Get complete information related to latest Silt Trap Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Silt Trap Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Silt Trap Tenders.
Tender For supply of bottle jack capacity 8 ton , 0.5 inch square drive socket set , oil measuring tool , oil top up machine , multi purpose adjustable strap oil filter opener , wrench key for filters , grinding wheels , cut off wheel set , dial test indicator with magnet block , measuring jar 1 ltr , measuring jar 1 to 100 ml , two way air chuck heavy air filling nozzle , nylon rope , manila rope diameter 25mm , syringe or water filler tool for battery , continuity tester , funnel small , hydrometer , work in progress caution or danger tape , pick and hook sets , seal pick tools and o ring removers , sonic belt tensioning meter , belt tension gauge , wire rope cutters , broken screw extractor set , dynamometer heavy duty aluminum 100n and 10kg , heavy duty chain oil filter wrench with chain , hss point teq 13pcs set 13 metal drill bits , masonary drill bit set 5 pieces set , 3 pcs of 0.25, 0.375, 0.5 inch impact drive , ph2 bits screwdriver plus and minus bit , pneumatic liquid filling machine , 16 ton hydraulic crimping tool , 2in1 wide mouth fuel funnel with handle , butterfly tailoring scissors , digital inside pistol caliper , water hose pipe 1 inch length 30 mtr , qrc for pneumatic pressure point 0.5 inch , qrc for pneumatic pressure point 1 inch , air-operated pneumatic waste oil extractor , 0.25 inch socket and hex key wrench set tool kit , auto retractable hose reel 30 meter length ) /bid number : gem/2025/b/6725994 * /dated: 01-10-2025 & & / bid document 1 / 37
Tender For dismantaling brick or stone masonary removing old c.p. earth work sand filling c.c. 2.5 cm dpc, brick work 12,, thick c.p., priming one coat and wall painting 2 coat. fiixing of m.s.door, fixing of tiles, gci sheet fixing and m.s. pipe fitting
Tender For dismantaling brick or stone masonary removing old c.p. earth work sand filling c.c. 2.5 cm dpc, brick work 12,, thick c.p., priming one coat and wall painting 2 coat.
Tender For supply of annual civil maintenance works at ucil narwapahar township for one year - earth work in excavation by mechanical means hydraulic excavator manual means over areas exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by engineer-in-charge. all kind of soil , filling available excavated earth excluding rock in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. , providing and laying cement concrete in retaining walls, return walls, walls any thickness including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing a 1 ratio 3 ration 6 1 cement 3 coarse sand 6 20 mm stone aggregate nominal size , reinforced cement concrete work in beam,suspended floors,roofs, having slope up to 15 landings balconies, shelves,chajja,lintel,band,plain window sills,stsiarcase and spiral stair case above plinth level upto floor five level execluding the cost of centering,shuttering,finishing and reinforced with 1 ratio 1.5 ratio 3 1 cement 1.5 coarse sand 3 graded stone aggregate., centering and shuttering including strutting, propping etc. and removal of form for a) suspended floors, roofs, landing, balconies and access platform , steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. a) thermo-mechanically treated bars of grade fe-500d or more. , brick work with common burnt clay f.p.s. non modular bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and sizes in a cement mortar 1 ratio 6 1 cement 6 coarse sand , brick work with common burnt clay f.p.s non modular brick of class designation 7.5 m superstures above plinth level up to floor v level in all shape and size in cement mortar 1 ratio 6 1 cement 6 coarse sand , half brick masonary with common burnt clay f.p.s non modular bricks of class designation 7.5 in superstures above plinth level up to floor v level cement mortar 1 ratio 4 1 cement 4 coarse sand, 12 mm cement plaster of mix 1 ratio 6 1 cement 6 fine sand rate for external plastic are for height upto 10 from grond level in less otherwise stated., repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq.mt and under incldingcutting the patches in proper shape raking out joints and preparing and plastering the surface of the walls complete as per directions of engineer-in -charge., neat cement punning. , providing and fixing 1st quality ceramic glazed floor tiles conforming to is 15622 thickness to be specified by the manufacturer of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by engineer in charge in skirting, risers of steps and dados over 12 mm thick bed or cement mortar 1 ratio 3 1 cement 3 coarse sand and jointing with grey cement slurry at the rate 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. , white washing with lime to give an even shade a) satna lime wash on walls with one coat. , white washing with lime to give an even shade old work one or more coats, finishing walls with water proofing cement paint of required shade new work two or more coats applied at the rate 3.84 kg per 10 sqm , distempering with 1st quality acrylic distemper ready made having voc content less than 50 gm per ltr. of approved manufacturer and of required shade and colour complete as per manufacturers specification. one or more coats on old work , painting with synthetic enamel paint of approved brand and manufacture of req
Tender For balance work of spedu to satchali bridge path km 0/000 to 34/00 (sw- cutting in earth work, chiseling work and dry rubble masonary) (deposit)
Tender For corrigendum : annual rate contract for maintenance of electrical equipments - laying of 11/3.3 kv pvc/ xlpe/pilcaa cable of aluminium/copper conductor of size 3 x 70 sq. mm. to 3 x 400 sq. mm., in trays, structures, pipes, poles, trenches etc of any size as per scope of work, laying of 1100v grade pvc/ xlpe/pilca cable aluminium/copper conductor in trays, structures, pipes, poles, trenches etc of following sizes as per scope of work, cable up to & including 3/4x25mm2,control cables & telephone cables of all sizes with clamping etc., same as 2.00 but above 3/4x25mm2 to & including 3/3.5x70mm2 with clamping etc., same as 2.00 but above 3/3.5x70mm2 to & including 3/3.5x185mm2 with clamping etc., same as 2.00 but above 3/3.5x185mm2 to and including 3/3.5x400mm2 with clamping., laying of 11/3.3 kv pvc/pilcaa/xlpe armoured power cable of any size under the ground including supply of bricks and sand as per scope of work, laying of 1.1 kv pvc/paper insulated / armoured power cable under the ground including supply of bricks and sand if required of following sizes as per scope of work:-, cable up to & including 3/4 x 50 mm2, telephone cable/ control cable of any size, -do- but successive cables., above 3/4 x 50mm2 to & including 3/3.5x185mm2, -- do- but successive cables, above 3/3.5x185mm2 to & including 3/3.5x400mm2., -- do- but successive cable., removing, rolling & shfting to main/site store as per requirement, of 1.1kv/ 3.3kv/ 11kv pvc/ pilca/ xlpe underground cable of size as per scope of work:, up to & including 3/4x 70mm2, control cable/ telephone cable of any size, -- do- but successive cables., all sizes above 3/3.5x 70mm2, --do- but successive cables., removing of 1.1kv/ 3.3kv/ 11kv pvc/ xlpe/ pilca cable from trenches, trays, pipes or structures of size as per scope of work:, up to & including 3/4x70mm2, control cable/ telephone cable of any size, all sizes above 3/3.5x70mm2, supply, fixing, replacement of varnished teak wood batten / isi marked pvc casing caping including supply of link clips, plastic sleeves, screws/ nails, u & t shape bends etc of following sizes:-, 12mm x 12mm, 19 x12mm, 25mm x12mm, 38mm x12mm, 50mm x 12mm, supply & laying of 25mm conduit in brick masonary/rcc wall or over the wall/rcc column etc- pvc conduit. 2.0 mm thickness., supply, installation, testing and commissioning of earth pit station with 100 mm dia, 3 mtr long g.i pipe and connected civil masonary work with two nos.rcc slabs of size 1000x500mm, supply and fixing/replacement of ms board 2mm thick/ varnished teak wood board free from crack and knots on flush mounting or double hinged on surface mounting if required, of following sizes without sunmica sheet., 175x100x50mm(7x4x2"), 250x200x50mm(10x8x2), 100 x 100 x 50 mm(4"x4"x2"), supply and fixing of white glazed sunmica sheet 3mm thick suitable for boxes of following sizes.the job also includes cutting of sheet and fixing of switches,sockets, mcb as required at site., 175x100x50mm(7x4x2"), 250x200x50mm (10x8"x2"), 100x100x50 (4"x4"x2"), sheets of various sizes as per the requirement at site., supply fixing, mounting of piano / tumbler type switch/socket /top/ batten holder / ceiling roses / push button for call bells , anchor / ssk/girish/havells/leader make as required as detailed below :-, 5 amp piano / tumbler type switch., 5 amp piano/ tumbler type call bell push button., 5 pin 5 amp flush/surface mounted socket/ telephone socket & top., 15 amp piano/ tumbler type switch, 5 pin 15 amp/ 5-15a combined flush/surface mounted socket., angle holder / batten holder / pendant holder etc., ceiling rose 5 amps 2 plate., supply and fixing of superior quality varnished teak wood round block free from crack & knots 75mm dia., supply / laying / rewiring and termination of pvc insulated /sheathed copper conductor wire, isi mark of following sizes on the existing teak wood batten/pvc casing caping/conduit including supply of wiring clips, m.s. sc
Tender For procurement of spares for hea (high energy arc) igniters installed in boilers of both units at stpp, jaipur, mancherial, telangana. - roof bolts, m.s. bolts & nuts, rivets, washers & screws, dog nails, fish plates, nuts & bolts for fish plates, belt jointing pins, cable hooks and signal hooks, belt conveyor rollers, belt sections, resin capsules, cement capsules, gi canisters, blasting gallery – spacers, radiator repairs, repairs and rewinding of motors of ac & dc, repairs / rewinding of transformers (welding / lighting/ power), gi wire, wire mesh for longwall salvage, manufacturing of supply of electrical coils for, i) ac motors up to 6.6 kv grade, ii) transformer coils up to 33 kv grade, repairs of rotors for electric motor, lighting cable, steel chock manufacturing, house wiring, all types of fan repairs, shovel bucket welding, repairs of pumps, couplings manufacturing, special steel and alloy castings (tooth points, track pads, mn steel, casting), manufacturing of fly ash bricks. (not to be manufactured at stores site. it, shall be at their own site)., manufacturing of pump components (spares)., transformer oil filtration, reconditioning of drill bits and drill rods, vulcanizing the old trailing cables of drill machines, sdls, lhds, etc., work should be carried out at the respective mine premises)., manufacturing of earth clamps, g.i flats, g.i bolts and nuts., crimping of hydraulic hoses., repairs to hydraulic pumps, motors, control valves and other related, components, refurbishing of lt & ht switches with oem spares including testing., manufacturing / repairs of slip rings & d-contacts., furniture repairs i.e., cane chairs, table, almirahs, etc., repairs to wet grinders, water purifiers, and water coolers, manufacturing of coupling bolts of all sizes, fabrication of oht line components like cross arms, clamps, stay wires,, cross brassings, base plates etc., manufacturing of haulage rope drum rollers., all sizes of ventilation doors., safety boards designing/stickering/painting with retro-reflective radium, papers/paint on hemm/radium stickering in underground & surface,, radium boards, safety boards & radium jackets, fabrication of lighting & cable cross over towers, maintenance & repairs of air conditioners on hemm, painting work in underground and on surface, fabrication and erection of ms structural works like gantry, bunker etc., tailoring works at hospitals & area workshops, manufacturing of hume pipes, clay pills manufacturing, maintenance of pmts/lighting transformers/power transformers & substations, erection/renovation of residential/pmts/sb-station earth pits, (conventional type/chemical type), testing of all protective relays & mprs, tub assembling/repairing of coal tubs in mines, ci casting works like ci pulley, tub wheels, outsourcing works in mines, like masonary walls construction, surface, material loading, cleaning and dusting in underground etc., all types of computer software installation, antivirus, hardware and, network installation., cc cameras installation and repairs.
Tender For bid document for construction work for rubble masonary drain from near ongc nala towards karjan road railway fatak (phase-3) at padra nagarpalika under: swarnim jayanti mukhya mantri saheri vikas yojana and 15 th finanace commission grant.
Tender For re routing of cables in an masonary trench for feeding of nicu/picu and group d feeder from new and old substation respectively inside the premises of north bengal medical college and hospital, dist-darjeeling. civil work nit/30/25-26