Latest silent generator Tenders | Government silent generator Tenders

State Government

CTN :45348091

24 Jun, 2026 NA

Dhanipur - Uttar Pradesh

Tender For corrigendum : supply of single channel energy generator

Central Government/Public Sector

CTN :45576051

06 Jul, 2026 NA

Erode - Tamil Nadu

Tender For 3kva single phase portable petrol generator set (dg set) as per technical specification attached. make: honda (or) yamaha (or) birla or similar note: 1) firm should provide the point-wise remarks for all the 28 points given in the technical specification attached, other wise offer will not be considered. it must be complied on a point-wise basis and submitted separately. submission of only the firm?s catalogue, without point-wise compliance, will not be accepted. firm shall specify the product name and model no. also in their offer. 2) firm should submit authorized dealership certificate along with tender otherwise offer will not be considered. 3) test certificate to be submitted along with supply. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45329483

24 Jun, 2026 12.61 Lacs

Nagrota - Himachal Pradesh

Tender For corrigendum : provision of 01 x 30 kva genr with connected items as standby power requirements for sewage treatment plant under age (i) bhalra - supply, installing, commissioning and testing, water cooled, sound proof silent type, turbo charged, diesel engine driven generating set 30 kva (at 0.8 pf), 415v, 3 phase, 4 wire engine as per is: 10001/10002 and alterator as per is: 13364, complete with relay panel for automatic starting on mains failure, control panels having meters in an integral acoustic enclosure as per recommendation cpcb norms, comprising of the following:notes: quoted rates shall deemed to include the following also:-(i) supply of t and p and normal space ie., bi-hexagonal ring spanner set of 12 pieces - 01 set.(ii) fuel measuement gauge - 01 no, hand operated fuel lifting pump with steel pipe 40mm dia - 01 no, hydro meter - 01 no, set of fan belt, oil/ fuel filters initial filling of coolant (coolant-2liters).(iii) service maintenance manual along with cat part list and price list - 03 set each.(iv) make of engine and alternator will be got approved from age (i) bhalra before placing the order., (a) diesel engine. diesel engine developing suitable bhp, 1500 rpm inclusive of the following standard accessories:(i) radiator/ heat exchanger cooling system. (xiv) battery charging generator.(ii) spider coupling guard. (xv) industrial silencer.(iii) fly wheel. (xvi) lubricant oil cooler.(iv) fly wheel housing complete with starter gear ring and coupling. (xvii) flexible pipe for silencer. (v) fuel pipes. (xviii) battery volt meter.(vi) air cleaner. (xix) water temperature gauge, lub oil pressure (vii) fuel and lubricant oil filter. gauge.(viii) by pass filter. (xx) speedo meter and engine running hours meter.(ix) coolant inhibitor. (xxi) display for fault.(x) fuel pump. (xxii) turbo charger.(xi) water pump. (xii) lubricant oil pump.(xiii) self/electric starter.(b) alternator : synchronous alternator 3 phase 4 wire, 50 cycles 1500 rpm, self excited, self regulated, brushless type, 0.8 pf, 415v, ac supply, 30 kva capacity, copper wound, complete including necessary tools, mounted on strong rigid steel fabricated base frame and directly coupled through flexible coupling with diesel engine, complete all as specified and directed., (c) amf/ control panel : amf panel factory made of suitable capacity as per original equipment manufacturer make and specification or as approved by oem for dg set of capacity 30 kva of suitable size, indoor cubical type, front and back openable fabricated out of mild steel sheet 1.6mm thick grounted in floor with adequate pcc foundation and minimum consisting of following :(i) contactor of suitable size for 30 kva dg set.(ii) copper bus bar of suitable current rating and sensitivity relay set unit with auxiliary cts.(iii) electronic latch circuit with tripping indication.(iv) re-set facilities.(v) 3 phase mvr relay unit with single phase protection complete with 2 no nc auxiliary contacts.(vi) 3 phase avr relay unit complete.(vii) self sequential starting relay unit 12 volts dc complete with alarm and power contactor. (viii) electronic timer 220 volts for main contactor with 1 no nc auxiliary contactor.(ix) electronic timer 220 volts for fuel cut off operation with 1 no auxiliary contactor.(x) battery charging 2x12 volts 10 amp complete with digital voltmeter and amps meter, including trickle and boost charging, make : su-kam, amco, exide or any other make as recommended by the manufacturer.(xi) volt meter 0-500 volts panel mounting of size 96mm square with selector switch digital type.(xii) amps meter 0-100 amps with 3 nos cts, 400/5 and selector switch 96 mm square digital type.(xiii) frequency meter (45-55) hz, 415 volt, 96mm square digital type.(xiv) the amf panel should have manual by pass arrangement too in case of failure of amf panel., (d) fuel tank of capacity as per manufacturer recommendations.(e) base frame made out of suitable channel duly reinforced and provided with adequate nu

Central Government / Public Sector

CTN :45581430

29 Jun, 2026 NA

Vijayawada - Andhra Pradesh

Tender For supply of electro inflatable emergency balloon light tower including 4.5 meters electro balloon (cylindrical shape polyester-based cloth) with 5 mtr nylon stay wire ropes of dia 3 mm (3 nos) which canbe tied to the tower (balloon) and grouping hook in case of extra wind velocity, electro top cover made of moulded fibre glass material designed to fasten the tower balloon, one 400w inflatable balloon emergency tower light with generator complete with following accessories :- closed system set : recoil start portable acgenerating set comprising ac generator rated as 750va 230v/50hz, 4 stroke, ohv, single cylinder, 79.7cc, generator model : ep1000 with cpcb compliance. fuel tank capacity: 3.6 l for continuous running 6.5 hrs, 400 w led light with lumens: 42,000 / 51,000, balloon height in inflated condition from ground level of 4.5m-5m. and as per the rdso specification no. m.p -0.08.00.53(rev) 2004 or latest lamp and the air blower.( detailed description enclosed). [ warranty period: 30 months after the date of delivery ] ]

CTN :45575185

24 Jun, 2026 NA

Tiruvannamalai - Tamil Nadu

Tender For procurement of ece and eee lab equipments - single output regulated dc variable power supply, dual output regulated power supply, function generator, digital storage oscilloscope, dc voltmeter, dc ammeter, decade resistance box, decade capacitance box, decade inductance box, 8051 microcontroller kit, embedded trainer kit using lpc2148, lvdt sensor trainer kit, strain guage trainer kit, temperature measurement trainer kit, sim reader trainer kit, microwave testbench with reflex klystron oscillator, dc series motor with electrical workbench, single phase transformer, three phase transformer, loading rheostat 3 phase, single phase resistive load, three phase synchronous motor with electrical workbench, on/off control of lamp using solid state relay kit

CTN :45570395

08 Jul, 2026 NA

Betul - Madhya Pradesh

Tender For supply, installation and commissioning of lab equipments and smart class items etc - p, soxhlet extraction unit, tissue culture rack (caster racks), hot air oven stainless steel, flame photometer, heating mental with regulator cap 500 ml, digital colony counter, thin layer chromatography apparatus, micro pipette (fixed) 1- 5 ml, dissecting microscope, colorimeter, distillation apparatus double distillation capacity 5lt, laminar air flow horizontal, water and soil testing analysis kit, magnetic strirrer with hot plate, bionocularmicroscope, refrigeratorr, electronic balance (0.1 grm to 600 grm), desktop computer, lab table, f.e.t. characteristic apparatus, m.o.s.f.e.t characteristic apparatus, solar cell characteristic apparatus, single stage and double stage r.c. coupled amplifier/ feed back amplifier, transistorized push- pull amplifier, f.e.t. amplifier, hartley and colpitt s oscillator, zener regulated power supply, study of various a.c. bridges e.g., c.r.o. single trace 10 mhz, function generator (b)1hz to 10 mhz, series and parallel resonance circuit, spectrometer 6 / 7 , weight box, vernier callipers, digital multimeter, ldr characteristics apparatus., study of hall effect complete setup., function generator, impedance and power factor of lcr circuit, e/m by milikan s oil drop method, measurement of wave length of he-ne laser using ruler with laser complete setup, meter bridge (carey fostor bridge), desktop computer, lab table, lees apparatus, compound pendulum apparatus, bar pendulum apparatus, moment of inertia meter tot apparatus, maxwell needle apparatus, torsion pendulum apparatus, audio frequency oscillator, cathode ray tube (thompson method), jfet apparatus, photo diode apparatus, zener diode, transistor pnp and npn kit, compound microscope, dissecting microscope, binocular microscope, desktop computer, refrigeratorr, binocular

CTN :45577809

01 Jul, 2026 NA

Hyderabad-T - Telangana

Tender For supply of jntuh ucem idea lab machinery/equipment - single nozzle 3d printer , 3d scanner , co₂ laser cutting machine , soldering station , desoldering machine ,signal generator , drilling m/c (1 hp motor) , handheld high speed drilling m/c – 15000 rpm , portable welding machine , digital microscope

CTN :45578681

02 Jul, 2026 NA

Raipur - Chhattisgarh

Tender For supply of head up tilt test hutt , 10 multipara patient monitors with central monitoring station and remote viewing , ivus and nirs , high end echo machine with tee probe and 3d echo , pulsed field ablation console with 03 complete catheter kit , oct , orbital atherectomy - oad pump with 10 complete catheter kit , rota ablator , ambulatory blood pressure monitoring , treadmill test equipment , 48 hour holter machine , single chamber temporary pacemaker pulse generator , pft - pulmonary function test machine , 12 lead ecg machine , defibrillator , echo cardiography scanning machine (v2) (q2)

CTN :45562952

01 Jul, 2026 43.22 Lacs

West Tripura - Tripura

Tender For supplying, installation, testing and commissioning of equipments for electrical measurement, electrical workshop, electrical machine & power system laboratory at ttaadc polytechnic institute, khumulwng, west tripura for the project "improvement of infrastructure in ttaadc polytechnic institute, khumulwng, west tripura, district under higher education department” under the nec scheme. (2nd call) - supplying, installation, testing and commissioning of electrical measurement, electrical workshop, electrical machine & power system laboratory equipments/machineries of electrical engineering department at ttaadc polytechnic institute, khumulwng, west tripura under the nec scheme "improvement of infrastructure in ttaadc polytechnic institute, khumulwng, west tripura, district under higher education department." (2nd call), kelvin double bridge trainer kitthe instrument should have following features : easy illustration of kelvins bridge digital display (dpm) for null detection online product tutorialthe instrument should have following technical specifications :dc power supply : +5vknown resistance : r1=100k , 20k , 10k r3=1k , 200 , 100 dpm : 2vdimensions (mm) : 240 w x 345 d x 110 hunknown resistance : 0.3 , 0.4 , 0.8 mains supply : 230 v 10%, 50 hz, whetstone bridge trainer kitthe instrument should have following features :sample : constantan, nichromeprovided with dc power supply compact designeasy to operatethe instrument should have following technical specifications:dc power supply:5vgalvanometerdeflection:30 - 0 30resistance:80 unknown resistance type: variablerange:0 - 10k wire samples: -constantan: 1mnichrome:1mfuse:500mamains supply: 90 - 275v, 50hzdimensions (mm):w 345 x d 240 x h 110, experimentation with de sautys and schearing bridgethe instrument should have following features: - a complete set up with all necessary accessories inbuilt 1 khz sine wave generator with variable amplitude null detector with dpmtechnical specification: -sine wave generatorfrequency range:1khz 10%amplitude control output: up to 15vppfuse:500 ma, s/bdpm:200 mvunknown capacitor:0.1 f, 0.22 f, 0.47 fmains supply:230v ac, 10%, 50hzdimension (mm):w 345 x d 240 x h 110, experimentation with maxwells bridgethe instrument should have following features : illustration of both maxwells inductance bridge and maxwells inductance-capacitance bridge on a single board inbuilt 1 khz sine wave generator with variable amplitude null detector with dpmthe instrument should have following technical specifications :mains supply : 230 v 10%, 50 hzdc power supply : +12v, -12vsine wave generatorfixed frequency : 1khz 5%amplitude control range : upto 20vppunknown inductors : 10 mh, 20mh, 30 mh, 56 h, 24 h, 12 hdpm : 200mvunknown internal resistance : 470w, 10 , 20 , 30dimensions (mm) : w 240 x d 345 x h 110, measurement of three phase active & reactive power with single phase wattmeter technical specifications:analog meters: analog voltmeter, range : 300v analog ammeter, range : 2a analog wattmeter power supplies: operated on mains power 415v, 50hz +10%components are mounted on the panels are: capacitive load inbuilt inductive load inbuilt resistive load (external)salient features: three phase power light indicator for mains. front panel built with high class insulated bakelite sheet with sticker well printed circuits and symbols. mcb for short circuit protection connections are brought out through 4mm colored safety sockets. patch cords 4mm. the trainer is housed in metal cabinet. size of the trainer set 36 x 24 , power & power factor measurement by ct & pt in three phase circuittechnical specifications:power supplies: ac power supply 0-415v at 4a operated on mains power 415v, 50hz +10%digital meters: digital voltmeter digital ammeter , digital wattmeter (analog), digital power factor meter components are mounted on the panels are: 3 phase capacitive load (inbuilt) 3phase resistive load (external) 3phase inductive load (external) emergency stop

State Government

CTN :45554828

19 Jun, 2026 NA

Chandrapur - Maharashtra

Tender For work of loading, transportation, unloading of 200mva, 21/400/ 3 kv, single phase, generator transformer from gtr-7r location unit#7 to spare gtr location unit#8&9 500 mw at cstps, chandrapur.

Silent Generator Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector

State Government