Latest shunting contactor Tenders | Government shunting contactor Tenders

Central Government/Public Sector

CTN :45736905

13 Jul, 2026 NA

Bhusawal - Maharashtra

Tender For supply of set of support plate for shunting contactor as per clw drg. no. 2twd.111.076a alt-4. [ warranty period: 30 months after the date of delivery ] ]

CTN :45737174

21 Jul, 2026 NA

Howrah - West Bengal

Tender For supply of shunting contactor tips fixed and mobile to clw drg. no. 3twd/111/051, alt-8 and confirming to specification 4tes.111.029 alteration-2 or latest. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variationpermitted: max 8 lacs ] ]

CTN :45727896

16 Jul, 2026 NA

Howrah - West Bengal

Tender For supply of spring of moving control lever for shunting contactor as per clw drg no. 4twd.111.046a alt.2 [ warranty period: 30 months after the date of delivery ] ]

CTN :45714279

09 Jul, 2026 NA

Kanchrapara - West Bengal

Tender For supply of flexible shunt for shunting contactor as per clw drawing no 3twd.111.062,alt-a or latest if any [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45703049

03 Jul, 2026 4.15 Lacs

Kollam - Kerala

Tender For procurement of spares for bag stitching machines - pressure foot guide am (18341/28), throat plate screw (23473/28), thread tension screw (7023/f), thread tension nut (85), tension disc (54), tension spring (95), feed dog arm pin (7020/e), feed dog arm pin nut (2710/as), drive pin (2710/c), needle bell crank taper pin screw (2701/m), needle drive arm bearing cap (2714/r), needle drive arm end screw (2714/q), sewing head fixing nut (5254/18), looper screw (6789/18), looper nut (6790/18), grub screw eccentric (2700/b), grub screw special (2700/ba), pressure foot roll screw (18339/18), needle tension spring (2710/b), screw special (16791/18), needle drive sleeve (2714/e), 1/4 dia brt ms washer, 5/16 dia plain washer, screw special (76), oscillator bar (7340/b), looper oscillating block screw (3010/e), looper clamp assly (20792/38), looper drive link (3010/0), looper drive link taper pin (3010/ca), nibbler knife (11025/38), needle bar thread eyelet (2714/d), needle clamp nut (2714/cj), feed dog am bell crank (7020/s), feed dog arm pin sleeve (7020/f), feed dog am pin spring (3014/c), oscillator pin (2701/s/hs), feed dog strut (2702/j), feed dog strut retainer (2703/x), assly oscillating block complete (16502/38), looper (3010/j), needle (30), needle drive link (2703/aa), needle drive link taper pin (2703/ab), grub screw standard (2710/fa), screw special (3010/db), nut special (2710/pp), nut special (3010/ab), needle bar bush (2714/b), pressure foot hinge pivot screw (2703/ja), screw special (2437/18), fibre disc retaining screw (2714/j), thread eyelet (196), feed dog arm shaft nut (2710/an)

CTN :45702689

07 Jul, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot non ferrous scrap - lot no.p.nfc-1.bin no- 7.exmp.06.2026-27.08 description- scrap copper lump & sheets (comprising of fire bronze pieces, plats, stays, rivets, stude, rods, pipe etc) copper wire without insulation. copper boring & turning. our offer:- scrap copper miscellaneousllaneous with or without iron attachment. such as- rt dropper clip, catenery clip,contact tips for cgr (only copper), contact liver for cgr, bus bar, copper boring, plier, flexible shunt and mobile contact, scrap copper pipe,transformer oil cooler tube, rectifier bus bar , loop copper pipe, loader unloader pipe for a/c, half round oval contact copper, finger contact, stud bolt, copper ferule, carbon brush copper pigtail, copper tube, blow out coil for line contactor, r b shunt, shunt for armeter, blow out coil for shunting contactor, battery isolation switch, copper connecting angle, copper briddle wire, ptfe neutral section runner, section insulator runner, copper tubular terminal, discharge valve, copper socket, set of electrode & nozzle & other copper miscellaneousllaneous in bin no-7. qty=3686 kgs. loading will be done by purchaser's own arrangement.

Central Government/Public Sector

CTN :45692093

01 Jul, 2026 NA

Rourkela - Odisha

Tender For spares for welding stand pivot assy. at(14items) comprising of following: - shaft,85/40x197mm,pivot,pd/r-375284,p:15 , - screw rod,33x327mm,pivot,pd/r-375285,p:1 , - plate,140x122x22mm,pivot,pd/r-375285,p:2 , - block,140x29x25 mm,pivot,pd/r-375285,p:3 , - plate,82x49x20 mm,pivot,pd/r-375285,p:4 , - bush,80/60x43mm,br,pivot,pd/r-375285,p:5 , - bush,35/25x54mm,br,pivot,pd/r-375285,p:6 , - fab. flange assy,pd/r-375285,p;7(8-15) , - fab block assy,pvt,pd/r-375284,p:7(8-14) , - flange assy,f/pivot,pd/r-375284,p:1(2-6) , - bar assy,f/pivot,pd/r-375283,p:10(11-12) , - bar,475x74x20 mm,f/pivot,pd/r-375283,p:9 , - rlr beam assly,f/pivot,pd/r-375283,p:1 , - bush,dia.20/30x28,psa m2,pd/r-90895,p:6 ,

Central Government/Public Sector

CTN :45682903

09 Jul, 2026 NA

Erode - Tamil Nadu

Tender For supply of set of springs for ep contactors consisting of 02 items as follows (1) spring for shunting contactor as per clw drg.no. 4twd.111.047a with latest alteration - qty - 100 nos / set (2) spring for motor contactor as per clw drg. no. 4twd.112.029a with latest alteration - qty - 30 nos / set [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45678815

06 Jul, 2026 NA

Kinnaur - Himachal Pradesh

Tender For supply of spares for jcb - 320 a5535 adaptor inlet manifold , 320 a0543 stud m6x80x1 , 400 y4200 cowing fan 578 mm , 2206 0816 clip worm drive 8 to 16 mm , 826 11017 tie cable , 400 y1265 cooling pack assy , 335 y5197 bonnut , 1411 0003d washer 3 by 8 med plain , 1420 0007z washer m8 , 826 1254 nut rivet , 401 g33390 roof moulding trimmed , 334y0970 1 door assy tinned glass left side , 334y0965 1 glass frame side window tinned glass left side , 334y4429 1 wiper motor assy front wiper , 333 d8588 bracket locking c , 333 y8264 tape reflective white , 335 y5201 pannel side grille lh , 335 y5200 pannel side grille rh , 1305 0308z set screw m8x30 , 335 y5268 hose 10bsp hp 2030 mm alt pt no 332 y6629 , 335 y5266 hose 10bsp hp 1275 mm alt pt no 332 y8480 , 400 u8762 adopter top hose , 335 y4035 grille front , 646 05321 adhensive , 128 f8985 fender rear lh , 400 r3673 adoptor top hose dia 48 , 400 r3453 adoptor bottom hose , 333 y8199 track rod link assy , 614 80055 hose 5 by 8 bsp hp 550 mm , 835 00017 cap grease nipple , 335 y8910 pin pivot tipping link end , 335 y7803 pivot pin dipper end

