Latest side drone Tenders | Government side drone Tenders

Central Government/Public Sector

CTN :45324585

15 Jun, 2026 23.73 Lacs

Ooty - Tamil Nadu

Tender For providing and laying cement concrete road for approach to n12 and s12 tower and near stone quarter at radio astronomy centre rac, ncra tifr, post box no. 8, udhagamandalam ooty, dist. nilgiris, state tamilnadu pin 643 001.

State Government

CTN :45088300

04 Jun, 2026 6.71 Lacs

East Nimar - Madhya Pradesh

Tender For corrigendum : work for providing and laying dry stone pitching at embankment slope of railway line between railway gate and underpass along boundary wall at shree singaji thermal power project (sstpp) khandwa.

State Government

CTN :45345707

12 Jun, 2026 24.00 Lacs

Etah - Uttar Pradesh

Tender For supply of supply of 11 kv line material , supply of lt line material , safe carriage of 11 kv line material , safe carriage of 8.5 m pcc pole , safe carriage of 11 m stp , erection of 8.5 m pcc single support , erection of 11 m stp single support , erection of 8.5 m pcc double pole , erection of 11 m stp section double pole , dismentalling old weseal conductor , laying acsr weseal conductor , erection of stone pad , erection of barbed wire , erection of f bracket , erection of danger board , erection of pg clamp , erection of allunimum paint , erection of red oxide paint , erection of holding clamp , laying of gi wire 8 swg , laying of gi wire 10 swg , erection of earthing complete , erection of stay set complete , dismentalling of st pole etc , safe carriage of dismantilled material , safe carriage of dismantilled st pole etc , safe carriage of lt line material , safe carriage of lt ab cable , dismentalling of lt ab cable , erection of lt cable , safe carriage of dismantilled lt ab cable

Central Government/Public Sector

CTN :45138876

23 Jun, 2026 9.23 Crore

Mumbai - Maharashtra

Tender For corrigendum : supply of shifting of secondary substation at workshop to frere basin compound - phase sequence testing and commissioning of ht cable , supply of straight through transition ht cable joint optional , making of ht cable transition joint pilc to xlpe optional , excavation of ht cable trench in soft soil or asphalt , ht cable trench excavation in concrete road optional , laying of ht xlpe cable 3cx240sqmm in excavated trench , laying of ht cable in rcc pipe or existing duct , supply of 200mm dia rcc pipe np2 class with collars , laying of rcc pipe and fixing of collars , supply of lt xlpe cable 3.5cx400sqmm to fp 6a , supply of lt xlpe cable 3.5cx400sqmm to fp 11 , supply of lt xlpe cable 3.5cx300sqmm to fp 1a , supply of lt xlpe cable 3.5cx300sqmm to fp 3 , supply of lt xlpe cable 3.5cx300sqmm to fp 4 , supply of lt xlpe cable 3.5cx300sqmm to fp 5 , supply of lt xlpe cable 3.5cx300sqmm to fp 6b , supply of lt xlpe cable 3.5cx300sqmm to fp 6c , lt cable trench excavation in asphalt paver area , laying of lt cable 3.5cx300 or 400sqmm in excavated trench , laying lt cable 3.5cx300 or 400sqmm in pipe or duct , supply of lt xlpe cable 3.5cx70sqmm to old cme building , excavation of lt cable trench for 70sqmm cable , laying of lt cable 3.5cx70sqmm in excavated trench , laying of lt cable 3.5cx70sqmm in rcc pipe or duct , cable termination material for 3.5cx70sqmm lt cable , cable termination installation for 3.5cx70sqmm lt cable , cable termination material for 3.5cx300sqmm lt cable , cable termination installation for 3.5cx300sqmm lt cable , cable termination material for 3.5cx400sqmm lt cable , cable termination installation for 3.5cx400sqmm lt cable , e-house foundation civil work , e-house shed supply and installation , rubble packing 250mm thick for cable trench reinstatement , stone metal 40-90mm layer for trench reinstatement , water bound macadam wbm layer for trench reinstatement , m10 grade rmc concrete levelling course , m40 grade rmc concrete road pavement , interlocking paver blocks 100mm thick , asphaltic macadam bitumen grade 60 70 regulating course , asphaltic concrete wearing course bitumen grade 60 70 , transporting surplus excavated material outside mbpa estate , dismantling of existing workshop substation equipment

Central Government/Public Sector

CTN :45292297

23 Jun, 2026 4.01 Crore

Mumbai - Maharashtra

Tender For supply of 22kv cable , 22kv joint , 6p6kv cable , 6point6 kv joint , 6point6 kv termination , rcc pipe , excavation i , excavation ii , excavation iii , laying , tracing , making straight through joint , termination , high potential test , phase sequence test , rubble packing , muccadam , stone metal , asphaltic concrete , asphaltic muccadam , cement concrete , reinstatement , steel work , inspection chamber

Central Government/Public Sector

CTN :45291377

12 Jun, 2026 45.84 Lacs

Cuddapah - Andhra Pradesh

Tender For supply of earth work in excavation , filling available excavated earth excluding rock , demolishing rcc work , providing and laying in position cement concrete , providing and laying in position specified grade of reinforced cement concrete , supplying and filling in plinth with sand under floors , steel reinforcement for rcc work , centering and shuttering including strutting lif in foundations footings bases of columns , centering and shuttering including strutting lif columns pillars piers abutments posts and struts , dry stone pitching 22 point 5 cm thick , neat cement punning , demolishing brick work , brick work with non modular fly ash bricks , finishing walls with textured exterior paint , finishing walls with 100 percentage premium acrylic emulsion paint , 15 mm cement plaster , random rubble masonry with hard stone , structural steel work riveted bolted or welded in built up , surface dressing of the ground including removing vegetation , removing white or colour wash by scrapping , providing and fixing glass panes with putty and glazing clips in steel doors , providing and fixing glazing in aluminium door window ventilator shutters , providing and fixing aluminium work for doors windows ventilators , providing and fixing gi chain link fabric fencing , providing and fixing ist quality ceramic glazed wall floor tiles , grading roof for water proofing treatment with cement concrete , repair to plaster of thickness 12mm to 20 mm in patche , providing and laying water proofing treatment on roofs of slabs , 0 mm thick factory made polyvinyl chloride pvc door shutter , providing and fixing factory made panel pvc door shutter consisting of frame , providing and fixing on wall face unplasticised rigid pvc rain water pipes , providing mixing and applying sbr polymer , providing and injecting approved grout 2 percentage of weight of cement used modified cement slurry made with non shrink compound in concrete rcc work , providing and injecting approved grout cement slurry made with shrinkage compensating cement in concrete rcc work , providing and injecting approved grout epoxy injection grout in concrete rcc work of approved make , providing laying spreading and compacting graded stone aggregate

CTN :45280777

11 Jun, 2026 16.00 Lacs

Srinagar - Jammu And Kashmir

Tender For supply of construction sub base and base 168 sqm , supply and stacking of graded stone aggregate , providing and laying wet mix macadam on prepared sub grade sub base , providing and applying tack coat using hot straight run bitumen , providing and laying 15mm thick premix bituminous macadam base course with stone aggregate , providing and laying 15mm thick semidence bituminous concrete using material aggregate , curbing , providing and laying stone soling dully hand packed , providing and laying in position cement concrete , providing and laying in position specified grade of cement concrete , centring and shuttering , synthetic layer , supply and installation of badminton post , badminton racket branded , water remover roller imported , water drainage system , tarpaulin , digital score board with accessories 2 by 3 , led sports light , installation and commission charges

CTN :45286611

28 May, 2026 6.00 Lacs

Bandikui - Rajasthan

Tender For wsp nirman karya dhanawad - excavation of earth up to a depth of 1.5 meters for foundations, trenches, drains, etc.; dressing and compacting the bed; watering; trimming the sides; removing excavated earth; backfilling voids with earth after the foundation work is complete; and disposing of surplus earth up to a distance of 50 meters. , cement concrete (1 part cement : 4 parts sand : 8 parts coarse aggregate / 1 part cement : 3 parts sand : 6 parts coarse aggregate) using 10 mm nominal size stone aggregate; including laying, compaction, curing, etc., for foundation work. , stone masonry for anicuts (check dams) using cement-sand mortar in a 1:6 ratio. , random rubble (r.r.) stone masonry in foundations and plinths using cement-sand mortar (1:6 ratio); including filling side joints/crevices, curing, etc. , stone pitching using single, hammer-dressed stones (15 to 30 cm thick), including supply and all necessary lifting/placement operations. , for culvert/bridge construction: laying/installing a single row of rcc (reinforced cement concrete) np3 hume pipes with the required gradient, using cement mortar (1:2 ratio), including collars. (excluding earth excavation, concrete, and masonry works; applicable for 450/500 mm diameter pipes). , cement plaster on walls (20 mm thick) using a 1:4 ratio mixture of cement and sand; including raking out joints and regular curing for 14 days. , cement concrete (50 mm thick) using a 1:2:4 mix ratio (1 part cement : 2 parts sand : 4 parts stone or brick aggregate of 12 mm nominal size); including mixing, laying, compaction, pressing, curing, etc. , display board and photo contingency

CTN :45275091

28 May, 2026 5.38 Lacs

Chandigarh - Chandigarh

Tender For providing & fixing of sanitary items and allied work in model jail sector- 51, u.t. chandigarh (fansi chakki, midday meal, music room) - excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : .2.10, all kinds of soil .2.10.1, pipes, cables etc, not exceeding 80 mm dia. .2.10.1.1, pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia metre .2.10.1.2, providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : .4.1, 1:2:4 (1 cement : 2 coarse sand (zone-iii) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources) .4.1.4, 1:5:10 (1 cement : 5 coarse sand (zone-iii) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) .4.1.10, brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and size in : .6.4, cement mortar 1:6 (1 cement : 6 coarse sand .6.4.2, providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (size 300mm x 600mm) .8.31, providing and fixing aluminium sliding door bolts, isi marked anodised anodic coating not less than grade ac 10 as per is : 1868), transparent. .9.96, 250x16 mm .9.96.2, as per detail attached ., providing and fixing aluminium tower bolts, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete .9.97, 200x10 mm .9.97.2, as per detail attached ., providing and fixing aluminium handles, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : .9.1, 125 mm .9.100.1, as per detail attached ., providing and fixing pressed steel door frames conforming to is: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including m.s. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by engineer-in-charge: .10.14, profile b .10.14.1, fixing with adjustable lugs with split end tail to each jamb .10.14.1.1, providing and laying polished granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the engineer-in-charge. .11.56, polished granite stone slab of all colour and texture exceptblack,

CTN :45290770

29 May, 2026 3.16 Lacs

Ernakulam - Kerala

Tender For mla-sdf- kothamangalam lac- 2025-26- setting up of open gym equipments at ward 15, kothamangalam municipality, ernakulam district - construction of open gym, 2.6.1:earth work in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by engineer-in-charge.all kinds of soil, 4.1.8:providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level:1:4:8 (1 cement : 4 coarse sand (zone-iii) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources), 5.1.2:providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources), 5.22.6:steel reinforcement for r.c.c work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelthermo - mechanically treated bars of grade fe-500d or more, 5.9.1:centering and shuttering including strutting, etc. and removal of form for:foundations, footings, bases of columns, etc for mass concrete, 16.83:taking out existing cc interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of engineer-in-charge., od289920/2025-2026:walker single- providing and fixing walker single fnf 004- minimum 100 nb gi c-class pipe- for main frame, minimum 32 nb gi c-class pipe- for leg frame, minimum 25 nb gi c-class pipe for handle frame, nylon 66 injection moulded casing clamps, lldp root molded seat with inbuilt bolts 3/8" x 1.5" foot rest, nylon 66 injection molded bearing cap & pipe cap, fully done by first coat of primer – jotun brad 40-50 micron thickness and top coat of pure polyester powder with 70- 80micron thickness powder coat, od289924/2025-2026:rider- providing and fixing fun rider (fnf 002)- minimum 100 nb gi c-class pipe- for main frame, minimum 32 nb gi c-class pipe for seat frame, minimum 40 nb & 25 nb c class gi c-class pipe for handle frame, minimum 32nb & 25nb gi c-class pipe with two handles for leg rest, lldp rotomoulded seat with inbuilt bolts 3/8" x 1.5" for foot rest & seat rest, nylon 66 injection moulded bearing cap & pipe cap, fully done by first coat of primer – jotun brad 40-50 micron thickness and top coat of pure polyester powder with 70- 80 micron thickness powder coat., od289921/2025-2026:ski trainer- providing and fixing ski trainer- fnf 014- minimum 100 nb g.i. c class pipes for main frame, minimum 40 nb g.i. pipe for foot rest pipe, minimum 40nb & 25 nb g.i. pipe for handle, minimum 25 nb & 40 nb gi c-class pipe for connecting pipe, lldp rotomoulded seat with inbuilt bolts 3/8" x 1.5" for foot rest, nylon 66 injection moulded bearing cap & pipe cap, fully done by first coat of primer – jotun brad 40-50 micron thickness and top coat of pure polyester powder with 70- 80micron thickness powder coat, od289922/2025-2026:abb trainer- providing and fixing abb trainer - fpspcl187- minimum 80 nb gi c- class pipe for main frame, minimum 32 nb gi c-class pipe for side frame, minimum 25 nb g.i. pipe for intermediate pipe, nylon 66 injection moulded bearing cap & pipe cap, fully done by first coat of primer – jotun brad 40-50 micron thickness and top coat of pure polyester powder with 70- 80 micron thickness powder coat ., od289923/2025-2026:cycle- providing and fixing cycle - fpspcl208 - 25 nb & 40 nb gi c-class pipe for main frame, 32 nb gi c-class pipe for seat frame, 25 nb

Side Drone Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector