Tender For supply of filter assly. for traction motor ventilation. specn/drg/ no.- as per clw specn. no. clw/ ms/3/012, part i, ii,iii, alt-6 with latest alteration and clw drg. no. 1209.11-135.122, alt-2 with latest alteration, abb drg. no. ia111-00002, alt-4 with latest alteration. [ warranty period: 30 months afte r the date of delivery ]
Tender For providing of various items to drivers room and allied works at direction office, circle office and divisional office of m and hed kashmir - providing and fitting of water purifier with purifier purification stages:ro+uv+min+copper purification cartriges : 1. super sediment filter 2. carbon block filter 3. anti-scalant cartridge 4. ro membrane 5. mineral cartridge 6. copper cartridge 7. in tank uv sterilization storage tank capacity: 7 l ro membrane : 75 gpd (gallons per day) production rate : upto 15l/hr max duty cycle : upto 75 litres/day ultra violet led : 0.7 watt input voltage : 140-300 v ac / 50 hz operating voltage : 24 v dc works on tds upto : 2000 ppm, providing and fitting of graphic matting of size 14.5x 12.5, providing and fitting of floor blankets of size 14.5x 12.5, providing and fitting of shoe rack of standard size, providing and fitting of exhaust fan/ventilation fan 150mm sweep 1400 rpm , 270 cmh air delivery, 28 watt, providing, fitting of 20-watt surface led light, providing of cup set of six pieces, providing of ss rice plates, providing of ss water glass, providing of uniform for drivers, dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of engineer-in-charge: 15.10.2 in cement mortar, providing and fixing brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : cement mortar 1:6 ( 1 cement : 6 coarse sand). (jksor code-6.1.5), providing and fixing of pink marble slab plain 18 mm thick(6007a), providing and fixing 15 mm nominal bore of standard back type c.p. brass sink mixer of approved quality and make, weighing not less than 1.970 kg., providing and fixing p.v.c. waste pipe for sink or wash basin including p.v.c waste fittings complete: 18.28.1.2 40 mm dia, providing and fixing of stainless steel kitchen sink - without drain board 610x460 mm bowl depth 200 mm, providing and laying of cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 11.3.2 40mm thick with 20 mm nominal size stone aggregate., direction office/circle office / ao office, vitrified floor tiles providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete 11.52.1 size of tile 500x500 mm, providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including isi marked m.s. pressed butt hinges bright finished of required size with necessary screws.(jk sor 9.10.5) second class kail wood 35mm window size i)49"x18"- 04 no., painting wood work with deluxe multi surface paint of required shade. two or more coats applied @ 0.90litre/10sqm over anunder coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture for windows (jksor 13.57.2), renewing glass panes, with wooden fillets wherever necessary :14.7.1 float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm) 43"x13"- 02 no., providing and fitting of anodised aluminium tower bolt (barrel type) 100 x10 mm(jk sor 0702), providing and fitting of anodised aluminium handles 100 mm with plate 150x32 mm (jk sor 0704), providing and fixing bright finished steel hooks and eyes for windows, renewing double glazing glass panes argon filled for upvc windows , 20mm overall thickness along with rubber seal, servicing of upvc windows/doors which include servicing/repairs of friction stays, handles etc
Tender For corrigendum : supply of filter , supply- ac and ventilation system- air intake louver , supply- ac and ventilation system- gravity damper , supply- ac and ventilation system- axial flow supply fans- 5500 cmh , supply- ac and ventilation system- axial flow exhaust fans with flp motor -7500 cmh , spares- ac and ventilation system -v-belt for ahu blower of each type , spares- ac and ventilation system -ahu blower bearings of each type , spares- ac and ventilation system -blower motor bearing for ahu , spares- ac and ventilation system -pre filter for ahu , spares- ac and ventilation system -fine filter for ahu , spares- ac and ventilation system -relative humidity sensors , spares- ac and ventilation system - geyserstat , spares-ac and ventilation system- local humidity temperature indicators , etc- ac and ventilation system- air cooled dx type condensing unit- minimum 33 tr actual capacity , etc- ac and ventilation system- air handling unit- ahu , etc- ac and ventilation system- fresh air fan assembly , etc- ac and ventilation system- split ac unit - 2 tr , etc- ac and ventilation system- strip heaters , etc- ac and ventilation system- pan humidifier , etc- ac and ventilation system- copper refrigerant piping- suction line , etc- ac and ventilation system- copper refrigerant piping-liquid line , etc- ac and ventilation system- refrigerant gas , etc- ac and ventilation system- gss duct sheet-24 g- air conditioning system , etc- ac and ventilation system- gss duct sheet-22 g- air conditioning system , etc- ac and ventilation system- gss duct sheet- 20 g- air conditioning system , etc- ac and ventilation system-gss duct sheet- 18 g- air conditioning system , etc- ac and ventilation system-non return damper , etc- ac and ventilation system-volume control damper , etc- ac and ventilation system- fire damper , etc- ac and ventilation system- motorised actuator for fire damper , etc- ac and ventilation system- grills diffusers , etc- ac and ventilation system- accoustic insulation , etc- ac and ventilation system- thermal insulation , etc- ac and ventilation system- dp switch , etc- ac and ventilation system- air flow switch , etc- ac and ventilation system- temperature cum rh sensor , etc- ac and ventilation system- fine filter , etc- ac and ventilation system- air intake louver , etc- ac and ventilation system-gravity damper , etc- ac and ventilation system- axial flow etc fans- 5500 cmh , etc- ac and ventilation system- axial flow exhaust fans with flp motor -7500 cmh , etc- ac and ventilation system-cable laying and termination alonwith lugs glands and any other accessories
Tender For supply of set of filter assembly for three phase locomotive as per clw spec no. clw/ms/3 /012 alt-6 . each set consists of :- (i) filter assembly for machine room ventilation to clw d rg. no. 1209-11.135-121 alt-2 (qty-2 nos) (ii) filterassembly for tm ventiation to clw drg. no. 1209-11.135-122 alt-2 (qty 02 nos.) (iii) filter assembly for oil cooler ventilation to clw drg no 1209- 11.135-123 alt-3 (qty-2 nos.) [ warranty period: 30 months after the date of delivery ]
Tender For supply of hose for roof dynamic filter (hose connection oil cooler ventilation) as per clw drg. no. - 12 09-11-344-052 or latest with jublee clamp for scmrb both end as per clw dg no-1209-18.406-094 & sr.de e/tata/rs/misc/1138. [ warranty period: 30 months after the date of delivery ]