State Government

CTN :45667106

30 Jun, 2026 NA

Multi City - Telangana

Tender For supply of spares of packing machine 2.5 kg 1.2kg - web belt-285l (paper pulling belts), timing belt,width-25mm, type-at10, length-800, item code-dt10149, timing belt-width -50mm, type at10,length-1940mm, item code-dt10113, timing belt-210l (3/8 inchpx56 teethx3/4inch width), item code-dt10047, timing belt-240lx19wx3/8inch p,item code-dt10127, horizontal heaters-3/8x270l 170vx225w drawing no.509sk82848, vertical seal heater 110v 500w 420lg, item code -fh10233, drawing no -5090200006, vibrating fork level sensor, lsv-t1-h0-g4-pb2+nfl-c4-ei-oul200, item code-elv0078, paper mark sensor datasensor make (i-sensor), item code -epm0013, photo electric sensor, model no:bup-30-p, item code -esp0108, thermocouple, item code- fh10011a, drawing no -750200035a, rod type sensor item code -fh10043c, drawing no -4041100013c, proximity sensor-m18 std pnp, diffused ir sensor, m 18/65, pnp, 10, item code -esp0080, encoder, item code - fp10277, camozzi -double acting cyl dia 32, stroke-20, 31f2a032a020, item code - nc10363 for horizontal jaw, camozzi -qn1a32a10 short stroke single acting cyl -dia 32 stroke 10,item code -nc10279 for knife, camozzi - 31m2a025a080 compact double acting cyl. dia 25 stroke x 80, item code - nc10500 for web, camozzi -31m2a032a015 compact double acting cyl magnetic dia.32 stroke 15, item code - nc10476 for break, camozzi - single solonoid valve-5/2 way-1/8 with 24 dc coil-358-015-02-u77, item code - nv10234, camozzi - single solonoid valve-3/2 way-1/8 with 24 dc coil-338l-015-02-u77, item code - nv10236, knife guide item code - cd45505b, drawing no -1010600002b, knife guide plate, item code - cd60108, drawing no -509sk77470, spline shaft (2-dpm 1530+570l thk) item code - cd63442a, drawing no -5090405000a, driving shaft item code - cd53126b, drawing no -4960400011b, worm gear box-vf44v 7 hs b3,item code - fg10060, worm gear box shaft item code - cd32708b, drawing no -316sk56171b, driven bevel gear, item code - cd38690a, drawing no -3661300017a, driving bevel gear item code - cd38689b, drawing no - 3661300016b, worm bonfiglioli gear motor 20:1, 0.18 kw , vf30f1-20p63b5v6 + bn63b4,item code - fg20066, sprocket 19 teeth 1/2 pitch,item code:cs30182, drawing no:260sk23375, sprocket 1/2 inch p x 38 teeth (plate type) item code:cs30049a, drawing no: 06090049a, chain simplex 1/2inch pitch,item code: cc10001, coupling od 27mm x id 19 mm x 40 mm lg, item code - cc20046, spline shaft nut, item code - bl20014, needle roller bearing hk 1612 ntn make, item code -bn10053, deep groove ball bearing 61808 zz skf, item code -bb10227, bearing (skf) 608 zz, item code - bb10058, pivot pin long item code - cd63926, drawing no -509sk80490, spacer for rear jaw 25 lg item code - cd63633a, drawing no -509sk80366a, spacer for front jaw 17 lg, item code - cd63632a, drawing no -509sk80365a, crank drive shaft, item code -cd58348c, drawing no -5091400004c, compression spring, item code -cs40423, drawing no -1010600013, tension spring, item code -cs40428c, drawing no -5040715010c, tension spring for dancer, item code -cs40434a, drawing no -5092203003a, knife, item code -ck20210, drawing no -509sk82125, knife holders (knife guide pin-a),item code:cd45508, drawing no:104sk64104, knife holders (knife guide pin-b),item code:cd60107, drawing no:509sk77473, vigor make, programmable controller,model no.vb-1pg, unison-ssr, 25amp, model 801 zda 48 25 01, output ac voltage 24-480vac., barings and bushes, vertical sealing assembly, videojet tto 6210 printer rubber pads, schneider electric encoder cable-5m, 3x2x0.14 mm2 +2x0.34 mm2 shielded, motor end 12-pin circular connector m23,device end 10-pin connector rj45, order no.vw3m8102r50 for servo drive lxm32cd30n4, schneider make, 3n lug type pneumatic air shaft code no.cm10390, drawing no.5095k76930, temperature controller model no.sr1, shimaden make, auger for 2.5kg item code:-ca32408,drawing no.509sk82247, gear moter bn80b4, kw-0.75, rpm 1400 item code -em40236

Shunting Contactor Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government