Latest signaling light repair Tenders | Government signaling light repair Tenders

State Government

CTN :45231232

11 Jun, 2026 NA

Ghaziabad - Uttar Pradesh

Tender For corrigendum : supply and execution items for reliability improvement of signalling inst. section of sr. dste/1/lko of lucknow div. nr. - excavating and refilling of trench to the level of ground with rammed earth asper drg. no.(nr/s&t/con/1.1/97a) so as not to form a drain 0.3 mtrs wide & 1mtr deep on both side of the station along side the track. it shall confirm to the safe distance as per signalling and cable plan in all type of soil, it also includes clearence of roots of trees and bushes., excavating and refilling of trench 0.3 mtrs wide & 0.8 mtr deep on pitced/stone/bricks paved surface, road/crossing/platform etc. and restoration of surafce to original condition., laying of signalling/telecom/power cables of different sizes as per attached guidelines (drg. no.(nr/s&t/con/1.1/97a) or latest on signalling cable laying and as per cable route plan approved by railways through trenches, rcc pipe, dwc pipe, gi pipe etc and meggering of cable before and after its laying of all type of outdoor cables. contractor have to transport cable from any store of lko division to site carefully. meggering to be done for each drum separately. meggering sheets to be supplied and filled up by contractor and submitted to railways, as per instructions by consignee., supply and laying of 2nd class bricks in the trench and laying as per drg. no. (nr/s&t/con./1.1/97a) or latest and as per instruction of the site engineer., boring and trenchless cabling along with supply and insertion of hdpe/dwc self lubricated pipes as per rdso spec no. rdso/spn/204/2011 ver 1.1 or latest of 120mm nominal dia in the bore at the depth of 1.4 meter to 2.1 meter from formation level (level of earth below ballast) as per drawing and as directed by engineer incharge by trenchless technology for laying of signalling /telecom/power cable under track /culvert etc. cable laying covered separately. inspection-consignee for supply of dwc/hdpe pipe. the following required coupling arrangement should also be supplied: 1. suitable snap fit couplers withrubber o ring, 2. spacers, 3. tees. 4. bend. 5. end cap(1 no. =6mtr ,straigh tpipe). (a) the cost shall include horizontal boring through any intermediate obstruction, either natural or man made or any boundary etc. (b) the rate is inclusive of all the materials equipment and labour required for during trenchless horizontal boring under the railway track. nothing extra shall be admissible on any account than the rate quoted above. (c) the pipeis to be laid underrailway track/road /culvert. all necessary arrangement are to be provideand all precautions are to be end is not deviated from the horizontal level line by more than 250mm in horizontal and vertical direction. (d) the rate shall be inclusive of direction and protection of underground utilities encountered during boring. (e) the payment for boring shall be made only when dwc/hdpe pipe are laid in the bore., concreting unschduled items in concrete of 1:3:6 ratio in cement, coarse sand and aggregate 25mm at different places in the yard and plastering top in fine plaster of 1:4 cement sand ratio. it also includes the excavation of earth as required at site and as per instruction of site incharge. the volume in cubic metres shall include the volume occupied by any ci foundation, trestle, ms angle or flat or gi pipe required to be embedded in the casting. cement coarse sand and aggregate 25mm are to be supplied by the contractor., earth work for excavation and refilling around location boxes and signals etc. where necessary including 50m lead and 1.5m lift. the lead is to be measured from centre of gravity of location to the centre of filling and lift from main ground level. the earth work should be well rammed including breaking of clods, levelling and dressing etc. as per instruction of engineer at site., brick work with well burnt bricks in foundations and plinths with cement and sand (ordinary) mixture of 1:4 ratio. all material is to be supplied by th

CTN :45453094

29 Jun, 2026 NA

Varanasi - Uttar Pradesh

Tender For signalling work in connection with provision of one additional goods shed line of 750m at phephna station of bsb division & provision of multi section digital axle counter in berthing tracks & water logging track portions at bui & pep station of varanasi division.

CTN :45453188

01 Jul, 2026 NA

Varanasi - Uttar Pradesh

Tender For signalling work in connection with provision of second goods shed common running line of 750m at phariya station of bsb division.

Central Government/Public Sector

CTN :45453024

27 Jun, 2026 NA

Lucknow - Uttar Pradesh

Tender For "provision of indoor and outdoor signalling work in connection with ibs at 03 locations between nbp-jnh, jnh-sqn & jnh-byha section, addition & alteration in existing electronic interlocking system at janghai, nibhapur and baryaram stations and indoor signalling works at saraikansarai station of lucknow division."

CTN :45436041

29 Jun, 2026 NA

Howrah - West Bengal

Tender For howrah division- signalling work in connection with-schedule a1-signalling cost for proposal for extension of existing fob towards western side at nalhati station under sr. den/4/hwh.schedule a2-telecom cost for proposal for extension of existing fob towards western side at nalhati station under sr. den/4/hwh.

CTN :45409787

29 Jun, 2026 NA

Sealdah - West Bengal

Tender For signalling work in connection with elimination of manned /unmanned level crossing (lc) gate by constructing limited height subway (lhs) l.c gate no.98t(ply), 119be(sgv ), 122ct(sgv ), 141t(mbb ), 152e(jjg), 163ct(bqg), in knj-lgl section in sealdah division.

Central Government/Public Sector

CTN :45436000

26 Jun, 2026 NA

Multi City - Multi State

Tender For proposed signalling arrangements in connection with creation of maintenance facilities for conventional /3-phase memu rakes at tiruchchirappalli (tpj) -phase i (goc work)

Central Government/Public Sector

CTN :45453201

02 Jul, 2026 NA

Ambala - Haryana

Tender For (i) signalling work in c/w yard improvement under jurisdiction of aden/cdg .(ii) signalling work in c/w yard improvement under jurisdiction of aden/umb. (iii) signalling work in c/w yard improvement works in 20 yards under sr.den/iv/umb.

Central Government/Public Sector

CTN :45453204

02 Jul, 2026 NA

Ambala - Haryana

Tender For signalling work in c/w 1) upgradation of l-xing no. 4 at km 4.257 from 'b' to 'spl' class on sir-aadr section over ambala division2) upgradation of l-xing no. 90/b3 at km 105.682 from 'b' class to 'spl.' class on sir-aadr section over ambala 3) upgradation of l-xing no. 91/b4 at km 106.885 from 'b' class to 'spl' class on sir-aadr section over ambala division

Central Government/Public Sector

CTN :45431584

09 Jun, 2026 NA

Multi City - Gujarat

Tender For auction sale of depot ferrous scrap - 98050114 scrap release all types of railway ferrous material consisting of s&t, p way, works and ohe items c & w items- such as ms, gi, ci containing signalling units, rods, junction boxes, panels, ms gi structures, ladders, mast, rtu, cb, etc. and all other types of signaling items, gear case, the ground connection, ohe fitting, ms chains, heavy structure almirah/racks, rods angle, top housing, road bar, glude joint, ground connection channel, pipes, lc material, ladders, jali, spring plank, pantograph with or without pneumatic motor, gate, door, brake cylinder, tie bar, fencing, trolley, ms machines etc., tmt bars rods, pulley, rib cage, point machines without motors, wagon body cut piece bogies side frame, machines, sleeper, ms sheet, various types sleeper part, tie bar, fencing bars, i-beam, damaged empty drums, light fittings, rail & rail pieces, ms wires, junk light weight/corroded material consist of toughened sheets, m.s./gi sheets, grease seal, drum, wire, parts of rolling shutter, light weight cuttings, various damaged and rusty drums filled with coalter, dry paint, mud and dray fo if any of sort and sizes, g.i. buckets, steel buckets baskets, signal lamps, duct, vent pcs., fencing and pipes, wire mesh, stretcher, bicycle, pan, frames, electrical fittings, t.l. fittings, grill- jali, cabinet frames, rack ballast, rusted body and parts of weighing machine, electronic/electrical material, small rods angle, battery boxes, tool boxes, shovel, rail door handles, main door, foot plate, step plates, bench pipes, typewriter g.i. pipes, trolleys, water tank bond, location box with or without their component and wiring fittings, trolly, different type of ohe bonds of rail and other various ms fabricated structures, break load rings, pins, screw, bolts, spikes, keys, loco parts, stay rods, sleeve for centre pivot, pantograph parts, palm pull rods, lever, axle box housings, air motor, springs of pantograph, connecting rods, and other rods, rear cover of axle box housing, longer hanger, spare parts of spt machine, pipe fittings, end shield covers, break beam hangers, brake shoe, vertical lever, suspension levers, compressor spares, tension rods bushes, dash pots, ms& wi turning borings cut, collars, vehicle spares, ci items consisting of rusty and dusty drainage pipe, valve, meter, brake block, pulley, motors body, pipes, plates, d.v, vacuum cylinder chamber, pig irons pieces, signaling box ohe fittings, steel furniture consisting of chairs, tables, g.i. separation sheet, chair , stretcher, beds, ms rack, almira, other types of steel furniture of sorts and sizes, broken, damaged with or without wood, cushions, plastic, mica, foam seat attachment, parts brake liner, thrust bearing, spring, yoke, insulation block hangers, slides, locking rods, parts of point machine, a b cover, break head, cylinder head, pcs. of break beam, protective tubes, and other p-way fittings, coupler, knuckles, cp top/bottom, pu pad, narrow/wide jaw adapter, released bulk head components, wagon doors, cutting plate, and assorted cut pieces thereof, fabricated from irsm 44, etc. brake cylinder, cs & ci if any. valve, broken pcs. of bearings, inner and outer race of bearings, spares of break valve, trolley wheels, clamps, bmbc parts, pump shafts, impellers, tension device parts, fan armatures, chain sling, rev. center, hooks, spares of trucks, accessories of transformer, fish plates, hooks, silent blocks, cut pieces of plates, doors, angles, etc., all plastic items, rubber and wooden , fasteners such as bolts, nuts, and other related misc, etc., with or without, rail, of sorts and sizes with or without parts fittings and minor non-ferrous attachments, unserviceable. excluding items - railway track. remarks:the quantity estimation is based on visual observation and is indicative only. the lot has been prepared to clear the land before handing over the scrap yard for memu work. 2. loading will be allowed

Signaling Light Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector