Latest silica gel breather Tenders | Government silica gel breather Tenders

Central Government/Public Sector

CTN :45343198

02 Jun, 2026 NA

Indore - Madhya Pradesh

Tender For auction sale of others - released condemned and u/s scrap contain ferrous, copper, aluminum and pvc consisting, (1) rotary switch all size (16,63a etc), qty- 23 nos, (2) contactor all size (16,32a etc), qty- 30 nos, (3) led light fitting 18w/9w, qty-118 nos,(4) led light fitting b1, qty-110 nos, (5) led tube 9w, qty- 293 nos, (6) pcb for bldc fan 400 mm sweep, qty- 68 nos, (7) tail lamp fitting 110v, qty-07 nos, (8) return air filter 680 mm x 415mm, qty- 70 nos, (9) ac filters all size fresh & return air 620mmx 460 mm & 550mmx 500mm , qty-70 nos, (10) fresh air filters 480mm x 260mm, qty-120 nos (11) compressor scroll r22/r 407, qty- 20 nos, (12) led driver 9w & 18 w, qty-213 nos, (13) mcb & mpcb all size (6,16,32,63a etc). qty- 122 nos, (14) voltmeter 1000v/750v, qty-58 nos, (15) mmr 1000v, qty- 69 nos, (16) electronic thermostat 2-5 w, qty- 04 nos, (17) bldc fan 110 v dc, qty-170 nos (18) rmpu unit 7tr, qty- 02 nos, (19) mini pantry (hot case, 500w), qty- 16 nos, (20) mini pantry (deep freezer,25 ltr), qty- 16 nos, (21) condenser fan blade 21 inch/24 inch, qty-13 nos, (22) feeder contactor for lhb 1000a, qty- 03 nos,(23) contactor 200amp all, qty-22 nos, (24) regulated battery charger 6.5 kw, qty- 01 nos, (25) refrigerator 240/310 ltr, qty- 05 nos, (26) emergency battery charger 2.5 kw, qty-20 nos, (27) control transformer 100va 750v, qty- 40 nos, (28) control transformer 200va, qty- 19 nos, (29) control transformer 400va, qty-04 nos, (30) control transformer 300va, qty- 01 nos, (31) rc filter 415v, qty-24 nos, (32) control led driver pcb, qty-10 nos, (33) uic coupler 13 pin, qty- 43 nos, (34) heater unit complete, qty- 03 nos, (35) d.m plant, qty- 02 nos, (36) alternator 25 kw, qty-02 nos, (37) erru 25 kw, qty-02 nos, (38) 25 kva inverter, qty- 02 nos, (39) spare contactor coil 250v500 ac/dc, qty- 03 nos, (40) capillary 5 way, qty- 01 nos, (41) cfl 4 pin, qty- 50 nos, (42) deep freezer, 100/200 ltr, qty-01 nos, (43) condenser motor 3 ph 415v, qty- 10 nos, (44) mono block pump 3 ph 415v, qty-10 nos, (45) cooling coil lhb, qty-04 nos, (46) condenser coil lhb, qty-04 nos, (47) contactor k44 200a, qty-33 nos, total qty-11720 kg(11.720mt), location- coaching depot indore. mode of delivery by actual weighment basis and on as is where is basis, cutting permitted, custodian- sse-ac-tl-indb, fdp-50 days. note- original e-waste certificate cum passbook will be required at the time of delivery.

Central Government/Public Sector

CTN :45339271

10 Jun, 2026 NA

Katni - Madhya Pradesh

Tender For supply of silica gel breather 500g capacity suitable for auxiliary transformers as per rdso spec:et_psi_15_with_a_and_c_slip_no_01 or latest, with uv proof polycarbonate body, aluminium top, bottom and nitrile rubber gaskets with silica gel to suit 1/2 inch bsp threaded pipe. thickness of aluminium top and bottom should be 2mm. supplier should submit type test certificate from nabl/ilac accredited lab andtest certificate of all raw material used for fabrication of breather. height of breather 200 mm and diameter120 mm. suitable for auxiliary transformers. the sample should be approved by the consignee before rites / tpi inspection. [ warranty period:30 months after the date of delivery] [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45329483

17 Jun, 2026 12.61 Lacs

Nagrota - Himachal Pradesh

Tender For provision of 01 x 30 kva genr with connected items as standby power requirements for sewage treatment plant under age (i) bhalra - supply, installing, commissioning and testing, water cooled, sound proof silent type, turbo charged, diesel engine driven generating set 30 kva (at 0.8 pf), 415v, 3 phase, 4 wire engine as per is: 10001/10002 and alterator as per is: 13364, complete with relay panel for automatic starting on mains failure, control panels having meters in an integral acoustic enclosure as per recommendation cpcb norms, comprising of the following:notes: quoted rates shall deemed to include the following also:-(i) supply of t and p and normal space ie., bi-hexagonal ring spanner set of 12 pieces - 01 set.(ii) fuel measuement gauge - 01 no, hand operated fuel lifting pump with steel pipe 40mm dia - 01 no, hydro meter - 01 no, set of fan belt, oil/ fuel filters initial filling of coolant (coolant-2liters).(iii) service maintenance manual along with cat part list and price list - 03 set each.(iv) make of engine and alternator will be got approved from age (i) bhalra before placing the order., (a) diesel engine. diesel engine developing suitable bhp, 1500 rpm inclusive of the following standard accessories:(i) radiator/ heat exchanger cooling system. (xiv) battery charging generator.(ii) spider coupling guard. (xv) industrial silencer.(iii) fly wheel. (xvi) lubricant oil cooler.(iv) fly wheel housing complete with starter gear ring and coupling. (xvii) flexible pipe for silencer. (v) fuel pipes. (xviii) battery volt meter.(vi) air cleaner. (xix) water temperature gauge, lub oil pressure (vii) fuel and lubricant oil filter. gauge.(viii) by pass filter. (xx) speedo meter and engine running hours meter.(ix) coolant inhibitor. (xxi) display for fault.(x) fuel pump. (xxii) turbo charger.(xi) water pump. (xii) lubricant oil pump.(xiii) self/electric starter.(b) alternator : synchronous alternator 3 phase 4 wire, 50 cycles 1500 rpm, self excited, self regulated, brushless type, 0.8 pf, 415v, ac supply, 30 kva capacity, copper wound, complete including necessary tools, mounted on strong rigid steel fabricated base frame and directly coupled through flexible coupling with diesel engine, complete all as specified and directed., (c) amf/ control panel : amf panel factory made of suitable capacity as per original equipment manufacturer make and specification or as approved by oem for dg set of capacity 30 kva of suitable size, indoor cubical type, front and back openable fabricated out of mild steel sheet 1.6mm thick grounted in floor with adequate pcc foundation and minimum consisting of following :(i) contactor of suitable size for 30 kva dg set.(ii) copper bus bar of suitable current rating and sensitivity relay set unit with auxiliary cts.(iii) electronic latch circuit with tripping indication.(iv) re-set facilities.(v) 3 phase mvr relay unit with single phase protection complete with 2 no nc auxiliary contacts.(vi) 3 phase avr relay unit complete.(vii) self sequential starting relay unit 12 volts dc complete with alarm and power contactor. (viii) electronic timer 220 volts for main contactor with 1 no nc auxiliary contactor.(ix) electronic timer 220 volts for fuel cut off operation with 1 no auxiliary contactor.(x) battery charging 2x12 volts 10 amp complete with digital voltmeter and amps meter, including trickle and boost charging, make : su-kam, amco, exide or any other make as recommended by the manufacturer.(xi) volt meter 0-500 volts panel mounting of size 96mm square with selector switch digital type.(xii) amps meter 0-100 amps with 3 nos cts, 400/5 and selector switch 96 mm square digital type.(xiii) frequency meter (45-55) hz, 415 volt, 96mm square digital type.(xiv) the amf panel should have manual by pass arrangement too in case of failure of amf panel., (d) fuel tank of capacity as per manufacturer recommendations.(e) base frame made out of suitable channel duly reinforced and provided with adequate numbers of anti

Central Government/Public Sector

CTN :45332200

02 Jun, 2026 NA

Chandrapur - Maharashtra

Tender For providing of facility management services - lumpsum based - industrial; job contract for supply and replacement of 50mm water cooling pipelines at saf-i,ii&iii and replacement of filter bags of saf-iii fume extraction system; consumables to be provided by service..

corporations/Associations/Others

CTN :45345525

15 Jun, 2026 11.87 Lacs

Sonbhadra - Uttar Pradesh

Tender For supply of oh of bfp upto balancing disc , inspect or rect of fault of bfp mtr de brg , inspect or rect of fault of bfp mtr nde brg , inspect or rect of fault of bfp suc end brg , inspect or rect of fault of bfp dis end brg , oh of bfp booster pump , complete oh of cep , bfp lub oil clr ht or oil or stm wash of bunch , bfp wkg oil clr ht or oil or stm wash of bunch , clean of bcw cooing line of bfp bstr , revision or check of tube of swc heat exch , revision or check of tube of bcw heat exch , revision or check of tube of sw heat exch , clean of str of cep a or b or c , oh of cw bstr pump , oh of h2 gas cooling pump , oh of bcw pump , oh of swc pump , oh of sw pump , oh of hdrazene dozing pump , oh of phoshphate dozing pump , clean of suc str of bfp , clean and inside paint of cond recov tank , clean and inside paint of cst , clean and inside paint of bcw tank -4 mtr , clean and inside paint of bcw overhead tank , clean and inside paint of phoshphate tank , clean and inside paint of hydrazene tank , clean and inside paint of swc tank , oh of internal of hyd cplg , fab or repl of bfp cooling hdr inlet , fab or repl of bfp cooling hdr outlet , oh of drip pump , alignment of hyd cplg with mtr and pump , cleaning of cooling line of drip pump , revision or repl of worn out thrust pad bfp , fab of seal wtr clr body and fit tube nest , repl of inside stator assy of bfp , re adjust of brg for repl of bfp motor , straightening of cep shaft and rect thread , fab of expander bellow and fitting , installation of fab seal wtr cooler , installation of overhauled cep , install or erecction of fab or rep lub oil clr , installion of sw heat exchanger , inspec or rect of cep brg , revision and check of cntl block of scoop , oh of air washer blower , oh of air washer pump , tank clean or repl of nozle oh filter and valve ) /bid number : gem/2026/b/7549166 * /dated: 27-05-2026 & & / bid document 1 / 31

CTN :45328829

10 Jun, 2026 NA

Madurai - Tamil Nadu

Tender For supply of equipment for cnc lab in mechanical department - list of equipment, hydraulic cylinder double acting hydraulic cylinder, bore 40 50 mm, stroke 200 300 mm, working pressure up to 100 160 bar, steel tube with honed bore, hard chromed piston rod, front & rear end caps, piston with seals and wear rings. supplied as standalone unit with suitable mounting for dismantling, inspection and reassembly., hydraulic operated directional control valves (dcv)manually operated 3/2 or 4/2 way spool type hydraulic directional control valve, nominal size ng06 (cetop 3) or equivalent, rated pressure 210 bar, flow 20 40 lpm; valve body with hardened and ground spool, centering springs, ports p a b t clearly marked. supplied on small mounting plate for dismantling, inspection and assembly practice., 3d printerbuild volume(wxdxh) 256 x 256 x 256 mm *shell enclosed (plastic & glass)hot end all-metalnozzle 0.4 mm stainless steel includedmax hot end temperature 300 nozzle diameter 0.4 mm (included) 0.2 mm, 0.6 mm, 0.8 mm (optional)build plate compatibility textured pei plate, cool plate, engineering plate, high temperature platemax build plate temperature 100 max speed of tool head 500 mm/smax acceleration of tool head 20 m/s supported filament pla, petg, tpu, pva, pet, abs, asachamber monitoring camera low rate camera 1280 x 720/0.5fps timelapse supportedfilament run out sensor yescontrol board fan closed loop controlauxiliary part cooling fan closed loop controlair filter activated carbon filter - list of equipment, hydraulic cylinder double acting hydraulic cylinder, bore 40 50 mm, stroke 200 300 mm, working pressure up to 100 160 bar, steel tube with honed bore, hard chromed piston rod, front & rear end caps, piston with seals and wear rings. supplied as standalone unit with suitable mounting for dismantling, inspection and reassembly., hydraulic operated directional control valves (dcv)manually operated 3/2 or 4/2 way spool type hydraulic directional control valve, nominal size ng06 (cetop 3) or equivalent, rated pressure 210 bar, flow 20 40 lpm; valve body with hardened and ground spool, centering springs, ports p a b t clearly marked. supplied on small mounting plate for dismantling, inspection and assembly practice., 3d printerbuild volume(wxdxh) 256 x 256 x 256 mm *shell enclosed (plastic & glass)hot end all-metalnozzle 0.4 mm stainless steel includedmax hot end temperature 300 nozzle diameter 0.4 mm (included) 0.2 mm, 0.6 mm, 0.8 mm (optional)build plate compatibility textured pei plate, cool plate, engineering plate, high temperature platemax build plate temperature 100 max speed of tool head 500 mm/smax acceleration of tool head 20 m/s supported filament pla, petg, tpu, pva, pet, abs, asachamber monitoring camera low rate camera 1280 x 720/0.5fps timelapse supportedfilament run out sensor yescontrol board fan closed loop controlauxiliary part cooling fan closed loop controlair filter activated carbon filter

CTN :45309295

15 Jun, 2026 7.50 Lacs

Murshidabad - West Bengal

Tender For procurement of miscellaneous items under ahpem area for the upcoming oh of unit2, august 2026 of sgtpp., tube,pu,12mmx8mm for impulse line kbl tube,pu tube,12mm x 8mm,make-kbl, coil,for solenoid valve,6w,240v ac # rotex, sov,with coil,51440a-6-2g+220v ac-16-h for ahp 5/2 way, single solenoid valve, make: rotex, cylinder size-2.5inborex6instroke # ( cylinder size-2.5 in bore x 6 in stroke ), power cylinder bore size 102mm, ( cylinder 4" bore x 5" stroke air cylinder, spring loaded ), motor terminal block for 18.5kw #, motor terminal block # ( motor terminal block for 160kw motor ), motor terminal block # ( motor terminal block for 90kw motor ), pu fittings:1/4" npt (m)x12 mm od # aeroflex pu fittings: 1/4" npt (m) x 12 mm od,make: aeroflex# for air line connection sgtpp1# for air line connection sgtpp1, connector,pu straight push,1/2" - 12mm # aeroflex for instrument air line sgtpp1, pu straight push connector,1/2" ~ 12mm,make-aeroflex, silica gel,size:2 to 4mm # for power transformer sgtpp1, indicating type: blue,is 3401-1990 packed in 20/25 kg air tight fibre drum of adhesive/joiners/silic a gel, silica gel breather with al fittings # # for tr set of esp sgtpp1, dc mcb,2pole,10 amp,10ka,250 v dc #, mcb,2p,6a,220/240v dc,type:c #, mcb, 220vdc, 10a, dp,10ka, with add on for foph & esp pmcc & mcc abb, panel cabin fan # rexnord panel cabin fan> 4" : 230v ac make-rexnord, cleaner wd no 40, mccb,ns250sx3p92601,220a,3 pole # with aux.sw (of29450)-1no,extended rotary handle (btp29338) ( make: merlin gerin ), earth fault relay, compact ns, vigi/mh, vacuum p/p, recovery wp module merlin gerin ns 250, 200/440v, 50 hz, 0.03/10 a , 0 - 310 ms, ma 220 , 250 a , make - merlin gerin, power contactor , lc1 -d50 u5 swp,clear wp,lp,baotp,siloblr,esp blr,esp htr telemecanique coil voltage - 240 v ac,65a,3p,in built 1 no + 1 nc , make - telemecanique, hrc fuse, cylindrical,4a ( fuse 4 a, hrc fuse , type ns 4 make: any ), hrc fuse, cylindrical,6a ( fuse 6 a, hrc fuse , type ns 6 make: any ), hrc fuse:10a # ( fuse 10 a, hrc fuse , type ns 10 make: any ), hrc fuse 32a # standard for 80ka, ( fuse 32 a, 415v ac , type hf 14*51 make: any ), hrc fuse 16a # ( fuse 16 a, hrc fuse , type ns 16 make: any ), mnx80a,power contactors ac coils ( power contactor ,mnx 80 c oil voltage - 240 v ac with add on block mnx a1 ( 2no+2nc) (1 no.) make: l&t ), mnx70 power contactor 415v 70a ac # ( power contactor ,mnx 70 coil voltage - 240 v ac with add on block mnx a4 ( 1no+1nc) (1 no.) make: l&t ), mcb,c10 2pole 415v ac # ( mcb c10 ,2 pole,ac make siemens ), mcb,c10,1 pole,din rail # item pt. no.:c60h1p10ac ( mcb c10 ,1 pole,ac make: siemens ), mcb,c32,2 pole,din rail # item pt.no.:c60h2p32ac ( mcb c32 ,2 pole,ac make: siemens ), mcb dp 20a,c curve ( mcb c20 ,2 pole,ac make: siemens ), mcb,240-415vac,c16,2 pole,din rail # mounted,10ka ( mcb c16 ,2 pole,ac make: siemens ), mcb 3 pole c10 415 v ac ( mcb c10 ,3 pole,ac make: siemens ), mcb, 220vdc, 32a, dp,10ka, with add on for foph & esp pmcc & mcc abb

CTN :45309335

13 Jun, 2026 14.13 Lacs

Murshidabad - West Bengal

Tender For procurement of miscellaneous items for unit 4 overhauling, sgtpp - sgtpp, air filter, complete set, 250 srs filter for paph/saph [500 mw boiler] air motor veljan , port size 1inch bspt (body ported), max pressure10 bar having 40 micron sintered bronze filter element with manual drain, alumin wl & nitrile seals ( (oil side set) ), bowl of air filter for air motor of paph/saph [500 mw boiler] veljan with manual drain suitable for 250 srs filter,moc: poly carbonate. ( (oil side) ), silencer (pn:400450035) for air motor of paph 400450035 iec dusterloh ( for paph & saph air motors ), hose barb/nipple size 3/4" mnpt x 1/2" ( hose nipple 1/2 "x 1/2 "-120 nos and hose nipple 3/4 "x 1/2 "-80 nos. outer thread at one end and one end will be fitted with 1/2" rubber hose moc: ms application area: air boosting line at mrhs [quoted as per additional text description] ), needle valve,ss316 ( size: inch 3000 psi ,moc ss 316, ferrule end connection make:baldota. [quoted as per additional text description] ), flexible hose, id-12.7 mm, l-613 mm, for oil gun 500mw boiler , moc: ss 304, ms split pin # ( ms split pin, size: 4x80 [quoted as per additional text description] ), split pin # ( ms split pin, size: 3x80 [quoted as per additional text description] ), rubber hose size 1/2" ( 1/2 inch flexible rubber hose. moc: high quality braided rubber application area: at dome cooling water line of mrhs. [quoted as per additional text description] ), jubilee clamp; size: 1 ( jubilee clamp: 1/2 inch application area: at hose of air boosting line at mrhs. moc: gi [quoted as per additional text description] ), expansion joint,mrs,mill xrp 1003 for mill xrp 1003 dia- 241 mm., length- 210 mm. ( expansion joint,mrs,mill xrp 1003 for mill xrp 1003 dia- 241 mm., length- 210 mm. with extra flange attached with inner sleeve,pressure rating - 3.5 kg medium - coal reject. minimum temp to be withstood-300 deg c. ), hose, seal air, mill xrp 1003 ss flexible hose, od - 64 mm. length - 900 mm.both side hex nut socket fittings, filter,suction,600x600x50mm,ss net 3layers,5 micron ( application: for ac & dc scanner air fans ), loctite super glue in tubes 013 gms/2gm tube ( loctite sl 5910 each contains: (300 ml) [quoted as per additional text description] ), loctite 270 (thread lock) # ( loctite 241 each contains: (50 ml/51.3 g) [quoted as per additional text description] ), stainless steel net, width:470mm for 500 mw boiler trough seal , wire thickness: 5 mm, square gap:11 mmx11mm, moc: ss 416., lubricating paste altemp q nb 50 for pa & fd fan make- kluiber ( total 5 nos of tubes. each tube contains 80 gm ), strainer for blowdown transfer pump part no-15 wpil pump model: vo wpe 80-400/ 100-320,drawing no. bvk-50150-151/50152-153/50154-155, moc:ms ( application: boiler blowdown pump moc: ms ), shaft set,moc- ss410,vo wpe 100/320 for blowdown transfer pp vo wpe 80/400 & 100/320 pt no-7 wpil for pp sl no. bvk-50150-151/bvk-50152-153/bvk-50154-155 ( 4 sets: slightly larger, 2 sets: slightly smaller dimension as per drawing ), screw,self drill,washer,5.5x25mm ( hex flange head-pvc washer blue zinc coated-coarse thread size: 5.5x14x25 mm make: welfast ), coupling sleeve for blowdown transfer pump wpil part no-21 wpil pump model: vo wpe 80-400/ 100-320,drawing no. bvk-50150-151/50152-153/50154-155,wpil,moc: ss 410 ( shaft sleeve /coupling sleeve-a. as per drawing of boiler blow down pumps spares ), shaft sleeve for blowdown transfer pump wpil part no-19 wpil pump model: vo wpe 80-400/ 100-320,drawing no. bvk-50150-151/50152-153/50154-155, moc: ss 410 ( shaft sleeve-b. as per drawing of boiler blow down pumps spares. ), rubber bearing ( rubber bush/cut less bearing, moc:inner: teflon, outer: brass (copper-85%, tin-85%, lead-85%, zinc-85%). as per drawing of boiler blow down pump#s spares (larger-10+smaller-5) ), bush bearing/ b. housing for blowdown transfer pump wpil part no-20 wpil pump model: vo wpe 80-400/ 100-320,drawing no. bvk-50150-151/50152-153/50154

CTN :45307420

03 Jun, 2026 NA

Dehradun - Uttarakhand

Tender For supply of mounting eng front , fan eng cooling , air filter , fuel filter , ac filter , oil filter , speedometer head , assy clutch pressure plate , assy clutch disc 330 dia , fly wheel assy

Central Government/Public Sector

CTN :44992595

10 Jun, 2026 NA

Katni - Madhya Pradesh

Tender For corrigendum : supply of silica gel breather 500g capacity suitable for auxiliary transformers as per rdso spec:et_psi_15_with_a_and_c_slip_no_01 or latest, with uv proof polycarbonate body, aluminium top, bottom and nitrile rubber gaskets with silica gel to suit 1/2 inch bsp threaded pipe. thickness of aluminium top and bottom should be 2mm. supplier should submit type test certificate from nabl/ilac accredited lab and test certificate of all raw material used for fabrication of breather. height of breather 200 mm and diameter 120 mm. suitable for auxiliary transformers. the sample should be approved by the consignee beforerites / tpi inspection. [ warranty period:30 months after the date of delivery ]

Silica Gel Breather Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector