housing,weigh spanroller, bearing housing, calibration roller, grease sealfor belt takeup pulley for inlet, weigh span roller grease seal for inlet, grease seal for calibrating for inlet, tension roll grease seal for inlet, wear sleeve belt take up for inlet, tension roll wear sleeve for inlet, drag ling assembly for inlet, bolt for drag ling, bolt for belt takeup rail support for inlet, weigh span roller pre loading washer for inlet, bolt forweigh module, tension roll pivot bolt for inlet, bearing housing-ii for weigh span rollers, retainer ring for calio shaftfor inlet, weigh span roller retainini ring for inlet, tension roll retainer ring for inlet, inlet span roller retainer ring for inlet, weigh span roller hanger rod, ring,retaining, block belt takeup for inlet, belt takeup pulley assy shaft for inlet, inlet skirt (rh) for inlet, inlet skirt (lh), end skirt for inlet, levelling bar for inlet, head pulley wear sleeve, bulls eye glass for inlet, shear pin for coc shaft, coal on belt padoie for inlet, coal on belt grease seal for inlet, oil seal, 70x85x8 mm, counter weight,of weighsensing system

Central Government/Public Sector

CTN :45261948

28 May, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of rolling stock - ms scrap cut of condemned wagons 8 wheeler (b.g.) with out wheel set and trolly delivery on nagra siding condition wagon no.(1)nr 10039660434 boxn (2 )se 10079635553 boxn (3)nfr 10059660100 boxn (4)se 99078460021 brhn (5)se 10079665284 boxn (6) er 72029565792 bobrn note:- delivery on actual weighment basis. maximum permissible deliverable quantity is lot qty. 06 nos (62.340 mts) cutting allowed for easy loading returnable items will not be delivered and will be returned by the purchaser as per the lists attached at the sr. no. 18,19 and 20 in the special condition for sale attached with the auction catalogue in returnable items list centre pivot retainer will be add and sab control rod head as sab with control rod, not returnable items 1. foot step 2. loaded tie rod 3. sets of pipe lot qty. on approx basis weight 06 nos (62.340 mts) advice n0te no.-25-03387 dt-20.03.26.,003391 dt-20.03.26 and 25-03385 dt-20.03.2026note:- wagon lots to be sold on number basis and delivery in mts basis, purchaser should read the nagra siding condition of special condition of e- auction governing the sale and satisfy themselves before bidding.note-as per e-auction terms and condition goverining sale of scrap material through e-auction (revised on 07.05.2026), delivery of any scrap lot shall be permitted only after receipt of full sale value of sold lot

Central Government/Public Sector

CTN :45176815

02 Jun, 2026 NA

Barmer - Rajasthan

Tender For supply of assy concentric sleeve cylinder , assy pivot bush wb , ball joint assy upper , ball joint lower wb , assy pivot bush front suspension lower link , anchor bolt with nut t way , assy lower wish bone complete right side , mounting pin lower w bone front bolt and nut , assy link front anti roll ball , front axle c v shaft axle pin , seal oil axle tube , bearing axle tube left right , bearing and seal assy , ring snap , retainer nut , assy set back leak hoses , o ring injector , air filter element , fuel prime filter , assy fuel filter w plastic , bush ball set gear shift , o ring 28 3a nitrile ts 16222 , assy front shock absorber with bush , tie rod assy , centre link assy , kit pad front , jubilee clip two inch , jubilee clip half inch , hex flange bolt , assy gasket exhaust manifold , assy hl with blinker lh rhd , assy hl with blinker rh rhd , lamp assy front fog both side , 2p bot mtg mega fuse box base 125a 500a , realy 40 a co contact , power relay 12v 70 with resistor , micro relay 20a 1 no r-engineering , mini relay 30a , fuse ato blade 5a iso 8820 , fuse ato blade 15a iso 8821 , fuse ato blade 10a iso 8822 , fuse ato blade 20a iso 8822 , wh font xenon 2.2 l euro v air bag , fuse mini blade 20a iso 8820 , fuse mini blade 10a iso 8820 , fuse mini blade 05a iso 8820 , fuse mini blade 30a iso 8820 , fuse mini blade 25a iso 8820 , vehicle speed sensor face lift , assy battery holding clamp , crank position sensor , cam sensor , front axle wheel speed sensor , rear wheel speed sensor , zorik spray , front power window sw , assy combination sw , wh esm xenon , insulation tape , t bolt , head lamp blub , brake disc , egr module assy ) /bid number : gem/2026/b/7532092 * /dated: 12-05-2026 & & / bid document 1 / 43

Central Government / Public Sector

CTN :45146145

19 May, 2026 NA

Multi City - Telangana

Tender For auction sale of depot ferrous scrap - 12161ms26b, 98050011, quantity- 159.920 mts. scrap condemned unserviceable ms- cs mixed scrap of carriage and wagon and loco items consisting of bolts, nuts, pins, washers, cotters, head blocks, distance blocks screw rods, handle supporting bare plates, ms back locks, mmts racer cover, locking screws, nuts, bmbc components, jigs fixtures and loose spares, safety nuts, jack wheel arms, schaku couplers, coupler spares, tension rods, sheet cut pieces, levers, links, iron skids, anti roll bar with fork link, pins electroplated, cut pieces of angles, pipes, channels, flats, plates, rod cut pieces, sabs, cbc housings, common pipe bracket, pivot caps, buffer plates, cbc coupler handles, coupler rods, barrel bush, silent blocks, shackles, wide jaw adaptor, clamps, compensating ring, wire rope, push pull rods, towing trolley, jack frame, anchor links, lashing chain assembly, destroyed hangers and blocks, cap for fuel inlet pipe assembly, cbc back stopper plates, brackets, gear wheels, sheets, pivots, washers, equalizing stays, dampers, shock absorbers, dmb rings, dashpots, trolley wheels, brake shoes, compressor parts, brake heads, keys, dip lorry wheels, stays rings, chain cut pieces, draw bar spindle rod, draw bar support beam, ferrous scrap of emus, body gear, under gear, spring gear, draw gear, cbc operating handle, cbc supporting device, cbc support plate, air spring suspension bellow, suspension rod, socket, ring retainer, long bolts, mmts rear cover, speedo meter cover, retainer cap, brake cylinder, brake calliper, center pivot, equalizing lever, axle box covers, berth and door frames, filters, lever hangers, ci cylinder bodies, diesel loco items, ci hose cocks, piston, piston trunk, ratchet with screw rods, flanges, destination boards, small dia. springs, hooks, articulated lock lift lever assembly, collars, links, pivots, cylinder body, bp and fp cocks, c.r.tank, locking screw, locking cups, dmb ring, sab end push rod, sand ejectors, adaptors, wearing plate, centre pivot cover, z levers, springs, caliper bolts, reducing bushes, control arms, seaters, center pivot tops, pull rods, punching dies, round rods, bogie under frame cut pieces, ms drilling jig, horizontal bolts, hex bolts with nuts, dividing plates, side bearer guide, lever box, center pivot bottoms, ct rb bearing components, fabricated structures of sorts and sizes, with or without attachments of rubber, fiber, nylon bushes and other similar carriage, wagon, mmts, emu, dmu and loco items including rusted and corroded sheets. location- bin no- 161, left side of road no- 1. hsn code- 72044900. gst- 18 percent. note- delivery on actual weighment basis only. special note: overload of the carrying capacity of the vehicle will not be permitted at the time of taking delivery, as per motor vehicle act 1988.

Central Government/Public Sector

CTN :45109290

21 May, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of rolling stock - ms scrap cut of condemned wagons 8 wheeler (b.g.) with out wheel set and trolly delivery on nagra siding condition wagon no.(1) sc 30099060180 bcn (2 )se 30079060858 bcn (3)cr 30019033379 bcn (4) special repair 30069003964 bcn (5) ne 30048863114 bcn note:- delivery on actual weighment basis. maximum permissible deliverable quantity is lot qty. 05 nos (64.240 mts) cutting allowed for easy loading returnable items will not be delivered and will be returned by the purchaser as per the lists attached at the special repair. no. 18,19 and 20 in the special condition for sale attached with the auction catalogue in returnable items list centre pivot retainer will be add and sab control rod head as sab with control rod, not returnable items 1. foot step 2. loaded tie rod 3. sets of pipe lot qty. on approx basis weight 05 nos (64.240 mts) advice note no.25-03316 dt-20.03.26, 25-03287 dt-02.03.26 and 25-03385 dt-20.03.26 note:- wagon lots to be sold on number basis and delivery in mts basis, purchaser should read the nagra siding condition of special condition of e- auction governing the sale and satisfy themselves before bidding.

Central Government/Public Sector

CTN :45109291

21 May, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of rolling stock - ms scrap cut of condemned wagons 8 wheeler (b.g.) with out wheel set and trolly delivery on nagra siding condition wagon no.(1)wr 10089708605 boxn (2 )er 72029561213 bobr (3)se 10079665215 boxn (4)sr 10069660626 boxn (5)sc 10099661655 boxn (6) er 72029577733 boxn note:- delivery on actual weighment basis. maximum permissible deliverable quantity is lot qty. 06 nos (60.920 mts) cutting allowed for easy loading returnable items will not be delivered and will be returned by the purchaser as per the lists attached at the sr. no. 18,19 and 20 in the special condition for sale attached with the auction catalogue in returnable items list centre pivot retainer will be add and sab control rod head as sab with control rod, not returnable items 1. foot step 2. loaded tie rod 3. sets of pipe lot qty. on approx basis weight 06 nos (60.920 mts) advice n0te no.-25-03316 dt-20.03.26. and 25-03385 dt-20.03.2026note:- wagon lots to be sold on number basis and delivery in mts basis, purchaser should read the nagra siding condition of special condition of e- auction governing the sale and satisfy themselves before bidding.

Central Government/Public Sector

CTN :45031566

07 May, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of rolling stock - ms scrap cut of condemned wagons 8 wheeler (b.g.) with out wheel set and trolly delivery on nagra siding condition wagon no.(1)se 100796660135 boxn (2 )se 10079636536 boxn (3)wr 10089762102 boxn (4)sc 10099663208 boxn (5)se 10079768275 boxn (6) se 10079863314 boxn note:- delivery on actual weighment basis. maximum permissible deliverable quantity is lot qty. 06 nos (54.630 mts) cutting allowed for easy loading returnable items will not be delivered and will be returned by the purchaser as per the lists attached at the sr. no. 18,19 and 20 in the special condition for sale attached with the auction catalogue in returnable items list centre pivot retainer will be add and sab control rod head as sab with control rod, not returnable items 1. foot step 2. loaded tie rod 3. sets of pipe lot qty. on approx basis weight 06 nos (54.630 mts) advice n0te no.-25-03391 dt-20.03.26. note:- wagon lots to be sold on number basis and delivery in mts basis, purchaser should read the nagra siding condition of special condition of e- auction governing the sale and satisfy themselves before bidding.

Central Government/Public Sector

CTN :45031567

07 May, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of rolling stock - steel scrap cut of condemned wagons 8 wheeler (b.g.) with out wheel set and trolly delivery on nagra siding condition wagon no.(1)sr 10069760807 boxnr (2 )wr 25089600774 boxnr(3)se 10079723427 boxnr r(4) se 10079666779 boxnr (5) sc 25099860205 boxnr (6) sc 10099662324 boxnr . note:- delivery on actual weighment basis. maximum permissible deliverable quantity is lot qty. 06 nos(47.080mts) cutting allowed for easy loading returnable items will not be delivered and will be returned by the purchaser as per the lists attached at the sr. no. 18,19 and 20 in the special condition for sale attached with the auction catalogue in returnable items list centre pivot retainer will be add and sab control rod head as sab with control rod.not returnable items 1. foot step l 2. loaded tie rod 3.sets of pipe. lot qty. on approx basis weight 06 nos(47.080 mts) advice note no.- 25-03391 dt-20.03.26. note- wagon lots to be sold on number basis and delivery in mts basis, purchaser should read the nagra siding condition of special condition of e- auction governing the sale and satisfy themselves before bidding.

Central Government/Public Sector

CTN :44934793

28 Apr, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of rolling stock - ms scrap cut of condemned wagons 8 wheeler (b.g.) with out wheel set and trolly delivery on nagra siding condition wagon no.(1) nr 30039006704 bcn (2 )cr 30019060801 bcn (3)sc 30099082823 bcn (4) nr 30039021394 bcn (5) special repair 30069060905 bcn note:- delivery on actual weighment basis. maximum permissible deliverable quantity is lot qty. 05 nos (64.100 mts) cutting allowed for easy loading returnable items will not be delivered and will be returned by the purchaser as per the lists attached at the special repair. no. 18,19 and 20 in the special condition for sale attached with the auction catalogue in returnable items list centre pivot retainer will be add and sab control rod head as sab with control rod, not returnable items 1. foot step 2. loaded tie rod 3. sets of pipe lot qty. on approx basis weight 05 nos (64.100 mts) advice note no.25-02727 dt-03.01.26, 25-03287 dt-24.02.26 and 25-03385 dt-20.03.26 note:- wagon lots to be sold on number basis and delivery in mts basis, purchaser should read the nagra siding condition of special condition of e- auction governing the sale and satisfy themselves before bidding.

Central Government/Public Sector

CTN :44934794

28 Apr, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of rolling stock - ms scrap cut of condemned wagons 8 wheeler (b.g.) with out wheel set and trolly delivery on nagra siding condition wagon no.(1)er 72029563576 bobrnel (2 )sc 10099662898 boxn (3)sc 10099661358 boxn (4)sc 10099560965 boxn (5)er 72029566201 bobrnel (6) cr 10019660324 boxn note:- delivery on actual weighment basis. maximum permissible deliverable quantity is lot qty. 06 nos (60.510 mts) cutting allowed for easy loading returnable items will not be delivered and will be returned by the purchaser as per the lists attached at the sr. no. 18,19 and 20 in the special condition for sale attached with the auction catalogue in returnable items list centre pivot retainer will be add and sab control rod head as sab with control rod, not returnable items 1. foot step 2. loaded tie rod 3. sets of pipe lot qty. on approx basis weight 06 nos (60.510 mts) advice n0te no.-25-02727 dt-03.01.26,25-03287 dt-24.02.26 and 25-03385 dt-13.03.26 note:- wagon lots to be sold on number basis and delivery in mts basis, purchaser should read the nagra siding condition of special condition of e- auction governing the sale and satisfy themselves before bidding.

Shunting Neck Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors